Download or read book Utilization of Third Harmonic Voltages in DC Power Generation written by Alfredo Muñoz García and published by . This book was released on 1995 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power System Harmonics written by Ahmed F. Zobaa and published by BoD – Books on Demand. This book was released on 2018-05-30 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excessive utilization of power electronic devices and the increasing integration of renewable energy resources with their inverter-based interfaces into distribution systems have brought different power quality problems in these systems. There is no doubt that the transition from traditional centralized power systems to future decentralized smart grid necessities is paying much attention to power quality knowledge to realize better system reliability and performance to be ready for the big change in the coming years of accommodating thousands of decentralized generation units. This book aims to present harmonic modeling, analysis, and mitigation techniques for modern power systems. It is a tool for the practicing engineers of electrical power systems that are concerned with the power system harmonics. Likewise, it is a key resource for academics and researchers who have some background in electrical power systems.
Download or read book The Electric Generators Handbook 2 Volume Set written by Ion Boldea and published by CRC Press. This book was released on 2005-11-16 with total page 993 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern world hungers for electricity. Traditionally, this hunger was sated with predominantly constant-speed-regulated, synchronous generators. However, new demands require the stable, quick, and efficient delivery and control offered by variable-speed generators. Surveying all of the technologies used to satisfy the world's demand for o
Download or read book Power System Stability and Control written by Leonard L. Grigsby and published by CRC Press. This book was released on 2007-05-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the second edition of The Electric Power Engineering Handbook, Power System Stability and Control offers conveniently focused and detailed information covering all aspects concerning power system protection, dynamics, stability, operation, and control. Contributed by worldwide leaders under the guidance of one of the world's most respected
Download or read book Variable Speed Generators written by Ion Boldea and published by CRC Press. This book was released on 2015-09-03 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Variable Speed Generators, the second of two volumes in the Electric Generators Handbook, provides extensive coverage of variable speed generators in distributed generation and renewable energy applications around the world. The book delves into the steady state, transients, control, and design of claw-pole-rotor synchronous, induction, permanent-magnet-(PM)-assisted synchronous, and switched reluctance starter alternators for electric hybrid vehicles. It discusses PM synchronous, transverse flux PM, and flux reversal PM generators for low-speed wind and hydro energy conversion. It also explores linear motion alternators for residential and spacecraft applications. Numerous design and control examples illustrate the exposition. Fully revised and updated to reflect the last decade’s worth of progress in the field, this Second Edition adds new sections that: Address the ride-through control of doubly fed induction generators under unbalanced voltage sags Consider the control of stand-alone doubly fed induction generators under unbalanced nonlinear loads Detail a stand-alone squirrel cage induction generator (SCIG) with AC output and a low-rating pulse-width modulated (PWM) converter Present a twin stator winding SCIG with 50 percent rating inverter and diode rectifier, and a dual stator winding induction generator with nested cage rotor Examine interior permanent magnet claw-pole-alternator systems for more vehicle braking energy recuperation, and high power factor Vernier PM generators Depict a PM-assisted reluctance synchronous motor/generator for an electric hybrid vehicle, and a double stator switched reluctance generator with segmented rotor Describe the grid to stand-alone transition motion-sensorless dual-inverter control of permanent magnet synchronous generators with asymmetrical grid voltage sags and harmonics filtering The promise of renewable, sustainable energy rests on our ability to design innovative power systems that are able to harness energy from a variety of sources. Variable Speed Generators, Second Edition supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs.
Download or read book Harmonics in Offshore Wind Power Plants written by Jakob Bærholm Glasdam and published by Springer. This book was released on 2015-10-26 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge findings regarding harmonic stability assessment for offshore wind power plants (OWPPs). It presents a timely investigation of the harmonic stability interaction between OWPPs on the one hand, and associated control systems in the wind turbines and other power electronic devices in the transmission system on the other. The book particularly focuses on voltage-sourced converter high-voltage direct current (VSC-HVDC) and static compensator (STATCOM) systems. From a practical perspective, the book reports on appropriate models for power electronic devices. It describes how the frequency domain evaluation approach can be assessed by comparing results obtained with the Nyquist stability criterion against the more detailed electromagnetic transient based model realized in the PSCAD/EMTDC simulation program. The book also provides a concise yet complete overview of large OWPPs that incorporate power electronic devices on a broad scale, and highlights selected challenges and opportunities in the context of real-world applications.
Download or read book Electric Power Generation Transmission and Distribution Third Edition written by Leonard L. Grigsby and published by CRC Press. This book was released on 2012-05-16 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from worldwide leaders in the field, the carefully crafted Electric Power Generation, Transmission, and Distribution, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) provides convenient access to detailed information on a diverse array of power engineering topics. Updates to nearly every chapter keep this book at the forefront of developments in modern power systems, reflecting international standards, practices, and technologies. Topics covered include: Electric power generation: nonconventional methods Electric power generation: conventional methods Transmission system Distribution systems Electric power utilization Power quality L.L. Grigsby, a respected and accomplished authority in power engineering, and section editors Saifur Rahman, Rama Ramakumar, George Karady, Bill Kersting, Andrew Hanson, and Mark Halpin present substantially new and revised material, giving readers up-to-date information on core areas. These include advanced energy technologies, distributed utilities, load characterization and modeling, and power quality issues such as power system harmonics, voltage sags, and power quality monitoring. With six new and 16 fully revised chapters, the book supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. New chapters cover: Water Transmission Line Reliability Methods High Voltage Direct Current Transmission System Advanced Technology High-Temperature Conduction Distribution Short-Circuit Protection Linear Electric Motors A volume in the Electric Power Engineering Handbook, Third Edition. Other volumes in the set: K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (ISBN: 9781439883204) K12650 Electric Power Substations Engineering, Third Edition (ISBN: 9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (ISBN: 9781439856291)
Download or read book Electric Generators Handbook Two Volume Set written by Ion Boldea and published by CRC Press. This book was released on 2018-10-08 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Generators Handbook, Second Edition: Two-Volume Set supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs. The first volume, Synchronous Generators, explores large- and medium-power synchronous generator topologies, steady state, modeling, transients, control, design, and testing. Numerous case studies, worked-out examples, sample results, and illustrations highlight the concepts. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds coverage of high-power wind generators with fewer or no PMs, PM-assisted DC-excited salient pole synchronous generators, autonomous synchronous generators’ control, line switching parameter identification for isolated grids, synthetic back-to-back load testing with inverter supply, and more. The second volume, Variable Speed Generators, provides extensive coverage of variable speed generators in distributed generation and renewable energy applications around the world. Numerous design and control examples illustrate the exposition. Fully revised and updated to reflect the last decade’s worth of progress in the field, the Second Edition adds material on doubly fed induction generator control under unbalanced voltage sags and nonlinear loads, interior permanent magnet claw-pole-alternator systems, high power factor Vernier PM generators, PM-assisted reluctance synchronous motors/generators for electric hybrid vehicles, and more.
Download or read book Advanced Power Electronics Converters for Future Renewable Energy Systems written by Neeraj Priyadarshi and published by CRC Press. This book was released on 2023-03-31 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book narrates an assessment of numerous advanced power converters employed on primitive phase to enhance the efficiency of power translation pertaining to renewable energy systems. It presents the mathematical modelling, analysis, and control of recent power converters topologies, namely, AC/DC, DC/DC, and DC/AC converters. Numerous advanced DC-DC Converters, namely, multi-input DC-DC Converter, Cuk, SEPIC, Zeta and so forth have been assessed mathematically using state space analysis applied with an aim to enhance power efficiency of renewable energy systems. The book: Explains various power electronics converters for different types of renewable energy sources Provides a review of the major power conversion topologies in one book Focuses on experimental analysis rather than simulation work Recommends usage of MATLAB, PSCAD, and PSIM simulation software for detailed analysis Includes DC-DC converters with reasonable peculiar power rating This book is aimed at researchers, graduate students in electric power engineering, power and industrial electronics, and renewable energy.
Download or read book Power Systems Third Edition written by Leonard L. Grigsby and published by CRC Press. This book was released on 2012-04-25 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Systems, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) covers all aspects of power system protection, dynamics, stability, operation, and control. Under the editorial guidance of L.L. Grigsby, a respected and accomplished authority in power engineering, and section editors Andrew Hanson, Pritindra Chowdhuri, Gerry Sheblé, and Mark Nelms, this carefully crafted reference includes substantial new and revised contributions from worldwide leaders in the field. This content provides convenient access to overviews and detailed information on a diverse array of topics. Concepts covered include: Power system analysis and simulation Power system transients Power system planning (reliability) Power electronics Updates to nearly every chapter keep this book at the forefront of developments in modern power systems, reflecting international standards, practices, and technologies. New sections present developments in small-signal stability and power system oscillations, as well as power system stability controls and dynamic modeling of power systems. With five new and 10 fully revised chapters, the book supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. New chapters cover: Symmetrical Components for Power System Analysis Transient Recovery Voltage Engineering Principles of Electricity Pricing Business Essentials Power Electronics for Renewable Energy A volume in the Electric Power Engineering Handbook, Third Edition Other volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K13917 Power System Stability and Control, Third Edition (9781439883204) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (9781439856291)
Download or read book Advanced Control of Grid Connected High Power Converters written by Chenghui Zhang and published by Springer Nature. This book was released on 2022-12-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The high-power grid-connected converters play a vital role in modern power system, realizing the conversion and transmission of electrical energy, and determining its safety, stability and efficiency. This book explores the advanced control strategies of high-power grid-connected converter to satisfy the high-power requirements in practical applications. Special attention is given to grid-connected converter modules in parallel operation to overcome the challenges of non-ideal power grid, power switches faults, and circulating current. Through the advanced control strategies presented in this book, the power capacity of grid-connected converter is flexibly increased with high-reliability and efficiency, thus expanding the application range of high-power converters in modern power system. To facilitate understanding, this book provides step-by-step model derivation and controller design for grid-connected converter. Meanwhile, it also provides the comprehensive simulation and experimental results to offer readers a deep insight into the control process of grid-connected converters. This book serves as a guide for electrical engineers and researchers involved in the development of high-power converters.
Download or read book Proceedings of the Third International Scientific Conference Intelligent Information Technologies for Industry IITI 18 written by Ajith Abraham and published by Springer. This book was released on 2018-12-05 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented in the main track of IITI 2018, the Third International Scientific Conference on Intelligent Information Technologies for Industry held in Sochi, Russia on September 17–21. The conference was jointly co-organized by Rostov State Transport University (Russia) and VŠB – Technical University of Ostrava (Czech Republic) with the participation of Russian Association for Artificial Intelligence (RAAI). IITI 2018 was devoted to practical models and industrial applications related to intelligent information systems. It was considered as a meeting point for researchers and practitioners to enable the implementation of advanced information technologies into various industries. Nevertheless, some theoretical talks concerning the state-of-the-art in intelligent systems and soft computing were also included into proceedings.
Download or read book The Electric Power Engineering Handbook Five Volume Set written by Leonard L. Grigsby and published by CRC Press. This book was released on 2018-12-14 with total page 3036 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electric Power Engineering Handbook, Third Edition updates coverage of recent developments and rapid technological growth in crucial aspects of power systems, including protection, dynamics and stability, operation, and control. With contributions from worldwide field leaders—edited by L.L. Grigsby, one of the world’s most respected, accomplished authorities in power engineering—this reference includes chapters on: Nonconventional Power Generation Conventional Power Generation Transmission Systems Distribution Systems Electric Power Utilization Power Quality Power System Analysis and Simulation Power System Transients Power System Planning (Reliability) Power Electronics Power System Protection Power System Dynamics and Stability Power System Operation and Control Content includes a simplified overview of advances in international standards, practices, and technologies, such as small-signal stability and power system oscillations, power system stability controls, and dynamic modeling of power systems. Each book in this popular series supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. This resource will help readers achieve safe, economical, high-quality power delivery in a dynamic and demanding environment. Volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (9781439883204) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (9781439856291)
Download or read book Innovation in Electrical Power Engineering Communication and Computing Technology written by Renu Sharma and published by Springer Nature. This book was released on 2020-02-21 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features selected high-quality papers from the International Conference on Innovation in Electrical Power Engineering, Communication, and Computing Technology (IEPCCT 2019), held at Siksha 'O' Anusandhan (Deemed to be University), Bhubaneswar, India, on 13–14 December 2019. Presenting innovations in power, communication, and computing, it covers topics such as mini, micro, smart and future power grids; power system economics; energy storage systems; intelligent control; power converters; improving power quality; signal processing; sensors and actuators; image/video processing; high-performance data mining algorithms; advances in deep learning; and optimization methods.
Download or read book Industrial Power Engineering Handbook written by KC Agrawal and published by Elsevier. This book was released on 2001-10-08 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Never before has so much ground been covered in a single volume reference source. This five-part work is sure to be of great value to students, technicians and practicing engineers as well as equipment designers and manufacturers, and should become their one-stop shop for all information needs in this subject area. This book will be of interest to those working with: Static Drives, Static Controls of Electric Motors, Speed Control of Electric Motors, Soft Starting, Fluid Coupling, Wind Mills, Generators, Painting procedures, Effluent treatment, Electrostatic Painting, Liquid Painting, Instrument Transformers, Core Balanced CTs, CTs, VTs, Current Transformers, Voltage Transformers, Earthquake engineering, Seismic testing, Seismic effects, Cabling, Circuit Breakers, Switching Surges, Insulation Coordination, Surge Protection, Lightning, Over-voltages, Ground Fault Protections, Earthing, Earth fault Protection, Shunt Capacitors, Reactive control, Bus Systems, Bus Duct, & Rising mains *A 5-part guide to all aspects of electrical power engineering *Uniquely comprehensive coverage of all subjects associated with power engineering *A one-stop reference resource for power drives, their controls, power transfer and distribution, reactive controls, protection (including over voltage and surge protection), maintenance and testing electrical engineering
Download or read book Handbook of Distributed Generation written by Ramesh Bansal and published by Springer. This book was released on 2017-03-07 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features extensive coverage of all Distributed Energy Generation technologies, highlighting the technical, environmental and economic aspects of distributed resource integration, such as line loss reduction, protection, control, storage, power electronics, reliability improvement, and voltage profile optimization. It explains how electric power system planners, developers, operators, designers, regulators and policy makers can derive many benefits with increased penetration of distributed generation units into smart distribution networks. It further demonstrates how to best realize these benefits via skillful integration of distributed energy sources, based upon an understanding of the characteristics of loads and network configuration.
Download or read book AC Power Systems Handbook written by Jerry C. Whitaker and published by CRC Press. This book was released on 2018-10-03 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sooner or later, power system protection is going to cost money. How much is entirely up to you. Setting up a safe and effective AC power system from the very beginning can help avoid costly downtime and repairs, provide backup power during system outages, and minimize workplace accidents. For the past 15 years, Jerry Whitaker's AC Power Systems Handbook has supplied industry professionals with a comprehensive, practical guide to the key elements of AC power for commercial and industrial systems. This third edition is thoroughly revised and completely reorganized to reflect the changing demands of modern power systems. To ease navigation, many sections are now presented as separate chapters filled with updated and expanded information. Most notably, the author adds heavily in the areas of transient suppression hardware, electrical system components, and power system fundamentals. Following a logical progression, coverage flows from power system operation to protecting equipment loads, selecting the right level of protection, grounding, standby power, and safety. Along the way, the author paints a clear picture of the sources of disturbances, the tradeoffs involved for different options, and the advantages and limitations of various approaches. Streamlined to be a hands-on, user-oriented guide, the AC Power Systems Handbook offers expert guidance on designing and installing a safe and efficient power system.