Download or read book Design Aspects of Used Lubricating Oil Re Refining written by Firas Awaja and published by Elsevier. This book was released on 2006-06-06 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Aspects of Used Lubricating Oil Re-Refining presents a feasible and comprehensive technology for recycling of used lubricating oils. This book discusses efficient and effective ways of reusing lubricating oil which, if implemented, will result in a better quality of life, the stability of the environment, the health of national economies and better relationships between nations. It presents essential experimental results for process designers and engineers to establish a complete process design. The conditions and behaviour in each step in the re-refining process, (dehydration, solvent extraction, solvent stripping, and vacuum distillation) are examined in order to discover ways to recover and reuse wastes that are produced by lubricating oils.•Addresses and demonstrates the current knowledge of the process behaviour and re-refining technology of used lubricating oils•Introduces background information on the lubrication, oil recycling industry outlining the major manufacturers and detailing their processes•Contains 94 figures and 22 tables that on results regarding the re-refining process behaviour of used lubricating oil
Download or read book Refining Used Lubricating Oils written by James Speight and published by CRC Press. This book was released on 2014-04-07 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Used lubricating oil is a valuable resource. However, it must be re-refined mainly due to the accumulation of physical and chemical contaminants in the oil during service. Refining Used Lubricating Oils describes the properties of used lubricating oils and presents ways these materials can be re-refined and converted into useful lubricants as well as other products. It provides an up-to-date review of most of the processes for used lubricating oil refining that have been proposed or implemented in different parts of the world, and addresses feasibility and criteria for selecting a particular process. The book begins with an overview of lubricating oil manufacturing, both petroleum-based and synthetic-based. It reviews the types and properties of lubricating oils and discusses the characteristics and potential of used lubricating oils. The authors describe the basic steps of used oil treatment including dehydration, distillation or solvent extraction, and finishing. They explore the combustion of used oil for use as fuel, covering chemistry and equipment, fuel oil properties, and combustion emissions. The book considers alternative processing options such as refinery processing and re-refining. It also reviews the major refining processes that have been suggested over the years for used oil. These include acid/clay, simple distillation, combinations of distillation and hydrogenation, solvent extraction, filtration, and coking processes. The book addresses economic, life cycle assessment, and other criteria for evaluating the attractiveness of an oil recycling project, examining various costs and presenting an economic evaluation method using an Excel spreadsheet that can be downloaded from the publisher’s website. The book concludes with a chapter offering insights on how to choose the most suitable process technology.
Download or read book Encyclopedia of Lubricants and Lubrication written by Theo Mang and published by Springer. This book was released on 2014-01-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of lubricants in virtually all fields of the engineering industry is reflected by an increasing scientific research of the basic principles. Energy efficiency and material saving are just two core objectives of the employment of high-tech lubricants. The encyclopedia presents a comprehensive overview of the current state of knowledge in the realm of lubrication. All the aspects of fundamental data, underlying concepts and use cases, as well as theoretical research and last but not least terminology are covered in hundreds of essays and definitions, authored by experts in their respective fields, from industry and academic institutes.
Download or read book Waste Engine Oils written by Francois Audibert and published by Elsevier. This book was released on 2011-04-18 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Engine Oils presents a complete description of the field of engine used oils, widely collected in the networks of services-stations and garages. It describes the manufacture of base oils in refineries, and mentions the main additives playing an essential role in the quality of the marketed finished oils. The organization of the different systems of collecting in order to obtain a waste oil regenerable or used as fuel are explained. This book covers the main operations of physical and chemical treatments required in waste oil regeneration by covering the fundamental principles techniques such as vacuum distillation, solvent deasphalting, and ultrafiltration. A wide part is dedicated to applications with the description of about twenty processes. In addition, the book describes several types of energetic valorizations which concern a quite important fraction of the collected oil volume.* Comprehensive approach of the waste oil valorization* Overview of chemical engineering operations applied to waste oil* Objective view of the given information on a subject giving rise to competitiveness between the two routes of volorization
Download or read book Refining Used Lubricating Oils written by Preeti Dhama and published by Scitus Academics LLC. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Re-refining used oil restores the chemical composition of the base oil so that it can be used to produce new lubricant products over and over again. Re-refining is an energy efficient and environmentally beneficial method for managing used oil. Instead of burning the used oil, which releases harmful emission into the atmosphere, re-refining conserves the base oil.
Download or read book Mitigating Environmental Impact of Petroleum Lubricants written by Ignatio Madanhire and published by Springer. This book was released on 2016-06-09 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores effective environmental impact mitigation for petroleum-based lubricants to reduce their negative persistence during usage and upon end-of-life disposal. The book reviews the basic tribology of lubricants as well as initiatives that may enhance the environmental and economic effectiveness of lubricating oils from the composition design perspective across industries. Considering the blending, application, and disposal of petroleum lubricants in a holistic manner, the book presents and extends current best practices that minimize or eliminate adverse environmental impact throughout the product’s life cycle. The book reviews methods including: raw material substitution, minimizing oil losses during and after manufacturing, raw material and energy consumption reduction, and environmentally friendly applications of oil disposal as ways forward for cleaner and more effective production. This book provides readers with strategies for incorporating cleaner production practices into their operations – a benefit to both environmental legal compliance and business competitiveness – all the while preserving the environment for sustainable development. The book is therefore of interest to both manufacturers and consumers in the lubricants industry.
Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Manufacturing of Petroleum Products Petroleum Waxes Greases and Solid Lubricants Solid Fuels Gaseous Fuels Gasoline Diesel Fuel Oils Automotive Diesel and Aviation Fuels Lubricating Oils and Lubricating Greases written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-05-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum waxes are semi refined or fully refined products obtained during the processing of crude oil. According to their structure they are divided into macrocrystalline waxes (paraffin waxes) and microcrystalline waxes (ceresine, petrolatum, others). Grease, thick, oily lubricant consisting of inedible lard, the rendered fat of waste animal parts, or a petroleum-derived or synthetic oil containing a thickening agent. Greases of mineral or synthetic origin consist of a thickening agent dispersed in a liquid lubricant such as petroleum oil or a synthetic fluid. Diesel fuel, also called diesel oil, combustible liquid used as fuel for diesel engines, ordinarily obtained from fractions of crude oil that are less volatile than the fractions used in gasoline. Lubricating oil, sometimes simply called lubricant/lube, is a class of oils used to reduce the friction, heat, and wear between mechanical components that are in contact with each other. Lubricating oil is used in motorized vehicles, where it is known specifically as motor oil and transmission fluid. The global wax market was valued at around USD 9 billion in 2017 and is expected to reach approximately USD 12 billion in 2024, growing at a CAGR of slightly above 3.5% between 2018 and 2024.The India lubricant market is expected to register a CAGR of 4.64%, during the forecast period, 2018-2023. The major factors driving the growth of the market are the increasing vehicular production along with the growing industrial sector. The global market for lubricants is expected to reach USD 70.32 billion by 2020. The global grease market is expected to grow at a CAGR of 2.13% during the forecast period, 2018 - 2023.Aviation fuel market size will grow by over USD 34 billion during 2018-2022 Some of the fundamentals of the book are composition of the petroleum waxes, solvent extraction, greases and solid lubricants, solid fuels, other significant tests or properties, gaseous fuels, properties of waxes, gasoline, diesel fuel oils, automotive, diesel and aviation fuels, special processes for motor-fuel blending components, crude distillation, lubricating oils, lubricating greases, nature of lubricating oils, photographs of machinery with suppliers contact details A total guide to manufacturing and entrepreneurial success in one of todayÕs most lucrative petroleum industry. This book is one-stop guide to one of the fastest growing sectors of the petroleum industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on the commercial production of petroleum products. It serves up a feast of how-to information, from concept to purchasing equipment.
Download or read book Lubricant Base Oil and Wax Processing written by Avilino Sequeira and published by CRC Press. This book was released on 1994-08-09 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides state-of-the-art information on all processes currently used to manufacture lubricant base oils and waxes-offering practical, timesaving solutions for specific on-the-job problems. Furnishes helpful lists of conversion factors, construction cost data, and process licensors, as well as a glossary of essential petroleum processing terms.
Download or read book Fundamentals of Petroleum Refining written by Mohamed A. Fahim and published by Elsevier. This book was released on 2009-11-19 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Petroleum Refining presents the fundamentals of thermodynamics and kinetics, and it explains the scientific background essential for understanding refinery operations. The text also provides a detailed introduction to refinery engineering topics, ranging from the basic principles and unit operations to overall refinery economics. The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments. This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable. - Provides balanced coverage of fundamental and operational topics - Includes spreadsheets and process simulators for showing trends and simulation case studies - Relates processing to planning and management to give an integrated picture of refining
Download or read book Handbook of Petroleum Product Analysis written by James G. Speight and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the reader to the production of the products in a refinery • Introduces the reader to the types of test methods applied to petroleum products, including the need for specifications • Provides detailed explanations for accurately analyzing and characterizing modern petroleum products • Rewritten to include new and evolving test methods • Updates on the evolving test methods and new test methods as well as the various environmental regulations are presented
Download or read book Green Extraction of Natural Products written by Farid Chemat and published by John Wiley & Sons. This book was released on 2016-03-11 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extraction processes are essential steps in numerous industrial applications from perfume over pharmaceutical to fine chemical industry. Nowadays, there are three key aspects in industrial extraction processes: economy and quality, as well as environmental considerations. This book presents a complete picture of current knowledge on green extraction in terms of innovative processes, original methods, alternative solvents and safe products, and provides the necessary theoretical background as well as industrial application examples and environmental impacts. Each chapter is written by experts in the field and the strong focus on green chemistry throughout the book makes this book a unique reference source. This book is intended to be a first step towards a future cooperation in a new extraction of natural products, built to improve both fundamental and green parameters of the techniques and to increase the amount of extracts obtained from renewable resources with a minimum consumption of energy and solvents, and the maximum safety for operators and the environment.
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Refining Used Lubricating Oils written by James Speight and published by CRC Press. This book was released on 2014-04-07 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Used lubricating oil is a valuable resource. This book examines recycling processes for a range of products with different properties and different criteria. It also compares the various recycling methods and resulting products to conventional products obtained from original refining processes. The reviews, data, and comparisons provided by the authors allow readers to identify which processes are likely to produce a product with specific properties, and enable them to combine this with an analysis of the economic data to identify attractive oil recycling propositions.
Download or read book Solvent Extraction written by Vladimir S Kislik and published by Elsevier. This book was released on 2011-11-04 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main challenge in modern solvent extraction separation is that most techniques are mainly empirical, specific and particular for narrow fields of practice and require a large degree of experimentation. This concise and modern book provides a complete overview of both solvent extraction separation techniques and the novel and unified competitive complexation/solvation theory. This novel and unified technique presented in the book provides a key for a preliminary quantitative prediction of suitable extraction systems without experimentation, thus saving researchers time and resources. Analyzes and compares both classical and new competitive models and techniques Offers a novel and unified competitive complexation / solvation theory that permits researchers to standardize some parameters, which decreases the need for experimentation at R&D Presents examples of applications in multiple disciplines such as chemical, biochemical, radiochemical, pharmaceutical and analytical separation Written by an outstanding scientist who is prolific in the field of separation science
Download or read book Chemistry and Technology of Lubricants written by R. M. Mortier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has precededan understandingofthescientificprinciples. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding ofthe chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who requirea more fundamental understanding oflubricants.
Download or read book Regular and Related Solutions written by Joel Henry Hildebrand and published by . This book was released on 1970 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
