Download or read book Pile Driving Analysis for Pile Design and Quality Assurance written by Rodrigo Salgado and published by . This book was released on 2018-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Driven piles are commonly used in foundation engineering. The most accurate measurement of pile capacity is achieved from measurements made during static load tests. Static load tests, however, may be too expensive for certain projects. In these cases, indirect estimates of the pile capacity can be made through dynamic measurements. These estimates can be performed either through pile driving formulae or through analytical methods, such as the Case method.Pile driving formulae, which relate the pile set per blow to the capacity of the pile, are frequently used to determine whether the pile has achieved its design capacity. However, existing formulae have numerous shortcomings. These formulae are based on empirical observations and lack scientific validation. This report details the development of more accurate and reliable pile driving formulae developed from advanced one-dimensional FE simulations. These formulae are derived for piles installed in five typical soil profiles: a floating pile in sand, an end¿bearing pile in sand, a floating pile in clay, an end¿bearing pile in clay and a pile crossing a normally consolidated clay layer and resting on a dense sand layer. The proposed driving formulae are validated through well-documented case histories of full-scale instrumented driven piles. The proposed formulae are more accurate and reliable on average than other existing methods for the case histories considered in this study.This report also discusses the development of a pile driving control system, a fully integrated system developed by Purdue that can be used to collect, process, and analyze data to estimate the capacities of piles using the Case method and the pile driving formulae developed at Purdue.
Download or read book Piling Engineering Third Edition written by Ken Fleming and published by CRC Press. This book was released on 2008-09-25 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piling is a fast moving field and recent years have seen major advances in theory, methods, testing procedures and equipment. Some of these changes have been driven by the need for economies and efficiency, reduced spoil production and new methods of pile bore support. Advances in theoretical analyses allow pile design to be refined so that piles and pile groups perform to better advantage. This third edition of the well established book has been comprehensively updated. It provides an accessible and well-illustrated account of design techniques, methods of testing and analysis of piles, with a marked emphasis on practice but with design methods that incorporate the most recent advances in piling theory. Piling Engineering is written for geotechnical engineers, consultants and foundation contractors. It is also a useful reference for academics and advanced students on courses in piling, practical site investigation and foundation design and construction.
Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.
Download or read book Application of Stress Wave Theory to Piles Quality Assurance on Land and Offshore Piling written by J. Beim and published by CRC Press. This book was released on 2000-01-01 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work collates the topics discussed in the sixth International Conference on land and offshore piling. It covers topics such as: wave mechanics and its application to pile mechanics; driving equipment and developments; and pile integrity and low strain dynamic testing.
Download or read book Pile Design and Construction Rules of Thumb written by Ruwan Abey Rajapakse and published by Butterworth-Heinemann. This book was released on 2016-02-20 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Design and Construction Rules of Thumb presents Geotechnical and Civil Engineers a comprehensive coverage of Pile Foundation related theory and practice. Based on the author's experience as a PE, the book brings concise theory and extensive calculations, examples and case studies that can be easily applied by professional in their day-to-day challenges. In its first part, the book covers the fundamentals of Pile Selection: Soil investigation, condition, pile types and how to choose them. In the second part it addresses the Design of Pile Foundations, including different types of soils, pile groups, pile settlement and pile design in rock. Next, the most extensive part covers Design Strategies and contains chapters on loading analysis, load distribution, negative skin friction, design for expansive soils, wave equation analysis, batter piles, seismic analysis and the use of softwares for design aid. The fourth part covers Construction Methods including hammers, Inspection, cost estimation, load tests, offshore piling, beams and caps. In this new and updated edition the author has incorporated new pile designs such as helical, composite, wind turbine monopiles, and spiral coil energy piles. All calculations have been updated to most current materials characteristics and designs available in the market. Also, new chapters on negative skin friction, pile driving, and pile load testing have been added. Practicing Geotechnical, and Civil Engineers will find in this book an excellent handbook for frequent consult, benefiting from the clear and direct calculations, examples, and cases. Civil Engineering preparing for PE exams may benefit from the extensive coverage of the subject. - Convenient for day-to-day consults - Numerous design examples for sandy soils, clay soils, and seismic loadings - Now including helical, composite, wind turbine monopiles, and spiral coil energy piles - Methodologies and case studies for different pile types - Serves as PE exam preparation material
Download or read book ICP Design Methods for Driven Piles in Sands and Clays written by Richard Jardine and published by Thomas Telford Limited. This book was released on 2005 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadening the recommendations published by Jardine and Chow in 1996, this volume provides procedures that can be applied by geotechnical engineers, supported by worked examples for sands and clays. It also offers guidance on application to a range of pile types, geotechnical profiles and loading conditions.
Download or read book Assessment of Capacity and Seismic Demand on Axially Loaded Piles in Soft Clayey Deposits written by Juan Francisco Perri and published by . This book was released on 2007 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Behavior and Characterization of Geomaterials written by Kasinathan Muthukkumaran and published by Springer Nature. This book was released on 2022-11-30 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select peer-reviewed proceedings of the Indian Geotechnical Conference (IGC) 2021. The contents focus on Geotechnics for Infrastructure Development and Innovative Applications. The book covers topics related to soil behavior and characterization of geomaterials, geotechnical, geological, and geophysical investigation of special topics such as behavior of unsaturated soils, offshore and marine geotechnics, remote sensing and GIS, instrumentation and monitoring, retrofitting of geotechnical structures, reliability in geotechnical engineering, geotechnical education, codes and standards, among others. This volume will be of interest to those in academia and industry.
Download or read book IUTAM Symposium on Exploiting Nonlinear Dynamics for Engineering Systems written by Ivana Kovacic and published by Springer. This book was released on 2019-07-24 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the IUTAM Symposium on Exploiting Nonlinear Dynamics for Engineering Systems that was held in Novi Sad, Serbia, from July 15th to 19th, 2018. The appearance of nonlinear phenomena used to be perceived as dangerous, with a general tendency to avoid them or control them. This perception has led to intensive research using various approaches and tailor-made tools developed over decades. However, the Nonlinear Dynamics of today is experiencing a profound shift of paradigm since recent investigations rely on a different strategy which brings good effects of nonlinear phenomena to the forefront. This strategy has a positive impact on different fields in science and engineering, such as vibration isolation, energy harvesting, micro/nano-electro-mechanical systems, etc. Therefore, the ENOLIDES Symposium was devoted to demonstrate the benefits and to unlock the potential of exploiting nonlinear dynamical behaviour in these but also in other emerging fields of science and engineering. This proceedings is useful for researchers in the fields of nonlinear dynamics of mechanical systems and structures, and in Mechanical and Civil Engineering.
Download or read book Analysis of Pile Foundations Subject to Static and Dynamic Loading written by Amir M. Kaynia and published by CRC Press. This book was released on 2021-08-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computational tools and design principles for piles used in a wide range of applications and for different loading conditions. The chapters provide a mixture of basic engineering solutions and latest research findings in a balanced manner. The chapters are written by world-renowned experts in the field. The materials are presented in a unified manner based on both simplified and rigorous numerical methods. The first four chapters present the basic elements and steps in analysis of piles under static and cyclic loading together with clear references to the appropriate design regulations in Eurocode 7 when relevant. The analysis techniques cover conventional code-based methods, solutions based on pile-soil interaction springs, and advanced 3D finite element methods. The applications range from conventional piles to large circular steel piles used as anchors or monopiles in offshore applications. Chapters 5 to 10 are devoted to dynamic and earthquake analyses and design. These chapters cover a range of solutions from dynamic pile-soil springs to elasto-dynamic solutions of large pile groups. Both linear and nonlinear soil behaviours are considered along with response due to dynamic loads and earthquake shaking including possible liquefaction. The book is unique in its unified treatment of the solutions used for static and dynamic analysis of piles with practical examples of application. The book is considered a valuable tool for practicing engineers, graduate students and researchers.
Download or read book Proceedings of the First Southern African Geotechnical Conference written by S.W. Jacobsz and published by CRC Press. This book was released on 2016-03-30 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First Southern African Geotechnical Conference was organised by the Geotechnical Division of the South African Institution of Civil Engineering (SAICE) under the auspices of the International Society of Soil Mechanics and Geotechnical Engineering (ISSMGE) and took place at Sun City, South Africa on 5 and 6 May 2016. More than 60 papers were rec
Download or read book ICE Specification for Piling and Embedded Retaining Walls written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition retains the three-part approach of the second edition. Part A is an introduction to the essential concepts necessary to procure a piling or retaining wall contract. Part B is the specification and is still the only part of this document intended for incorporation in contracts. Part C provides guidance for use of the specification and essential background information for specifiers and contractors alike. Unlike the second edition, Part 3 guidance notes immediately follow the relevant Part 2 specification requirements. The three sections provide the reader with a full compendium without being overly prescriptive.
Download or read book Frontiers in Offshore Geotechnics III written by Vaughan Meyer and published by CRC Press. This book was released on 2015-05-15 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Offshore Geotechnics III comprises the contributions presented at the Third International Symposium on Frontiers in Offshore Geotechnics (ISFOG, Oslo, Norway, 10-12 June 2015), organised by the Norwegian Geotechnical Institute (NGI). The papers address current and emerging geotechnical engineering challenges facing those working in off
Download or read book Geotechnical Engineering Calculations and Rules of Thumb written by Ruwan Abey Rajapakse and published by Butterworth-Heinemann. This book was released on 2011-04-08 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Engineering Calculations and Rules of Thumb offers geotechnical, civil and structural engineers a concise, easy-to-understand approach the formulas and calculation methods used in of soil and geotechnical engineering. A one stop guide to the foundation design, pile foundation design, earth retaining structures, soil stabilization techniques and computer software, this book places calculations for almost all aspects of geotechnical engineering at your finger tips. In this book, theories is explained in a nutshell and then the calculation is presented and solved in an illustrated, step-by-step fashion. All calculations are provided in both fps and SI units. The manual includes topics such as shallow foundations, deep foundations, earth retaining structures, rock mechanics and tunnelling. In this book, the author's done all the heavy number-crunching for you, so you get instant, ready-to-apply data on activities such as: hard ground tunnelling, soft ground tunnelling, reinforced earth retaining walls, geotechnical aspects of wetland mitigation and geotechnical aspects of landfill design. - Easy-to-understand approach the formulas and calculations - Covers calculations for foundation,earthworks and/or pavement subgrades - Provides common codes for working with computer software - All calculations are provided in both US and SI units
Download or read book Analysis of Laterally Loaded Piles in Multilayered Soil Deposits written by Dipanjan Basu and published by Purdue University Press. This book was released on 2007-10-01 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report focuses on the development of a new method of analysis of laterally loaded piles embedded in a multi-layered soil deposit treated as a three-dimensional continuum. Assuming that soil behaves as a linear elastic material, the governing differential equations for the deflection of laterally loaded piles were obtained using energy principles and calculus of variations. The differential equations were solved using both the method of initial parameters and numerical techniques. Soil resistance, pile deflection, slope of the deflected pile, bending moment and shear force can be easily obtained at any depth along the entire pile length. The results of the analysis were in very good agreement with three-dimensional finite element analysis results. The analysis was further extended to account for soil nonlinearity. A few simple constitutive relationships that allow for modulus degradation with increasing strain were incorporated into the analysis. The interaction of piles in groups was also studied.
Download or read book Piezocone and Cone Penetration Test CPTu and CPT Applications in Foundation Engineering written by Abolfazl Eslami and published by Butterworth-Heinemann. This book was released on 2019-11-23 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezocone and cone penetration tests (CPTu and CPT) applications in foundation engineering includes different approaches for determining the bearing capacity of shallow foundations, along with methods for determining pile bearing capacity and settlement concepts. The use of soft computing (GMDH) neural networks related to CPT records and Geotechnical parameters are also discussed. In addition, different cases regarding the behavior of foundation performance using case records, such as shallow foundation, deep soil improvement, soil behavior classification (SBC), and bearing capacity are also included. - Provides the latest on CPT and CPTu performance in geotechnical engineering, i.e., bearing capacity, settlement, liquefaction, soil classification and shear strength prediction - Introduces soft computing methods for processing soil properties and pile bearing capacity via CPT and CPTu - Explains CPT and CPTu testing methods which allows for the continuous, or virtually continuous, record of ground conditions
Download or read book Pile Design and Construction Practice Fifth Edition written by Michael Tomlinson and published by CRC Press. This book was released on 2007-12-06 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading and the structural design of piles and pile groups. Marine structures, miscellaneous problems (including machinery foundations, underpinning, mining subsidence areas, contracts and frozen ground), durability of piled foundations, ground investigations, and pile testing are also covered. It introduces the 2005 version of Eurocode7, BS 8004 and other codes, and refers to BS 6349 on maritime structures, and new forms of civil engineering contracts suitable for piling projects. It includes numerous worked examples to the codes, many based on actual problems. It also gives very comprehensive information for students.
