Download or read book Use of Control Room Simulators for Training of Nuclear Power Plant Personnel written by International Atomic Energy Agency and published by . This book was released on 2004 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: In cases where a "replica" plant-referenced full scope simulator is not available, it may be necessary for operators to receive their training with a computer simulation or to travel to another plant that has a simulator. This publication provides information and guidance on various aspects of the use of control room simulators.
Download or read book Use of Control Room Simulators for Training of Nuclear Power Plant Personnel written by Agence internationale de l'énergie atomique and published by . This book was released on 2004 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Use of Control Room Simulators for Training of Nuclear Power Plant Personnel IAEA TECDOC Series written by International Atomic Energy Agency and published by . This book was released on 2004 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISafety analysis and operational experience consistently indicate that human error is the greatest contributor to the risk of a severe accident in a nuclear power plant. Subsequent to the Three Mile Island accident, major changes were made internationally in reducing the potential for human error through improved procedures, information presentation and training of operators. The use of full scope simulators in the training of operators is an essential element of these efforts to reduce human error. In cases where a ""replica"" plant-referenced full scope simulator is not available, it may b.
Download or read book Authorization of Nuclear Power Plant Control Room Personnel written by International Atomic Energy Agency and published by IAEA. This book was released on 2006 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides guidance and a wide range of practical examples that will be helpful for both nuclear power plant (NPP) operating organisations and regulatory bodies in developing and improving the processes of authorization of control room personnel.
Download or read book Development Use and Maintenance of Nuclear Power Plant Simulators for the Training and Authorization of Personnel written by and published by . This book was released on 2021 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The use of simulators for the training and qualification of nuclear power plant (NPP) control room operating personnel has become a standard practice throughout the world to develop and reinforce knowledge of plant systems and their relationships. It is an approach to increase the ability to apply plant procedures, to advance practical skills in operating the plant in normal, abnormal and emergency conditions, and to build supervisory skills and teamwork. Simulators are also utilized to conduct the authorization or licensing examinations of control room operating personnel, and there is an increasing trend in the use of simulators for non-training purposes. This publication provides Member States with comprehensive guidance on NPP operator training and describes the use of simulators in training and qualification programmes for the personnel. Current trends in the use of simulators in training programmes, as well as approaches to maintaining and upgrading simulators, are also presented."--Publisher's description.
Download or read book Simulators for Training Nuclear Power Plant Personnel written by and published by . This book was released on 1993 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development Use and Maintenance of Nuclear Power Plant Simulators for the Training and Authorization of Personnel written by International Atomic Energy Agency and published by . This book was released on 2021-10-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of simulators for the training and qualification of nuclear power plant (NPP) control room operating personnel has become a standard practice throughout the world to develop and reinforce knowledge of plant systems and their relationships. It is an approach to increase the ability to apply plant procedures, to advance practical skills in operating the plant in normal, abnormal and emergency conditions, and to build supervisory skills and teamwork. Simulators are also utilized to conduct the authorization or licensing examinations of control room operating personnel, and there is an increasing trend in the use of simulators for non-training purposes. This publication provides Member States with comprehensive guidance on NPP operator training and describes the use of simulators in training and qualification programmes for the personnel. Current trends in the use of simulators in training programmes, as well as approaches to maintaining and upgrading simulators, are also presented.
Download or read book Guidelines for Upgrade and Modernization of Nuclear Power Plant Training Simulators written by and published by . This book was released on 2006 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of simulators for the training and qualification of control room operating personnel has become a standard practice throughout the world to develop and reinforce knowledge of plant systems and their relationships, to increase the ability to apply plant procedures, to advance practical skills in operating the plant in normal, abnormal and emergency conditions, and to build supervisory skills and teamwork. Simulators are also utilized to conduct the authorization or licensing examinations of control room operating personnel, and there is an increasing trend in the usage of simulators for non-training purposes. The simulator should be adequately maintained and upgraded to ensure that it continues to be a viable training tool that accurately replicates the operational characteristics of the reference nuclear power plant (NPP). The upgrade or modernization of the simulator should be conducted based upon the proven project management principles and methods discussed in this report. The combined simulator upgrade knowledge and experience of many NPPs and simulator vendors have been compiled, and examples of specific simulator upgrade projects are included in the appendices as well as on the attached CD-ROM.--Résumé de l'éditeur.
Download or read book Guidelines for Upgrade and Modernization of Nuclear Power Plant Training Simulators written by International Atomic Energy Agency and published by . This book was released on 2006 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying CD-ROM contains additional information.
Download or read book American National Standard for Nuclear Power Plant Simulators for Use in Operator Training and Examination written by and published by . This book was released on 1998 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Systematic Approach to Training for Nuclear Facility Personnel Processes Methodology and Practices written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-05-18 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training is an important tool to achieve and maintain the required competence of personnel working in nuclear facilities. Effective training and qualification of personnel are necessary for the achievement of high safety and efficiency standards in nuclear facility performance. Training and qualification combined is a key feature of the integrated management systems of nuclear facilities. It is these considerations that led to this publication which consolidates the experience gained worldwide using the systematic approach to training (SAT) for nuclear facility personnel. It provides a basis for establishing and sustaining the quality and reliability of training and qualification for all main categories of nuclear facility personnel. SAT has proved its effectiveness in nuclear and other safety critical industries over decades and is recognized as the best international practice in nuclear training. The publication details the processes and methodology, presents good practices and offers recommendations from the experts in the field on the entire set of activities within the SATbased training methodology and provides examples of SAT application. It builds on, and supersedes, guidance provided in an earlier IAEA publication (Technical Report Series 380, Nuclear Power Plant Personnel Training and its Evaluation: A Guidebook). A key feature of this publication is demonstrating how SATbased training serves as one of the important processes in a nuclear facility management system and how it integrates with other processes.
Download or read book Digital Full Scope Simulation of a Conventional Nuclear Power Plant Control Room Phase 2 written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy's Light Water Reactor Sustainability program has developed a control room simulator in support of control room modernization at nuclear power plants in the U.S. This report highlights the recent completion of this reconfigurable, full-scale, full-scope control room simulator buildout at the Idaho National Laboratory. The simulator is fully reconfigurable, meaning it supports multiple plant models developed by different simulator vendors. The simulator is full-scale, using glasstop virtual panels to display the analog control boards found at current plants. The present installation features 15 glasstop panels, uniquely achieving a complete control room representation. The simulator is also full-scope, meaning it uses the same plant models used for training simulators at actual plants. Unlike in the plant training simulators, the deployment on glasstop panels allows a high degree of customization of the panels, allowing the simulator to be used for research on the design of new digital control systems for control room modernization. This report includes separate sections discussing the glasstop panels, their layout to mimic control rooms at actual plants, technical details on creating a multi-plant and multi-vendor reconfigurable simulator, and current efforts to support control room modernization at U.S. utilities. The glasstop simulator provides an ideal testbed for prototyping and validating new control room concepts. Equally importantly, it is helping create a standardized and vetted human factors engineering process that can be used across the nuclear industry to ensure control room upgrades maintain and even improve current reliability and safety.
Download or read book Design and Validation of Control Room Upgrades Using a Research Simulator Facility written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1981, the United States (U.S.) Nuclear Regulatory Commission (NRC) [1] requires a plant- specific simulator facility for use in training at U.S. nuclear power plants (NPPs). These training simulators are in near constant use for training and qualification of licensed NPP operators. In the early 1980s, the Halden Man-Machine Laboratory (HAMMLab) at the Halden Reactor Project (HRP) in Norway first built perhaps the most well known set of research simulators. The HRP offered a high- fidelity simulator facility in which the simulator is functionally linked to a specific plant but in which the human-machine interface (HMI) may differ from that found in the plant. As such, HAMMLab incorporated more advanced digital instrumentation and controls (I & C) than the plant, thereby giving it considerable interface flexibility that researchers took full advantage of when designing and validating different ways to upgrade NPP control rooms. Several U.S. partners--the U.S. NRC, the Electrical Power Research Institute (EPRI), Sandia National Laboratories, and Idaho National Laboratory (INL) - as well as international members of the HRP, have been working with HRP to run control room simulator studies. These studies, which use crews from Scandinavian plants, are used to determine crew behavior in a variety of normal and off-normal plant operations. The findings have ultimately been used to guide safety considerations at plants and to inform advanced HMI design--both for the regulator and in industry. Given the desire to use U.S. crews of licensed operators on a simulator of a U.S. NPP, there is a clear need for a research simulator facility in the U.S. There is no general-purpose reconfigurable research oriented control room simulator facility in the U.S. that can be used for a variety of studies, including the design and validation of control room upgrades.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Nuclear Science and Technology written by Jeffrey Lewins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the second of our occasional departures from the format of an annual review series, being devoted to one coherent topic. We have the pleasure therefore in presenting a concerted sequence of articles on the use of Simulators for Nuclear Power. An essential attribute of a quantified engineer in any discipline is to be able to model and predict, i.e. to analyze, the behaviour of the subject under scrutiny. Simulation goes, one would argue, a step further. The engineer providing a simulator takes a broader view of the system studied and makes the analysis available to a wider audience. Hence simulation may have a part to play in design but also in operation, in accident studies and also in training. It leads to synthesis as well as analysis. There is no doubt that the massive scale and the economic investment implied in nuclear power programmes demands an increased infra-structure in licensing and training as well as in design and operation. The simulator is a cheap alter native - admittedly cheap only in relative terms - but also perhaps an essential method of providing realistic experience with negligible or at least small risk. Nuclear power therefore has led to a wide range of simulators. At the same time we would not overlook the sub stantial role played by simulators in say the aero-industry; indeed the ergonomic and psychological studies associated with that industry hold many lessons.
Download or read book Technical Basis for Physical Fidelity of NRC Control Room Training Simulators for Advanced Reactors written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this study is to determine how simulator physical fidelity influences the effectiveness of training the regulatory personnel responsible for examination and oversight of operating personnel and inspection of technical systems at nuclear power reactors. It seeks to contribute to the U.S. Nuclear Regulatory Commission's (NRC's) understanding of the physical fidelity requirements of training simulators. The goal of the study is to provide an analytic framework, data, and analyses that inform NRC decisions about the physical fidelity requirements of the simulators it will need to train its staff for assignment at advanced reactors. These staff are expected to come from increasingly diverse educational and experiential backgrounds.
Download or read book Training for Nuclear Power Plant Operation written by Institution of Nuclear Engineers (Great Britain) and published by Institution. This book was released on 1983 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: