Download or read book Innovative Waste Management Technologies for Sustainable Development written by Bhat, Rouf Ahmad and published by IGI Global. This book was released on 2019-08-30 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: A rapidly growing population, industrialization, modernization, luxury life style, and overall urbanization are associated with the generation of enhanced wastes. The inadequate management of the ever-growing amount of waste has degraded the quality of the natural resources on a regional, state, and country basis, and consequently threatens public health as well as global environmental security. Therefore, there is an existent demand for the improvement of sustainable, efficient, and low-cost technologies to monitor and properly manage the huge quantities of waste and convert these wastes into energy sources. Innovative Waste Management Technologies for Sustainable Development is an essential reference source that discusses management of different types of wastes and provides relevant theoretical frameworks about new waste management technologies for the control of air, water, and soil pollution. This publication also explores the innovative concept of waste-to-energy and its application in safeguarding the environment. Featuring research on topics such as pollution management, vermicomposting, and crude dumping, this book is ideally designed for environmentalists, policymakers, professionals, researchers, scientists, industrialists, and environmental agencies.

Download or read book Municipal Solid Waste to Energy Conversion Processes written by Gary C. Young and published by John Wiley & Sons. This book was released on 2010-11-29 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: MUNICIPAL SOLID WASTE TO ENERGY CONVERSION PROCESSES A TECHNICAL AND ECONOMIC REVIEW OF EMERGING WASTE DISPOSAL TECHNOLOGIES Intended for a wide audience ranging from engineers and academics to decision-makers in both the public and private sectors, Municipal Solid Waste to Energy Conversion Processes: Economic, Technical, and Renewable Comparisons reviews the current state of the solid waste disposal industry. It details how the proven plasma gasification technology can be used to manage Municipal Solid Waste (MSW) and to generate energy and revenues for local communities in an environmentally safe manner with essentially no wastes. Beginning with an introduction to pyrolysis/gasification and combustion technologies, the book provides many case studies on various waste-to-energy (WTE) technologies and creates an economic and technical baseline from which all current and emerging WTE technologies could be compared and evaluated. Topics include: Pyrolysis/gasification technology, the most suitable and economically viable approach for the management of wastes Combustion technology Other renewable energy resources including wind and hydroelectric energy Plasma economics Cash flows as a revenue source for waste solids-to-energy management Plant operations, with an independent case study of Eco-Valley plant in Utashinai, Japan Extensive case studies of garbage to liquid fuels, wastes to electricity, and wastes to power ethanol plants illustrate how currently generated MSW and past wastes in landfills can be processed with proven plasma gasification technology to eliminate air and water pollution from landfills.

Download or read book Energy from Waste written by Ram K. Gupta and published by CRC Press. This book was released on 2022-03-28 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conversion of waste into value-added products such as energy transforms a potential environmental problem into a sustainable solution. Energy from Waste: Production and Storage focuses on the conversion of waste from various sources for use in energy production and storage applications. It provides the state-of-the-art in developing advanced materials and chemicals for energy applications using wastes and discusses the various treatment processes and technologies. Covers synthesis of usable materials from various types of waste and their application in energy production and storage Presents an overview and applications of wastes for green energy production and storage Provides fundamentals of electrochemical behavior and understanding of energy devices such as fuel cells, batteries, supercapacitors, and solar cells Elaborates on advanced technologies used to convert waste into green biochemical energy This work provides new direction to scientists, researchers, and students in materials and chemical engineering and related subjects seeking to sustainable solutions to energy production and waste management.

Download or read book Handbook of Solid Waste Management written by Chinnappan Baskar and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Waste to Energy Conversion Technology written by Naomi B Klinghoffer and published by Elsevier. This book was released on 2013-05-15 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing global consumerism and population has led to an increase in the levels of waste produced. Waste to energy (WTE) conversion technologies can be employed to convert residual wastes into clean energy, rather than sending these wastes directly to landfill. Waste to energy conversion technology explores the systems, technology and impacts of waste to energy conversion.Part one provides an introduction to WTE conversion and reviews the waste hierarchy and WTE systems options along with the corresponding environmental, regulatory and techno-economic issues facing this technology. Part two goes on to explore further specific aspects of WTE systems, engineering and technology and includes chapters on municipal solid waste (MSW) combustion plants and WTE systems for district heating. Finally, part three highlights pollution control systems for waste to energy technologies.Waste to energy conversion technology is a standard reference book for plant managers, building engineers and consultants requiring an understanding of WTE technologies, and researchers, scientists and academics interested in the field. - Reviews the waste hierarchy and waste to energy systems options along with the environmental and social impact of WTE conversion plants - Explores the engineering and technology behind WTE systems including considerations of municipal solid waste (MSW) its treatment, combustion and gasification - Considers pollution control systems for WTE technologies including the transformation of wast combustion facilities from major polluters to pollution sinks

Download or read book Future Directions of Municipal Solid Waste Management in Africa written by Mohee, Romeela and published by Africa Institute of South Africa. This book was released on 2015-04-03 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transformation and rapid population growth in Africa indicates that urbanisation is one of the key determinants of the future of social dynamics and development of the continent. Linked to these changes are increased production levels of Municipal Solid Waste. This book provides recommendations and solutions that derive from current situations, experiences and observations in Africa. The study is an essential tool for urban planners, environmental engineering students and lecturers, environmental consultants and policy-makers; it is also a resource for municipal authorities, as it outlines future directions of Municipal Solid Waste management. These need to be considered by the municipal authorities of most African countries.

Download or read book Energy Recovery from Municipal Solid Waste by Thermal Conversion Technologies written by P. Jayarama Reddy and published by CRC Press. This book was released on 2016-03-30 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an overview of municipal solid waste recycling, and how it can be used to generate clean power, transport fuels that can substitute fossil fuels, and value-based chemicals with minimal environmental impact. It also explains how hazardous wastes and sewage sludge can be treated and disposed of without affecting human and environmental health. A full discussion of established thermal conversion technologies that generate heat, electricity, liquid fuels and useful chemicals from solid waste and supporting case studies describing global waste-to-energy plants in operation make this work highly suited to an introductory course on waste thermal conversion processes.

Download or read book Waste Incineration and Public Health written by National Research Council and published by National Academies Press. This book was released on 2000-10-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incineration has been used widely for waste disposal, including household, hazardous, and medical wasteâ€"but there is increasing public concern over the benefits of combusting the waste versus the health risk from pollutants emitted during combustion. Waste Incineration and Public Health informs the emerging debate with the most up-to-date information available on incineration, pollution, and human healthâ€"along with expert conclusions and recommendations for further research and improvement of such areas as risk communication. The committee provides details on: Processes involved in incineration and how contaminants are released. Environmental dynamics of contaminants and routes of human exposure. Tools and approaches for assessing possible human health effects. Scientific concerns pertinent to future regulatory actions. The book also examines some of the social, psychological, and economic factors that affect the communities where incineration takes place and addresses the problem of uncertainty and variation in predicting the health effects of incineration processes.

Download or read book Waste to Energy Technologies and Global Applications written by Efstratios N. Kalogirou and published by CRC Press. This book was released on 2017-08-15 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through Waste-to-Energy (WtE) technology, plants use waste as a renewable fuel to co-produce electricity, heating, and cooling for urban utilization. This professional book presents the latest developments in WtE technologies and their global applications. The first part of the book covers thermal treatment technologies, including combustion, novel gasification, plasma gasification, and pyrolysis. It then examines 35 real-world WtE case studies from around the world, analyzing technical information behind planning, execution, goals, and national strategies. Results through the years show the benefits of the technology through the life cycle of the products. The book also examines financial and environmental aspects.

Download or read book What a Waste 2 0 written by Silpa Kaza and published by World Bank Publications. This book was released on 2018-12-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid waste management affects every person in the world. By 2050, the world is expected to increase waste generation by 70 percent, from 2.01 billion tonnes of waste in 2016 to 3.40 billion tonnes of waste annually. Individuals and governments make decisions about consumption and waste management that affect the daily health, productivity, and cleanliness of communities. Poorly managed waste is contaminating the world’s oceans, clogging drains and causing flooding, transmitting diseases, increasing respiratory problems, harming animals that consume waste unknowingly, and affecting economic development. Unmanaged and improperly managed waste from decades of economic growth requires urgent action at all levels of society. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 aggregates extensive solid aste data at the national and urban levels. It estimates and projects waste generation to 2030 and 2050. Beyond the core data metrics from waste generation to disposal, the report provides information on waste management costs, revenues, and tariffs; special wastes; regulations; public communication; administrative and operational models; and the informal sector. Solid waste management accounts for approximately 20 percent of municipal budgets in low-income countries and 10 percent of municipal budgets in middle-income countries, on average. Waste management is often under the jurisdiction of local authorities facing competing priorities and limited resources and capacities in planning, contract management, and operational monitoring. These factors make sustainable waste management a complicated proposition; most low- and middle-income countries, and their respective cities, are struggling to address these challenges. Waste management data are critical to creating policy and planning for local contexts. Understanding how much waste is generated—especially with rapid urbanization and population growth—as well as the types of waste generated helps local governments to select appropriate management methods and plan for future demand. It allows governments to design a system with a suitable number of vehicles, establish efficient routes, set targets for diversion of waste, track progress, and adapt as consumption patterns change. With accurate data, governments can realistically allocate resources, assess relevant technologies, and consider strategic partners for service provision, such as the private sector or nongovernmental organizations. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 provides the most up-to-date information available to empower citizens and governments around the world to effectively address the pressing global crisis of waste. Additional information is available at http://www.worldbank.org/what-a-waste.

Download or read book Solid and Hazardous Waste Management written by M.N. Rao and published by Butterworth-Heinemann. This book was released on 2016-10-27 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid and Hazardous Waste Management: Science and Engineering presents the latest on the rapid increase in volume and types of solid and hazardous wastes that have resulted from economic growth, urbanization, and industrialization and how they have challenged national and local governments to ensure effective and sustainable management of these waste products. The book offers universal coverage of the technologies used for the management and disposal of waste products, such as plastic waste, bio-medical wastes, hazardous wastes, and e-wastes. - Covers both traditional and new technologies for Identifying and categorizing the source and nature of the waste - Provides methods for the safe disposal of municipal solid wastes, plastic waste, bio-medical wastes, hazardous wastes, and e-wastes - Presents technologies that can be used for transportation and processing (including resource recovery) of the waste - Discusses reclamation, reuse, and recovery of energy from MSW

Download or read book Drawdown written by Paul Hawken and published by Penguin. This book was released on 2017-04-18 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: • New York Times bestseller • The 100 most substantive solutions to reverse global warming, based on meticulous research by leading scientists and policymakers around the world “At this point in time, the Drawdown book is exactly what is needed; a credible, conservative solution-by-solution narrative that we can do it. Reading it is an effective inoculation against the widespread perception of doom that humanity cannot and will not solve the climate crisis. Reported by-effects include increased determination and a sense of grounded hope.” —Per Espen Stoknes, Author, What We Think About When We Try Not To Think About Global Warming “There’s been no real way for ordinary people to get an understanding of what they can do and what impact it can have. There remains no single, comprehensive, reliable compendium of carbon-reduction solutions across sectors. At least until now. . . . The public is hungry for this kind of practical wisdom.” —David Roberts, Vox “This is the ideal environmental sciences textbook—only it is too interesting and inspiring to be called a textbook.” —Peter Kareiva, Director of the Institute of the Environment and Sustainability, UCLA In the face of widespread fear and apathy, an international coalition of researchers, professionals, and scientists have come together to offer a set of realistic and bold solutions to climate change. One hundred techniques and practices are described here—some are well known; some you may have never heard of. They range from clean energy to educating girls in lower-income countries to land use practices that pull carbon out of the air. The solutions exist, are economically viable, and communities throughout the world are currently enacting them with skill and determination. If deployed collectively on a global scale over the next thirty years, they represent a credible path forward, not just to slow the earth’s warming but to reach drawdown, that point in time when greenhouse gases in the atmosphere peak and begin to decline. These measures promise cascading benefits to human health, security, prosperity, and well-being—giving us every reason to see this planetary crisis as an opportunity to create a just and livable world.

Download or read book Process Integration and Intensification written by Jirí Jaromír Klemeš and published by Walter de Gruyter GmbH & Co KG. This book was released on 2014-05-26 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The authors have provided all the elements required for complete understanding of the basic concepts in heat recovery and water minimization in chemical and related processes, and followed these with carefully selected and developed problems and solutions in order to ensure that the concepts delivered can be applied." Simon Perry, The University of Manchester. This graduate textbook covers fundamentals of the key areas of Process Integration and Intensification for intra-process heat recovery (Heat Integration), inter-process heat recovery and cogeneration (Total Site) as well as water conservation. Step by step working sessions are illustrated for deeper understanding of the taught materials. The textbook also provides a wealth of pointers as well as further information for readers to acquire more extensive materials on the diverse industrial applications and the latest development trends in Process Integration and Intensification. It is addressed to graduate students as well as professionals to help the effectively application of Process Integration and Intensification in plant design and operation.

Download or read book Waste Biorefinery written by Thallada Bhaskar and published by Elsevier. This book was released on 2018-04-13 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Biorefinery: Potential and Perspectives offers data-based information on the most cutting-edge processes for the utilisation of biogenic waste to produce biofuels, energy products, and biochemicals – a critical aspect of biorefinery. The book explores recent developments in biochemical and thermo-chemical methods of conversion and the potential generated by different kinds of biomass in more decentralized biorefineries. Additionally, the book discusses the move from 200 years of raw fossil materials to renewable resources and how this shift is accompanied by fundamental changes in industrial manufacturing technologies (from chemistry to biochemistry) and in logistics and manufacturing concepts (from petrochemical refineries to biorefineries). Waste Biorefinery: Potential and Perspectives designs concepts that enable modern biorefineries to utilize all types of biogenic wastes, and to integrate processes that convert byproduct streams to high-value products, achieving higher cost benefits. This book is an essential resource for researchers and students studying biomass, biorefineries, and biofuels/products/processes, as well as chemists, biochemical/chemical engineers, microbiologists, and biotechnologists working in industries and government agencies. - Details the most advanced and innovative methods for biomass conversion - Covers biochemical and thermo-chemical processes as well as product development - Discusses the integration of technologies to produce bio-fuels, energy products, and biochemicals - Illustrates specific applications in numerous case studies for reference and teaching purposes

Download or read book Current Developments in Biotechnology and Bioengineering written by Sunil Kumar and published by Elsevier. This book was released on 2019-01-03 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Developments in Biotechnology and Bioengineering: Waste Treatment Processes for Energy Generation provides extensive research on the role of waste management processes/technologies for energy generation. The enormous increase of waste materials generated by human activity and its potentially harmful effects on the environment and public health have led to an increasing awareness of an urgent need to adopt scientific methods for the safe disposal of wastes. This book outlines the basic knowledge, processes and technologies for the generation of energy from waste and functions as an important reference for academics and practitioners at varying levels of interest and knowledge. The book's content encompasses all issues for energy recovery from waste in a very clear and simple manner, acting as a comprehensive resource for anyone seeking an understanding on the topic. - Outlines the latest technologies used for waste conversion into energy and facilitates project evaluation based on these technologies - Summarizes the pros and cons of various processes - Includes case studies and economic analysis

Download or read book Solid Waste as a Renewable Resource written by Jimmy Alexander Faria Albanese and published by CRC Press. This book was released on 2015-07-24 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title includes a number of Open Access chapters. The twenty-first century world faces several enormous challenges: how to mitigate climate change, meet a growing energy demand without relying on fossil fuels, and manage the escalating quantities of solid waste generated by cities around the world. This compendium volume offers a viable solutio

Download or read book Energy from Waste written by Paul Breeze and published by Academic Press. This book was released on 2017-10-27 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy from Waste is a concise, up-to-date and accessible guide on how to create power from both urban and industrial waste. The book explores the types of waste that, instead of going to landfill, can be converted to energy, also discussing the most up-to-date technologies for doing so. The book contains a strong emphasis on the related environmental impacts and economic factors involved in the various methods of generating electricity, making this a valuable and insightful read for those involved in the management and conversion of waste, including energy engineers, managers and technicians. - Explores both urban and industrial waste, its composition and how it is collected, enabling readers to better understand which power generation technologies can be used to convert it into power - Discusses the most up-to-date technologies, along with the impacts they have on the environment, including solid residue, chemicals and dust from the flue-gas treatment (and the flue gas itself) - Evaluates the economic impact of converting energy from waste and implementing and managing waste plants