Download or read book Unsettled Technology Domains in Aerospace Additive Manufacturing Concerning Safety Airworthiness and Certification written by Jody Muelaner and published by SAE International. This book was released on 2019-12-23 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is currently being used to produce many certified aerospace components. However, significant advantages of AM are not exploited due to unresolved issues associated with process control, feedstock materials, surface finish, inspection, and cost. Components subject to fatigue must undergo surface finish improvements to enable inspection. This adds cost and limits the use of topology optimization. Continued development of process models is also required to enable optimization and understand the potential for defects in thin-walled and slender sections. Costs are high for powder-fed processes due to material costs, machine costs, and low deposition rates. Costs for wire-fed processes are high due to the extensive postprocess machining required. In addition, these processes are limited to low-complexity features. Incremental improvements in all of these areas are being made, but a step change could potentially be achieved by hybrid processes, which use wire feedstock to deposit the bulk of the part and powder for fine detail. NOTE: SAE EDGE™ Research Reports are intended to identify and illuminate key issues in emerging, but still unsettled, technologies of interest to the mobility industry. The goal of SAE EDGE™ Research Reports is to stimulate discussion and work in the hope of promoting and speeding resolution of identified issues. SAE EDGE™ Research Reports are not intended to resolve the issues they identify or close any topic to further scrutiny. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2019008
Download or read book Unsettled Technology Domains in Aerospace Additive Manufacturing Concerning Safety Airworthiness and Certification written by Jody Muelaner and published by . This book was released on 2019-12-23 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Commercial Aviation Safety Sixth Edition written by Stephen K. Cusick and published by McGraw Hill Professional. This book was released on 2017-05-12 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-To-Date Coverage of Every Aspect of Commercial Aviation Safety Completely revised edition to fully align with current U.S. and international regulations, this hands-on resource clearly explains the principles and practices of commercial aviation safety—from accident investigations to Safety Management Systems. Commercial Aviation Safety, Sixth Edition, delivers authoritative information on today's risk management on the ground and in the air. The book offers the latest procedures, flight technologies, and accident statistics. You will learn about new and evolving challenges, such as lasers, drones (unmanned aerial vehicles), cyberattacks, aircraft icing, and software bugs. Chapter outlines, review questions, and real-world incident examples are featured throughout. Coverage includes: • ICAO, FAA, EPA, TSA, and OSHA regulations • NTSB and ICAO accident investigation processes • Recording and reporting of safety data • U.S. and international aviation accident statistics • Accident causation models • The Human Factors Analysis and Classification System (HFACS) • Crew Resource Management (CRM) and Threat and Error Management (TEM) • Aviation Safety Reporting System (ASRS) and Flight Data Monitoring (FDM) • Aircraft and air traffic control technologies and safety systems • Airport safety, including runway incursions • Aviation security, including the threats of intentional harm and terrorism • International and U.S. Aviation Safety Management Systems
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1986 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aviation Safety and Pilot Control written by National Research Council and published by National Academies Press. This book was released on 1997-03-28 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adverse aircraft-pilot coupling (APC) events include a broad set of undesirable and sometimes hazardous phenomena that originate in anomalous interactions between pilots and aircraft. As civil and military aircraft technologies advance, interactions between pilots and aircraft are becoming more complex. Recent accidents and other incidents have been attributed to adverse APC in military aircraft. In addition, APC has been implicated in some civilian incidents. This book evaluates the current state of knowledge about adverse APC and processes that may be used to eliminate it from military and commercial aircraft. It was written for technical, government, and administrative decisionmakers and their technical and administrative support staffs; key technical managers in the aircraft manufacturing and operational industries; stability and control engineers; aircraft flight control system designers; research specialists in flight control, flying qualities, human factors; and technically knowledgeable lay readers.
Download or read book Glare written by Ad Vlot and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glare is the name given to a new material for aircraft structures developed at Delft University in the Netherlands. It consists of thin aluminium layers bonded together by adhesive containing embedded fibres and is very resistant to fatigue. This book gives the inside story of how the development of Glare took place. It took more than two decades from the first tests in Delft to the major breakthrough following the decision of Airbus to apply the material on the A380 super-jumbo. This success was achieved by a small group of people inspired by professor Boud Vogelesang, people who kept believing in the material and fought against all obstacles during the years. This book tells the story of the ups and downs and the final success of their efforts.
Download or read book Glossary of Terms Used in Terotechnology written by British Standards Institute Staff and published by . This book was released on 1993 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vocabulary, Terotechnology, Management, Maintenance, Quality control, Reliability
Download or read book Technology and the Air Force written by Jacob Neufeld and published by DIANE Publishing. This book was released on 2009-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium co-sponsored by the Air Force Historical Foundation and the Air Force History and Museums Program. The symposium covered relevant Air Force technologies ranging from the turbo-jet revolution of the 1930s to the stealth revolution of the 1990s. Illustrations.
Download or read book Lightning Protection of Aircraft written by Franklin Fisher and published by CreateSpace. This book was released on 2012-07-13 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to present under one cover the current state of knowledge concerning the potential lightning effects on aircraft and that means that are available to designers and operators to protect against these effects. The impetus for writing this book springs from two sources- the increased use of nonmetallic materials in the structure of aircraft and the constant trend toward using electronic equipment to handle flight-critical control and navigation function.
Download or read book NASA SP written by and published by . This book was released on 1991 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustical Materials written by Pranab Saha and published by SAE International. This book was released on 2021-08-11 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is acoustics? What is noise? How is sound measured? How can the vehicle noise be reduced using sound package treatments? Pranab Saha answers these and more in Acoustical Materials. Acoustics is the science of sound, including its generation, propagation, and effect. Although the propulsion sources of internal combustion engine (ICE) vehicles and electric motor-powered vehicles (EV) are different and therefore their propulsion noises are different, both types of vehicles have shared noise concerns: Tire and road noise Wind noise Vehicle noise and vibration issues have been there almost from the inception of vehicle manufacturing. The noise problem in a vehicle is very severe and is difficult to solve only by modifying the sources of noise and vibration. Sound package treatments address the noise and vibration issues along the path to reduce in-cabin noise. In Acoustical Materials, readers will grasp the science of reducing sound and vibration using sound absorbers, sound barriers, and vibration dampers. Sound provides information on the proper operation of the vehicle, but if unchecked, can detract from the consumer experience within the vehicle and create noise pollution outside the vehicle. Acoustical Materials provides essential information on the basics of sound, vehicle noise source, how these are measured, how vehicle owners perceive sound, and ultimately, how to solve noise problems in vehicles using sound package materials.
Download or read book Mayo Clinic Preventive Medicine and Public Health Board Review written by Prathibha Varkey, MD, MPH, MHPE and published by Oxford University Press. This book was released on 2010-06-23 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Launched on Oxford Medicine Online in 2012, with the full-text of eight Mayo Clinic Scientific Press (MCSP) print titles and a bank of multiple-choice questions, Mayo Clinic Toolkit provides a single location for resident, fellow, and practicing clinicians to undertake the self-testing necessary to prepare for, and pass, the Boards. Mayo Clinic Preventive Medicine and Public Health Board Review is a concise review of preventive medicine and public health topics that is relevant to any preventive medicine, occupational medicine, internal medicine, or aerospace medicine physician or trainee. It is an ideal revision tool for preventive medicine board examinations, for candidates taking them for the first time and those taking them for recertification. Highlights of The Mayo Clinic Toolkit include: - Each title is presented in an enhanced format, allowing the enlargement and download of all figures and images, and linking to external sources referenced in the text. - The multiple-choice questions are designed to mirror those in the Board exam for realistic preparation; they also link back to the relevant title, and allow the user to measure their development through the recording of practice-exam success. - It can be accessed on a range of internet enabled devices, giving residents, fellows, and practicing clinicians the choice to study in locations which suit them - Subscription lengths range from 1-month to a full year. Combining two complimentary resource types into a single location, with enhancements to the print works, the flexibility to choose where and when to study, and the ability to monitor revision progress, Mayo Clinic Toolkit is truly the go-to site for Board preparation.
Download or read book Aviation Systems written by Andreas Wittmer and published by Springer Science & Business Media. This book was released on 2011-08-17 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide comprehensive coverage of the field of air transportation, giving attention to all major aspects, such as aviation regulation, economics, management and strategy. The book approaches aviation as an interrelated economic system and in so doing presents the “big picture” of aviation in the market economy. It explains the linkages between domains such as politics, society, technology, economy, ecology, regulation and how these influence each other. Examples of airports and airlines, and case studies in each chapter support the application-oriented approach. Students and researchers in business administration with a focus on the aviation industry, as well as professionals in the industry looking to refresh or broaden their knowledge of the field will benefit from this book.
Download or read book Managing Maintenance Error written by James Reason and published by CRC Press. This book was released on 2017-03-02 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Situations and systems are easier to change than the human condition - particularly when people are well-trained and well-motivated, as they usually are in maintenance organisations. This is a down-to-earth practitioner’s guide to managing maintenance error, written in Dr. Reason’s highly readable style. It deals with human risks generally and the special human performance problems arising in maintenance, as well as providing an engineer’s guide for their understanding and the solution. After reviewing the types of error and violation and the conditions that provoke them, the author sets out the broader picture, illustrated by examples of three system failures. Central to the book is a comprehensive review of error management, followed by chapters on:- managing person, the task and the team; - the workplace and the organization; - creating a safe culture; It is then rounded off and brought together, in such a way as to be readily applicable for those who can make it work, to achieve a greater and more consistent level of safety in maintenance activities. The readership will include maintenance engineering staff and safety officers and all those in responsible roles in critical and systems-reliant environments, including transportation, nuclear and conventional power, extractive and other chemical processing and manufacturing industries and medicine.
Download or read book Practical Aviation and Aerospace Law written by J. Scott Hamilton and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issued in earlier editions under the title Practical aviation law.
Download or read book On Subscale Flight Testing written by Alejandro Sobron and published by Linköping University Electronic Press. This book was released on 2018-11-05 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Downscaled physical models, also referred to as subscale models, have played an essential role in the investigation of the complex physics of flight until the recent disruption of numerical simulation. Despite the fact that improvements in computational methods are slowly pushing experimental techniques towards a secondary role as verification or calibration tools, real-world testing of physical prototypes still provides an unmatched confidence. Physical models are very effective at revealing issues that are sometimes not correctly identified in the virtual domain, and hence can be a valuable complement to other design tools. But traditional wind-tunnel testing cannot always meet all of the requirements of modern aeronautical research and development. It is nowadays too expensive to use these scarce facilities to explore different design iterations during the initial stages of aircraft development, or to experiment with new and immature technologies. Testing of free-flight subscale models, referred to as Subscale Flight Testing (SFT), could offer an affordable and low-risk alternative for complementing conventional techniques with both qualitative and quantitative information. The miniaturisation of mechatronic systems, the advances in rapid-prototyping techniques and power storage, as well as new manufacturing methods, currently enable the development of sophisticated test objects at scales that were impractical some decades ago. Moreover, the recent boom in the commercial drone industry has driven a quick development of specialised electronics and sensors, which offer nowadays surprising capabilities at competitive prices. These recent technological disruptions have significantly altered the cost-benefit function of SFT and it is necessary to re-evaluate its potential in the contemporary aircraft development context. This thesis aims to increase the comprehension and knowledge of the SFT method in order to define a practical framework for its use in aircraft design; focusing on low-cost, short-time solutions that don’t require more than a small organization and few resources. This objective is approached from a theoretical point of view by means of an analysis of the physical and practical limitations of the scaling laws; and from an empirical point of view by means of field experiments aimed at identifying practical needs for equipment, methods, and tools. A low-cost data acquisition system is developed and tested; a novel method for semi-automated flight testing in small airspaces is proposed; a set of tools for analysis and visualisation of flight data is presented; and it is also demonstrated that it is possible to explore and demonstrate new technology using SFT with a very limited amount of economic and human resources. All these, together with a theoretical review and contextualisation, contribute to increasing the comprehension and knowledge of the SFT method in general, and its potential applications in aircraft conceptual design in particular.
Download or read book Human centered Aircraft Automation A Concept and Guidelines written by Charles E. Billings and published by . This book was released on 1991 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
