Download or read book Unsettled Issues in Advanced Air Mobility Certification written by Bob McQueen and published by SAE International. This book was released on 2021-06-18 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced air mobility (AAM) refers to urban transportation systems that move people and goods by air. This has significant implications for reducing traffic congestion in cities and for providing an integrated approach to urban mobility. With the emergence of drone technology and the possibility of more autonomous aircraft, interest has grown considerably in AAM. Unsettled Issues in Advanced Air Mobility Certification discusses the impact of AAM on private sector solution providers including aerospace and technology companies and goes into solutions for urban planners and transportation professionals for better integration across all AAM modes. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2021014

Download or read book Unsettled Issues Concerning Urban Air Mobility Infrastructure written by Bob McQueen and published by SAE International. This book was released on 2021-11-15 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urban air mobility (UAM) refers to urban transportation systems that move people by air. UAM offers the potential for reducing traffic congestion in cities and providing an integrated approach to urban mobility. With the emergence of electric vertical takeoff and landing (eVTOL) aircraft, drone technology, and the possibility of automated aircraft, interest in this topic has grown considerably for private sector solution providers—including aerospace and technology companies—as well as urban planners and transportation professionals. Unsettled Issues Concerning Urban Air Mobility Infrastructure discusses the infrastructure requirements to effectively integrate UAM services into the overarching urban transportation system to enable multimodal trips and complete origin to destination travel. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2021025

Download or read book Unsettled Issues Concerning eVTOL for Rapid response On demand Firefighting written by Johnny Doo and published by SAE International. This book was released on 2021-08-26 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advancements of electric vertical takeoff and landing (eVTOL) aircraft have generated significant interest within and beyond the traditional aviation industry. One promising application for these innovative systems is in firefighting support during urban, rural, and wildland firefighting operations. Future eVTOL firefighting capabilities could include early detection and suppression, civilian rescue, and on-demand aerial deployment and extraction of firefighters. Unsettled Issues Concerning eVTOL for Rapid-response, On-demand Firefighting identifies the challenges to be addressed so that these capabilities and benefits could be realized at scale: Firefighting-specific eVTOL vehicle development Sense and avoid capabilities in smoke-inhibited environments Autonomous and remote operating capabilities Charging system compatibility and availability Operator and controller training Dynamic air space management Vehicle/fleet logistics and support First-responder and general public acceptance Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2021017

Download or read book Pitfalls of Designing Developing and Maintaining Modular Avionics Systems in the Name of Sustainability written by Tammy Reeve and published by SAE International. This book was released on 2024-05-07 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability is both an ethical responsibility and business concern for the aerospace industry. Military and commercial avionics developers have pushed toward a common standard for interfaces, computing platforms, and software in hopes of having “reusability” and reducing weight with backplane computing architectures which, in theory, would support commonality across aircraft systems. The integrated modular avionics (IMA) and military Future Airborne Capability Environment (FACE) standards are two such examples. They emerged to support common computing architectures for reuse and sustainability concepts, from the beginning of aircraft development to the sundown or mortality phase. Pitfalls of Designing, Developing, and Maintaining Modular Avionics Systems in the Name of Sustainability looks at technological, organizational, and cultural challenges making reuse and IMA platform models difficult to fully realize their sustainability goals. Additionally, it considers the certification aspects of reuse and examines lessons learned from a successful reusable and sustainable platform. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2024010

Download or read book Unsettled Issues Concerning the Opportunities and Challenges of eVTOL Applications during a Global Pandemic written by Johnny Doo and published by SAE International. This book was released on 2020-10-30 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advancements of electric vertical takeoff and landing (eVTOL) aircraft have generated significant interest within and beyond the traditional aviation industry, and many new and novel applications have been identified and under development. The COVID-19 crisis has highlighted the challenges of managing a global pandemic response due to the difference in regional and local resources, culture, and political systems. Although there may not be a uniform crisis management strategy that the world can agree on, we can leverage a new generation of vertical flight vehicles to make a difference if (or when) such a global epidemic strikes again. One of the key challenges realized in the early stage of the COVID-19 outbreak is the ability to allocate and distribute limited and critical medical resources, including equipment, supplies, medical personnel, and first responders to the hot spots when and where they may be needed. The on-demand logistics capabilities could be enhanced by the availability of new-generation eVTOL aircraft and their forthcoming autonomous operation. The ability to land and takeoff at many unconventional locations makes eVTOL aircraft valuable assists for complementing and enhancing on-demand logistic needs. To make such operations truly productive is not easy; there are reassociated challenges that needed to be addressed to enable the benefit of such a system. In addition to having a large enough eVTOL fleet near a location that can be available for the pandemic responses, the support system and the ability to deploy and reposition the fleet dynamically with supporting infrastructures are also required. Based on the rapid development progress of eVTOL, it is envisioned that those challenges can be addressed soon. https://doi.org/10.4271/EPR2020022

Download or read book Unsettled Issues Regarding the Use of eVTOL Aircraft during Natural Disasters written by Johnny Doo and published by SAE International. This book was released on 2022-01-27 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advancements of electric vertical takeoff and landing (eVTOL) aircraft have generated significant interest within and beyond the traditional aviation industry, and many new and novel applications have been identified and are under development. One promising application is rapid response during natural disasters, which can complement current capabilities to help save lives and enhance post-disaster recoveries. The Use of eVTOL Aircraft During Natural Disasters presents issues that need to be addressed before eVTOL aircraft are integrated into natural disaster response operations: eVTOL vehicle development Detect-and-avoid capabilities in complex and challenging operating environments Autonomous and remote operations Charging system compatibility and availability Operator and controller training Dynamic air space management Vehicle/fleet logistics and support Acceptance from stakeholders and the public Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2022001

Download or read book Unsettled Topics in the General Aviation Autonomy Landscape written by Anna Mracek Dietrich and published by SAE International. This book was released on 2022-02-24 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extent of automation and autonomy used in general aviation (GA) has been accelerating dramatically. This has huge potential benefits for safety given that 75% of accidents in personal and on-demand GA are due to pilot error. However, an approach to certifying autonomous systems that relies on reversionary modes limits their potential to improve safety. Placing a human pilot in a situation where they are suddenly tasked with flying an airplane in a failed situation, often without sufficient situational awareness, is overly demanding. This, coupled with advancing technology that may not align with a deterministic certification paradigm, creates an opportunity for new approaches to certifying autonomous and highly automated aircraft systems. Unsettled Topics in the General Aviation Autonomy Landscape discusses how these new approaches must account for the multifaceted aviation approach to risk management which has interlocking requirements for airworthiness and operations (including training and airspace integration). If implemented properly, autonomy can take GA safety to the next level while simultaneously increasing the number and variety of aircraft and transportation options they provide. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2022004

Download or read book Unsettled Topics Concerning Flying Cars for Urban Air Mobility written by Yangjun Zhang and published by SAE International. This book was released on 2021-05-24 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flying cars—as a new type of vehicle for urban air mobility (UAM)—have become an important development trend for the transborder integration of automotive and aeronautical technologies and industries. This article introduces the 100-year history of flying cars, examines the current research status for UAM air buses and air taxis, and discusses the future development trend of intelligent transportation and air-to-land amphibious vehicles. Unsettled Topics Concerning Flying Cars for Urban Air Mobility identifies the major bottlenecks and impediments confronting the development of flying cars, such as high power density electric propulsion, high lift-to-drag ratio and lightweight body structures, and low-altitude intelligent flight. Furthermore, it proposes three phased goals and visions for the development of flying cars in China, suggesting the development of a flying vehicle technology innovation system that integrates automotive and aeronautic industries. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2021011

Download or read book Unsettled Issues in Additive Manufacturing and Improved Sustainability in the Mobility Industry written by Kevin Slattery and published by SAE International. This book was released on 2021-07-30 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM), also known as “3D printing,” is often touted as a sustainable technology, especially for metal components, since it produces either net or near-net shapes versus traditionally machined pieces from larger mill products. While traditional machining from mill products is often the case in aerospace, most of the metal parts used in the world are made from flat-rolled metal and are quite efficient in utilization. Additionally, some aspects of the AM value chain are often not accounted for when determining sustainability. Unsettled Issues in Additive Manufacturing and Improved Sustainability in the Mobility Industry uses a set of scenarios to compare the sustainability of parts made using additive and conventional technologies for both the present and future (2040) states of manufacturing. Click here to access The Mobility Frontier: Metals, Polymers, or Composites Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2021015

Download or read book Unsettled Domains Concerning Electric Propulsion Technology for Commercial Aircraft written by Ravi Rajamani and published by SAE International. This book was released on 2019-12-30 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: According to some, electric propulsion is already on its way down the “trough of disillusionment.” This report argues that while there are some concerns with associated technologies, such pessimism is unwarranted. Yes, battery systems can be more energy dense; charging standards are late in being developed; it is not clear what technologies and architectures will win out for which sectors; we still have to figure out how to deal with thermal management issues at all levels in future designs; and what might be the certification standards for electric aircraft. But that does not mean that these issues will not be addressed. Yes, these unsettled questions may take a little longer to solve than originally estimated, but there is full expectation within the industry that electric propulsion for commercial aircraft will succeed. In this SAE EDGE Research Report we present points of view from leading researchers in the industry who are thinking deeply about solving these problems. NOTE: SAE EDGE™ Research Reports are intended to identify and illuminate key issues in emerging, but still unsettled, technologies of interest to the mobility industry. The goal of SAE EDGE™ Research Reports is to stimulate discussion and work in the hope of promoting and speeding resolution of identified issues. SAE EDGE™ Research Reports are not intended to resolve the issues they identify or close any topic to further scrutiny. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2019006

Download or read book The Use of eVTOL Aircraft for First Responder Police and Medical Transport Applications written by Johnny Doo and published by SAE International. This book was released on 2023-09-26 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancements in electric vertical takeoff and landing (eVTOL) aircraft have generated significant interest within and beyond the traditional aviation industry. One particularly promising application involves on-demand, rapid-response use cases to broaden first responders, police, and medical transport mission capabilities. With the dynamic and varying public service operations, eVTOL aircraft can offer potentially cost-effective aerial mobility components to the overall solution, including significant lifesaving benefits. The Use of eVTOL Aircraft for First Responder, Police, and Medical Transport Applications discusses the challenges need to be addressed before identified capabilities and benefits can be realized at scale: Mission-specific eVTOL vehicle development Operator- and patient-specific accommodations Detect-and-avoid capabilities in complex and challenging operating environments Autonomous and artificial intelligence-enhanced mission capabilities Home-base charging systems for battery power platforms Simplified operator and support training Vehicle/fleet maintenance and support Acceptance and participation from stakeholder services, local and state-level leadership, field operators, and support team members Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2023020

Download or read book Unsettled Topics on Nondestructive Testing of Additively Manufactured Parts in the Mobility Industry written by Kevin Slattery and published by SAE International. This book was released on 2020-09-29 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) technology, also known as 3D printing, has transitioned from concepts and prototypes to part-for-part substitution and the creation of unique AM-specific part geometries. These applications are increasingly present in demanding, mission-critical fields such as medicine and aerospace, which require materials with certain thermal, stiffness, corrosion, and static loading properties. To advance in these arenas, metallic, ceramic, and polymer composite AM parts need to be free from discontinuities. The manufacturing processes have to be stable, robust, and repeatable. And the nondestructive testing (NDT) technology and inspection methods will need to be sufficiently capable and reliable to ensure that discontinuities will be detected to prevent the components from being accepted for use. As the second installment of a six-part series of SAE EDGE™ Research Reports on AM, this one discusses the need, challenges, technologies, and opportunities for NDT in AM. NOTE: SAE EDGE™ Research Reports are intended to identify and illuminate key issues in emerging, but still unsettled, technologies of interest to the mobility industry. The goal of SAE EDGE™ Research Reports is to stimulate discussion and work in the hope of promoting and speeding resolution of identified issues. SAE EDGE™ Research Reports are not intended to resolve the challenges they identify or close any topic to further scrutiny. Click here to access The Mobility Frontier: Metals, Polymers, or Composites Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2020017

Download or read book Unsettled Topics on the Benefit of Additive Manufacturing for Production at the Point of Use in the Mobility Industry written by Kevin Slattery and published by SAE International. This book was released on 2021-02-15 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: An oft-cited benefit of additive manufacturing (AM), or “3D-printing,” technology is the ability to produce parts at the point of use by downloading a digital file and making the part at a local printer. This has the potential to greatly compress supply chains, lead times, inventories, and design iterations for custom parts. As a result of this, both manufacturing and logistics companies are investigating and investing in AM capacity for production at the point of use. However, it can be imagined that the feasibility and benefits are a function of size, materials, build time, manufacturing complexity, cost, and competing technologies. Because of this, there are instances where the viability of point-of-use manufacturing ranges from the perfect solution to the worst possible choice. Unsettled Topics on the Benefits of Additive Manufacturing for Production at the Point of Use in the Mobility Industry discusses the benefits, challenges, trade-offs, and other determining factors regarding this new level of AM possibilities. Click here to access The Mobility Frontier: Metals, Polymers, or Composites Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2021006

Download or read book Unsettled Topics on the Feasibility and Desirability of Using Additive Manufacturing in the Mobility Industry written by Kevin Slattery and published by SAE International. This book was released on 2020-04-27 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Depending on the industry and application, views on additive manufacturing (AM), or “3D printing,” range from something that will transform an industry to it being another overhyped technology that will only find niche applications. Most views fall somewhere in between, with the most common one being that it depends on the application and technology. Because of the ability to directly produce parts from a digital file, views often include dependence on when and where the part is needed. This introduces the crux of the matter, which is how to determine when the use of AM is feasible and desirable, which is made all the more complicated by the fact that not only is AM technology in general changing quickly, but also the merits of the each AM technology relative to the others are also changing. Finally, non-AM technologies are continually improving and are increasingly adding AM-like capability. As the opening report of a six-part series of SAE EDGE™ Research Reports on AM, this paper discusses unsettled issues pertaining to the benefits, drawbacks, and trade-offs, as well as the decision-making processes to be followed in determining the feasibility and desirability of using AM. NOTE: SAE EDGE™ Research Reports are intended to identify and illuminate key issues in emerging, but still unsettled, technologies of interest to the mobility industry. The goal of SAE EDGE™ Research Reports is to stimulate discussion and work in the hope of promoting and speeding resolution of identified issues. SAE EDGE™ Research Reports are not intended to resolve the challenges they identify or close any topic to further scrutiny. Click here to access The Mobility Frontier: Metals, Polymers, or Composites Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2020009

Download or read book The Use of eVTOL Aircraft for Military Applications written by Johnny Doo and published by SAE International. This book was released on 2022-11-15 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advancements in eVTOL aircraft have generated significant interest within and beyond the traditional aviation industry. One promising application is for last-mile (and middle-mile) military transport and logistics, which can complement current mission capabilities and enhance operational readiness. With the dynamic and varying global challenges facing military operations, eVTOL aircraft can offer timely, on-demand, and potentially cost-effective aerial mobility components to the overall solution. The Use of eVTOL Aircraft for Military Applications: Last-mile Transport and Logistics explores the challenges that need to be addressed before identified capabilities and benefits can be realized at scale: Mission-specific eVTOL vehicle development Detect-and-avoid (DAA)capabilities in complex and challenging operating environments Autonomous and AI-enhanced mission capabilities Charging system compatibility and availability for battery-electric vehicles Simplified vehicle operations (SVO) training Vehicle/fleet logistics and support Secured supply chain management Acceptance from stakeholder services, military leadership, field commanders, and operating and support team members Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2022025

Download or read book Unsettled Topics Concerning Adopting Blockchain Technology in Aerospace written by Rhonda Walthall and published by SAE International. This book was released on 2020-10-30 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the aerospace industry, competition is high and the need to ensure safety and security while managing costs is paramount. Furthermore, stakeholders—who gain the most by working together—do not necessarily trust each other. Now, mix that with changing enterprise technologies, management of historical records, and customized legacy systems. This issue touches all aspects of the aerospace industry, from frequent flyer miles to aircraft maintenance and drives tremendous inefficiency and cost. Technology that augments, rather than replaces, is needed to transform these complex systems into efficient, digital processes. Blockchain technology offers collaborative opportunities for solving some of the data problems that have long challenged the industry. This SAE EDGE™ Research Report by Rhonda D. Walthall examines how blockchain technology could impact the aerospace industry and addresses some of the unsettled concerns surrounding its implementation. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2020021

Download or read book Unsettled Topics on Surface Finishing of Metallic Powder Bed Fusion Parts in the Mobility Industry written by Kevin Slattery and published by SAE International. This book was released on 2021-01-18 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser and electron-beam powder bed fusion (PBF) additive manufacturing (AM) technology has transitioned from prototypes and tooling to production components in demanding fields such as medicine and aerospace. Some of these components have geometries that can only be made using AM. Initial applications either take advantage of the relatively high surface roughness of metal PBF parts, or they are in fatigue, corrosion, or flow environments where surface roughness does not impose performance penalties. To move to the next levels of performance, the surfaces of laser and electron-beam PBF components will need to be smoother than the current as-printed surfaces. This will also have to be achieve on increasingly more complex geometries without significantly increasing the cost of the final component. Unsettled Topics on Surface Finishing of Metallic Powder Bed Fusion Parts in the Mobility Industry addresses the challenges and opportunities of this technology, and what remains to be agreed upon by the industry. Click here to access The Mobility Frontier: Metals, Polymers, or Composites Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2021001