Download or read book Unsaturated Polyester Resins written by Sabu Thomas and published by Elsevier. This book was released on 2019-07-11 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated Polyester Resins: Fundamentals, Design, Fabrication, and Applications explains the preparation, techniques and applications relating to the use of unsaturated polyester resin systems for blends, interpenetrating polymer networks (IPNs), gels, composites and nanocomposites, enabling readers to understand and utilize the improved material properties that UPRs facilitate. Chapters cover unsaturated polyester resins and their interaction at the macro, micro and nano levels, in-depth studies on the properties and analysis of UPR based materials, and the applications of UPR based composites, blends, IPNs and gels across a range of advanced commercial and industrial fields. This is a highly detailed source of information on unsaturated polyester resins, supporting academics, researchers and postgraduate students working with UPRs, polyesters, polymeric or composite materials, polymer chemistry, polymer physics, and materials science, as well as scientists, R&D professionals and engineers in industry. - Covers the use of unsaturated polyester resin systems for blends, IPNs, gels, composites and nanocomposites - Presents cutting-edge techniques for the analysis and improvement of properties of advanced UPR-based materials - Unlocks the potential of unsaturated polyester resins in high-performance materials for a range of advanced applications

Download or read book Handbook of Thermoset Plastics written by Andreas Kandelbauer and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated polyester resins (UPR) and vinyl ester resins (VER) are among the most commercially important thermosetting matrix materials for composites. Although comparatively low cost, their technological performance is suitable for a wide range of applications, such as fiber-reinforced plastics, artificial marble or onyx, polymer concrete, or gel coats. The main areas of UPR consumption include the wind energy, marine, pipe and tank, transportation, and construction industries. This chapter discusses basic UPR and VER chemistry and technology of manufacturing, and consequent applications. Some important properties and performance characteristics are discussed, such as shrinkage behavior, flame retardance, and property modification by nanoparticles. Also briefly introduced and described are the practical aspects of UPR and VER processing, with special emphasis on the most widely used technological approaches, such as hand and spray layup, resin infusion, resin transfer molding, sheet and bulk molding, pultrusion, winding, and centrifugal casting.

Download or read book Unsaturated Polyester Technology written by Paul F. Bruins and published by CRC Press. This book was released on 1976 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unsaturated Polyesters written by Herman V. Boenig and published by . This book was released on 1964 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Unsaturated Polyester Resins written by Sabu Thomas and published by Elsevier. This book was released on 2023-03-30 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Unsaturated Polyester Resins: Synthesis, Modifications, and Preparation Methods takes a practical approach to unsaturated polyester-based materials and their preparation for implementation in a range of innovative areas. Sections introduce the background of polyester and the fundamentals of unsaturated polyester resins (UPRs), including chemistry, additives, curing, and processing methods. Hydrolytic stability and structure-property relationships are also discussed in detail, along with coverage of modification strategies for UPR and the development of bio-composites incorporating natural fiber with unsaturated polyester. Subsequent chapters focus on the preparation of UPR for specific target applications, including in construction, marine and aerospace, adhesives and coatings, insulation systems, electrics, pipeline corrosion, military, biomedicine, and tissue engineering. Finally, the advantages and disadvantages of UPR compared to other resins, in terms of properties and performance, as well as life cycle assessment, are addressed and analyzed. - Presents processing methods, morphology, structure-property relationship, and modification strategies for unsaturated polyester - Explores sustainability in terms of lifecycle assessment of unsaturated polyester and bio-composites incorporating unsaturated polyester - Guides the reader to advanced applications across construction, marine and aerospace, adhesives and coatings, electrics and many more areas

Download or read book Modern Polyesters written by John Scheirs and published by John Wiley & Sons. This book was released on 2005-09-01 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an overview of the family of polyester polymers which comprise an important group of plastics that span the range of commodity polymers to engineering resins. It describes the preparation, properties and applications of polyesters. Readers will also find details on polyester-based elastomers, biodegradable aliphatic polyester, liquid crystal polyesters and unsaturated polyesters for glass-reinforced composites. Presents an overview of the most recent developments. Explores synthesis, catalysts, processes, properties and applications. Looks at emerging polyester materials as well as existing ones. Written by foremost experts from both academia and industry, ensuring that both fundamentals and practical applications are covered.

Download or read book Polyesters Unsaturated polyesters and polyester plasticisers by B Parkyn F Lamb and B V Clifton written by I. Goodman and published by . This book was released on 1965 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polyester written by Nurhan Onar Camlibel and published by BoD – Books on Demand. This book was released on 2018-03-14 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyester is one of the most important polymers for fibers and composites. Significant developments in nanoparticle-doped polyester composites, polyester recycling, flame-retardant unsaturated polyester resins, and application of polyester for construction and automotive industry are currently carried out. Thus, this book provides leading edge research on improvements of functional properties of polyester, modifications of unsaturated polyester resins, and polyester (especially recycled polyester) usage in construction and in automotive application areas in the form of fiber, resin, and composite. The book also covers the characterization of unique features of polyester found by mechanical, chemical, physical, microstructural, and thermal analyses. This book intends to provide an understanding of the developments of functional polyester production, synthesis, and characterization and support to many academic researchers and graduate students in textile, polymer, composite, chemical science, and research and development managers in recycling and composite applications of polyester in the construction and automotive industry.

Download or read book FRP Technology written by R. Weatherhead and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic resins have become increasingly important over the years, finding wide application in a variety of fields. Not least have been the tremendous strides made in the use of fibre reinforced resin systems. Although by far the bulk of all fibre reinforced products are made from unsaturated polyester r~sins reinforced with glass fibres, other resins and other fibres are playing an increasingly important role. It is with this in mind that the present book has been written. An attempt has been made to combine within one book information on the various resin systems and reinforcing fibres in use today, together with some properties and processing details. Since most of the resins available are formulated products rather than pure chemical compounds, some information has been included on commercially available materials. For convenience, where commercial data have been included, these have been located at the end of the appropriate chapter or, where only limited data are presented, at the end of the appropriate section. Such data have been included for the benefit of designers and fabricators, to indicate the wide choice of materials available and to enable them to select materials without having to approach a vast number of suppliers and then to sift through an even greater number of data sheets.

Download or read book Fundamentals of Composites Manufacturing Second Edition written by A. Brent Strong and published by Society of Manufacturing Engineers. This book was released on 2008 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes advances, key information, case studies, and examples that can broaden your knowledge of composites materials and manufacturing methods. This text deals with composites manufacturing methods, providing tips for getting the best results that weigh the required material properties against cost and production efficiency. An Instructor's Guide is also available.

Download or read book Handbook of Composites written by S.T. Peters and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, fiber reinforced composites are in use • properties of different component (fiber, in a variety of structures, ranging from space matrix, filler) materials; craft and aircraft to buildings and bridges. • manufacturing techniques; This wide use of composites has been facili • analysis and design; tated by the introduction of new materials, • testing; improvements in manufacturing processes • mechanically fastened and bonded joints; and developments of new analytical and test • repair; ing methods. Unfortunately, information on • damage tolerance; these topics is scattered in journal articles, in • environmental effects; conference and symposium proceedings, in and disposal; • health, safety, reuse, workshop notes, and in government and com • applications in: pany reports. This proliferation of the source - aircraft and spacecraft; material, coupled with the fact that some of - land transportation; the relevant publications are hard to find or - marine environments; are restricted, makes it difficult to identify and - biotechnology; obtain the up-to-date knowledge needed to - construction and infrastructure; utilize composites to their full advantage. - sporting goods. This book intends to overcome these diffi Each chapter, written by a recognized expert, culties by presenting, in a single volume, is self-contained, and contains many of the many of the recent advances in the field of 'state-of-the-art' techniques reqUired for prac composite materials. The main focus of this tical applications of composites.

Download or read book Chemistry and Technology of Thermosetting Polymers in Construction Applications written by M.H. Irfan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric products are used widely in the construction industry, because they offer a range of desirable performance properties not available from traditional materials. Development of these products continues in a number of major research and development programmes within the construction materials sector, aimed at improving the performance, durability and applicational properties of these materials. It seems certain that their use will increase as their overall performance is developed and as the industry becomes more familiar with the techniques required to apply these materials and the benefits they offer. The purpose of this book is to familiarise the reader with the range of thermosetting polymeric materials available for construction applications, and to provide sound information on the properties and applications of these important materials. Professional engineers involved in the specification, application and testing of these materials will find this book a compact, authoritative and comprehensive source of information on these materials. Chemists and technologists involved in developing new or improved formulations will find in this book much to inform their work, particularly in the important area of applicational properties.

Download or read book Reactive Polymers Fundamentals and Applications written by Johannes Karl Fink and published by William Andrew. This book was released on 2017-10-24 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactive Polymers: Fundamentals and Applications: A Concise Guide to Industrial Polymers, Third Edition introduces engineers and scientists to a range of reactive polymers and then details their applications and performance benefits. Basic principles and industrial processes are described for each class of reactive resin (thermoset), as well as additives, the curing process, applications and uses. The initial chapters are devoted to individual resin types (e.g., epoxides, cyanacrylates), followed by more general chapters on topics such as reactive extrusion and dental applications. Injection molding of reactive polymers, radiation curing, thermosetting elastomers, and reactive extrusion equipment are covered as well. The use of reactive polymers enables manufacturers to make chemical changes at a late stage in the production process, which, in turn, cause changes in performance and properties. Material selection and control of the reaction are essential to achieve optimal performance. Material new to this edition includes the most recent developments, applications and commercial products for each chemical class of thermosets, as well as sections on fabrication methods, reactive biopolymers, recycling of reactive polymers and case studies. - Covers the basics and most recent developments, including reactive biopolymers, recycling of reactive polymers, nanocomposites and fluorosilicones - Offers an indispensable guide for engineers and advanced students alike - Provides extensive literature and patent review - Reflects a thorough review of all literature published in this area since 2014 - Features revised and updated chapters to reflect the latest research in reactive polymers

Download or read book Polyester and Alkyd Resins written by Ulrich Poth and published by Vincentz Network GmbH & Co KG. This book was released on 2020-02-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyester and alkyd resins belong to the most diverse and important material classes of paint chemistry and their usage as binders has been established for a long time. This standard work goes into detail on the composition, structure and properties of these important binder groups and subjects previous findings in that field to a critical review. It shows different precise calculation approaches in modern coatings development, ways to formulate polyester and alkyd resins in experimental designs and how to vary them systematically. A practice- and future-oriented reference book that should not be missing in any laboratory!

Download or read book Effect of Ionizing Radiation on a Series of Saturated Polyesters written by Gaetano Frank D'Alelio and published by . This book was released on 1964 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Polymer Synthesis written by Hans R. Kricheldorf and published by CRC Press. This book was released on 1991-12-23 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: A relatively compact, but nonetheless comprehensive, review of the most important preparative methods for the synthesis and chemical modification of polymers. The contents are subdivided according to chemical structure of the polymer backbone. Complementary emphasis is on special properties and appl

Download or read book Reaction Polymers written by Wilson F. Gum and published by . This book was released on 1992-01-01 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: