Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1948 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flexible AC Transmission Systems Modelling and Control written by Xiao-Ping Zhang and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extended and revised second edition of this successful monograph presents advanced modeling, analysis and control techniques of Flexible AC Transmission Systems (FACTS). The book covers comprehensively a range of power-system control problems: from steady-state voltage and power flow control, to voltage and reactive power control, to voltage stability control, to small signal stability control using FACTS controllers. In the six years since the first edition of the book has been published research on the FACTS has continued to flourish while renewable energy has developed into a mature and booming global green business. The second edition reflects the new developments in converter configuration, smart grid technologies, super power grid developments worldwide, new approaches for FACTS control design, new controllers for distribution system control, and power electronic controllers in wind generation operation and control. The latest trends of VSC-HVDC with multilevel architecture have been included and four completely new chapters have been added devoted to Multi-Agent Systems for Coordinated Control of FACTS-devices, Power System Stability Control using FACTS with Multiple Operating Points, Control of a Looping Device in a Distribution System, and Power Electronic Control for Wind Generation.

Download or read book Computer Modelling of Electrical Power Systems written by Jos Arrillaga and published by . This book was released on 1983 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the use of power system component models and efficient computational techniques in the development of a new generation of programs representing the steady and dynamic states of electrical power systems. Presents main computational and transmission system developments. Derives steady state models of a.c. and d.c. power systems plant components, describes a general purpose phase a.c. load flow program emphasizing Newton Fast Decoupled Algorithm, and more. Considers all aspects of the power system in the dynamic state.

Download or read book Power System Modelling and Scripting written by Federico Milano and published by Springer Science & Business Media. This book was released on 2010-09-08 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power system modelling and scripting is a quite general and ambitious title. Of course, to embrace all existing aspects of power system modelling would lead to an encyclopedia and would be likely an impossible task. Thus, the book focuses on a subset of power system models based on the following assumptions: (i) devices are modelled as a set of nonlinear differential algebraic equations, (ii) all alternate-current devices are operating in three-phase balanced fundamental frequency, and (iii) the time frame of the dynamics of interest ranges from tenths to tens of seconds. These assumptions basically restrict the analysis to transient stability phenomena and generator controls. The modelling step is not self-sufficient. Mathematical models have to be translated into computer programming code in order to be analyzed, understood and “experienced”. It is an object of the book to provide a general framework for a power system analysis software tool and hints for filling up this framework with versatile programming code. This book is for all students and researchers that are looking for a quick reference on power system models or need some guidelines for starting the challenging adventure of writing their own code.

Download or read book Grid Converters for Photovoltaic and Wind Power Systems written by Remus Teodorescu and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters

Download or read book Thyristor Based FACTS Controllers for Electrical Transmission Systems written by R. Mohan Mathur and published by John Wiley & Sons. This book was released on 2002-02-27 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important new resource for the international utility market Over the past two decades, static reactive power compensators have evolved into a mature technology and become an integral part of modern electrical power systems. They are one of the key devices in flexible AC transmission systems (FACTS). Coordination of static compensators with other controllable FACTS devices promises not only tremendously enhanced power system controllability, but also the extension of power transfer capability of existing transmission corridors to near their thermal capacities, thus delaying or even curtailing the need to invest in new transmission facilities. Offering both an in-depth presentation of theoretical concepts and practical applications pertaining to these power compensators, Thyristor-Based FACTS Controllers for Electrical Transmission Systems fills the need for an appropriate text on this emerging technology. Replete with examples and case studies on control design and performance, the book provides an important resource for both students and engineers working in the field.

Download or read book FACTS Controllers written by K. R PADIYAR and published by . This book was released on 2020-10 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Key Features:Concepts are explained with illustrative examples and case studies. Applications of SVC, TCSC, GCSC, SPST, STATCOM, SSSC, UPFC, IPFC and IPC for voltage/power control in transmission systems. Application of DSTATCOM, DVR and UPQC for improving power quality in distribution systems. Design of Power Oscillation Damping (POD) controllers. Mitigation of SSR using series FACTS Controllers. About the Book:The emerging technology of Flexible AC Transmission System (FACTS) enables planning and operation of power systems at minimum cost, without compromising security. This is based on modern high power electronic systems that provide fast controllability to ensure 'flexible' operation under changing system conditions. This book presents a comprehensive treatment of the subject by discussing the operating principles, mathematical models, control design and issues that affect the applications.

Download or read book PowerFactory Applications for Power System Analysis written by Francisco M. Gonzalez-Longatt and published by Springer. This book was released on 2014-12-27 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive set of guidelines and applications of DIgSILENT PowerFactory, an advanced power system simulation software package, for different types of power systems studies. Written by specialists in the field, it combines expertise and years of experience in the use of DIgSILENT PowerFactory with a deep understanding of power systems analysis. These complementary approaches therefore provide a fresh perspective on how to model, simulate and analyse power systems. It presents methodological approaches for modelling of system components, including both classical and non-conventional devices used in generation, transmission and distribution systems, discussing relevant assumptions and implications on performance assessment. This background is complemented with several guidelines for advanced use of DSL and DPL languages as well as for interfacing with other software packages, which is of great value for creating and performing different types of steady-state and dynamic performance simulation analysis. All employed test case studies are provided as supporting material to the reader to ease recreation of all examples presented in the book as well as to facilitate their use in other cases related to planning and operation studies. Providing an invaluable resource for the formal instruction of power system undergraduate/postgraduate students, this book is also a useful reference for engineers working in power system operation and planning.

Download or read book Analysis and Damping Control of Power System Low frequency Oscillations written by Haifeng Wang and published by Springer. This book was released on 2016-03-30 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the research and development results on power systems oscillations in three categories of analytical methods. First is damping torque analysis which was proposed in 1960’s, further developed between 1980-1990, and widely used in industry. Second is modal analysis which developed between the 1980’s and 1990’s as the most powerful method. Finally the linearized equal-area criterion analysis that is proposed and developed recently. The book covers three main types of controllers: Power System Stabilizer (PSS), FACTS (Flexible AC Transmission Systems) stabilizer, and ESS (Energy Storage Systems) stabilizer. The book provides a systematic and detailed introduction on the subject as the reference for industry applications and academic research.

Download or read book VSC FACTS HVDC written by Enrique Acha and published by John Wiley & Sons. This book was released on 2019-08-05 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative reference on the new generation of VSC-FACTS and VSC-HVDC systems and their applicability within current and future power systems VSC-FACTS-HVDC and PMU: Analysis, Modelling and Simulation in Power Grids provides comprehensive coverage of VSC-FACTS and VSC-HVDC systems within the context of high-voltage Smart Grids modelling and simulation. Readers are presented with an examination of the advanced computer modelling of the VSC-FACTS and VSC-HVDC systems for steady-state, optimal solutions, state estimation and transient stability analyses, including numerous case studies for the reader to gain hands-on experience in the use of models and concepts. Key features: Wide-ranging treatment of the VSC achieved by assessing basic operating principles, topology structures, control algorithms and utility-level applications. Detailed advanced models of VSC-FACTS and VSC-HVDC equipment, suitable for a wide range of power network-wide studies, such as power flows, optimal power flows, state estimation and dynamic simulations. Contains numerous case studies and practical examples, including cases of multi-terminal VSC-HVDC systems. Includes a companion website featuring MATLAB software and Power System Computer Aided Design (PSCAD) scripts which are provided to enable the reader to gain hands-on experience. Detailed coverage of electromagnetic transient studies of VSC-FACTS and VSC-HVDC systems using the de-facto industry standard PSCAD/EMTDC simulation package. An essential guide for utility engineers, academics, and research students as well as industry managers, engineers in equipment design and manufacturing, and consultants.

Download or read book Introduction to FACTS Controllers written by Kalyan K. Sen and published by John Wiley & Sons. This book was released on 2009-10-13 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demystifies FACTS controllers, offering solutions to power control and power flow problems Flexible alternating current transmission systems (FACTS) controllers represent one of the most important technological advances in recent years, both enhancing controllability and increasing power transfer capacity of electric power transmission networks. This timely publication serves as an applications manual, offering readers clear instructions on how to model, design, build, evaluate, and install FACTS controllers. Authors Kalyan Sen and Mey Ling Sen share their two decades of experience in FACTS controller research and implementation, including their own pioneering FACTS design breakthroughs. Readers gain a solid foundation in all aspects of FACTS controllers, including: Basic underlying theories Step-by-step evolution of FACTS controller development Guidelines for selecting the right FACTS controller Sample computer simulations in EMTP programming language Key differences in modeling such FACTS controllers as the voltage regulating transformer, phase angle regulator, and unified power flow controller Modeling techniques and control implementations for the three basic VSC-based FACTS controllers—STATCOM, SSSC, and UPFC In addition, the book describes a new type of FACTS controller, the Sen Transformer, which is based on technology developed by the authors. An appendix presents all the sample models that are discussed in the book, and the accompanying FTP site offers many more downloadable sample models as well as the full-color photographs that appear throughout the book. This book is essential reading for practitioners and students of power engineering around the world, offering viable solutions to the increasing problems of grid congestion and power flow limitations in electric power transmission systems.

Download or read book A Survey of Relaxations and Approximations of the Power Flow Equations written by Daniel K. Molzahn and published by . This book was released on 2019-02-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The techniques described in this monograph form the basis of running an optimally efficient modern day power system. It is a must-read for all students and researchers working on the cutting edge of electric power systems.

Download or read book Power Electronic Control in Electrical Systems written by Enrique Acha and published by Newnes. This book was released on 2002-01-08 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within this book the fundamental concepts associated with the topic of power electronic control are covered alongside the latest equipment and devices, new application areas and associated computer-assisted methods. *A practical guide to the control of reactive power systems *Ideal for postgraduate and professional courses *Covers the latest equipment and computer-aided analysis.

Download or read book Innovations in Electrical and Electronic Engineering written by Saad Mekhilef and published by Springer Nature. This book was released on 2021-05-24 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 2021 International Conference on Electrical and Electronics Engineering (ICEEE 2020), held on January 2–3, 2021. The book focuses on the current developments in various fields of electrical and electronics engineering, such as power generation, transmission and distribution; renewable energy sources and technologies; power electronics and applications; robotics; artificial intelligence and IoT; control, automation and instrumentation; electronics devices, circuits and systems; wireless and optical communication; RF and microwaves; VLSI; and signal processing. The book is a valuable resource for academics and industry professionals alike.

Download or read book Computer Methods in Power System Analysis written by Glenn W. Stagg and published by . This book was released on 1968 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book FACTS written by Enrique Acha and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide comprehensive coverage of FACTS power systems modeling and simulation. * Detailed coverage of the development of FACTS controllers and guidance on the selection of appropriate equipment * Computer modelling examples of the FACTS controllers for steady-state and transient stability systems * Numerous case studies and practical examples

Download or read book Power Generation Operation and Control written by Allen J. Wood and published by John Wiley & Sons. This book was released on 2012-11-07 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text on the operation and control of power generation and transmission systems In the ten years since Allen J. Wood and Bruce F. Wollenberg presented their comprehensive introduction to the engineering and economic factors involved in operating and controlling power generation systems in electric utilities, the electric power industry has undergone unprecedented change. Deregulation, open access to transmission systems, and the birth of independent power producers have altered the structure of the industry, while technological advances have created a host of new opportunities and challenges. In Power Generation, Operation, and Control, Second Edition, Wood and Wollenberg bring professionals and students alike up to date on the nuts and bolts of the field. Continuing in the tradition of the first edition, they offer a practical, hands-on guide to theoretical developments and to the application of advanced operations research methods to realistic electric power engineering problems. This one-of-a-kind text also addresses the interaction between human and economic factors to prepare readers to make real-world decisions that go beyond the limits of mere technical calculations. The Second Edition features vital new material, including: * A computer disk developed by the authors to help readers solve complicated problems * Examination of Optimal Power Flow (OPF) * Treatment of unit commitment expanded to incorporate the Lagrange relaxation technique * Introduction to the use of bounding techniques and other contingency selection methods * Applications suited to the new, deregulated systems as well as to the traditional, vertically organized utilities company Wood and Wollenberg draw upon nearly 30 years of classroom testing to provide valuable data on operations research, state estimation methods, fuel scheduling techniques, and more. Designed for clarity and ease of use, this invaluable reference prepares industry professionals and students to meet the future challenges of power generation, operation, and control.