Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Mechanics of Thin Walled Structures written by Yury Vetyukov and published by Springer Science & Business Media. This book was released on 2014-01-23 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a hybrid approach to the mechanics of thin bodies. Classical theories of rods, plates and shells with constrained shear are based on asymptotic splitting of the equations and boundary conditions of three-dimensional elasticity. The asymptotic solutions become accurate as the thickness decreases, and the three-dimensional fields of stresses and displacements can be determined. The analysis includes practically important effects of electromechanical coupling and material inhomogeneity. The extension to the geometrically nonlinear range uses the direct approach based on the principle of virtual work. Vibrations and buckling of pre-stressed structures are studied with the help of linearized incremental formulations, and direct tensor calculus rounds out the list of analytical techniques used throughout the book. A novel theory of thin-walled rods of open profile is subsequently developed from the models of rods and shells, and traditionally applied equations are proven to be asymptotically exact. The influence of pre-stresses on the torsional stiffness is shown to be crucial for buckling analysis. Novel finite element schemes for classical rod and shell structures are presented with a comprehensive discussion regarding the theoretical basis, computational aspects and implementation details. Analytical conclusions and closed-form solutions of particular problems are validated against numerical results. The majority of the simulations were performed in the Wolfram Mathematica environment, and the compact source code is provided as a substantial and integral part of the book.
Download or read book Thermal Stresses IV written by R.B. Hetnarski and published by Elsevier. This book was released on 1996-05-10 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth volume of the handbook Thermal Stresses. Following the principles established when the first volume was published in 1986, the fourth volume consists of six separate chapters prepared by specialists in the field. Each chapter is devoted to a different topic in the area of Thermal Stresses. Many results have been published for the first time in Thermal Stresses IV. The exposition of the material is on the state-of-the art level, which should be appropriate for graduate students, researchers, and engineers specializing in the field of stress analysis. In most cases the material is presented with some historical perspective.A large number of references provided will allow the readers to augment their knowledge, after studying a particular chapter.
Download or read book Composite Structures written by I.H. Marshall and published by Springer. This book was released on 1991-09-30 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers contained herein were presented at the Sixth International Conference on Composite Structures (ICCS/6) held at Paisley College, Scotland in September 1991. The Conference was organised and sponsored by Paisley College. It was co-sponsored by Scottish Enterprise, the National Engineering Laboratory, the US Army Research, Development and Standardisation Group-UK, Strathclyde Regional Council and Renfrew District Council. It forms a natural and ongoing progression from the highly successful ICCS/1/2/3/4 and 5 held at Paisley in 1981, 1983, 1985, 1987 and 1989 respectively. As we enter the final decade of this century many organisations throughout the world are adopting a prophetic role by attempting to forecast future scientific advances and their associated impact on mankind. Although some would argue that to do so is folly, without such futuristic visionaries the world would be that much poorer. IntelJigent speculation based on research trends and historical advances, rather than fanciful theories, breathes a healthy air of enthusiasm into the scientific community. Surely this is the very oxygen necessary to ignite the fir~s of innovation and invention amongst pioneers of research.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unified Theory of Concrete Structures written by Thomas T. C. Hsu and published by John Wiley & Sons. This book was released on 2010-03-16 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unified Theory of Concrete Structures develops an integrated theory that encompasses the various stress states experienced by both RC & PC structures under the various loading conditions of bending, axial load, shear and torsion. Upon synthesis, the new rational theories replace the many empirical formulas currently in use for shear, torsion and membrane stress. The unified theory is divided into six model components: a) the struts-and-ties model, b) the equilibrium (plasticity) truss model, c) the Bernoulli compatibility truss model, d) the Mohr compatibility truss model, e) the softened truss model, and f) the softened membrane model. Hsu presents the six models as rational tools for the solution of the four basic types of stress, focusing on the significance of their intrinsic consistencies and their inter-relationships. Because of its inherent rationality, this unified theory of reinforced concrete can serve as the basis for the formulation of a universal and international design code. Includes an appendix and accompanying website hosting the authors’ finite element program SCS along with instructions and examples Offers comprehensive coverage of content ranging from fundamentals of flexure, shear and torsion all the way to non-linear finite element analysis and design of wall-type structures under earthquake loading. Authored by world-leading experts on torsion and shear
Download or read book Advances in Finite Deformation Problems in Materials Processing and Structures written by American Society of Mechanical Engineers. Winter Annual Meeting and published by American Society of Mechanical Engineers. This book was released on 1991 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasticity in Reinforced Concrete written by Wai-Fah Chen and published by J. Ross Publishing. This book was released on 2007 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: J. Ross Publishing Classics are world-renowned texts and monographs written bt preeminent scholars. These books are available to students, researchers, professionals, and libararies.
Download or read book Aerospace Science and Engineering written by Sara Bagassi and published by Materials Research Forum LLC. This book was released on 2023-10-01 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers of this conference focus on the following topics: dynamics and control, navigation, aeroacoustics, fluid dynamics, human-machine interaction, structures, maintenance and operations, sustainability of aeronautics and space, space economy, propulsion, additive manufacturing, sensors, aerospace systems, aeroelasticity, artificial intelligence, and UAV (unmanned aerial vehicle). Keywords: Autonomous Navigation, Visual Navigation, Space Mission, Radar Detection. Aeroacoustics, Plasma Formation, Digital Technologies, Heat Transfer, Vibration Analysis, Future Passenger Aircraft, Acoustic Metamaterial Design, Highly Energetic Materials, Bistatic Radar, Helicopter Tracking, Supersonic Parachute, Dynamical Modeling, Composite Beams, Additive Manufacturing, BCC Cell Characterization, Interplanetary Trajectory Design, Thermoelastic Properties of Composites, Offner Spectrometer, Nanosatellite, Aeroelastic Analysis, Fluid-Structure Interaction Models, Composite Laminates, Climate Change, AI Autonomous Navigation, Optical Sensors, Cyberattacks, Optical Fiber Sensor, Fracture Analysis, Deep-Space Autonomous Navigation, Noise Sources. Photogrammetric Analysis, Acoustic Metamaterials, CO2 Emission, Supersonic Transport.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Conference on Creep written by and published by . This book was released on 1986 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1998-04 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 14th International Conference on the Technology of Plasticity Current Trends in the Technology of Plasticity written by Katia Mocellin and published by Springer Nature. This book was released on 2023-09-19 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of metal forming, as presented by leading international researchers and engineers at the 14th International Conference on Technology of Plasticity (ICTP), held in Mandelieu-La Napoule, France on September 24-29, 2023. It covers a diverse range of topics such as manufacturing processes & equipment, materials behavior and characterization, microstructure design by forming, surfaces & interfaces, control & optimization, green / sustainable metal forming technologies, digitalization & AI in metal forming, multi-material processing, agile / flexible metal forming processes, forming of non-metallic materials, micro-forming and luxury applications. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Cellular and Porous Materials in Structures and Processes written by Holm Altenbach and published by Springer Science & Business Media. This book was released on 2011-01-27 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the state-of-the-art treatment in modelling and experimental investigation of the mechanical behaviour of cellular and porous materials. Starting from the continuum mechanical modelling, to the numerical simulation, several important questions related to applications such as the fracture and impact behaviour are covered.
Download or read book Beam Structures written by Erasmo Carrera and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beam theories are exploited worldwide to analyze civil, mechanical, automotive, and aerospace structures. Many beam approaches have been proposed during the last centuries by eminent scientists such as Euler, Bernoulli, Navier, Timoshenko, Vlasov, etc. Most of these models are problem dependent: they provide reliable results for a given problem, for instance a given section and cannot be applied to a different one. Beam Structures: Classical and Advanced Theories proposes a new original unified approach to beam theory that includes practically all classical and advanced models for beams and which has become established and recognised globally as the most important contribution to the field in the last quarter of a century. The Carrera Unified Formulation (CUF) has hierarchical properties, that is, the error can be reduced by increasing the number of the unknown variables. This formulation is extremely suitable for computer implementations and can deal with most typical engineering challenges. It overcomes the problem of classical formulae that require different formulas for tension, bending, shear and torsion; it can be applied to any beam geometries and loading conditions, reaching a high level of accuracy with low computational cost, and can tackle problems that in most cases are solved by employing plate/shell and 3D formulations. Key features: compares classical and modern approaches to beam theory, including classical well-known results related to Euler-Bernoulli and Timoshenko beam theories pays particular attention to typical applications related to bridge structures, aircraft wings, helicopters and propeller blades provides a number of numerical examples including typical Aerospace and Civil Engineering problems proposes many benchmark assessments to help the reader implement the CUF if they wish to do so accompanied by a companion website hosting dedicated software MUL2 that is used to obtain the numerical solutions in the book, allowing the reader to reproduce the examples given in the book as well as to solve other problems of their own www.mul2.com Researchers of continuum mechanics of solids and structures and structural analysts in industry will find this book extremely insightful. It will also be of great interest to graduate and postgraduate students of mechanical, civil and aerospace engineering.
Download or read book Proceedings of 8th GACM Colloquium on Computational Mechanics written by Tobias Gleim and published by kassel university press GmbH. This book was released on 2019-09-04 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference book contains papers presented at the 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry. The conference was held from August 28th – 30th, 2019 in Kassel, hosted by the Institute of Mechanics and Dynamics of the department for civil and environmental engineering and by the chair of Engineering Mechanics / Continuum Mechanics of the department for mechanical engineering of the University of Kassel. The aim of the conference is, to bring together young scientits who are engaged in academic and industrial research on Computational Mechanics and Computer Methods in Applied Sciences. It provides a plattform to present and discuss recent results from research efforts and industrial applications. In more than 150 presentations, given by young scientists, current scientific developments and advances in engineering practice in this field are presented and discussed. The contributions of the young researchers are supplemented by a poster session and plenary talks from four senior scientists from academia and industry as well as from the GACM Best PhD Award winners 2017 and 2018.
Download or read book Japanese Science and Technology 1983 1984 written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch and published by . This book was released on 1985 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:
