Download or read book Une nouvelle contribution la compr hension de m cansimes de rupture de fibres de polyamides 6 6 usages techniques et textiles written by Lassad Nasri and published by . This book was released on 2000 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: La rupture des fibres organiques a suscité l'intérêt de nombreux chercheurs et ce depuis les années 40, c'est à dire peu de temps après l'apparition de la première fibre chimique. De nombreux modes de sollicitations ont été étudiés : traction simple, fatique, fluage... Ces études montrent que la rupture par fatique présente un morphologie nettement différente de cette de la traction simple. De plus, cette rupture par fatique se produit à des charges de l'ordre de 50 à 70% de la charge de rupture par traction simple, ce qui la rend beaucoup plus problèmatique et souvent imprévisible. Malgré les nombreux travaux réalisés dans ce domaine, les résultats obtenus sont souvent restés disparates et insuffisants pour expliquer clairement les mécanismes de rupture mis en jeu en fonction de la nature du test mécanique appliqué. Notre étude est donc une nouvelle tentative d'étude et d'analyse des différents types de ruptures mécaniques afin d'expliquer les mécanismes responsables de ces ruptures. Le présent travail a porté sur des échantillons à usages classiques (exp. renforcement pneumatique).
Download or read book M canismes d usure de polym res orient s written by Juliette Cayer-Barrioz and published by . This book was released on 2003 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: La résistance à l'abrasion des fibres est une propriété d'usage fondamentale dans de nombreuses applications techniques de surfaces textiles. Cette étude s'intéresse donc aux mécanismes d'usure des fibres. Une caractérisation mécanique et structurale met en évidence l'hétérogénéité et la forte anisotropie de la structure microfibrillaire. Un tribomètre simulant l'abrasion des fibres dans des conditions maîtrisées, a été développé. Une équivalence des mécanismes d'usure et de rupture des fibres est observée, indépendamment de la nature de la fibre et des conditions de sollicitation. Des expériences de nanofrottement soulignent le rôle des fluctuations de vitesses locales sur le frottement et la présence de cisaillement dans une zone interfaciale située entre la pointe et la fibre. Un mécanisme lélémentaire d'usure est alors proposé. Enfin, l'étude des relations usure/structure/propriétés mécaniques conduit à établir une loi d'évolution de l'usure.
Download or read book Industrial Applications of Natural Fibres written by Jörg Müssig and published by John Wiley & Sons. This book was released on 2010-04-15 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fibres are becoming increasingly popular for use in industrial applications, providing sustainable solutions to support technical innovation. These versatile, natural based materials have applications in a wide range of industries, from textiles and consumer products to the automotive and construction industries. Industrial Applications of Natural Fibres examines the different steps of processing, from natural generation, fibre separation and fibre processing, to the manufacturing of the final product. Each step is linked to fibre properties and characterization, highlighting how different fibres influence the product properties through a discussion of their chemical and structural qualities. Considering the value-added chain from natural generation to final product, with emphasis on quality management, this book reviews the current research and technical applications of natural fibres. Topics covered include: Introduction to the Chemistry and Biology of Natural Fibres Economic Aspects of Natural Fibres Vegetable Fibres Animal Fibres Testing and Quality Management Applications: Current and Potential Industrial Application of Natural Fibres will be a valuable resource for scientists in industry and academia interested in the development of natural based materials and products. It is particularly relevant for those working in chemical engineering, sustainable chemistry, agricultural sciences, biology and materials sciences.
Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.
Download or read book Physical Properties of Polymers written by James E. Mark and published by . This book was released on 1993 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents have been divided into sections on physical states of polymers and characterization techniques. Chapters on physical states include discussions of the rubber elastic state, the glassy state, melts and concentrated solutions, the crystalline state, and the mesomorphic state. Characterization techniques described are molecular spectroscopy and scattering techniques.
Download or read book Advances in Engineering Design written by Preeti Joshi and published by Springer Nature. This book was released on 2021-03-31 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). The book focuses on latest research in mechanical engineering design and covers topics such as computational mechanics, finite element modeling, computer aided engineering and analysis, fracture mechanics, and vibration. The book brings together different aspects of engineering design and the contents will be useful for researchers and professionals working in this field.
Download or read book Advances in Mechanisms Design written by Jaroslav Beran and published by Springer. This book was released on 2014-09-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on the Theory of Machines and Mechanisms is organized every four years, under the auspices of the International Federation for the Promotion of Mechanism and Machine Science (IFToMM) and the Czech Society for Mechanics. This eleventh edition of the conference took place at the Technical University of Liberec, Czech Republic, 4-6 September 2012. This volume offers an international selection of the most important new results and developments, in 73 papers, grouped in seven different parts, representing a well-balanced overview, and spanning the general theory of machines and mechanisms, through analysis and synthesis of planar and spatial mechanisms, dynamics of machines and mechanisms, linkages and cams, computational mechanics, rotor dynamics, biomechanics, mechatronics, vibration and noise in machines, optimization of mechanisms and machines, control and monitoring systems of machines, accuracy and reliability of machines and mechanisms, robots and manipulators to the mechanisms of textile machines.
Download or read book Dynamic Behavior of Materials Volume 1 written by Bo Song and published by Springer. This book was released on 2015-10-23 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1 represents the first of nine volumes of technical papers presented at the Society for Experimental Mechanics SEM 15th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 8-11, 2015. The full set of proceedings also includes volumes on: Challenges in Mechanics of Time Dependent Materials, Advancement of Optical Methods in Experimental Mechanics, Experimental and Applied Mechanics 16th International Symposium on MEMS and Nanotechnology, 5th International Symposium on the Mechanics of Biological Systems and Materials, International Symposium on the Mechanics of Composite and Multi-functional Materials, Fracture, Fatigue, Failure and Damage Evolution; and Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems.
Download or read book Microencapsulation written by Simon Benita and published by CRC Press. This book was released on 2005-11-01 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting breakthrough research pertinent to scientists in a wide range of disciplines-from medicine and biotechnology to cosmetics and pharmacy-this Second Edition provides practical approaches to complex formulation problems encountered in the development of particulate delivery systems at the micro- and nano-size level. Completely revised and e
Download or read book Geotechnics for Sustainable Infrastructure Development written by Phung Duc Long and published by Springer Nature. This book was released on 2019-11-28 with total page 1417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents 09 keynote and invited lectures and 177 technical papers from the 4th International Conference on Geotechnics for Sustainable Infrastructure Development, held on 28-29 Nov 2019 in Hanoi, Vietnam. The papers come from 35 countries of the five different continents, and are grouped in six conference themes: 1) Deep Foundations; 2) Tunnelling and Underground Spaces; 3) Ground Improvement; 4) Landslide and Erosion; 5) Geotechnical Modelling and Monitoring; and 6) Coastal Foundation Engineering. The keynote lectures are devoted by Prof. Harry Poulos (Australia), Prof. Adam Bezuijen (Belgium), Prof. Delwyn Fredlund (Canada), Prof. Lidija Zdravkovic (UK), Prof. Masaki Kitazume (Japan), and Prof. Mark Randolph (Australia). Four invited lectures are given by Prof. Charles Ng, ISSMGE President, Prof.Eun Chul Shin, ISSMGE Vice-President for Asia, Prof. Norikazu Shimizu (Japan), and Dr.Kenji Mori (Japan).
Download or read book Proof Theory and Automated Deduction written by Jean Goubault-Larrecq and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in computer applications has led to a new attitude to applied logic in which researchers tailor a logic in the same way they define a computer language. In response to this attitude, this text for undergraduate and graduate students discusses major algorithmic methodologies, and tableaux and resolution methods. The authors focus on first-order logic, the use of proof theory, and the computer application of automated searches for proofs of mathematical propositions. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Adhesive Joints Formation Characteristics and Testing written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-27 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second International Symposium on Adhesive Joints: Formation, Characteristics and Testing held in Newark, NJ, May 22-24, 2000. Since the first symposium, held in 1982, there had been tremendous research activity dealing with many aspects of adhesive joints. This volume contains a total of 21 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. The book is divided into three parts: 1) General Papers; 2) Evaluation, Analysis and Testing; and 3) Durability Aspects. The topics covered include: molecular brush concepts in enhancing strength of adhesive joints; factors affecting performance of adhesive joints; substrate preparation and modification; interfacial/interphasial aspects; determination of locus of failure; analysis and evaluation of adhesive joints using various techniques; testing of adhesive joints; stress analysis; application of fracture mechanics; durability aspects; accelerated environmental degradation of adhesive joints; solvent uptake; and adhesives with special characteristics. This volume represents a commentary on the current R&D activity in this arena and it should be of great value and interest to anyone interested in adhesive bonding / adhesive joints. Furthermore, this volume contains a number of excellent review/overview articles, which should be of particular value.
Download or read book Encapsulations written by Alexandru Grumezescu and published by Academic Press. This book was released on 2016-05-27 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encapsulations, a volume in the Nanotechnology in the Agri-Food Industry series,presents key elements in establishing food quality through the improvement of food flavor and aroma. The major benefits of nanoencapsulation for food ingredients include improvement in bioavailability of flavor and aroma ingredients, improvement in solubility of poor water-soluble ingredients, higher ingredient retention during production process, higher activity levels of encapsulated ingredients, improved shelf life, and controlled release of flavor and aroma. This volume discusses main nanoencapsulation processes such as spray drying, melt injection, extrusion, coacervation, and emulsification. The materials used in nanoencapsulation include lipids, proteins, carbohydrates, cellulose, gums, and food grade polymers. Applications and benefits of nanoencapsulation such as controlled release, protections, and taste masking will be explained in detail. Includes the most up-to-date information on nanoencapsulation and nanocontainer-based delivery of antimicrobials Presents nanomaterials for innovation based on scientific advancements in the field Provides control release strategies to enhance bioactivity, including methods and techniques for research and innovation Provides useful tools to improve the delivery of bioactive molecules and living cells into foods
Download or read book Geotextiles written by Robert Koerner and published by Woodhead Publishing. This book was released on 2016-02-11 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotextiles: From Design to Applications presents valuable information on the high performance fabrics used in soil separation, drainage, filtration, reinforcement, and cushioning. These polymeric materials offer solutions for geoengineering and other civil engineering specialties due to their advanced physical, mechanical, hydraulic, and endurance properties. This important book offers comprehensive coverage of the manufacture, functions, properties, designs, and applications of geotextiles. Part One begins with a chapter on the history of geotextiles, followed by chapters giving detailed reviews of the types of fabrics and their manufacturing processes, from resin type, to fiber extrusion, to textile fabrication. Part Two covers the properties, behavior, and testing of geotextiles, with Part Three focusing on applications dealing with the specific primary functions of geotextiles. In Part Four, chapters offer numerous general applications of geotextiles, including those in waste containment, marine engineering, walls/slopes, agriculture, and erosion control. Finally, the chapters of Part Five address quality control and assurance for geotextiles, and the increasingly important topic of sustainability. - Reviews the types of fabrics used for geotextiles and their manufacturing processes - Covers the properties, behavior, and testing of geotextiles - Contains detailed discussions of the primary functions of geotextiles and their wide range of applications
Download or read book In Situ Gelling Polymers written by Xian Jun Loh and published by Springer. This book was released on 2014-10-01 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the research involving in situ gelling polymers and can be used as a guidebook for academics, industrialists and postgraduates interested in this area. This work summaries the academic contributions from the top authorities in the field and explore the fundamental principles of in situ gelling polymeric networks, along with examples of their major applications. This book aims to provide an up-to-date resource of in situ gelling polymer research.
Download or read book Wood Adhesives written by Antonio Pizzi and published by CRC Press. This book was released on 2011-01-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood adhesives are of tremendous industrial importance, as more than two-thirds of wood products in the world today are completely or partially bonded together using a variety of adhesives. Adhesive bonding offers many advantages over other joining methods for wood components, and there has been a great deal of R& D activity in devising new wood adhesives or improving the existing ones. The modern mantra in all industrial sectors is: "think green, go green," which has attracted much attention in the wood adhesive industry. Therefore, there is also a lot of research activity in synthesizing environmentally benign and human-friendly wood adhesives. This book is divided into four parts: Part 1: Fundamental Adhesion Aspects in Wood Bonding; Part 2: Synthetic Adhesives; Part 3: Environment-friendly adhesives; and Part 4: Wood Welding and General Paper. It addresses many different types of wood adhesives, as well as bonding (welding) of wood components without adhesives, a more recent development. The information contained in this book is valuable for individuals engaged in all aspects of wood adhesion and adhesives and, hopefully, will inspire new ideas in wood adhesives, a topic of vital industrial importance.
Download or read book Unsteady Transonic Flow written by Mårten T. Landahl and published by Courier Dover Publications. This book was released on 2019-04-17 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic monograph on unsteady transonic flow — the flow of air encountered at speeds at or near the speed of sound — is of continuing interest to students and professionals in aerodynamics, fluid dynamics, and other areas of applied mathematics. After a brief Introduction, Swedish physicist Mårten T. Landahl presents a chapter in which the two-dimensional solution is derived, succeeded by a discussion of its relation to the subsonic and supersonic solutions. Three chapters on low aspect ratio configurations follow, covering triangular wings and similar planforms with curved leading edges, rectangular wings, and cropped delta wings, and low aspect ratio wing-body combinations. The treatment concludes with a consideration of the experimental determination of air forces on oscillating wings at transonic speeds.
