Download or read book Understanding of Defect Physics in Polycrystalline Photovoltaic Materials Preprint written by and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance of thin-film solar cells is influenced by the quality of interfaces and formation of defects such as point defects, stacking faults, twins, dislocations, and grain boundaries. It is important to understand the defect physics so that appropriate methods may be developed to suppress the formation of harmful defects. Here, we review our understanding of defect physics in thin-filmphotovoltaic (PV) materials such as Si, CdTe, Cu(In,Ga)Se2 (CIGS), Cu2ZnSnSe2 (CZTSe), and Cu2ZnSnS2 (CZTS) using the combination of nanoscale electron microscopy characterization and density-functional theory (DFT). Although these thin-film PV materials share the same basic structural feature - diamond structure based - the defect physics in them could be very different. Some defects, such asstacking faults and special twins, have similar electronic properties in these thin-film materials. However, some other defects, such as grain boundaries and interfaces, have very different electronic properties in these materials. For example, grain boundaries produce harmful deep levels in Si and CdTe, but they do not produce significant deep levels in CIGS, CZTSe, and CZTS. These explain whypassivation is critical for Si and CdTe solar cells, but is less important in CIS and CZTS solar cells. We further provide understanding of the effects of interfaces on the performance of solar cells made of these PV materials.
Download or read book Understanding of Defect Physics in Polycrystalline Photovoltaic Materials written by Yanfa Yan and published by . This book was released on 2011 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance of thin-film solar cells is influenced by the quality of interfaces and formation of defects such as point defects, stacking faults, twins, dislocations, and grain boundaries. It is important to understand the defect physics so that appropriate methods may be developed to suppress the formation of harmful defects. Here, we review our understanding of defect physics in thin-film photovoltaic (PV) materials such as Si, CdTe, Cu(In, Ga)Se2 (CIGS), Cu2ZnSnSe2 (CZTSe), and Cu2ZnSnS2 (CZTS) using the combination of nanoscale electron microscopy characterization and density-functional theory (DFT). Although these thin-film PV materials share the same basic structural feature - diamond structure based - the defect physics in them could be very different. Some defects, such as stacking faults and special twins, have similar electronic properties in these thin-film materials. However, some other defects, such as grain boundaries and interfaces, have very different electronic properties in these materials. For example, grain boundaries produce harmful deep levels in Si and CdTe, but they do not produce significant deep levels in CIGS, CZTSe, and CZTS. These explain why passivation is critical for Si and CdTe solar cells, but is less important in CIS and CZTS solar cells. We further provide understanding of the effects of interfaces on the performance of solar cells made of these PV materials.
Download or read book Copper Zinc Tin Sulfide Based Thin Film Solar Cells written by Kentaro Ito and published by John Wiley & Sons. This book was released on 2015-02-23 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with an overview and historical background of Copper Zinc Tin Sulphide (CZTS) technology, subsequent chapters cover properties of CZTS thin films, different preparation methods of CZTS thin films, a comparative study of CZTS and CIGS solar cell, computational approach, and future applications of CZTS thin film solar modules to both ground-mount and rooftop installation. The semiconducting compound (CZTS) is made up earth-abundant, low-cost and non-toxic elements, which make it an ideal candidate to replace Cu(In,Ga)Se2 (CIGS) and CdTe solar cells which face material scarcity and toxicity issues. The device performance of CZTS-based thin film solar cells has been steadily improving over the past 20 years, and they have now reached near commercial efficiency levels (10%). These achievements prove that CZTS-based solar cells have the potential to be used for large-scale deployment of photovoltaics. With contributions from leading researchers from academia and industry, many of these authors have contributed to the improvement of its efficiency, and have rich experience in preparing a variety of semiconducting thin films for solar cells.
Download or read book Grain boundary Physics in Polycrystalline Photovoltaic Materials written by and published by . This book was released on 2008 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: We use the combination of high-resolution electron microscopy and density-functional theory to study the atomic structure and electronic effects of grain boundaries in polycrystalline photovoltaic materials such as Si, CdTe, CuInSe2, and CuGaSe2. We find that grain boundaries containing dislocation cores create deep levels in Si, CdTe, and CuGaSe2. Surprisingly, however, they do not create deep levels in CuInSe2. We further find that the presence of Ga in grain boundaries in CuInSe2 generates deep levels. These results may explain the fact that Si and CdTe solar cells usually require special passivation, whereas CuInSe2 solar cells do not. The passivation of grain boundaries in Si and CdTe is also studied. We find that grain boundaries in CdTe can be passivated very well by Cl, Br, and I.
Download or read book Photovoltaic Materials written by Bube Richard H and published by World Scientific. This book was released on 1998-05-30 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and development of photovoltaic solar cells is playing an ever larger practical role in energy supply and ecological conservation all over the world. Many materials science problems are encountered in understanding existing solar cells and the development of more efficient, less costly, and more stable cells. This important and timely book provides a historical overview, but concentrates primarily on exciting developments in the last decade. It describes the properties of the materials that play an important role in photovoltaic applications, the solar cell structures in which they are used, and the experimental and theoretical developments that have led to the most promising contenders./a
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Energy written by Arno Smets and published by Bloomsbury Publishing. This book was released on 2016-01-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a broad overview on the different aspects of solar energy, with a focus on photovoltaics, which is the technology that allows light energy to be converted into electric energy. Renewable energy sources have become increasingly popular in recent years, and solar is one of the most adaptable and attractive types – from solar farms to support the National Grid to roof panels/tiles used for solar thermal heating systems, and small solar garden lights. Written by Delft University researchers, Solar Energy uniquely covers both the physics of photovoltaic (PV) cells and the design of PV systems for real-life applications, from a concise history of solar cells components and location issues of current systems. The book is designed to make this complicated subject accessible to all, and is packed with fascinating graphs and charts, as well as useful exercises to cement the topics covered in each chapter. Solar Energy outlines the fundamental principles of semiconductor solar cells, as well as PV technology: crystalline silicon solar cells, thin-film cells, PV modules, and third-generation concepts. There is also background on PV systems, from simple stand-alone to complex systems connected to the grid. This is an invaluable reference for physics students, researchers, industrial engineers and designers working in solar energy generation, as well those with a general interest in renewable energy.
Download or read book Solar Cells and Modules written by Arvind Shah and published by Springer Nature. This book was released on 2020-07-16 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.
Download or read book 2016 IEEE 43rd Photovoltaic Specialists Conference PVSC written by IEEE Staff and published by . This book was released on 2016-06-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: scientific and engineering technical conference covering all aspects of photovoltaics materials, devices, systems and reliability
Download or read book X Ray Diffraction by Polycrystalline Materials written by René Guinebretière and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a physical approach to the diffraction phenomenon and its applications in materials science. An historical background to the discovery of X-ray diffraction is first outlined. Next, Part 1 gives a description of the physical phenomenon of X-ray diffraction on perfect and imperfect crystals. Part 2 then provides a detailed analysis of the instruments used for the characterization of powdered materials or thin films. The description of the processing of measured signals and their results is also covered, as are recent developments relating to quantitative microstructural analysis of powders or epitaxial thin films on the basis of X-ray diffraction. Given the comprehensive coverage offered by this title, anyone involved in the field of X-ray diffraction and its applications will find this of great use.
Download or read book Computational Materials Discovery written by Artem Oganov and published by Royal Society of Chemistry. This book was released on 2018-10-30 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique and timely book providing an overview of both the methodologies and applications of computational materials design.
Download or read book Next Generation of Photovoltaics written by Ana Cristobal and published by Springer Science & Business Media. This book was released on 2012-02-16 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new concepts for a next generation of PV. Among these concepts are: Multijunction solar cells, multiple excitation solar cells (or how to take benefit of high energy photons for the creation of more than one electron hole-pair), intermediate band solar cells (or how to take advantage of below band-gap energy photons) and related technologies (for quantum dots, nitrides, thin films), advanced light management approaches (plasmonics). Written by world-class experts in next generation photovoltaics this book is an essential reference guide accessible to both beginners and experts working with solar cell technology. The book deeply analyzes the current state-of-the-art of the new photovoltaic approaches and outlines the implementation paths of these advanced devices. Topics addressed range from the fundamentals to the description of state-of-the-art of the new types of solar cells.
Download or read book Crystalline Silicon Solar Cells written by Adolf Goetzberger and published by . This book was released on 1998 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dielectric Phenomena in Solids written by Kwan Chi Kao and published by Elsevier. This book was released on 2004-05-11 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: In general, a dielectric is considered as a non-conducting or insulating material (such as a ceramic or polymer used to manufacture a microelectronic device). This book describes the laws governing all dielectric phenomena.·A unified approach is used in describing each of the dielectric phenomena, with the aim of answering "what?", "how?" and "why" for the occurrence of each phenomenon;·Coverage unavailable in other books on ferroelectrics, piezoelectrics, pyroelectrics, electro-optic processes, and electrets;·Theoretical analyses are general and broadly applicable;·Mathematics is simplified and emphasis is placed on the physical insight of the mechanisms responsible for the phenomena;·Truly comprehensive coverage not available in the current literature.
Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.
Download or read book Solar Energy Update written by and published by . This book was released on 1985 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SERI Photovoltaic Advanced Research and Development Bibliography 1982 1985 written by and published by . This book was released on 1986 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
