Download or read book Understanding and Supporting Product Service System Designing written by Abhijna Neramballi and published by Linköping University Electronic Press. This book was released on 2020-04-06 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This licentiate thesis aims to establish the basis for scientifically understanding and supporting the cognitive processes involved in the conceptual design of resource- efficient and effective product-service systems (PSSs). The research carried out is transdisciplinary in nature and includes both prescriptive and descriptive studies. First, the cognitive nature of conceptual PSS designing is investigated. Multiple pre-experimental protocol studies in a laboratory setting are carried out to do so. The cohort of these explorative studies includes experienced industrial practitioners conceptually designing a resource-efficient PSS. These descriptive studies provide quantitative insights into the cognitive effort expended by designers on various design issues and processes during conceptual PSS designing and its potential differences to conceptual product designing. These insights form the basis for future research that can eventually shine light on this complex process with statistically significant empirical results. Second, the essence of extant prescriptive PSS design principles, methods and tools is distilled through a literature analysis and synthesis of the state of the art. Subsequently, important aspects that need to be considered during conceptual PSS designing are consolidated in the form of a PSS design schema. Third, a design navigator named lifecycle-oriented function deployment (LFD) is developed. LFD is essentially a contextual decision-making support tool, developed to guide the conceptual designing of environmentally benign PSSs. This tool informs the designers regarding the potential environmental impacts of specific design parameters of an existing offering. It subsequently guides the designers in the redesign of this existing offering into a PSS with relatively benign environmental impacts. Fourth, the effects of the two proposed prescriptions are tested empirically. True experimental protocol studies are carried out in a laboratory setting to test the effects of the prescriptive PSS design schema on the cognition of PSS designers. LFD is applied in an industrial case study using the action design research method, to support the conceptual redesign of an existing product-centric offering into an environmentally benign PSS. Environmental impacts of the PSS concepts generated using LFD are then evaluated in comparison to that of the existing offering, using simulated lifecycle assessment. A semi-structured interview is carried out to evaluate the utility and usability of LFD, with the company personnel involved in the conceptual redesign process. This licentiate thesis is an effort to effectively design the future research work of the author. This future work will aim to support and establish generalizable scientific knowledge regarding the conceptual designing of resource-efficient and effective PSSs.
Download or read book Product Service System Design for Sustainability written by Carlo Vezzoli and published by Routledge. This book was released on 2017-09-08 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on a huge European and Asian research project, is a state-of-the-art examination of the theory and practice of system innovation through Product-Service System (PSS) design for sustainability from a trans-cultural viewpoint. PSS design incorporates innovative strategies that shift businesses away from simply designing and selling physical products to developing integrated systems of products and services that satisfy human needs. The book provides background, advice and tools for designers interested in sustainable PSSs and has a wealth of case studies for practitioners to digest.
Download or read book Introduction to Product Service System Design written by Tomohiko Sakao and published by Springer Science & Business Media. This book was released on 2009-11-27 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Introduction to Product/Service-System Design" contains a collection of practical examples demonstrating how to design a PSS in industry. These recent examples are the results of applying various theories developed in different countries and therefore accommodating diverse cultural differences. Providing a useful overall guide to the state of the art in theory and practice, each chapter covers the cutting edge of a different methodology or practice. The book’s focus on design is also evident in the discussion of how to anticipate and utilize the various dynamics within each dimension. "Introduction to Product/Service-System Design" will help improve working processes and inspire creative thinking for the wide range of people involved in designing a PSS: designers, marketing professionals, sales staff, production engineers, and service engineers. It can also serve as a reference book for university students on advanced courses.
Download or read book Effective and efficient design and provision of product service systems written by Johannes Matschewsky and published by Linköping University Electronic Press. This book was released on 2019-04-10 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world manufacturing companies operate in is changing. In the past, these companies relied on the design and sale of products. Today, this linear model of business is becoming increasingly insufficient. As customers are more and more focused on their core business, buying and operating machinery and other goods becomes unattractive to them. In response to this, manufacturing companies are expanding their value capture into additional stages of the product lifecycle by providing integrated offerings of products and services — Product-Service Systems (PSSs). Designing and providing PSSs is fundamentally different from traditional product sales. Expanding to become a PSS provider is, therefore, challenging for companies with a history of designing and selling products. Departing from this, it is the aim of this thesis to support manufacturing companies in their expansion to effective and efficient design and provision of PSSs. The research reported has both descriptive and prescriptive properties, reflecting the goals of understanding the status quo in manufacturing companies’ practice and providing support based on this. To establish a point of departure, the current design and provision of two manufacturing companies expanding their business towards PSSs was investigated. From this, an in-depth understanding of the status quo and a number of challenges emerged. Based on this, the research had the goal to contribute to identifying and developing solutions to these challenges, with an initial focus on methods supporting PSS design and provision. However, although methods fitting to the challenges identified exist, they appear to receive limited uptake in manufacturing companies’ practice. In order to improve their practical utility, a structured method is proposed to assist users in both academia and practice in developing methods in a requirements-oriented fashion. The utility of methods in improving the efficiency and effectiveness of PSS design and provision is thereby to be enhanced. A particular challenge for manufacturing companies expanding to become PSS providers is the change in how value is captured: Resulting from the extensive involvement throughout the lifecycle, a need for a broader, multidimensional understanding of value capture was identified. However, the manufacturing companies investigated have been found to experience challenges in grasping this change, with a focus on a product sales-centric understanding of value capture remaining prevalent. To support companies towards reaping the benefits of the expansion to PSS design and provision, methods to explore how value is currently created and captured in the use phase and how to enhance the future value capture based on that information in the design phase have been developed and applied. As a result, broadly relevant value dimensions were attained, aiming to facilitate a lifecycle-focused, effective, and efficient design and provision of PSSs. Eventually, to broaden the understanding of effective and efficient design and provision of PSSs in practice today, the potential contributions of real-world PSSs to a circular economy were investigated based on an existing framework. The result was ambiguous, indicating both advancements compared to traditional sales and substantial room for improvement, particularly with a focus on the absolute decoupling of economic activity and resource use. Based on the synthesis of the research results, manufacturing companies are supported in their expansion to effective and efficient design and provision of PSSs — and towards a promising future.
Download or read book The Philosopher s Stone for Sustainability written by Yoshiki Shimomura and published by Springer Science & Business Media. This book was released on 2012-09-26 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Product-Service Systems (IPS2), which is defined as “an integrated industrial product and service offering that delivers value in use,” has expanded rapidly over the last decade. IPS2 has allowed us to achieve both high added value and high productivity and has enriched our QOL by improving the performance of products and services. We are now struggling with many awkward issues related to sustainability, but IPS2 is expected to be the “philosopher’s stone” for solving these issues. Following the pattern of conferences held in Cranfield in 2009, Linköping in 2010, and Braunschweig in 2011, the fourth International CIRP Conference on Industrial Product-Service Systems, held on November 8-9, 2012, in Tokyo, will cover various aspects of IPS2. Topics planned for this year’s conference reflect the latest IPS2 information in both the natural sciences and humanities and include case studies from various industries. IPS2 is still a relatively new field, so it is important to keep track of the entire context in order to promote more cross-sectional cooperation between multimodal fields and disciplines. The fourth International CIRP Conference on Industrial Product-Service Systems will serve as a vital platform for such collaborations and the discussion of new scientific ideas.
Download or read book Sustainable Product Service Systems written by Fabrizio Ceschin and published by Springer Science & Business Media. This book was released on 2013-12-05 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the potential contribution that a strategic design approach can make to stimulating and supporting the societal embedding of sustainable PSSs (product-service systems). A new strategic design role thus emerges; a role in which the ideation and development of sustainable PSS concepts is coupled with the designing of appropriate transition paths (sequence of socio-technical experiments) to gradually incubate, introduce and diffuse these concepts. The book also outlines the new design approach and capabilities needed by strategic designers, project managers and consultants to operate at such a strategic level. On a more operational point of view, the work presents a practical “how to do” design process and associated guidelines to support practitioners in designing and managing the societal embedding process of sustainable PSS innovations.
Download or read book Customization Oriented Design of Product Service System written by Wenyan Song and published by Springer. This book was released on 2018-06-29 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the customization design of product/service system (PSS), making use of a systematic design process and a number of methods, especially Industrial Customer Activity Cycle Analysis, Service Quality Function Deployment, Service Function and Attribute Analysis, Modified Service Blueprint, Multi-Objective Optimization and Multi-Criteria Recommendation Method. The book is especially valuable in manipulating the problems of PSS requirements analysis, design conflict, design reuse and proactively response to customer. The methods in the book facilitate modular design of customized solutions and enhance PSS design efficiency. Presenting case studies, this book helps researchers and practitioners to understand the customization process and methods in the early development of PSS.
Download or read book Complex Engineering Service Systems written by Irene Ng and published by Springer Science & Business Media. This book was released on 2011-07-02 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: For manufacturers of complex engineering equipment, the focus on service and achieving outcomes for customers is the key to growth. Yet, the capability to provide service for complex engineered products is less understood. Taking a trans-disciplinary approach, Complex Engineering Service Systems covers various aspects of service in complex engineering systems, with perspectives from engineering, management, design, operations research, strategy, marketing and operations management that are relevant to different disciplines, organisation functions, and geographic locations. The focus is on the many facets of complex engineering service systems around a core integrative framework of three value transformations – that of material/equipment, information and people. Complex Engineering Service Systems is the outcome of the EPSRC/BAE Systems S4T (Service Support Solutions: Strategy and Transition) research programme of 10 universities and 27 researchers, which examined how high-value manufacturers of complex engineering products adapt to a multi-partnered environment to design and deliver value in a service system. Complex Engineering Service Systems aims to be the main source of knowledge for academics and professionals in the research and practice of contracting, managing, designing, leading, and delivering complex engineering service systems. The book takes a value-based approach to integrating equipment and human factors into a total service provision. In doing so, it aims to advance the field of service systems and engineering.
Download or read book Designing Sustainable Energy for All written by Carlo Vezzoli and published by Springer. This book was released on 2018-05-17 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book addresses the issue of diffusing sustainable energy access in low- and middle-income contexts. Access to energy is one of the greatest challenges for many people living in low- income and developing contexts, as around 1.4 billion people lack access to electricity. Distributed Renewable Energy systems (DRE) are considered a promising approach to address this challenge and provide energy access to all. However, even if promising, the implementation of DRE systems is not always straightforward. The book analyses, discusses and classifies the promising Sustainable Product-Service System (S.PSS) business models to deliver Distributed Renewable Energy systems in an effective, efficient and sustainable way. Its message is supported with cases studies and examples, discussing the economic, environmental and socioethical benefits as well as its limitations and barriers to its implementation. An innovative design approach is proposed and a set of design tools are supplied, enabling readers to create and develop Sustainable Product-Service System (S.PSS) solutions to deliver Distributed Renewable Energy systems. Practical applications of the book’s design approach and tools by companies and practitioners are discussed and the book will be of interest to readers in design, industry, governmental institutions, NGOs as well as researchers.
Download or read book Functional Thinking for Value Creation written by Jürgen Hesselbach and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: After the IPS2 conferences in Cranfield and Linköping in 2009 and 2010 the 3rd CIRP International Conference on Industrial Product Service Systems (IPS2) 2011 takes place in Braunschweig, Germany. IPS2 itself is defined as “an integrated industrial product and service offering that delivers value in use”. The customers expect comprehensive solutions, which are adapted to their individual needs. IPS2 offers the possibility to stand out from competition and for long-term customer loyalty. Particularly in times of economic crisis it becomes apparent which producing companies understand to satisfy the needs and requirements of their customers. Especially in this relatively new domain IPS2 it will be important to keep track of the whole context and to seek cooperation with other research fields and disciplines. The 3rd CIRP International Conference on Industrial Product Service Systems (IPS2) 2011 serves as a platform for such collaborations and the discussion of new scientific ideas.
Download or read book Data Driven Decision Making for Product Service Systems written by Giuditta Pezzotta and published by Springer Nature. This book was released on with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Product Lifecycle Management Leveraging Digital Twins Circular Economy and Knowledge Management for Sustainable Innovation written by Christophe Danjou and published by Springer Nature. This book was released on with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Product Service Integration for Sustainable Solutions written by Horst Meier and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: “An Industrial Product-Service System is characterized by the integrated and mutually determined planning, development, provision and use of product and service shares including its immanent software components in Business-to-Business applications and represents a knowledge-intensive socio-technical system.” – Meier, Roy, Seliger (2010) Since the first conference in 2009, the CIRP International Conference on Industrial Product-Service Systems has become a well-established international forum for the review and discussion of advances, research results and industrial improvements. Researchers from all over the world have met at previous IPS2 conferences in Cranfield (2009), Linköping (2010), Braunschweig (2011) and Tokyo (2012). In 2013, the 5th CIRP International Conference on Industrial Product-Service Systems is held in Bochum. Important topics of IPS2 research presented at the conference are: planning and development, sustainability, business models, operation, service engineering, knowledge management, ICT, modeling and simulation, marketing and economic aspects as well as the role of the human in IPS2.
Download or read book Sustainability Through Innovation in Product Life Cycle Design written by Mitsutaka Matsumoto and published by Springer. This book was released on 2016-09-19 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of chapters based on selected papers presented at the EcoDesign2015 symposium (9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing). The symposium, taking place in Tokyo in December 2015, has been leading the research and practices of eco-design of products and product-related services since it was first held in 1999. The proceedings of EcoDesign2011 were also published by Springer. Eco-design of products and product-related services (or product life cycle design) are indispensable to realize the circular economy and to increase resource efficiencies of our society. This book covers the state of the art of the research and the practices in eco-design, which are necessary in both developed and developing countries. The chapters of the book, all of which were peer-reviewed, have been contributed by authors from around the world, especially from East Asia, Europe, and Southeast Asia. The features of the book include (1) coverage of the latest topics in the field, e.g., global eco-design management, data usage in eco-design, and social perspectives in eco-design; (2) an increased number of authors from Southeast Asian countries, with a greater emphasis on eco-design in emerging economies; (3) high-quality manuscripts, with the number of chapters less than half of that of the previous book.
Download or read book Systems Engineering in Research and Industrial Practice written by Josip Stjepandić and published by Springer Nature. This book was released on 2019-10-31 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the foundations, new developments and methods, applications, and current challenges of systems engineering (SE). It provides key insights into SE as a concept and as an approach based on the holistic view on the entire lifecycle (requirements, design, production, and exploitation) of complex engineering systems, such as spacecraft, aircraft, power plants, and ships. Written by leading international experts, the book describes the achievements of the holistic, transdisciplinary approach of SE as state of the art both in research and practice using case study examples from originating at universities and companies such as Airbus, BAE Systems, BMW, Boeing, and COMAC. The reader obtains a comprehensive insight into the still existing challenges of the concept of SE today and the various forms in which SE is applied in a variety of areas.
Download or read book 5th International Conference on Digital Enterprise Technology written by Alain Bernard and published by Editions Publibook. This book was released on 2010 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Enterprise Technology (DET) is more than a concept. Companies arc facing new challenges in a context where the references are mostly numerical. Nowadays, digital methods and tools arc widely generalized. DET 2008 allowed excellent exchanges about "the collection of systems and methods for the digital modelling and analysis of the global product development and realisation process, in the context of lifecycle management". This book of proceedings gives a short vices of the keynotes and proposes the text of the papers that have been presented during DET 2008. This gives a clear view of the actual state of the art and of the industrial needs. This book of proceedings is organized with respect to the topics that were addressed during the conference.
Download or read book The 10th International Conference on Engineering Project and Production Management written by Kriengsak Panuwatwanich and published by Springer Nature. This book was released on 2020-03-03 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the EPPM 2019 conference, and highlights innovative work by researchers and practitioners active in various industries around the globe. Recent advances in science and technology have made it possible to seamlessly connect and integrate various elements of engineering systems, and opened the door for innovations that have transformed how we live and work. While these developments have yielded enhanced efficiency and numerous improvements in our current practices, the problems caused by the increased complexity of these integrated systems can be extremely difficult. Accordingly, solving these problems involves applying cross-disciplinary expertise to address the heterogeneity of the various elements inherent in the system. These proceedings address four main themes: (I) Smart and Sustainable Construction, (II) Advances in Project Management Practices, (III) Toward Safety and Productivity Improvement, and (IV) Smart Manufacturing, Design, and Logistics. As such, they will be of interest to and valuable to researchers and practitioners in a range of industries seeking an update on the translational fields of engineering, project, and production management.