Download or read book Unconventional Techniques for the Production of Light Alloys and Composites written by Jose Martin Herrera Ramirez and published by Springer Nature. This book was released on 2020-06-22 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses methods used in the synthesis of light alloys and composites for industrial applications. It begins with a broad introduction to virtually all aspects of the technology of light alloys and composite materials for aircraft and aerospace applications. The basic theory of fiber and particle reinforcements; light metallic material characteristics and composite systems; components forms, and manufacturing techniques and processes are discussed. The book then progresses to describe the production of alloys and composites by unconventional techniques, such as powder metallurgy, sandwich technique, severe plastic deformation, additive manufacturing, and thermal spray, making it appropriate for researchers in both academia and industry. It will be of special interest to aerospace engineers. Provides a broad introduction to the technology used in manufacturing light alloys and composite materials; Describes the current technologies employed in synthesizing light alloys made from advanced materials; Focuses on unconventional techniques used to produce light alloys and composites in aerospace applications.
Download or read book German Technique in the Production of Light Alloys written by P. M. Haenni and published by . This book was released on 194? with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designing Small Weapons written by Jose Herrera-Ramirez and published by CRC Press. This book was released on 2022-06-09 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the tools necessary for development of weapons in recent history Provides clear instruction on using computer design tools and the capabilities of modern software in designing light weapons Covers the life cycle of light weapons, from design to production of weapon parts to heat treatments Explains the cutting edge technologies employed in the development of light weapons, both during the design process and also in the manufacturing process Applies interdisciplinary methods from science and engineering to the development of light weapons
Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance Explores the manufacturing process for light alloys including metal forming processes for automotive applications
Download or read book Powder Metallurgy written by Leszek A. Dobrzański and published by BoD – Books on Demand. This book was released on 2017-03-29 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the fundamentals and the role of powder metallurgy in contemporary technologies and the state of the art of classical powder metallurgy technologies and a general description of new variants and special and hybrid technologies used in powder metallurgy. The next part includes over a dozen case studies provided in the following chapters, comprehensively describing authors' accomplishments of numerous teams from different countries across the world in advanced research areas relating to powder metallurgy and to special and hybrid technologies. The detailed information, largely deriving from own and original research and R
Download or read book Sustainable Engineering Products and Manufacturing Technologies written by Kaushik Kumar and published by Academic Press. This book was released on 2019-05-17 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Engineering Products and Manufacturing Technologies provides the reader with a detailed look at the latest research into technologies that reduce the environmental impacts of manufacturing. All points where engineering decisions can influence the environmental sustainability of a product are examined, including the sourcing of non-toxic, sustainable raw materials, how to choose manufacturing processes that use energy responsibly and minimize waste, and how to design products to maximize reusability and recyclability. The subject of environmental regulation is also addressed, with references to both the US and EU and the future direction of legislation. Finally, sustainability factors are investigated alongside other product considerations, such as quality, price, manufacturability and functionality, to help readers design processes and products that are economically viable and environmentally friendly. Helps readers integrate product sustainability alongside functionality, manufacturability and cost Describes the latest technologies for energy efficient and low carbon manufacturing Discusses relevant environmental regulations around the globe and speculates on future directions
Download or read book Bibliography of Scientific and Industrial Reports written by and published by . This book was released on 1946 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Aluminium Composites and Alloys written by Leszek A. Dobrzański and published by BoD – Books on Demand. This book was released on 2021-10-06 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an engineering material of strategic importance in the current stage of Industry 4.0. This book discusses advanced composites based on aluminium alloys. It also describes pressure infiltration of gas with liquid aluminium, the mechanical synthesis of aluminium alloy powder and halloysite nanotubes (HNTs) or multi-wall carbon nanotubes (MWCNTs) consolidated by plastic deformation, selected optimization and prediction models, casting aluminium alloys containing zirconium, aluminium alloys subjected to high-speed extrusion of shapes, corrosion resistance of alloys containing lithium, machining conditions of alloys with copper and zinc additions, and more.
Download or read book A TEXTBOOK OF ENGINEERING CHEMISTRY written by SYAMALA SUNDAR DARA and published by S. Chand Publishing. This book was released on 2008 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any good text book,particularly that in the fast changing fields such as engineering & technology,is not only expected to cater to the current curricular requirments of various institutions but also should provied a glimplse towards the latest developments in the concerned subject and the relevant disciplines.It should guide the periodic review and updating of the curriculum.
Download or read book Metallic Amorphous Alloy Reinforcements in Light Metal Matrices written by S. Jayalakshmi and published by Springer. This book was released on 2015-02-24 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge research on the design and development of novel, advanced high-strength, light-weight materials via the incorporation of novel reinforcements, namely, metallic amorphous alloys/bulk metallic glasses (BMG), in light metal matrix composites (LMMCs) based on Al and Mg. The book begins with an introduction to conventional ceramic reinforced light metal matrix composites, along with the major drawbacks which limit their application. Metallic amorphous alloys/Bulk Metallic Glasses (BMG) are new class of metallic materials that are distinctly differently from conventional metals/alloys in terms of their structure and thermal behavior, and exhibit extremely high strength (1 to 2 GPa) and large elastic strain limit (1 to 2%). Given these unique properties, upon their incorporation into Al/Mg-matrices, they provide superior interfacial properties, i.e. high degree of compatibility with the matrix due to their metallic nature when compared to conventional ceramic reinforcements, and thereby significantly enhance the mechanical performance of LMMCs. Amorphous/BMG reinforced LMMCs is an emerging research field and the existing literature is meager. This book discusses the various processing methods that would be suitable for these novel materials. A comparison of mechanical properties and strengthening mechanisms of amorphous/BMG reinforced composites with those of conventional ceramic composites is presented. Future research directions and wider research potential of the novel materials are discussed, and prospective applications are highlighted. For ease of understanding and comparison, appropriate schematics, tables, and figures are provided.
Download or read book Surface Engineering of Light Alloys written by Hanshan Dong and published by Elsevier. This book was released on 2010-05-24 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of light alloys in industries such as aerospace, sports equipment and biomedical devices is driving research into surface engineering technologies to enhance their properties for the desired end use. Surface engineering of light alloys: Aluminium, magnesium and titanium alloys provides a comprehensive review of the latest technologies for modifying the surfaces of light alloys to improve their corrosion, wear and tribological properties. Part one discusses surface degradation of light alloys with chapters on corrosion behaviour of magnesium alloys and protection techniques, wear properties of aluminium-based alloys and tribological behaviour of titanium alloys. Part two reviews surface engineering technologies for light alloys including anodising, plasma electrolytic oxidation, thermal spraying, cold spraying, physical vapour deposition, plasma assisted surface treatment, PIII/PSII treatments, laser surface modification, ceramic conversion and duplex treatments. Part three covers applications for surface engineered light alloys including sports equipment, biomedical devices and plasma electrolytic oxidation and anodised aluminium alloys for spacecraft applications. With its distinguished editor and international team of contributors, Surface engineering of light alloys: Aluminium, magnesium and titanium alloys is a standard reference for engineers, metallurgists and materials scientists looking for a comprehensive source of information on surface engineering of aluminium, magnesium and titanium alloys. Discusses surface degradation of light alloys considering corrosion behaviour and wear and tribological properties Examines surface engineering technologies and modification featuring plasma electrolytic oxidation treatments and both thermal and cold spraying Reviews applications for engineered light alloys in sports equipment, biomedical devices and spacecraft
Download or read book Advanced Materials in Japan written by COMLINE International COMLINE International Corp. and published by Elsevier. This book was released on 2013-10-22 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Please note this is a Short Discount publication. Advanced Materials in Japan: Source Book 1992 offers the reader news of all the developments which have taken place over the last year. The Source Book is divided into chapters based on the divisions of news in New Materials in Japan – Metals & Alloys; Ceramics; Composites; Electronic & Optoelectronic Materials; Magnetic Materials; Plastics; Materials & The Environment; Medical Materials and Textiles, each introduced by an expert in these particular areas and discussing the implications of the information to non–Japanese industry. In addition, the Source Book includes a chapter devoted to business/market information – company mergers acquisitions etc., together with an overview of the Japanese approach to advanced materials and highlighting all major research initiatives, research programmes etc.
Download or read book Metal Matrix Composites written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the properties of MMCs can be directly designed "into" the material, they can fulfill all the demands set by design engineers. This book surveys the latest results and development possibilities for MMCs as engineering and functional materials, making it of utmost value to all materials scientists and engineers seeking in-depth background information on the potentials these materials have to offer in research, development and design engineering.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clean Production written by K.B. Misra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world has witnessed several revolutions since the dawn of industrial revolution some two centuries ago. During the current century itself, three revolutions in the area of communication, information processing and quality have taken place and each time the standard of living of man improved beyond predictions. But during the same period, the world population has also phenomenally increased dwarfing the gains achieved from the development. Increased level of industrial activity to meet the of humanity has caused irreversible damage to the pristine environment that the demand Earth once had. Economic disparity between the haves and havenots has widened, aggravating the situation further more. Ozone layer depletion, warming up of Earth's atmosphere and the pollution created by uncontrolled industrial activity to gain economic strength are now assuming the proportion of a catastrophe that may eventually threaten the survival of life on Earth. Developed countries blame the Third World countries for the uncontrolled emissions through burning of fossil fuels and for wasting precious resources of energy by using inefficient and uneconomical technologies, while the developed countries are equally responsible for avoidable oV,er-consumption and for the wastage of resources and energy and for not sharing the improved and efficient technologies with the developing countries. Thus the wastage by both these set of countries continues unabated. After all, resources of the world are finite and are meant to be shared by all its inhabitants.
Download or read book Concise Encyclopedia of Composite Materials written by A. Kelly and published by Elsevier. This book was released on 2012-12-02 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Concise Encyclopedia of Composite Materials, first published as a hardbound edition in 1989, has been updated and revised and is now available as a paperback for individual researchers requiring a fundamental reference source for this dynamic field. Since 1989, research involving composite materials has advanced rapidly and this revised edition reflects those changes with the addition of new articles, including recent work on nanocomposites, smart composite materials systems, and metallic multilayers. The 67 articles included in this revised edition are presented in alphabetical order and each provides an introduction to one aspect of composite materials. Every article is extensively cross-referenced and includes a full bibliography. The volume contains over 250 photographs, drawings and tables as well as exhaustive subject and author indexes. The comprehensive breadth of coverage of the field of composite materials makes this volume an invaluable source of reference for materials scientists and mechanical engineers involved in industrial and academic research into the fabrication, properties and applications of composite materials.
Download or read book Advanced Aluminium and Magnesium Alloys written by Tasadduq Khan and published by . This book was released on 1990 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: