Download or read book Ultrasonic Nondestructive Testing of Inhomogeneous Isotropic and Anisotropic Media Modeling and Imaging written by Chinta, Prashanth Kumar and published by kassel university press GmbH. This book was released on 2013-01-01 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis discusses ultrasonic testing by means of numerical modeling and image reconstruction techniques using elastic and acoustic wave fields. Numerical modeling of elastic waves (part one of the thesis) is used to understand the elastic wave scattering due to material defects and the propagation of surface waves in inhomogeneous isotropic and anisotropic media, with special emphasis on transversely isotropic and orthotropic media. Different imaging techniques (part two of the thesis) are investigated to develop a software, implemented in Matlab, which can give imaging results immediately after the measurement almost in real time as it can read and process the data obtained directly from the measurement. Acoustic wave scattering using analytical techniques and imaging techniques based on Radon transform are investigated. The data obtained from the Radon transform are subjected for imaging utilizing the filtered back projection algorithm and the Fourier slice theorem. The fundamentals of elastic wave propagation in solids are extensively elaborated. The point source synthesis to compute the Green’s functions for anisotropic media and the plane wave synthesis to compute slowness, phase and group velocity surfaces are studied. The elastic integral equations for the so called stretched coordinate system are derived. Based on these equations the numerical tool ’Three-dimensional Elastodynamic Finite Integration Technique’ (3D-EFIT) has been enhanced to treat not only isotropic media but also anisotropic media. For fast computation, the 3D-EFIT code using the Message Passing Interface (MPI) is used by which processing on massive parallel computers is made possible. In 3D-EFIT the Convolutional Perfectly Matched Layers (CPML) can also be applied to absorb the elastic body waves as well as the surface and evanescent waves. 3D-EFIT for homogeneous anisotropic media is validated by comparing computed Green’s functions with an analytical solution. After the validation, the applications of EFIT such as elastic wave modeling in inhomogeneous austenitic steel welds and inhomogeneous orthotropic wooden structures are presented. The results of the 2D-EFIT and 3D-EFIT modeling are compared against measurements performed at Federal Institute for Materials Research and Testing (BAM). After the modeling part of the thesis, inverse scattering techniques for fast imaging of inhomogeneities are studied. For three-dimensional imaging of defects in concrete, the Synthetic Aperture and Focusing Technique (SAFT) and Fourier Transformed Synthetic aperture Focusing Technique (FT-SAFT) are applied to data measured using a transducer array. The seismic Dip-Moveout (DMO) method has been utilized to convert measured bistatic data into monostatic data. A special treatment of SAFT as a technique for back propagation of the wave fields using time reversal, utilizing the knowledge of the geometry, is presented. Finally, time domain anisotropic SAFT (AnSAFT) is studied for image reconstruction of defects in inhomogeneous geometry with orthotropic crystal structure of the embedding medium.
Download or read book Acoustical Imaging written by L. Masotti and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 131 of the papers presented at the 22nd International Symposium on Acoustical Imaging. This meeting, which was held for the first time in Florence, Italy, on September 3-6, 1995, allowed an intense and friendly exchange of ideas between over 150 researchers from 26 different countries of Europe (70%), America (20%), Asia and Australia (10%). The Symposium started on Sunday, September 3, with the opening Session held in the magnificent 'Salone dei 500' in Palazzo Vecchio; this included invited talks by Peter WeHs and Hua Lee, who reviewed the State of the Art in Acoustical Imaging research. One hundred and forty papers, selected from the nearly 200 submitted Abstracts, were presented in 11 non-parallel oral Sessions and one Poster Session. This year a 'Best Poster' award was introduced, which was won by V. Miette, M. Fink and F. Wu. Also, a special session on Acoustical Microscopy was organized by Walter Arnold, in which invited speakers Ioie Iones, Oleg Kolosov, Andrew Briggs and Ute Rabe reviewed the capabilities of this em erging topic.
Download or read book Structural Health Monitoring 2013 A Roadmap to Intelligent Structures written by Fu-Kuo Chang and published by DEStech Publications, Inc. This book was released on 2013-09-26 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Original research on SHM sensors, quantification strategies, system integration and control for a wide range of engineered materials New applications in robotics, machinery, as well as military aircraft, railroads, highways, bridges, pipelines, stadiums, tunnels, space exploration and energy production Continuing a critical book series on structural health monitoring (SHM), this two-volume set (with full-text searchable CD-ROM) offers, as its subtitle implies, a guide to greater integration and control of SHM systems. Specifically, the volumes contain new research that will enable readers to more efficiently link sensor detection, diagnostics/quantification, overall system functionality, and automated, e.g., robotic, control, thus further closing the loop from inherent signal-based damage detection to responsive real-time maintenance and repair. SHM performance is demonstrated in monitoring the behavior of composites, metals, concrete, polymers and selected nanomaterials in a wide array of surroundings, including harsh environments, under extreme (e.g., seismic) loading and in space. New information on smart sensors and network optimization is enhanced by novel statistical and model-based methods for signal processing and data quantification. A special feature of the book is its explanation of emerging control technologies. Research in these volumes was initially presented in September 2013 at the 9th International Workshop on Structural Health Monitoring (IWSHM), held at Stanford University and sponsored by the Air Force Office of Scientific Research, the Army Research Laboratory, and the Office of Naval Research.
Download or read book Review of Radio Science written by W. Ross Stone and published by John Wiley & Sons. This book was released on 2002-08-12 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: A triennial summation of the state of the art in radio science This book is the fourth in the modern series of triennial reviews prepared by the International Union of Radio Science to further communication and understanding of the status and future of radio science, both for those working in the field, and for those who want to know what is of current importance in this area. The International Union of Radio Science, URSI (Union Radio-Scientifique Internationale), has divided the subject of "Radio Science" according to the ten topics of the Scientific Commissions that make up URSI. This volume consists of thirty-eight original, peer-reviewed papers. Each paper provides a critical, in-depth review of–and, in many cases, tutorial on–advances and research that have been of significant importance within the area of interest of the Commissions during the past three to four years. Among the topics covered are: Electromagnetic metrology Fields and waves Signals and systems Electronics and photonics Electromagnetic noise and interference Wave propagation and remote sensing Ionospheric radio and propagation Waves in plasmas Radio astronomy Electromagnetics in biology and medicine With an included CD-ROM of the full book text, allowing the user to do full-text searching of all the papers, the Review of Radio Science: 1999—2002 is a resource of vital importance to anyone working in, or with an interest in, radio science.
Download or read book Scattering Two Volume Set written by E. R. Pike and published by Academic Press. This book was released on 2002 with total page 985 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part 1: SCATTERING OF WAVES BY MACROSCOPIC TARGET -- Interdisciplinary aspects of wave scattering -- Acoustic scattering -- Acoustic scattering: approximate methods -- Electromagnetic wave scattering: theory -- Electromagnetic wave scattering: approximate and numerical methods -- Electromagnetic wave scattering: applications -- Elastodynamic wave scattering: theory -- Elastodynamic wave scattering: Applications -- Scattering in Oceans -- Part 2: SCATTERING IN MICROSCOPIC PHYSICS AND CHEMICAL PHYSICS -- Introduction to direct potential scattering -- Introduction to Inverse Potential Scattering -- Visible and Near-visible Light Scattering -- Practical Aspects of Visible and Near-visible Light Scattering -- Nonlinear Light Scattering -- Atomic and Molecular Scattering: Introduction to Scattering in Chemical -- X-ray Scattering -- Neutron Scattering -- Electron Diffraction and Scattering -- Part 3: SCATTERING IN NUCLEAR PHYSICS -- Nuclear Physics -- Part 4: PARTICLE SCATTERING -- State of the Art of Peturbative Methods -- Scattering Through Electro-weak Interactions (the Fermi Scale) -- Scattering Through Strong Interactions (the Hadronic or QCD Scale) -- Part 5: SCATTERING AT EXTREME PHYSICAL SCALES -- Scattering at Extreme Physical Scales -- Part 6: SCATTERING IN MATHEMATICS AND NON-PHYSICAL SCIENCES -- Relations with Other Mathematical Theories -- Inverse Scattering Transform and Non-linear Partial Differenttial Equations -- Scattering of Mathematical Objects.
Download or read book Ultrasonic Wave Propagation in Non Homogeneous Media written by Alain Leger and published by Springer Science & Business Media. This book was released on 2009-01-30 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non Destructive Testing and Non Destructive Evaluation using Ultrasounds covers an important field of applications and requires a wide range of fundamental theoretical, numerical and experimental investigations. In the present volume, the reader will find some relevant research results on wave propagation in complex materials and structures which are concerned with today’s problems on composites, bonding, guided waves, contact or damage, imaging and structural noise. The fifth meeting of the Anglo-French Research Group on "Wave propagation in non homogeneous media with a view to Non Destructive testing" was held in Anglet, France, June 2-6, 2008.
Download or read book The Development of a 2D Ultrasonic Array Inspection for Single Crystal Turbine Blades written by Christopher Lane and published by Springer Science & Business Media. This book was released on 2013-10-30 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes the development of a new technique to solve an important industrial inspection requirement for a high-value jet-engine component. The work – and the story told in the thesis – stretches all the way from the fundamentals of wave propagation in anisotropic material and ultrasonic array imaging through to device production and site trials. The book includes a description of a new method to determine crystallographic orientation from 2D ultrasonic array data. Another new method is described that enables volumetric images of an anisotropic material to be generated from 2D ultrasonic array data, based on measured crystallographic orientation. After extensive modeling, a suitable 2D array and deployment fixtures were manufactured and tested on in situ turbine blades in real engines. The final site trial indicated an order of magnitude improvement over the best existing technique in the detectability of a certain type of root cracking. The Development of a 2D Ultrasonic Array Inspection for Single Crystal Turbine Blades should be an inspiration for those starting out on doctoral degrees as it shows the complete development cycle from basic science to industrial usage.
Download or read book Nondestructive Testing of Materials and Structures written by Oral Büyüköztürk and published by Springer Science & Business Media. This book was released on 2012-09-09 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition assessment and characterization of materials and structures by means of nondestructive testing (NDT) methods is a priority need around the world to meet the challenges associated with the durability, maintenance, rehabilitation, retrofitting, renewal and health monitoring of new and existing infrastructures including historic monuments. Numerous NDT methods that make use of certain components of the electromagnetic and acoustic spectrum are currently in use to this effect with various levels of success and there is an intensive worldwide research effort aimed at improving the existing methods and developing new ones. The knowledge and information compiled in this book captures the current state of the art in NDT methods and their application to civil and other engineering materials and structures. Critical reviews and advanced interdisciplinary discussions by world-renowned researchers point to the capabilities and limitations of the currently used NDT methods and shed light on current and future research directions to overcome the challenges in their development and practical use. In this respect, the contents of this book will equally benefit practicing engineers and researchers who take part in characterization, assessment and health monitoring of materials and structures.
Download or read book Computational Nondestructive Evaluation Handbook written by Sourav Banerjee and published by CRC Press. This book was released on 2020-06-01 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing computational wave propagation methods developed over 40 years of research, this comprehensive book offers a computational approach to NDE of isotropic, anisotropic, and functionally graded materials. It discusses recent methods to enable enhanced computational efficiency for anisotropic materials. It offers an overview of the need for and uses of NDE simulation. The content provides a basic understanding of ultrasonic wave propagation through continuum mechanics and detailed discussions on the mathematical techniques of six computational methods to simulate NDE experiments. In this book, the pros and cons of each individual method are discussed and guidelines for selecting specific simulation methods for specific NDE scenarios are offered. Covers ultrasonic CNDE fundamentals to provide understanding of NDE simulation methods Offers a catalog of effective CNDE methods to evaluate and compare Provides exercises on real-life NDE problems with mathematical steps Discusses CNDE for common material types, including isotropic, anisotropic, and functionally graded materials Presents readers with practical knowledge on ultrasonic CNDE methods This work is an invaluable resource for researchers, advanced students, and industry professionals across materials, mechanical, civil, and aerospace engineering, and anyone seeking to enhance their understanding of computational approaches for advanced material evaluation methods.
Download or read book Ultrasonic Nondestructive Testing of Materials written by Karl-Jörg Langenberg and published by CRC Press. This book was released on 2012-02-22 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features a comprehensive discussion of the mathematical foundations of ultrasonic nondestructive testing of materials. The authors include a brief description of the theory of acoustic and electromagnetic fields to underline the similarities and differences with respect to elastodynamics. They also cover vector, elastic plane, and Rayleigh surface waves as well as ultrasonic beams, inverse scattering, and ultrasonic nondestructive imaging. A coordinate-free notation system is used that is easier to understand and navigate than standard index notation.
Download or read book Materials Evaluation written by and published by . This book was released on 2000 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative and up-to-date series provides a comprehensive review of the latest research results in quantitative nondestructive evaluation (NDE). Leading investigators working in government agencies, major industries, and universities present a broad spectrum of work extending from basic research to early engineering applications.
Download or read book Proceedings of the 25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society written by IEEE Engineering in Medicine and Biology Society. Conference and published by . This book was released on 2003 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Imaging of Complex Media with Acoustic and Seismic Waves written by Mathias Fink and published by Springer Science & Business Media. This book was released on 2003-07-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this interdisciplinary book, leading experts in underwater acoustics, seismology, acoustic medical imaging and non-destructive testing present basic concepts as well as the recent advances in imaging. The different subjects tackled show significant similarities.
Download or read book The Journal of the Acoustical Society of America written by Acoustical Society of America and published by . This book was released on 2005 with total page 1384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The interaction of complex harmonic elastic waves with periodically corrugated surfaces and with anisotropic viscoelastic and or piezoelectric layered media written by Nico F. Declercq and published by Nico F. Declercq. This book was released on 2005-05-12 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unabridged Ph.D. Thesis with thesis defense photos and presentation at the end.
