Download or read book Ultrafine Grained Materials II written by Yuntian Theodore Zhu and published by John Wiley & Sons. This book was released on 2013-09-25 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) and held during the 2002 TMS Annual Meeting in Seattle, Washington February 17-21,2002.
Download or read book Ultra Fine Grained Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2009-04-08 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses results of the New Generation Iron and Steel Materials research project funded over the last ten years. It thoroughly describes theoretical achievements in ultra-fine grain steel and its refinement. It also discusses progress in related areas of engineering and technology. The author has been engaged in the research of new generation structural materials for the last twelve years being Chief Scientist of three national research programs in China.
Download or read book Advanced Materials written by Ajit Behera and published by Springer Nature. This book was released on 2021-11-21 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the essential topics in modern materials science. It brings together the spectrum of materials science topics, spanning inorganic and organic materials, nanomaterials, biomaterials, and alloys within a single cohesive and comprehensive resource. Synthesis and processing techniques, structural and crystallographic configurations, properties, classifications, process mechanisms, applications, and related numerical problems are discussed in each chapter. End-of-chapter summaries and problems are included to deepen and reinforce the reader's comprehension. Provides a cohesive and comprehensive reference on a wide range of materials and processes in modern materials science; Presents material in an engaging manner to encourage innovative practices and perspectives; Includes chapter summaries and problems at the end of every chapter for reinforcement of concepts.
Download or read book Ultrafine Grained Materials written by Ruslan Z. Valiev and published by Springer Nature. This book was released on with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanostructured Materials by High Pressure Severe Plastic Deformation written by Yuntian T. Zhu and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.
Download or read book Severe Plastic Deformation Techniques written by Marcello Cabibbo and published by BoD – Books on Demand. This book was released on 2017-08-09 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain size is recognized as a key microstructural factor affecting mechanical and, to some extent, physical properties of metals and metallic materials. For this reason, all the means designed to control and modify the grain size are considered a proper way to design and tailor metallic materials with desired properties. In this sense, microstructure refinement through severe plastic deformation (SPD) techniques can be considered a key method for this purpose. A typical SPD process is currently defined as any method of metal forming under extensive hydrostatic pressure intended to impose a very high strain on a bulk solid without involving any significant change in the overall dimensions and having the ability to produce exceptional grain refinement. What makes SPD processing techniques so popular and attractive is the possibility of using them to enhance the strength behavior of conventional metallic materials by a factor of up to eight for pure metals such as copper and by some 30-50% for alloys. Despite the impressive property improvement achievable with SPD techniques, their uptake by industry has been rather sluggish. This book intends to give a panorama of the typical SPD techniques intended to optimize the mechanical and physical properties of metals through a significant grain size reduction process. Modeling for this purpose is also presented.
Download or read book Microstructure and Texture in Steels written by Arunansu Haldar and published by Springer Science & Business Media. This book was released on 2009-09-03 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure and Texture in Steels and Other Materials comprises a collection of articles pertaining to experimental and theoretical aspects of the evolution of crystallographic texture and microstructure during processing of steels and some other materials. Among the topics covered is the processing-microstructure-texture-property relationship in various kinds of steels, including the latest grade. Special emphasis has been given to introduce recent advances in the characterization of texture and microstructure, as well as modeling. The papers included are written by well-known experts from academia and industrial R and D, which will provide the reader with state-of-the-art, in-depth knowledge of the subject. With these attributes, Microstructure and Texture in Steels and Other Materials is expected to serve the cause of creating awareness of current developments in microstructural science and materials engineering among academic and R and D personnel working in the field.
Download or read book Severe Plastic Deformation written by Ghader Faraji and published by Elsevier. This book was released on 2018-07-14 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Severe Plastic Deformation: Methods, Processing and Properties examines all severe plastic deformation techniques developed over the past two decades, exploring the appropriate severe plastic deformation method for a particular case. The book offers an overview of these methods, introduces ultrafine-grained and nano-grained metals and methods for various bulk, sheet, tubular and large size samples, reviews effective parameters to make a severe plastic deformation method better, from property (mechanical) and processing (cost, time, load, etc.) viewpoints, discusses mechanical, physical and chemical properties of UFG and NS metals, and concludes with various applications for these methods. Over the last several decades, a large number of severe plastic deformation methods have been developed for processing a wide array of metals for superior properties, making this a timely resource. - Collects all severe plastic deformation methods in a unique reference - Compares severe plastic deformation methods from several viewpoints, including processing and final property - Classifies severe plastic deformation methods based on the sample shape and mechanics, as well as the properties achieved in the processed metal - Introduces ultrafine-grained and nano-grained metals and methods for various bulk, sheet, tubular and large size samples
Download or read book Investigations and Applications of Severe Plastic Deformation written by Terry C. Lowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material processing techniques that employ severe plastic deformation have evolved over the past decade, producing metals, alloys and composites having extraordinary properties. Variants of SPD methods are now capable of creating monolithic materials with submicron and nanocrystalline grain sizes. The resulting novel properties of these materials has led to a growing scientific and commercial interest in them. They offer the promise of bulk nanocrystalline materials for structural; applications, including nanocomposites of lightweight alloys with unprecedented strength. These materials may also enable the use of alternative metal shaping processes, such as high strain rate superplastic forming. Prospective applications for medical, automotive, aerospace and other industries are already under development.
Download or read book Bulk Nanostructured Materials written by Ruslan Z. Valiev and published by John Wiley & Sons. This book was released on 2013-09-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent results in the area of bulk nanostructured materials and new trends in their severe plastic deformation (SPD) processing, where these techniques are now emerging from the domain of laboratory-scale research into the commercial production of various bulk nanomaterials. Special emphasis is placed on an analysis of the effect of nanostructures in materials fabricated by SPD on mechanical properties (strength and ductility, fatigue strength and life, superplasticity) and functional behavior (shape memory effects, magnetic and electric properties), as well as the numerous examples of their innovative applications. There is a high innovation potential for industrial applications of bulk nanomaterials for structural use (materials with extreme strength) as well as for functional applications such as nanomagnets, materials for hydrogen storage, thermoelectric materials, superconductors, catalysts, and biomedical implants.
Download or read book Ultrafine Grained Metals written by Heinz Werner Höppel and published by MDPI. This book was released on 2018-07-02 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Ultrafine-grained Metals" that was published in Metals
Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Elsevier. This book was released on 2010-11-25 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an important metal in manufacturing, due to its versatile properties and the many applications of both the processed metal and its alloys in different industries. Fundamentals of aluminium metallurgy provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries.Part one discusses different methods of producing and casting aluminium, covering areas such as casting of alloys, quality issues and specific production methods such as high-pressure diecasting. The metallurgical properties of aluminium and its alloys are reviewed in Part two, with chapters on such topics as hardening, precipitation processes and solute partitioning and clustering, as well as properties such as fracture resistance. Finally, Part three includes chapters on joining, laser sintering and other methods of processing aluminium, and its applications in particular areas of industry such as aerospace.With its distinguished editor and team of expert contributors, Fundamentals of aluminium metallurgy is a standard reference for researchers in metallurgy, as well as all those involved in the manufacture and use of aluminium products. - Provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries - Considers many issues of central importance in aluminium production and utilization considering quality issues and design for fatigue growth resistance - Metallurgical properties of aluminium and its alloys are further explored with particular reference to work hardening and applications of industrial alloys
Download or read book Nanomaterials by Severe Plastic Deformation written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the "Second International Conference on Nanomaterials by Severe Plastic Deformation" review the enormous scientific avalanche that has been developing in the field over recent years. A valuable resource for any scientist and engineer working in this emerging field of nanotechnology.
Download or read book Ultrafine Grained Metals written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Ultrafine-grained metallic materials produced by severe plastic deformation methods are at the cutting edge of modern materials science. UFG-metals exhibit outstanding properties which make them very interesting for structural or functional engineering applications. Fifteen articles in this special issue address a broad variety of topics: New developments in severe plastic deformation techniques, advances in modeling and simulation of the severe plastic deformation processes, mechanical properties under monotonic and cyclic loading of homogenous and graded UFG structures, dominating deformation mechanisms in UFG materials, advances and strategies for high conductivity UFG-materials, correlation between severe plastic deformation parameters and resulting materials properties and peculiarities in the corrosion behavior of UFG materials. The book covers latest results on ultrafine-grained titanium, aluminum and copper alloys and on UFG iron and steels and thus provides a deep insight to current research activities in the field of ultrafine-grained metals.
Download or read book Architectured Materials in Nature and Engineering written by Yuri Estrin and published by Springer. This book was released on 2019-03-27 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with a group of architectured materials. These are hybrid materials in which the constituents (even strongly dissimilar ones) are combined in a given topology and geometry to provide otherwise conflicting properties. The hybridization presented in the book occurs at various levels - from the molecular to the macroscopic (say, sub-centimeter) ones. This monograph represents a collection of programmatic chapters, defining archimats and summarizing the results obtained by using the geometry-inspired materials design. The area of architectured or geometry-inspired materials has reached a certain level of maturity and visibility for a comprehensive presentation in book form. It is written by a group of authors who are active researchers working on various aspects of architectured materials. Through its 14 chapters, the book provides definitions and descriptions of the archetypes of architectured materials and addresses the various techniques in which they can be designed, optimized, and manufactured. It covers a broad realm of archimats, from the ones occurring in nature to those that have been engineered, and discusses a range of their possible applications. The book provides inspiring and scientifically profound, yet entertaining, reading for the materials science community and beyond.
Download or read book Heterostructured Materials written by Xiaolei Wu and published by CRC Press. This book was released on 2021-11-24 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterostructured (HS) materials represent an emerging class of materials that are expected to become a major research field for the communities of materials, mechanics, and physics in the next couple of decades. One of the biggest advantages of HS materials is that they can be produced by large-scale industrial facilities and technologies and therefore can be commercialized without the scaling up and high-cost barriers that are often encountered by other advanced materials. This book collects recent papers on the progress in the field of HS materials, especially their fundamental physics. The papers are arranged in a sequence of chapters that will help new researchers entering the field to have a quick and comprehensive understanding of HS materials, including the fundamentals and recent progress in their processing, characterization, and properties.
Download or read book Superplasticity and Grain Boundaries in Ultrafine Grained Materials written by Alexander P. Zhilyaev and published by Academic Press. This book was released on 2020-11-21 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity and Grain Boundaries in Ultrafine-Grained Materials, Second Edition, provides cutting-edge modeling solutions surrounding the role of grain boundaries in processes such as grain boundary diffusion, relaxation and grain growth. In addition, the book's authors explore the formation and evolution of the microstructure, texture and ensembles of grain boundaries in materials produced by severe plastic deformation. This updated edition, written by leading experts in the field, has been revised to include new chapters on the basics of nanostructure processing, the influence of deformation mechanisms on grain refinement, processing techniques for ultrafine-grained and nanostructured materials, and much more. - Provides practical applications and methods for the proper implementation of models, allowing for more effective complex metal forming processes - Features new chapters on the microstructure, mechanical behavior and functional properties of HCP metals, processing ultrafine-grained and nanostructured materials, and more - Covers experimental assessment and computational modeling techniques for adiabatic heating and saturation of grain refinement during SPD of metals and alloys
