Download or read book Ultra Low Power Transceiver for Wireless Body Area Networks written by Jens Masuch and published by Springer Science & Business Media. This book was released on 2013-03-28 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless Body Area Networks (WBANs) are expected to promote new applications for the ambulatory health monitoring of chronic patients and elderly population, aiming to improve their quality of life and independence. These networks are composed by wireless sensor nodes (WSNs) used for measuring physiological variables (e.g., glucose level in blood or body temperature) or controlling therapeutic devices (e.g., implanted insulin pumps). These nodes should exhibit a high degree of energy autonomy in order to extend their battery lifetime or even make the node supply to rely on harvesting techniques. Typically, the power budget of WSNs is dominated by the wireless link and, hence, many efforts have been directed during the last years toward the implementation of power efficient transceivers. Because of the short range (typically no more than a few meters) and low data rate (typically in between 10 kb/s and 1 Mb/s), simple communication protocols can be employed. One of these protocols, specifically tailored for WBAN applications, is the Bluetooth low energy (BLE) standard. This book describes the challenges and solutions for the design of ultra-low power transceivers for WBANs applications and presents the implementation details of a BLE transceiver prototype. Coverage includes not only the main concepts and architectures for achieving low power consumption, but also the details of the circuit design and its implementation in a standard CMOS technology.
Download or read book Wake up Receiver Based Ultra Low Power WBAN written by Maarten Lont and published by Springer. This book was released on 2014-05-28 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the cross-layer design and optimization of wake-up receivers for wireless body area networks (WBAN), with an emphasis on low-power circuit design. This includes the analysis of medium access control (MAC) protocols, mixer-first receiver design, and implications of receiver impairments on wideband frequency-shift-keying (FSK) receivers. Readers will learn how the overall power consumption is reduced by exploiting the characteristics of body area networks. Theoretical models presented are validated with two different receiver implementations, in 90nm and 40nm CMOS technology.
Download or read book Ultra Low Power Wireless Technologies for Sensor Networks written by Brian Otis and published by Springer Science & Business Media. This book was released on 2007-02-24 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written for academic and professional researchers designing communication systems for pervasive and low power applications. There is an introduction to wireless sensor networks, but the main emphasis of the book is on design techniques for low power, highly integrated transceivers. Instead of presenting a single design perspective, this book presents the design philosophies from three diverse research groups, providing three completely different strategies for achieving similar goals. By presenting diverse perspectives, this book prepares the reader for the countless design decisions they will be making in their own designs.
Download or read book Ultra Low Power Integrated Circuit Design written by Nianxiong Nick Tan and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the design of CMOS circuits for ultra-low power consumption including analog, radio frequency (RF), and digital signal processing circuits (DSP). The book addresses issues from circuit and system design to production design, and applies the ultra-low power circuits described to systems for digital hearing aids and capsule endoscope devices. Provides a valuable introduction to ultra-low power circuit design, aimed at practicing design engineers; Describes all key building blocks of ultra-low power circuits, from a systems perspective; Applies circuits and systems described to real product examples such as hearing aids and capsule endoscopes.
Download or read book Ultra Low Power Short Range Radios written by Patrick P. Mercier and published by Springer. This book was released on 2015-07-21 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the design of ultra-low-power radio-frequency integrated circuits (RFICs), with communication distances ranging from a few centimeters to a few meters. The authors describe leading-edge techniques to achieve ultra-low-power communication over short-range links. Many different applications are covered, ranging from body-area networks to transcutaneous implant communications and smart-appliance sensor networks. Various design techniques are explained to facilitate each of these applications.
Download or read book Ultra Low Power and Ultra Low Cost Short Range Wireless Receivers in Nanoscale CMOS written by Zhicheng Lin and published by Springer. This book was released on 2015-07-25 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a state-of-the-art description of techniques to be used for ultra-low-power (ULP) and ultra-low-cost (ULC), short-range wireless receivers. Readers will learn what is required to deploy these receivers in short-range wireless sensor networks, which are proliferating widely to serve the internet of things (IoT) for “smart cities.” The authors address key challenges involved with the technology and the typical tradeoffs between ULP and ULC. Three design examples with advanced circuit techniques are described in order to address these trade-offs, which special focus on cost minimization. These three techniques enable respectively, cascading of radio frequency (RF) and baseband (BB) circuits under an ultra-low-voltage (ULV) supply, cascading of RF and BB circuits in current domain for current reuse and a novel function-reuse receiver architecture, suitable for ULV and multi-band ULP applications such as the sub-GHz ZigBee.
Download or read book Ultra Wideband Wireless Body Area Networks written by Kasun Maduranga Silva Thotahewa and published by Springer Science & Business. This book was released on 2014-04-17 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the design of ultra wideband (UWB) technology for wireless body-area networks (WBAN). The authors describe a novel implementation of WBAN sensor nodes that use UWB for data transmission and narrow band for data reception, enabling low power sensor nodes, with high data rate capability. The discussion also includes power efficient, medium access control (MAC) protocol design for UWB based WBAN applications and the authors present a MAC protocol in which a guaranteed delivery mechanism is utilized to transfer data with high priority. Readers will also benefit from this book’s feasibility analysis of the UWB technology for human implant applications through the study of electromagnetic and thermal power absorption of human tissue that is exposed to UWB signals.
Download or read book Electromagnetics of Body Area Networks written by Douglas H. Werner and published by John Wiley & Sons. This book was released on 2016-07-20 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a comprehensive treatment of the field, covering fundamental theoretical principles and new technological advancements, state-of-the-art device design, and reviewing examples encompassing a wide range of related sub-areas. In particular, the first area focuses on the recent development of novel wearable and implantable antenna concepts and designs including metamaterial-based wearable antennas, microwave circuit integrated wearable filtering antennas, and textile and/or fabric material enabled wearable antennas. The second set of topics covers advanced wireless propagation and the associated statistical models for on-body, in-body, and off-body modes. Other sub-areas such as efficient numerical human body modeling techniques, artificial phantom synthesis and fabrication, as well as low-power RF integrated circuits and related sensor technology are also discussed. These topics have been carefully selected for their transformational impact on the next generation of body-area network systems and beyond.
Download or read book Analysis and Design on Low power Short range Radios for Wireless Body Area Networks written by Jiao Cheng and published by . This book was released on 2014 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The release of the IEEE802.15.6 standard has led to increased interest in low-power technologies for wireless body-area-networks (WBANs). The power dissipation, supply voltage, and die area are some of the most important criteria for successful WBAN implementations. Digital-intensive RX architectures can potentially result in sub-1V operation with significant reductions in power consumption and area, but require system and circuit-level innovations to achieve desired sensitivity and linearity. A PSK receiver (RX) is proposed that employs a digital-intensive architecture based on sub-sampling, Q-enhancement, and digital IF to enable lowpower (1.3mW) and low-voltage (0.6V) operation. Implemented in 65nm CMOS, this work is compatible with the IEEE 802.15.6 narrowband physical layer specification and achieves -91dBm and -96dBm sensitivity at 10−3 BER for [pi]/4DQPSK and [pi]/2-DBPSK modulation, respectively. The proposed highly-digital architecture and supply voltage scaling lead to a 3x improvement in RX energy efficiency and minimize silicon area consumption (~0.35mm2 in 65nm CMOS) while achieving state-of-the-art sensitivity. While this implementation focuses on IEEE 802.15.6 narrowband demodulation, the proposed architecture and circuit techniques are generally applicable to RX targeting ultra-low power consumption for sensor networks.
Download or read book Ultra Wideband and 60 GHz Communications for Biomedical Applications written by Mehmet R. Yuce and published by Springer Science & Business Media. This book was released on 2013-10-16 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the design of devices, systems, and circuits for medical applications using the two recently established frequency bands: ultra-wideband (3.1-10.6 GHz) and 60 GHz ISM band. These two bands provide the largest bandwidths available for communication technologies and present many attractive opportunities for medical applications. The applications of these bands in healthcare are wireless body area network (WBAN), medical imaging, biomedical sensing, wearable and implantable devices, fast medical device connectivity, video data transmission, and vital signs monitoring. The recent technological advances and developments proposed or used in medicine based on these two bands are covered. The book introduces possible solutions and design techniques to efficiently implement these systems in medical environment. All individual chapters are written by leading experts in their fields. Contributions by authors are on various applications of ultra-wideband and the 60 GHz ISM band including circuit implementation, UWB and 60 GHz signal transmission around and in-body, antenna design solution, hardware implementation of body sensors, UWB transceiver design, 60 GHz transceiver design, UWB radar for contactless respiratory monitoring, and ultra-wideband based medical Imaging. The book will be a key resource for medical professionals, bio-medical engineers, and graduate and senior undergraduate students in computer, electrical, electronic and biomedical engineering disciplines.
Download or read book Wireless Body Area Networks written by Mehmet R. Yuce and published by CRC Press. This book was released on 2011-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive overview for the latest WBAN systems, technologies, and applications. The chapters of the book have been written by various specialists who are experts in their areas of research and practice. The book starts with the basic techniques involved in designing and building WBAN systems. It explains the deployment issue
Download or read book Ultra low Voltage Low Power Active RC Filters and Amplifiers for Low Energy RF Receivers written by Lucas Compassi Severo and published by Springer Nature. This book was released on 2021-12-04 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents innovative strategies to implement ultra-low voltage (ULV) and low power active circuits used in low energy RF receivers. The authors demonstrate that the use of single-stage amplifiers with the input negative transconductance compensation is a key strategy to allow the operation at low voltage levels with reduced power dissipation. Also, some design methodologies, based on the CMOS transistor operation point, are analyzed and a powerful design methodology is described for this kind of circuit. Readers will be enabled to implement the techniques described to design communication circuits with low power dissipation, useful in a variety of applications, including IoT/IoE devices.
Download or read book Architectures and Synthesizers for Ultra low Power Fast Frequency Hopping WSN Radios written by Emanuele Lopelli and published by Springer Science & Business Media. This book was released on 2010-11-19 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless sensor networks have the potential to become the third wireless revolution after wireless voice networks in the 80s and wireless data networks in the late 90s. Unfortunately, radio power consumption is still a major bottleneck to the wide adoption of this technology. Different directions have been explored to minimize the radio consumption, but the major drawback of the proposed solutions is a reduced wireless link robustness. The primary goal of Architectures and Synthesizers for Ultra-low Power Fast Frequency-Hopping WSN Radios is to discuss, in detail, existing and new architectural and circuit level solutions for ultra-low power, robust, uni-directional and bi-directional radio links. Architectures and Synthesizers for Ultra-low Power Fast Frequency-Hopping WSN Radios guides the reader through the many system, circuit and technology trade-offs he will be facing in the design of communication systems for wireless sensor networks. Finally, this book, through different examples realized in both advanced CMOS and bipolar technologies opens a new path in the radio design, showing how radio link robustness can be guaranteed by techniques that were previously exclusively used in radio systems for middle or high end applications like Bluetooth and military communications while still minimizing the overall system power consumption.
Download or read book Frequency References Power Management for SoC and Smart Wireless Interfaces written by Andrea Baschirotto and published by Springer Science & Business Media. This book was released on 2013-09-26 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 22nd workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, including frequency reference, power management for systems-on-chip, and smart wireless interfaces. This book serves as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.
Download or read book Analog Circuit Design written by Michiel Steyaert and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Circuit Design contains the contribution of 18 tutorials of the 20th workshop on Advances in Analog Circuit Design. Each part discusses a specific to-date topic on new and valuable design ideas in the area of analog circuit design. Each part is presented by six experts in that field and state of the art information is shared and overviewed. This book is number 20 in this successful series of Analog Circuit Design, providing valuable information and excellent overviews of: Topic 1 : Low Voltage Low Power, chairman: Andrea Baschirotto Topic 2 : Short Range Wireless Front-Ends, chairman: Arthur van Roermund Topic 3 : Power Management and DC-DC, chairman : Michiel Steyaert. Analog Circuit Design is an essential reference source for analog circuit designers and researchers wishing to keep abreast with the latest development in the field. The tutorial coverage also makes it suitable for use in an advanced design course.
Download or read book Ultra low Power Radio Transceiver for Wireless Sensor Networks written by Chi Jeon Hwang and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this thesis is to present the design and implementation of ultra-low power radio transceivers at microwave frequencies, which are applicable to wireless sensor network (WSN) and, in particular, to the requirement of the Speckled Computing Consortium (or SpeckNet). This was achieved through quasi-MMIC prototypes and monolithic microwave integrated circuit (MMIC) with dc power consumption of less than 1mW and radio communication ranges operating at least one metre. A wireless sensor network is made up of widely distributed autonomous devices incorporating sensors to cooperatively monitor physical environments. There are different kinds of sensor network applications in which sensors perform a wide range of activities. Among these, a certain set of applications require that sensor nodes collect information about the physical environment. Each sensor node operates autonomously without a central node of control. However, there are many implementation challenges associated with sensor nodes. These nodes must consume extremely low power and must communicate with their neighbours at bit-rates in the order of hundreds of kilobits per second and potentially need to operate at high volumetric densities. Since the power constraint is the most challenging requirement, the radio transceiver must consume ultra-low power in order to prolong the limited battery capacity of a node. The radio transceiver must also be compact, less than 5?5 mm2, to achieve a target size for sensor node and operate over a range of at least one metre to allow communication between widely deployed nodes. Different transceiver topologies are discussed to choose the radio transceiver architecture with specifications that are required in this project. The conventional heterodyne and homodyne topologies are discussed to be unsuitable methods to achieve low power transceiver due to power hungry circuits and their high complexity. The super-regenerative transceiver is also discussed to be unsuitable method because it has a drawback of inherent frequency instability and its characteristics strongly depend on the performance of the super-regenerative oscillator. Instead, a more efficient method of modulation and demodulation such as on-off keying (OOK) is presented. Furthermore, design considerations are shown which can be used to achieve relatively large output voltages for small input powers using an OOK modulation system. This is important because transceiver does not require the use of additional circuits to increase gain or sensitivity and consequently it achieves lower power consumption in a sensor node. This thesis details the circuit design with both a commercial and in-house device technology with ultra-low dc power consumption while retaining adequate RF performance. It details the design of radio building blocks including amplifiers, oscillators, switches and detectors. Furthermore, the circuit integration is presented to achieve a compact transceiver and different circuit topologies to minimize dc power consumption are described. To achieve the sensitivity requirements of receiver, a detector design method with large output voltage is presented. The receiver is measured to have output voltages of 1mVp-p for input powers of -60dBm over a 1 metre operating range while consuming as much as 420?W. The first prototype combines all required blocks using an in-house GaAs MMIC process with commercial pseudomorphic high electron mobility transistor (PHEMT). The OOK radio transceiver successfully operates at the centre frequency of 10GHz for compact antenna and with ultra-low power consumption and shows an output power of -10.4dBm for the transmitter, an output voltage of 1mVp-p at an operating range of 1 metre for the receiver and a total power consumption of 840?W. Based on this prototype, an MMIC radio transceiver at the 24GHz band is also designed to further improve the performance and reduce the physical size with an advanced 50nm gate-length GaAs metamorphic high electron mobility transistor (MHEMT) device technology.
Download or read book High Performance Modelling and Simulation for Big Data Applications written by Joanna Kołodziej and published by Springer. This book was released on 2019-03-25 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book was prepared as a Final Publication of the COST Action IC1406 “High-Performance Modelling and Simulation for Big Data Applications (cHiPSet)“ project. Long considered important pillars of the scientific method, Modelling and Simulation have evolved from traditional discrete numerical methods to complex data-intensive continuous analytical optimisations. Resolution, scale, and accuracy have become essential to predict and analyse natural and complex systems in science and engineering. When their level of abstraction raises to have a better discernment of the domain at hand, their representation gets increasingly demanding for computational and data resources. On the other hand, High Performance Computing typically entails the effective use of parallel and distributed processing units coupled with efficient storage, communication and visualisation systems to underpin complex data-intensive applications in distinct scientific and technical domains. It is then arguably required to have a seamless interaction of High Performance Computing with Modelling and Simulation in order to store, compute, analyse, and visualise large data sets in science and engineering. Funded by the European Commission, cHiPSet has provided a dynamic trans-European forum for their members and distinguished guests to openly discuss novel perspectives and topics of interests for these two communities. This cHiPSet compendium presents a set of selected case studies related to healthcare, biological data, computational advertising, multimedia, finance, bioinformatics, and telecommunications.