Download or read book ULSI Semiconductor Technology Atlas written by Chih-Hang Tung and published by John Wiley & Sons. This book was released on 2003-10-06 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 1,100 TEM images illustrate the science of ULSI The natural outgrowth of VLSI (Very Large Scale Integration), Ultra Large Scale Integration (ULSI) refers to semiconductor chips with more than 10 million devices per chip. Written by three renowned pioneers in their field, ULSI Semiconductor Technology Atlas uses examples and TEM (Transmission Electron Microscopy) micrographs to explain and illustrate ULSI process technologies and their associated problems. The first book available on the subject to be illustrated using TEM images, ULSI Semiconductor Technology Atlas is logically divided into four parts: * Part I includes basic introductions to the ULSI process, device construction analysis, and TEM sample preparation * Part II focuses on key ULSI modules--ion implantation and defects, dielectrics and isolation structures, silicides/salicides, and metallization * Part III examines integrated devices, including complete planar DRAM, stacked cell DRAM, and trench cell DRAM, as well as SRAM as examples for process integration and development * Part IV emphasizes special applications, including TEM in advanced failure analysis, TEM in advanced packaging development and UBM (Under Bump Metallization) studies, and high-resolution TEM in microelectronics This innovative guide also provides engineers and managers in the microelectronics industry, as well as graduate students, with: * More than 1,100 TEM images to illustrate the science of ULSI * A historical introduction to the technology as well as coverage of the evolution of basic ULSI process problems and issues * Discussion of TEM in other advanced microelectronics devices and materials, such as flash memories, SOI, SiGe devices, MEMS, and CD-ROMs
Download or read book Advanced Interconnects for ULSI Technology written by Mikhail Baklanov and published by John Wiley & Sons. This book was released on 2012-04-02 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finding new materials for copper/low-k interconnects is critical to the continuing development of computer chips. While copper/low-k interconnects have served well, allowing for the creation of Ultra Large Scale Integration (ULSI) devices which combine over a billion transistors onto a single chip, the increased resistance and RC-delay at the smaller scale has become a significant factor affecting chip performance. Advanced Interconnects for ULSI Technology is dedicated to the materials and methods which might be suitable replacements. It covers a broad range of topics, from physical principles to design, fabrication, characterization, and application of new materials for nano-interconnects, and discusses: Interconnect functions, characterisations, electrical properties and wiring requirements Low-k materials: fundamentals, advances and mechanical properties Conductive layers and barriers Integration and reliability including mechanical reliability, electromigration and electrical breakdown New approaches including 3D, optical, wireless interchip, and carbon-based interconnects Intended for postgraduate students and researchers, in academia and industry, this book provides a critical overview of the enabling technology at the heart of the future development of computer chips.
Download or read book Advanced Interconnects for ULSI Technology written by Mikhail Baklanov and published by John Wiley & Sons. This book was released on 2012-02-17 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finding new materials for copper/low-k interconnects is critical to the continuing development of computer chips. While copper/low-k interconnects have served well, allowing for the creation of Ultra Large Scale Integration (ULSI) devices which combine over a billion transistors onto a single chip, the increased resistance and RC-delay at the smaller scale has become a significant factor affecting chip performance. Advanced Interconnects for ULSI Technology is dedicated to the materials and methods which might be suitable replacements. It covers a broad range of topics, from physical principles to design, fabrication, characterization, and application of new materials for nano-interconnects, and discusses: Interconnect functions, characterisations, electrical properties and wiring requirements Low-k materials: fundamentals, advances and mechanical properties Conductive layers and barriers Integration and reliability including mechanical reliability, electromigration and electrical breakdown New approaches including 3D, optical, wireless interchip, and carbon-based interconnects Intended for postgraduate students and researchers, in academia and industry, this book provides a critical overview of the enabling technology at the heart of the future development of computer chips.
Download or read book ULSI Technology written by C. Y. Chang and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1996 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This text follows the tradition of Sze's highly successful pioneering text on VLSI technology and is updated with the latest advances in the field of microelectronic chip fabrication. Since computer chips are foundations of modern electronics, these topics are essential for the next generation of USLI technologies, allowing more transistors to be packaged on a single chip. Contributing to each chapter are industry experts, specializing in topics such as epitaxy with low temperature process, rapid thermal processes, low damage plasma reactive ion etching, fine line litography, cleaning technology, clean room technology, packing and reliability."--
Download or read book Characterization and Metrology for ULSI Technology 2003 written by David G. Seiler and published by American Institute of Physics. This book was released on 2003-10-08 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: The worldwide semiconductor community faces increasingly difficult challenges as it moves into the manufacturing of chips with feature sizes approaching 100 nm and beyond. The magnitude of these challenges demands special attention from the metrology and analytical measurements community. New paradigms must be found. Adequate research and development for new metrology concepts are urgently needed. Topics include: integrated circuit history, challenges and overviews, front end, lithography, interconnect and back end, and critical analytical techniques. Characterization and metrology are key enablers for developing new semiconductor technology and in improving manufacturing. This book summarizes major issues and gives critical reviews of important measurement techniques that are crucial to continue the advances in semiconductor technology. It covers major aspects of process technology and most characterization techniques for silicon research, including development, manufacturing, and diagnostics. The editors believe that this book of collected papers provides a concise and effective portrayal of industry characterization needs and the way they are being addressed by industry, academia, and government to continue the dramatic progress in semiconductor technology. Hopefully, it will also provide a basis for stimulating advances in metrology and new ideas for research and development.
Download or read book Characterization and Metrology for ULSI Technology 2005 written by David G. Seiler and published by American Institute of Physics. This book was released on 2005-09-29 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: The worldwide semiconductor community faces increasingly difficult challenges in the era of silicon nanotechnology and beyond. The magnitude of these challenges demands special attention from the metrology and analytical measurements community. New paradigms must be found. Adequate research and development for new metrology concepts are urgently needed. Characterization and metrology are key enablers for developing new semiconductor technology and in improving manufacturing. This book summarizes major issues and gives critical reviews of important measurement techniques that are crucial to continuing the advances in semiconductor technology. It covers major aspects of process technology and most characterization techniques for silicon research, including development, manufacturing, and diagnostics. The book also covers emerging nano-devices and the corresponding metrology challenges that arise.
Download or read book Characterization and Metrology for ULSI Technology 2000 written by David G. Seiler and published by . This book was released on 2001 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Nanoscale ULSI Interconnects Fundamentals and Applications written by Yosi Shacham-Diamand and published by Springer Science & Business Media. This book was released on 2009-09-19 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Advanced ULSI interconnects – fundamentals and applications we bring a comprehensive description of copper-based interconnect technology for ultra-lar- scale integration (ULSI) technology for integrated circuit (IC) application. In- grated circuit technology is the base for all modern electronics systems. You can ?nd electronics systems today everywhere: from toys and home appliances to a- planes and space shuttles. Electronics systems form the hardware that together with software are the bases of the modern information society. The rapid growth and vast exploitation of modern electronics system create a strong demand for new and improved electronic circuits as demonstrated by the amazing progress in the ?eld of ULSI technology. This progress is well described by the famous “Moore’s law” which states, in its most general form, that all the metrics that describe integrated circuit performance (e. g. , speed, number of devices, chip area) improve expon- tially as a function of time. For example, the number of components per chip d- bles every 18 months and the critical dimension on a chip has shrunk by 50% every 2 years on average in the last 30 years. This rapid growth in integrated circuits te- nology results in highly complex integrated circuits with an increasing number of interconnects on chips and between the chip and its package. The complexity of the interconnect network on chips involves an increasing number of metal lines per interconnect level, more interconnect levels, and at the same time a reduction in the interconnect line critical dimensions.
Download or read book Electromigration in ULSI Interconnections written by Cher Ming Tan and published by World Scientific. This book was released on 2010 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromigration in ULSI Interconnections provides a comprehensive description of the electromigration in integrated circuits. It is intended for both beginner and advanced readers on electromigration in ULSI interconnections. It begins with the basic knowledge required for a detailed study on electromigration, and examines the various interconnected systems and their evolution employed in integrated circuit technology. The subsequent chapters provide a detailed description of the physics of electromigration in both Al- and Cu-based Interconnections, in the form of theoretical, experimental and numerical modeling studies. The differences in the electromigration of Al- and Cu-based interconnections and the corresponding underlying physical mechanisms for these differences are explained. The test structures, testing methodology, failure analysis methodology and statistical analysis of the test data for the experimental studies on electromigration are presented in a concise and rigorous manner. Methods of numerical modeling for the interconnect electromigration and their applications to the understanding of electromigration physics are described in detail with the aspects of material properties, interconnection design, and interconnect process parameters on the electromigration performances of interconnects in ULSI further elaborated upon. Finally, the extension of the studies to narrow interconnections is introduced, and future challenges on the study of electromigration are outlined and discussed.
Download or read book Semiconductor Silicon Crystal Technology written by Fumio Shimura and published by Elsevier. This book was released on 2012-12-02 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Silicon Crystal Technology provides information pertinent to silicon, which is the dominant material in the semiconductor industry. This book discusses the technology of integrated circuits (ICs) in electronic materials manufacturer. Comprised of eight chapters, this book provides an overview of the basic science, silicon materials, IC device fabrication processes, and their interaction for enhancing both the processes and materials. This text then proceeds with a discussion of the atomic structure and bonding mechanisms in order to understand the nature and formation of crystal structures, which are the fundamentals of material science. Other chapters consider the technological crystallography and classify natural crystal morphologies based on observation. The final chapter deals with the interrelationships among silicon material characteristics, circuit design, and IC fabrication in order to ensure the fabrication of very-large-scale-integration/ultra-large-scale-integration circuits. This book is a valuable resource for graduate students, physicists, engineers, materials scientists, and professionals involved in semiconductor industry.
Download or read book Crystal Growth and Evaluation of Silicon for VLSI and ULSI written by Golla Eranna and published by CRC Press. This book was released on 2014-12-08 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon, as a single-crystal semiconductor, has sparked a revolution in the field of electronics and touched nearly every field of science and technology. Though available abundantly as silica and in various other forms in nature, silicon is difficult to separate from its chemical compounds because of its reactivity. As a solid, silicon is chemically inert and stable, but growing it as a single crystal creates many technological challenges. Crystal Growth and Evaluation of Silicon for VLSI and ULSI is one of the first books to cover the systematic growth of silicon single crystals and the complete evaluation of silicon, from sand to useful wafers for device fabrication. Written for engineers and researchers working in semiconductor fabrication industries, this practical text: Describes different techniques used to grow silicon single crystals Explains how grown single-crystal ingots become a complete silicon wafer for integrated-circuit fabrication Reviews different methods to evaluate silicon wafers to determine suitability for device applications Analyzes silicon wafers in terms of resistivity and impurity concentration mapping Examines the effect of intentional and unintentional impurities Explores the defects found in regular silicon-crystal lattice Discusses silicon wafer preparation for VLSI and ULSI processing Crystal Growth and Evaluation of Silicon for VLSI and ULSI is an essential reference for different approaches to the selection of the basic silicon-containing compound, separation of silicon as metallurgical-grade pure silicon, subsequent purification, single-crystal growth, and defects and evaluation of the deviations within the grown crystals.
Download or read book ULSI Devices written by C. Y. Chang and published by Wiley-Interscience. This book was released on 2000-05-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete guide to current knowledge and future trends in ULSI devices Ultra-Large-Scale Integration (ULSI), the next generation of semiconductor devices, has become a hot topic of investigation. ULSI Devices provides electrical and electronic engineers, applied physicists, and anyone involved in IC design and process development with a much-needed overview of key technology trends in this area. Edited by two of the foremost authorities on semiconductor device physics, with contributions by some of the best-known researchers in the field, this comprehensive reference examines such major ULSI devices as MOSFET, nonvolatile semiconductor memory (NVSM), and the bipolar transistor, and the improvements these devices offer in power consumption, low-voltage and high-speed operation, and system-on-chip for ULSI applications. Supplemented with introductory material and references for each chapter as well as more than 400 illustrations, coverage includes: * The physics and operational characteristics of the different components * The evolution of device structures the ultimate limitations on device and circuit performance * Device miniaturization and simulation * Issues of reliability and the hot carrier effect * Digital and analog circuit building blocks
Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 1720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.
Download or read book Semiconductor Materials and Process Technology Handbook written by G. E. McGuire and published by . This book was released on 1988 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broad review of semiconductor materials and process technology, with emphasis on very large-scale integration (VLSI) and ultra large scale integration (ULSI). Brings together "snapshots" of the various aspects in different fields within the technology.
Download or read book National Semiconductor Metrology Program written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 2000 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Semiconductor Metrology Program NIST List OF Publications LP 103 May 2000 written by and published by . This book was released on 2000 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ULSI Science and Technology 1997 written by Hisham Z. Massoud and published by The Electrochemical Society. This book was released on 1997 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: