Download or read book Robotics Vision and Control written by Peter Corke and published by Springer. This book was released on 2011-09-05 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author has maintained two open-source MATLAB Toolboxes for more than 10 years: one for robotics and one for vision. The key strength of the Toolboxes provide a set of tools that allow the user to work with real problems, not trivial examples. For the student the book makes the algorithms accessible, the Toolbox code can be read to gain understanding, and the examples illustrate how it can be used —instant gratification in just a couple of lines of MATLAB code. The code can also be the starting point for new work, for researchers or students, by writing programs based on Toolbox functions, or modifying the Toolbox code itself. The purpose of this book is to expand on the tutorial material provided with the toolboxes, add many more examples, and to weave this into a narrative that covers robotics and computer vision separately and together. The author shows how complex problems can be decomposed and solved using just a few simple lines of code, and hopefully to inspire up and coming researchers. The topics covered are guided by the real problems observed over many years as a practitioner of both robotics and computer vision. It is written in a light but informative style, it is easy to read and absorb, and includes a lot of Matlab examples and figures. The book is a real walk through the fundamentals of robot kinematics, dynamics and joint level control, then camera models, image processing, feature extraction and epipolar geometry, and bring it all together in a visual servo system. Additional material is provided at http://www.petercorke.com/RVC
Download or read book Learn Robotics with Raspberry Pi written by Matt Timmons-Brown and published by No Starch Press. This book was released on 2019-01-22 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Learn Robotics with Raspberry Pi, you'll learn how to build and code your own robot projects with just the Raspberry Pi microcomputer and a few easy-to-get components - no prior experience necessary! Learn Robotics with Raspberry Pi will take you from inexperienced maker to robot builder. You'll start off building a two-wheeled robot powered by a Raspberry Pi minicomputer and then program it using Python, the world's most popular programming language. Gradually, you'll improve your robot by adding increasingly advanced functionality until it can follow lines, avoid obstacles, and even recognize objects of a certain size and color using computer vision. Learn how to: - Control your robot remotely using only a Wii remote - Teach your robot to use sensors to avoid obstacles - Program your robot to follow a line autonomously - Customize your robot with LEDs and speakers to make it light up and play sounds - See what your robot sees with a Pi Camera As you work through the book, you'll learn fundamental electronics skills like how to wire up parts, use resistors and regulators, and determine how much power your robot needs. By the end, you'll have learned the basics of coding in Python and know enough about working with hardware like LEDs, motors, and sensors to expand your creations beyond simple robots.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Robot Programming written by Cameron Hughes and published by Que Publishing. This book was released on 2016-05-02 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Start programming robots NOW! Learn hands-on, through easy examples, visuals, and code This is a unique introduction to programming robots to execute tasks autonomously. Drawing on years of experience in artificial intelligence and robot programming, Cameron and Tracey Hughes introduce the reader to basic concepts of programming robots to execute tasks without the use of remote controls. Robot Programming: A Guide to Controlling Autonomous Robots takes the reader on an adventure through the eyes of Midamba, a lad who has been stranded on a desert island and must find a way to program robots to help him escape. In this guide, you are presented with practical approaches and techniques to program robot sensors, motors, and translate your ideas into tasks a robot can execute autonomously. These techniques can be used on today’s leading robot microcontrollers (ARM9 and ARM7) and robot platforms (including the wildly popular low-cost Arduino platforms, LEGO® Mindstorms EV3, NXT, and Wowee RS Media Robot) for your hardware/Maker/DIY projects. Along the way the reader will learn how to: Program robot sensors and motors Program a robot arm to perform a task Describe the robot’s tasks and environments in a way that a robot can process using robot S.T.O.R.I.E.S. Develop a R.S.V.P. (Robot Scenario Visual Planning) used for designing the robot’s tasks in an environment Program a robot to deal with the “unexpected” using robot S.P.A.C.E.S. Program robots safely using S.A.R.A.A. (Safe Autonomous Robot Application Architecture) Approach Program robots using Arduino C/C++ and Java languages Use robot programming techniques with LEGO® Mindstorms EV3, Arduino, and other ARM7 and ARM9-based robots.
Download or read book CNC Robotics written by Geoff Williams and published by McGraw Hill Professional. This book was released on 2003 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Text provides step-by-step, illustrated directions for designing, constructing, and testing a fully functional computer numerical control (CNC) robot. Includes time-saving tips, tricks, and pictoral help along the way. Softcover.
Download or read book Modeling Identification and Control of Robots written by W. Khalil and published by Butterworth-Heinemann. This book was released on 2004-07-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two of Europe's leading robotics experts, this book provides the tools for a unified approach to the modelling of robotic manipulators, whatever their mechanical structure. No other publication covers the three fundamental issues of robotics: modelling, identification and control. It covers the development of various mathematical models required for the control and simulation of robots.·World class authority·Unique range of coverage not available in any other book·Provides a complete course on robotic control at an undergraduate and graduate level
Download or read book Modelling and Control of Robot Manipulators written by Lorenzo Sciavicco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental and technological topics are blended uniquely and developed clearly in nine chapters with a gradually increasing level of complexity. A wide variety of relevant problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained, step by step. Fundamental coverage includes: Kinematics; Statics and dynamics of manipulators; Trajectory planning and motion control in free space. Technological aspects include: Actuators; Sensors; Hardware/software control architectures; Industrial robot-control algorithms. Furthermore, established research results involving description of end-effector orientation, closed kinematic chains, kinematic redundancy and singularities, dynamic parameter identification, robust and adaptive control and force/motion control are provided. To provide readers with a homogeneous background, three appendices are included on: Linear algebra; Rigid-body mechanics; Feedback control. To acquire practical skill, more than 50 examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, more than 80 end-of-chapter exercises are proposed, and the book is accompanied by a solutions manual containing the MATLAB code for computer problems; this is available from the publisher free of charge to those adopting this work as a textbook for courses.
Download or read book The Robotics Primer written by Maja J. Mataric and published by MIT Press. This book was released on 2007-08-17 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broadly accessible introduction to robotics that spans the most basic concepts and the most novel applications; for students, teachers, and hobbyists. The Robotics Primer offers a broadly accessible introduction to robotics for students at pre-university and university levels, robot hobbyists, and anyone interested in this burgeoning field. The text takes the reader from the most basic concepts (including perception and movement) to the most novel and sophisticated applications and topics (humanoids, shape-shifting robots, space robotics), with an emphasis on what it takes to create autonomous intelligent robot behavior. The core concepts of robotics are carried through from fundamental definitions to more complex explanations, all presented in an engaging, conversational style that will appeal to readers of different backgrounds. The Robotics Primer covers such topics as the definition of robotics, the history of robotics (“Where do Robots Come From?”), robot components, locomotion, manipulation, sensors, control, control architectures, representation, behavior (“Making Your Robot Behave”), navigation, group robotics, learning, and the future of robotics (and its ethical implications). To encourage further engagement, experimentation, and course and lesson design, The Robotics Primer is accompanied by a free robot programming exercise workbook that implements many of the ideas on the book on iRobot platforms. The Robotics Primer is unique as a principled, pedagogical treatment of the topic that is accessible to a broad audience; the only prerequisites are curiosity and attention. It can be used effectively in an educational setting or more informally for self-instruction. The Robotics Primer is a springboard for readers of all backgrounds—including students taking robotics as an elective outside the major, graduate students preparing to specialize in robotics, and K-12 teachers who bring robotics into their classrooms.
Download or read book Mechanics and Control written by R.S. Guttalu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Workshop on Control Mechanics has been held at the University of South ern California annually since 1988 under the leadership of late Professor Janislaw M. Skowronski. The primary goal of Professor Skowronski in organizing this series of work shops was to promote the use of advanced mechanics method in control theory with a special emphasis on the control of nonlinear mechanical systems subject to uncertainty. This goal has been achieved through a consistent participation of a large number of researchers in the field of control and mechanics and an intensive exchange of their ideas. Professor Skowronski passed away unexpectedly on March 21, 1992, after the conclusion of the Fifth Workshop. The great success of the Fifth Workshop as well as the entire Control Mechanics Workshops over the years is almost exclusively due to his dedication, enthusiasm, and organizational capabilities. His untimely demise is a great loss to us and to the mechanics and control community. The proceedings of the Fifth Workshop presented in this volume are dedicated to Professor Angelo Miele, one of the pioneers and ,a leading contributor in many fields of control theory and its applications. His contribution spans a wide range of topics such as optimization theory, flight mechanics, astrodynamics, ocean engineering, and numerical methods. The presentations in the workshop reflected many of the areas in which Professor Miele has been active. The papers included in this volume are divided into three major groups of topics.
Download or read book Modeling Identification and Control of Robots written by Wisama Khalil and published by CRC Press. This book was released on 2002 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robot Vision written by A. Pugh and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past five years robot vision has emerged as a subject area with its own identity. A text based on the proceedings of the Symposium on Computer Vision and Sensor-based Robots held at the General Motors Research Laboratories, Warren, Michigan in 1978, was published by Plenum Press in 1979. This book, edited by George G. Dodd and Lothar Rosso!, probably represented the first identifiable book covering some aspects of robot vision. The subject of robot vision and sensory controls (RoViSeC) occupied an entire international conference held in the Hilton Hotel in Stratford, England in May 1981. This was followed by a second RoViSeC held in Stuttgart, Germany in November 1982. The large attendance at the Stratford conference and the obvious interest in the subject of robot vision at international robot meetings, provides the stimulus for this current collection of papers. Users and researchers entering the field of robot vision for the first time will encounter a bewildering array of publications on all aspects of computer vision of which robot vision forms a part. It is the grey area dividing the different aspects of computer vision which is not easy to identify. Even those involved in research sometimes find difficulty in separating the essential differences between vision for automated inspection and vision for robot applications. Both of these are to some extent applications of pattern recognition with the underlying philosophy of each defining the techniques used.
Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.
Download or read book Integrated Visual Servoing and Force Control written by Joris de Schutter and published by Springer Science & Business Media. This book was released on 2003-09-22 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sight and touch are two elementary, but highly complementary senses - for humans as well as for robots. This monograph develops an integrated vision/force control approach for robotics, combining the advantages of both types of sensors while overcoming their individual drawbacks. It shows how integrated vision/force control improves the task quality in the sense of increased accuracy and execution velocity and widens the range of feasible tasks. The unique feature of this work lies in its comprehensive treatment of the problem from the theoretical development of the various schemes down to the real-time implementation of interaction control algorithms on an industrial robot. The presented approach and its potential impact on the performance of the next generation of robots is starting to be recognized by major manufacturers worldwide.
Download or read book Robot Dynamics And Control written by Mark W Spong and published by John Wiley & Sons. This book was released on 2008-08-04 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained introduction to practical robot kinematics and dynamics includes a comprehensive treatment of robot control. It provides background material on terminology and linear transformations, followed by coverage of kinematics and inverse kinematics, dynamics, manipulator control, robust control, force control, use of feedback in nonlinear systems, and adaptive control. Each topic is supported by examples of specific applications. Derivations and proofs are included in many cases. The book includes many worked examples, examples illustrating all aspects of the theory, and problems.
Download or read book Robot Building for Beginners written by David Cook and published by Apress. This book was released on 2010-07-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: “I wrote this book because I love building robots. I want you to love building robots, too. It took me a while to learn about many of the tools and parts in amateur robotics. Perhaps by writing about my experiences, I can give you a head start.” —David Cook Robot Building for Beginners, Second Edition is an update of David Cook’s best-selling Robot Building for Beginners. This book continues its aim at teenagers and adults who have an avid interest in science and dream of building household explorers. No formal engineering education is assumed. The robot described and built in this book is battery powered and about the size of a lunchbox. It is autonomous. That is, it isn’t remote controlled. You’ll begin with some tools of the trade, and then work your way through prototyping, robot bodybuilding, and eventually soldering your own circuit boards. By the book’s end, you will have a solid amateur base of understanding so that you can begin creating your own robots to vacuum your house or maybe even rule the world!
Download or read book Tech Notes written by and published by . This book was released on 1984 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robot Manipulators written by Agustin Jimenez and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research advances in robot manipulators. It offers a complete survey to the kinematic and dynamic modelling, simulation, computer vision, software engineering, optimization and design of control algorithms applied for robotic systems. It is devoted for a large scale of applications, such as manufacturing, manipulation, medicine and automation. Several control methods are included such as optimal, adaptive, robust, force, fuzzy and neural network control strategies. The trajectory planning is discussed in details for point-to-point and path motions control. The results in obtained in this book are expected to be of great interest for researchers, engineers, scientists and students, in engineering studies and industrial sectors related to robot modelling, design, control, and application. The book also details theoretical, mathematical and practical requirements for mathematicians and control engineers. It surveys recent techniques in modelling, computer simulation and implementation of advanced and intelligent controllers.
