Download or read book Turbulent Flow Structure Near Walls written by J. D. A. Walker and published by . This book was released on 1991 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decade, progress has been made in determining the nature of turbulent flow near walls. Many of these advances, which have occurred through new experimental methodologies, direct numerical simulations, and new theoretical developments, are described in this volume.
Download or read book Turbulent Flows written by Jean Piquet and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: obtained are still severely limited to low Reynolds numbers (about only one decade better than direct numerical simulations), and the interpretation of such calculations for complex, curved geometries is still unclear. It is evident that a lot of work (and a very significant increase in available computing power) is required before such methods can be adopted in daily's engineering practice. I hope to l"Cport on all these topics in a near future. The book is divided into six chapters, each· chapter in subchapters, sections and subsections. The first part is introduced by Chapter 1 which summarizes the equations of fluid mechanies, it is developed in C~apters 2 to 4 devoted to the construction of turbulence models. What has been called "engineering methods" is considered in Chapter 2 where the Reynolds averaged equations al"C established and the closure problem studied (§1-3). A first detailed study of homogeneous turbulent flows follows (§4). It includes a review of available experimental data and their modeling. The eddy viscosity concept is analyzed in §5 with the l"Csulting ~alar-transport equation models such as the famous K-e model. Reynolds stl"Css models (Chapter 4) require a preliminary consideration of two-point turbulence concepts which are developed in Chapter 3 devoted to homogeneous turbulence. We review the two-point moments of velocity fields and their spectral transforms (§ 1), their general dynamics (§2) with the particular case of homogeneous, isotropie turbulence (§3) whel"C the so-called Kolmogorov's assumptions are discussed at length.
Download or read book The Structure of Turbulent Shear Flow written by A. A. R. Townsend and published by Cambridge University Press. This book was released on 1976 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develops a physical theory from the mass of experimental results, with revisions to reflect advances of recent years.
Download or read book Practical Channel Hydraulics 2nd edition written by Donald W. Knight and published by CRC Press. This book was released on 2018-03-05 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Channel Hydraulics is a technical guide for estimating flood water levels in rivers using the innovative software known as the Conveyance and Afflux Estimation System (CES-AES). The stand alone software is freely available at HR Wallingford’s website www.river-conveyance.net. The conveyance engine has also been embedded within industry standard river modelling software such as InfoWorks RS and Flood Modeller Pro. This 2nd Edition has been greatly expanded through the addition of Chapters 6-8, which now supply the background to the Shiono and Knight Method (SKM), upon which the CES-AES is largely based. With the need to estimate river levels more accurately, computational methods are now frequently embedded in flood risk management procedures, as for example in ISO 18320 (‘Determination of the stage-discharge relationship’), in which both the SKM and CES feature. The CES-AES incorporates five main components: A Roughness Adviser, A Conveyance Generator, an Uncertainty Estimator, a Backwater Module and an Afflux Estimator. The SKM provides an alternative approach, solving the governing equation analytically or numerically using Excel, or with the short FORTRAN program provided. Special attention is paid to calculating the distributions of boundary shear stress distributions in channels of different shape, and to appropriate formulations for resistance and drag forces, including those on trees in floodplains. Worked examples are given for flows in a wide range of channel types (size, shape, cover, sinuosity), ranging from small scale laboratory flumes (Q = 2.0 1s-1) to European rivers (~2,000 m3s-1), and large-scale world rivers (> 23,000 m3s-1), a ~ 107 range in discharge. Sites from rivers in the UK, France, China, New Zealand and Ecuador are considered. Topics are introduced initially at a simplified level, and get progressively more complex in later chapters. This book is intended for post graduate level students and practising engineers or hydrologists engaged in flood risk management, as well as those who may simply just wish to learn more about modelling flows in rivers.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1984 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on The Physics of Wall Bounded Turbulent Flows on Rough Walls written by T. B. Nickels and published by Springer Science & Business Media. This book was released on 2010-09-08 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of wall-bounded turbulent ows is of considerable interest from both scienti c and practical view points. As such it has attracted a great deal of research over the last 100 years. Much research has concentratedon ows over smooth walls since these are simpler from experimental, numerical and theoretical standpoints. The ow over rough walls has still received considerable attention but progress has necessarilybeenslower.Perhapsthemostessentialproblem(certainlyfromaprac- cal point of view) is to be able to predict the skin-frictiondrag acting on a plate (or a body) given a certain known roughness characteristic of the surface. Unfortunately this has proved to be very dif cult since even the simplest rough surfaces can be characterised by a number of different parameters and we still cannot directly c- nectthese tothe uiddynamicdragin a givensituation.Varioustheoriesandmodels have been proposed in order to make progress but there is still some disagreement in the community as to the correct understanding of these important ows.
Download or read book Turbulent Flows written by Stephen B. Pope and published by Cambridge University Press. This book was released on 2000-08-10 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a graduate text on turbulent flows, an important topic in fluid dynamics. It is up-to-date, comprehensive, designed for teaching, and is based on a course taught by the author at Cornell University for a number of years. The book consists of two parts followed by a number of appendices. Part I provides a general introduction to turbulent flows, how they behave, how they can be described quantitatively, and the fundamental physical processes involved. Part II is concerned with different approaches for modelling or simulating turbulent flows. The necessary mathematical techniques are presented in the appendices. This book is primarily intended as a graduate level text in turbulent flows for engineering students, but it may also be valuable to students in applied mathematics, physics, oceanography and atmospheric sciences, as well as researchers and practising engineers.
Download or read book Turbulence in Open Channel Flows written by Hiroji Nakagawa and published by Routledge. This book was released on 2017-10-02 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of open channel turbulence, focusing especially on certain features stemming from the presence of the free surface and the bed of a river. Part one presents the statistical theory of turbulence; Part two addresses the coherent structures in open-channel flows and boundary layers.
Download or read book Structure of Turbulence and Drag Reduction written by Albert Gyr and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1976 a similar titled IUTAM Symposium (Structure of Turbulence and Drag Reduction) was held in Washington . However, the progress made during the last thirteen years as weil as the much promising current research desired a second one this year. In Washington drag reduction by additives and by direct manipulation of the walls (compliant walls and heated surfaces) were discussed. In the meantime it became evident that drag reduction also occurs when turbulence is influenced by geometrical means, e.g. by influencing the pressure distribution by the shape of the body (airfoils) or by the introduction of streamwise perturbances on a body (riblets). In the recent years turbulence research has seen increasing attention being focused on the investigation of coherent structures, mainly in Newtonian fluids. We all know that these structures are a significant feature of turbulent flows, playing an important role in the energy balance in such flows. However their place in turbulence theories as weil as the factors influencing their development are still poorly understood. Consequently, the investigation of phenomena in which the properties of coherent structures are alte red provides a promising means of improving our understanding of turbulent flows in general.
Download or read book Basics of Engineering Turbulence written by David Ting and published by Academic Press. This book was released on 2016-02-23 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basics of Engineering Turbulence introduces flow turbulence to engineers and engineering students who have a fluid dynamics background, but do not have advanced knowledge on the subject. It covers the basic characteristics of flow turbulence in terms of its many scales. The author uses a pedagogical approach to help readers better understand the fundamentals of turbulence scales, especially how they are derived through the order of magnitude analysis. This book is intended for those who have an interest in flowing fluids. It provides some background, though of limited scope, on everyday flow turbulence, especially in engineering applications. The book begins with the 'basics' of turbulence which is necessary for any reader being introduced to the subject, followed by several examples of turbulence in engineering applications. This overall approach gives readers all they need to grasp both the fundamentals of turbulence and its applications in practical instances. - Focuses on the basics of turbulence for applications in engineering and industrial settings - Provides an understanding of concepts that are often challenging, such as energy distribution among the turbulent structures, the effective diffusivity, and the theory behind turbulence scales - Offers a user-friendly approach with clear-and-concise explanations and illustrations, as well as end-of-chapter problems
Download or read book Investigation of the Turbulence Producing Structures in the Boundary Layer written by Stephen Jay Kline and published by . This book was released on 1991 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Japanese Science and Technology 1983 1984 written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch and published by . This book was released on 1985 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Symposium on Seawater Drag Reduction written by and published by . This book was released on 1998 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frontiers in Computational Fluid Structure Interaction and Flow Simulation written by Tayfun E. Tezduyar and published by Springer. This book was released on 2018-10-26 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational fluid-structure interaction and flow simulation are challenging research areas that bring solution and analysis to many classes of problems in science, engineering, and technology. Young investigators under the age of 40 are conducting much of the frontier research in these areas, some of which is highlighted in this book. The first author of each chapter took the lead role in carrying out the research presented. The topics covered include Computational aerodynamic and FSI analysis of wind turbines, Simulating free-surface FSI and fatigue-damage in wind-turbine structural systems, Aorta flow analysis and heart valve flow and structure analysis, Interaction of multiphase fluids and solid structures, Computational analysis of tire aerodynamics with actual geometry and road contact, and A general-purpose NURBS mesh generation method for complex geometries. This book will be a valuable resource for early-career researchers and students — not only those interested in computational fluid-structure interaction and flow simulation, but also other fields of engineering and science, including fluid mechanics, solid mechanics and computational mathematics – as it will provide them with inspiration and guidance for conducting their own successful research. It will also be of interest to senior researchers looking to learn more about successful research led by those under 40 and possibly offer collaboration to these researchers.
Download or read book Coherent Structures in Complex Systems written by D. Reguera and published by Springer. This book was released on 2008-01-11 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: A rich variety of real-life physical problems which are still poorly understood are of a nonlinear nature. Examples include turbulence, granular flows, detonations and flame propagation, fracture dynamics, and a wealth of new biological and chemical phenomena which are being discovered. Particularly interesting among the manifestations of nonlinearity are coherent structures. This book contains reviews and contributions reporting on the state of the art regarding the role of coherent structures and patterns in nonlinear science.
Download or read book Coherent Flow Structures in Open Channels written by Phil Ashworth and published by . This book was released on 1996-05-06 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coherent Flow Structures in Open Channels presents the first integrated treatment, across a wide range of spatial and temporal scales, of the origins and characteristics of coherent fluid motions and their influence on sediment transport and bed morphology. This book contains contributions from an international and interdisciplinary authorship who are responsible for many of the recent advances in geophysical boundary layer research. Coherent flow structures are examined systematically across a range of scales from flat-bed boundary layers, grain and bedform roughness generated structures through to the largest scales, where structures may be associated with bars, meander bends and channel confluences. The book is broadly organized according to the spatial scales of coherent flow structures and presents a treatise on the study of these motions from theoretical, experimental and field-based approaches. These papers describe the origins, evolution and characteristics of coherent flow structures and the control which they may impart on sediment transport, both as a bed and suspended load, and ultimately on channel morphology. The book also highlights future research themes required to advance the interdisciplinary understanding of these complex, yet ubiquitous, natural flows. The research presented here will find applications within many fields, including geomorphology, sedimentology, the physical and numerical modelling of two-phase flows, environmental fluid and sediment dynamics and river engineering.
