Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 3276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.
Download or read book Handbook of Compound Semiconductors written by Paul H. Holloway and published by Cambridge University Press. This book was released on 2008-10-19 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the recent advances and current technologies used to produce microelectronic and optoelectronic devices from compound semiconductors. It provides a complete overview of the technologies necessary to grow bulk single-crystal substrates, grow hetero-or homoepitaxial films, and process advanced devices such as HBT's, QW diode lasers, etc.
Download or read book Modeling of Chemical Vapor Deposition of Tungsten Films written by Chris R. Kleijn and published by Birkhäuser. This book was released on 2013-11-11 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor equipment modeling has in recent years become a field of great interest, because it offers the potential to support development and optimization of manufacturing equipment and hence reduce the cost and improve the quality of the reactors. This book is the result of two parallel lines of research dealing with the same subject - Modeling of Tungsten CVD processes -, which were per formed independently under very different boundary conditions. On the one side, Chris Kleijn, working in an academic research environment, was able to go deep enough into the subject to laya solid foundation and prove the validity of all the assumptions made in his work. On the other side, Christoph Werner, working in the context of an industrial research lab, was able to closely interact with manufacturing and development engineers in a modern submicron semiconductor processing line. Because of these different approaches, the informal collaboration during the course of the projects proved to be extremely helpful to both sides, even though - or perhaps because - different computer codes, different CVD reactors and also slightly different models were used. In spite of the inconsistencies which might arise from this double approach, we feel that the presentation of both sets of results in one book will be very useful for people working in similar projects.
Download or read book The Chemistry of Metal CVD written by Toivo T. Kodas and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: High purity, thin metal coatings have a variety of important commercial applications, for example, in the microelectronics industry, as catalysts, as protective and decorative coatings as well as in gas-diffusion barriers. This book offers detailed, up- to-date coverage of the chemistry behind the vapor deposition of different metals from organometallic precursors. In nine chapters, the CVD of metals including aluminum, tungsten, gold, silver, platinum, palladium, nickel, as well as copper from copper(I) and copper(II) compounds is covered. The synthesis and properties of the precursors, the growth process, morphology, quality and adhesion of the resulting films as well as laser- assisted, ion- assisted and plasma-assisted methods are discussed. Present applications and prospects for future developments are summarized. With ca. 1000 references and a glossary, this book is a unique source of in-depth information. It is indispensable for chemists, physicists, engineers and materials scientists working with metal- coating processes and technologies. From Reviews: 'I highly recommend this book to anyone interested in learning more about the chemistry of metal CVD.' J. Am Chem. Soc.
Download or read book Characterization in Silicon Processing written by Yale Strausser and published by Elsevier. This book was released on 2013-10-22 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to the consideration of the use use of surface, thin film and interface characterization tools in support of silicon-based semiconductor processing. The approach taken is to consider each of the types of films used in silicon devices individually in its own chapter and to discuss typical problems seen throughout that films' history, including characterization tools which are most effectively used to clarifying and solving those problems.
Download or read book Fundamentals of Semiconductor Processing Technology written by Badih El-Kareh and published by Springer Science & Business Media. This book was released on 1994-12-31 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive toward new semiconductor technologies is intricately related to market demands for cheaper, smaller, faster, and more reliable circuits with lower power consumption. The development of new processing tools and technologies is aimed at optimizing one or more of these requirements. This goal can, however, only be achieved by a concerted effort between scientists, engineers, technicians, and operators in research, development, and manufac turing. It is therefore important that experts in specific disciplines, such as device and circuit design, understand the principle, capabil ities, and limitations of tools and processing technologies. It is also important that those working on specific unit processes, such as lithography or hot processes, be familiar with other unit processes used to manufacture the product. Several excellent books have been published on the subject of process technologies. These texts, however, cover subjects in too much detail, or do not cover topics important to modem tech nologies. This book is written with the need for a "bridge" between different disciplines in mind. It is intended to present to engineers and scientists those parts of modem processing technologies that are of greatest importance to the design and manufacture of semi conductor circuits. The material is presented with sufficient detail to understand and analyze interactions between processing and other semiconductor disciplines, such as design of devices and cir cuits, their electrical parameters, reliability, and yield.
Download or read book VLSI Metallization written by Norman G. Einspruch and published by Academic Press. This book was released on 2014-12-01 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI Electronics Microstructure Science, Volume 15: VLSI Metallization discusses the various issues and problems related to VLSI metallization. It details the available solutions and presents emerging trends. This volume is comprised of 10 chapters. The two introductory chapters, Chapter 1 and 2 serve as general references for the electrical and metallurgical properties of thin conducting films. Subsequent chapters review the various aspects of VLSI metallization. The order of presentation has been chosen to follow the common processing sequence. In Chapter 3, some relevant metal deposition techniques are discussed. Chapter 4 presents the methods of VLSI lithography and etching. Conducting films are first deposited at the gate definition step; therefore, the issues related to gate metallization are discussed next in Chapter 5.In Chapter 6, contact metallization is elaborated, and Chapter 7 is devoted to multilevel metallization schemes. Long-time reliability is the subject of Chapter 8, which discusses the issues of contact and interconnect electromigration. GaAs metallization is tackled in Chapter 9. The volume concludes with a general discussion of the functions of interconnect systems in VLSI. Materials scientists, processing and design engineers, and device physicists will find the book very useful.
Download or read book Handbook of Quality Integrated Circuit Manufacturing written by Robert Zorich and published by Academic Press. This book was released on 2012-12-02 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a comprehensive practical guide to entire wafer fabrication process from A to Z. Written by a practicing process engineer with years of experience, this book provides a thorough introduction to the complex field of IC manufacturing, including wafer area layout and design, yield optimization, just-in-time management systems, statistical quality control, fabrication equipment and its setup, and cleanroom techniques. In addition, it contains a wealth of information on common process problems: How to detect them, how to confirm them, and how to solve them. Whether you are a new enginner or technician just entering the field, a fabrication manager looking for ways to improve quality and production, or someone who would just like to know more about IC manufacturing, this is the book you're looking for. - Provides a readable, practical overview of the entire wafer fabrication process for new engineers and those just entering this complex field - Enables engineers and managers to improve production, raise quality levels, and solve problems that commonly occur in the fabrication process - Presents the latest techniques and gives special attention to Japanese IC manufacturing techniques, showing how they obtain outstanding quality
Download or read book Silicon Devices written by Kenneth A. Jackson and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon is the most important material for the electronics industry. In modern microelectronics silicon devices like diodes and transistors play a major role, and devices like photodetectors or solar cells gain ever more importance. This concise handbook deals with one of the most important topics for the electronics industry. World renowned authors have contributed to this unique overview of the processing of silicon and silicon devices.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Use of Services for Family Planning and Infertility United States 1982 written by Gerry E. Hendershot and published by . This book was released on 1988 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1982 statistics on the use of family planning and infertility services presented in this report are preliminary results from Cycle III of the National Survey of Family Growth (NSFG), conducted by the National Center for Health Statistics. Data were collected through personal interviews with a multistage area probability sample of 7969 women aged 15-44. A detailed series of questions was asked to obtain relatively complete estimates of the extent and type of family planning services received. Statistics on family planning services are limited to women who were able to conceive 3 years before the interview date. Overall, 79% of currently mrried nonsterile women reported using some type of family planning service during the previous 3 years. There were no statistically significant differences between white (79%), black (75%) or Hispanic (77%) wives, or between the 2 income groups. The 1982 survey questions were more comprehensive than those of earlier cycles of the survey. The annual rate of visits for family planning services in 1982 was 1077 visits /1000 women. Teenagers had the highest annual visit rate (1581/1000) of any age group for all sources of family planning services combined. Visit rates declined sharply with age from 1447 at ages 15-24 to 479 at ages 35-44. Similar declines with age also were found in the visit rates for white and black women separately. Nevertheless, the annual visit rate for black women (1334/1000) was significantly higher than that for white women (1033). The highest overall visit rate was for black women 15-19 years of age (1867/1000). Nearly 2/3 of all family planning visits were to private medical sources. Teenagers of all races had higher family planning service visit rates to clinics than to private medical sources, as did black women age 15-24. White women age 20 and older had higher visit rates to private medical services than to clinics. Never married women had higher visit rates to clinics than currently or formerly married women. Data were also collected in 1982 on use of medical services for infertility by women who had difficulty in conceiving or carrying a pregnancy to term. About 1 million ever married women had 1 or more infertility visits in the 12 months before the interview. During the 3 years before interview, about 1.9 million women had infertility visits. For all ever married women, as well as for white and black women separately, infertility services were more likely to be secured from private medical sources than from clinics. The survey design, reliability of the estimates and the terms used are explained in the technical notes.
Download or read book Chemical Vapor Deposition of Refractory Metals and Ceramics written by and published by . This book was released on 1991 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultraclean Surface Processing of Silicon Wafers written by Takeshi Hattori and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: A totally new concept for clean surface processing of Si wafers is introduced in this book. Some fifty distinguished researchers and engineers from the leading Japanese semiconductor companies, such as NEC, Hitachi, Toshiba, Sony and Panasonic as well as from several universities reveal to us for the first time the secrets of these highly productive institutions. They describe the techniques and equipment necessary for the preparation of clean high-quality semiconductor surfaces as a first step in high-yield/high-quality device production. This book thus opens the door to the manufacturing of reliable nanoscale devices and will be extremely useful for every engineer, physicist and technician involved in the production of silicon semiconductor devices.
Download or read book Proceedings of the Tenth International Conference on Chemical Vapor Deposition 1987 written by Electrochemical Society. High Temperature Materials Division and published by . This book was released on 1987 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the First International Symposium on Advanced Materials for ULSI written by Martin P. Scott and published by . This book was released on 1988 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemistry for Electronic Materials written by K.F. Jensen and published by Elsevier. This book was released on 1993-03-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical aspects of materials processing used for electronic applications, e.g. Si, III-V compounds, superconductors, metallization materials, are covered in this volume. Significant recent advances have occurred in the development of new volatile precursors for the fabrication of III-V semiconductor and metal [Cu, W] films by OMCVD. Some fundamentally new and wide-ranging applications have been introduced in recent times. Experimental and modeling studies regarding deposition kinetics, operating conditions and transport as well as properties of films produced by PVD, CVD and PECVD are discussed. The thirty papers in this volume report on many other significant topics also. Research workers involved in these aspects of materials technology may find here some new perspectives with which to augment their projects.
Download or read book ULSI Science and Technology 1987 written by S. Broydo and published by . This book was released on 1987 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt:
