Download or read book Truck pavement economic Modeling and In situ Field Test Data Analysis Applications written by Shad M. Sargand and published by . This book was released on 2007 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: A jointed concrete pavement on I-490 near Rochester, NY, was reconstructed using three different dowel bar spacings in eastbound test sections. Two sections in the westbound direction were instrumented to monitor environmental strain, deflections, and pavement temperatures. Monitoring of the westbound sections was conducted at the time of construction, after 28 days of curing, and at various intervals over the next two years. The instrumentation included deep and shallow linear variable differential transducers (LVDTs) to measure displacements in the center and the corners of the slabs, thermocouples at four depths near the center and at one corner of the slab, and vibrating wire strain gages with built-in thermistors in the center and the left wheel path. Air temperature data were also gathered during monitoring periods. Data were taken from the instruments at the time of construction, and at 37 days (after curing), 12 months, 16 months, and 28 months after construction. In addition to instrumentation readings taken over an approximately 24-hour period, each visit included slab shape measurements made with a Dipstick®, and deflections measured with a falling weight deflectometer (FWD) on the westbound sections. The final data collection visit, in October 2004, also included FWD testing and profilometer measurements on the eastbound sections. In measuring the pavement response, the FWD and LVDT data both indicated some loss of support that varied in response to changing temperature conditions. Of the three dowel bar arrangements, the E2 arrangement that used bars with the smallest cross-section and the narrowest spacing had the best load transfer efficiency.
Download or read book Performance Evaluation of Open Graded Base Course with Doweled and Non doweled Transverse Joints on USH 18 151 STH 29 and USH 151 written by Robert L. Schmitt (Ph.D.) and published by . This book was released on 2010 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Instrumentation of the WAY 30 Test Pavements written by Shad M. Sargand and published by . This book was released on 2008 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The US Route 30 bypass of Wooster, Ohio, in Wayne County, "WAY-30", was constructed to demonstrate two types of extended service pavements, a long-life Portland cement concrete (PCC) pavement on the eastbound lanes and an asphalt concrete (AC) perpetual pavement on the westbound lanes. Both pavements are designed to provide 50 years or more of service with minimal maintenance (e.g. resurfacing). The PCC pavement structure features a thick and extra-wide slab on an asphalt treated base, while the AC pavement structure features a Superpave surface and a Fatigue Resistant Layer (FRL). Two sections in each direction were instrumented with pressure cells to monitor subgrade pressures and deep and shallow LVDTs to record pavement deflections. The AC test section also had transverse and longitudinal strain gages. A weather station was also used to monitor environmental conditions. Nondestructive testing of the subgrade was conducted prior to pavement placement. Pavement materials and samples were tested in the laboratory to determine material parameters. Controlled vehicle load and falling weight deflectometer tests were applied to the AC pavement shortly after the road opened to traffic in December 2005 and again under hot weather conditions in July 2006. Similar tests on the PCC pavement were conducted in December 2005 and August 2006. The response on both types of pavement met their respective design criteria. A verification analysis of the AC pavement response using the elastic layer system (ELS) simulation using material properties derived from laboratory and field sample data yielded unsatisfactory matches, suggesting that some refinement of the approach is needed
Download or read book Guidelines for Implementing NCHRP 1 37A M E Design Procedures Summary of findings implementation plan and next steps written by and published by . This book was released on 2009 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Implementing NCHRP 1 37A M E Design Procedures Literature review written by and published by . This book was released on 2009 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highway agencies across the nation are moving towards implementation of the new AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG) for pavement design. The benefits of implementing the MEPDG for routine use in Ohio includes (1) achieving more cost effective and reliable pavement designs, (2) lower initial and life cycle costs to the agency, and (3) reduced highway user impact due to lane closures for maintenance and rehabilitation of pavements. Implementation of the MEPDG is a process that requires time and agency resources (staffing, training, testing facilities including equipment, and so on). A key requirement is validating the MEPDG's nationally calibrated pavement distress and smoothness prediction models when applied under Ohio conditions and performing local calibration if needed. Feasibility of using the MEPDG's national models in Ohio was investigated under this study using data from a limited number of LTPP projects located in Ohio. Results based on limited data showed inadequate goodness of fit and significant bias in a number of the MEPDG new HMA pavement and JPCP performance prediction models. Limited recalibration of these models showed promising results indicating that a full-scale recalibration effort using a more extensive database assembled from projects located throughout the state is feasible.
Download or read book Paving Materials and Pavement Analysis written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2010 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pavement Design And Paving Material Selection are important for efficient, cost effective, durable, and safe transportation infrastructure Paving Materials and Pavement Analysis contains 73 papers examining bound and unbound material characterization, modeling, and performance of highway and airfield pavements. The papers in this publication were presented during the GeoShanghal 2010 International Conference held in Shanghai, China, June 3-5, 2010.
Download or read book Accelerated Pavement Testing to Transport Infrastructure Innovation written by Armelle Chabot and published by Springer Nature. This book was released on 2020-08-25 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations, and applications in the field of accelerated pavement testing (APT), presented at the 6th International Conference on Accelerated Pavement Testing, in Nantes, France, in April 2022. Discussing APT, which involves rapid testing of full-scale pavement constructions for structural deterioration, the book covers topics such as APT facilities, APT of asphalt concrete and sustainable/innovative materials, APT for airfield pavements, testing of maintenance and rehabilitation solutions, testing of smart and multi-functional pavements, data analysis and modeling, monitoring and non-destructive testing, and efficient means of calibrating/developing pavement design methods. Featuring peer-reviewed contributions by leading international researchers and engineers, the book is a timely and highly relevant resource for materials scientists and engineers interested in determining the performance of pavement structures during their service life (10+ years) in a few weeks or months.
Download or read book Annual Report written by Pennsylvania Transportation Institute and published by . This book was released on 2000 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Directory of Computer Software Applications Civil Structural Engineering 1978 September 1980 written by and published by . This book was released on 1981 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Report written by Alberta Research Council and published by . This book was released on 1974 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanistic empirical Pavement Design Guide written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2008 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book EPA Publications Bibliography written by United States. Environmental Protection Agency and published by . This book was released on 2000-07 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Public Roads written by and published by . This book was released on 1970 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization of Tack Coat for HMA Placement written by Louay Nadhim Mohammad and published by Transportation Research Board. This book was released on 2012 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB’s National Cooperative Highway Research Program (NCHRP) Report 712: Optimization of Tack Coat for HMA Placement presents proposed test methods for measuring the quality and performance characteristics of tack coat in the laboratory and the field, and includes a training manual presenting proposed construction and testing procedures for tack coat materials.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1993-07 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AASHTO Guide for Design of Pavement Structures 1993 written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 1993 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
