Download or read book Traveltime Inversion for a 3 D Near Surface Velocity Model written by James Layton Simmons and published by . This book was released on 1987 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The near surface environment is often the source of the most severe lateral velocity variations present in the seismic section. Near surface lateral velocity variations distort the traveltimes of deeper events and are the most serious limitation in achieving accurate structural maps. This work discusses the development of a near surface velocity model for a shallow marine data set. The near surface model consists of three components. The first is a model of the laterally variable seafloor depth and topography. Below the seafloor, the model consists of the compressional wave velocity as a function of depth which reaches a maximum depth of approximately 500 meters. The presence of vertical and lateral velocity gradients is recognized. Embedded within this slowly varying background velocity field are a number of local lens-like velocity anomalies. The lens anomalies represent the major lateral velocity variations present in the near surface. Autocorrelograms of the deeper pre-stack data are used to obtain the seafloor model. The period of the first water layer reverberation is used to estimate the water depth. These data are enhanced by a deconvolution algorithm which improves the agreement at the line intersections. Measured first arrival times from the pre-stack data are used to develop the subseafloor velocity model. A multichannel filter algorithm is devised to estimate the traveltime deviations produced by the lens anomalies and the common shot statics. These traveltime deviations are the higher spatial frequency components of the first arrival times and are produced by the higher spatial frequency components of the velocity model. The output from the algorithm consists of a sixteen layer traveltime (velocity) perturbation model. The estimates of the lens anomaly and shot static produced traveltime deviations are subtracted from the first arrival times to isolate the slowly varying background components. These data are then inverted using the Generalized Linear Inversion and Tausum algorithms to obtain the laterally varying background velocity model.
Download or read book Land Seismic Case Studies for Near Surface Modeling and Subsurface Imaging written by Öz Yilmaz and published by SEG Books. This book was released on 2021-06-30 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for practicing geophysicists, “Land Seismic Case Studies for Near-Surface Modeling and Subsurface Imaging” is a comprehensive guide to understanding and interpreting seismic data. The culmination of land seismic data acquisition and processing projects conducted by the author over the last two decades, this book contains more than nearly 800 figures from worldwide case studies—conducted in both 2D and 3D. Beginning with Chapter 1 on seismic characterization of the near-surface, Chapter 2 presents near-surface modeling by traveltime and full-wave inversion, Chapter 3 presents near-surface modeling by imaging, and then Chapter 4 includes detailed case studies for near-surface modeling. Chapter 5 reviews single- and multichannel signal processing of land seismic data with the key objective of removing surface waves and guided waves that are characterized as coherent linear noise. Uncommon seismic data acquisition methods, including large-offset acquisition in thrust belts to capture the large-amplitude supercritical reflections, swath-line acquisition, and joint PP and SH- SH seismic imaging are highlighted in Chapter 6, and Chapter 7 presents image-based rms velocity estimation and discusses the problem of velocity uncertainty. The final two chapters focus exclusively on case studies: 2D in Chapter 8 and 3D in Chapter 9. An outstanding teaching tool, this book includes analysis workflows containing processing steps designed to solve specific problems. Essential for anyone involved in acquisition, processing, and inversion of seismic data, this volume will become the definitive reference for understanding how the variables in seismic acquisition are directly reflected in the data.
Download or read book Seismic Ray Theory written by V. Cerveny and published by Cambridge University Press. This book was released on 2001-07-02 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of the seismic ray method; an invaluable advanced textbook and reference volume.
Download or read book Geophysical Data Analysis Discrete Inverse Theory written by William Menke and published by Academic Press. This book was released on 2012-12-02 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geophysical Data Analysis: Discrete Inverse Theory is an introductory text focusing on discrete inverse theory that is concerned with parameters that either are truly discrete or can be adequately approximated as discrete. Organized into 12 chapters, the book's opening chapters provide a general background of inverse problems and their corresponding solution, as well as some of the basic concepts from probability theory that are applied throughout the text. Chapters 3-7 discuss the solution of the canonical inverse problem, that is, the linear problem with Gaussian statistics, and discussions on problems that are non-Gaussian and nonlinear are covered in Chapters 8 and 9. Chapters 10-12 present examples of the use of inverse theory and a discussion on the numerical algorithms that must be employed to solve inverse problems on a computer. This book is of value to graduate students and many college seniors in the applied sciences.
Download or read book Seismic Inversion written by Gerard T. Schuster and published by SEG Books. This book was released on 2017-07-01 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the theory and practice of inverting seismic data for the subsurface rock properties of the earth. The primary application is for inverting reflection and/or transmission data from engineering or exploration surveys, but the methods described also can be used for earthquake studies. Seismic Inversion will be of benefit to scientists and advanced students in engineering, earth sciences, and physics. It is desirable that the reader has some familiarity with certain aspects of numerical computation, such as finite-difference solutions to partial differential equations, numerical linear algebra, and the basic physics of wave propagation. For those not familiar with the terminology and methods of seismic exploration, a brief introduction is provided. To truly understand the nuances of seismic inversion, we have to actively practice what we preach (or teach). Therefore, computational labs are provided for most of the chapters, and some field data labs are given as well.
Download or read book Inverse Problem Theory and Methods for Model Parameter Estimation written by Albert Tarantola and published by SIAM. This book was released on 2005-01-01 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the prediction of observations is a forward problem, the use of actual observations to infer the properties of a model is an inverse problem. Inverse problems are difficult because they may not have a unique solution. The description of uncertainties plays a central role in the theory, which is based on probability theory. This book proposes a general approach that is valid for linear as well as for nonlinear problems. The philosophy is essentially probabilistic and allows the reader to understand the basic difficulties appearing in the resolution of inverse problems. The book attempts to explain how a method of acquisition of information can be applied to actual real-world problems, and many of the arguments are heuristic.
Download or read book Surface Wave Methods for Near Surface Site Characterization written by Sebastiano Foti and published by CRC Press. This book was released on 2014-08-21 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develop a Greater Understanding of How and Why Surface Wave Testing Works Using examples and case studies directly drawn from the authors’ experience, Surface Wave Methods for Near-Surface Site Characterization addresses both the experimental and theoretical aspects of surface wave propagation in both forward and inverse modeling. This book accents the key facets associated with surface wave testing for near-surface site characterization. It clearly outlines the basic principles, the theoretical framework and the practical implementation of surface wave analysis. In addition, it also describes in detail the equipment and measuring devices, acquisition techniques, signal processing, forward and inverse modeling theories, and testing protocols that form the basis of modern surface wave techniques. Review Examples of Typical Applications for This Geophysical Technique Divided into eight chapters, the book explains surface wave testing principles from data measurement to interpretation. It effectively integrates several examples and case studies illustrating how different ground conditions and geological settings may influence the interpretation of data measurements. The authors accurately describe each phase of testing in addition to the guidelines for correctly performing and interpreting results. They present variants of the test within a consistent framework to facilitate comparisons, and include an in-depth discussion of the uncertainties arising at each stage of surface wave testing. Provides a comprehensive and in-depth treatment of all the steps involved in surface wave testing Discusses surface wave methods and their applications in various geotechnical conditions and geological settings Explains how surface wave measurements can be used to estimate both stiffness and dissipative properties of the ground Addresses the issue of uncertainty, which is often an overlooked problem in surface wave testing Includes examples with comparative analysis using different processing techniques and inversion algorithms Outlines advanced applications of surface wave testing such as joint inversion, underwater investigation, and Love wave analysis Written for geotechnical engineers, engineering seismologists, geophysicists, and researchers, Surface Wave Methods for Near-Surface Site Characterization offers practical guidance, and presents a thorough understanding of the basic concepts.
Download or read book Fundamentals of Geophysical Interpretation written by Laurence R. Lines and published by SEG Books. This book was released on 2004 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes discussions of fundamental concepts, explained using heuristic descriptions of seismic modelling, deconvolution, depth migration, and tomography; processing and contouring pitfalls; and developments in time-lapse seismology, borehole geophysics, multicomponent seismology, and integrated reservoir characterization.
Download or read book Advances in Seismic Event Location written by Cliffort H. Thurber and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Seismic Event Location provides a broad overview of the fundamental issues involved in seismic event location, and presents a variety of state-of-the-art location methods and applications at a wide range of spatial scales. Three important themes in the book are: seismic monitoring for a Comprehensive Nuclear-Test-Ban Treaty (CTBT), seismic event location in three-dimensional Earth models, and methods for multiple-event location. Each chapter contains background material to help readers less familiar with the topics covered, as well as to provide abundant references for readers interested in probing deeper into a topic. However, most of the emphasis is on recent advances in methodology and their application. Audience: The book is intended primarily for academic and professional researchers and graduate students in seismology.
Download or read book Mathematics of Multidimensional Seismic Imaging Migration and Inversion written by N. Bleistein and published by Springer Science & Business Media. This book was released on 2000-12-15 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 80 years, the oil and gas industry has used seismic methods to construct images and determine physical characteristics of rocks that can yield information about oil and gas bearing structures in the earth. This book presents the different seismic data processing methods, also known as seismic "migration," in a unified mathematical way. The book serves as a bridge between the applied math and geophysics communities by presenting geophysicists with a practical introduction to advanced engineering mathematics, while presenting mathematicians with a window into the world of the mathematically sophisticated geophysicist.
Download or read book Seismic Tomography written by H.M. Iyer and published by Springer Science & Business Media. This book was released on 1993-05-31 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic review of tomographic applications in seismology and the future directions. Theories and case histories are discussed by the international authors, drawing on their own practical experiences with global and local case histories.
Download or read book Near surface Geophysics written by Dwain K. Butler and published by SEG Books. This book was released on 2005 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part 1, "fundamentals", includes magnetic and electrical methods, subsurface geophysics, near-surface seismology, electromagnetic induction, and ground-penetrating radar. Part 2, "applications", includes determination of physical properties, multimethod surveys and integrated interpretations, and model-based survey planning, execution, and interpretation.
Download or read book Engineering Seismology with Applications to Geotechnical Engineering written by Öz Yilmaz and published by SEG Books. This book was released on 2015-05-20 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of engineering seismology includes geotechnical site investigations for buildings and engineering infrastructures, such as dams, levees, bridges, and tunnels, landslide and active-fault investigations, seismic microzonation, and geophysical investigations of historic buildings. These projects require multidisciplinary participation by the geologist, geophysicist, and geotechnical and earthquake engineers. A key objective of this book (SEG Investigations in Geophysics Series No. 17) by Öz Yilmaz is to encourage the specialists from these disciplines to apply the seismic method to solve the many challenging engineering problems they face. The broader scope of engineering seismology also includes exploration of earth resources, including groundwater exploration, coal and mineral exploration, and geothermal exploration. While focusing on the application of the seismic method to geotechnical site investigations, this book includes many case studies in all of the applications of engineering seismology.
Download or read book Advances in Near surface Seismology and Ground penetrating Radar Volume 15 written by Richard D. Miller and published by SEG Books. This book was released on 2010-01-11 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Near-surface Seismology and Ground-penetrating Radar (SEG Geophysical Developments Series No. 15) is a collection of original papers by renowned and respected authors from around the world. Technologies used in the application of near-surface seismology and ground-penetrating radar have seen significant advances in the last several years. Both methods have benefited from new processing tools, increased computer speeds, and an expanded variety of applications. This book, divided into four sections--"Reviews," "Methodology," "Integrative Approaches," and "Case Studies"--Captures the most significant cutting-edge issues in active areas of research, unveiling truly pertinent studies that address fundamental applied problems. This collection of manuscripts grew from a core group of papers presented at a post-convention workshop, "Advances in Near-surface Seismology and Ground-penetrating Radar," held during the 2009 SEG Annual Meeting in Houston, Texas. This is the first cooperative publication effort between the near-surface communities of SEG, AGU, and EEGS. It will appeal to a large and diverse audience that includes researchers and practitioners inside and outside the near-surface geophysics community. --Publisher description.
Download or read book Seismology and Structure of the Earth written by Barbara Romanowicz and published by Elsevier. This book was released on 2010-04-20 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Geophysics: Seismology and Structure of the Earth, Volume 1, provides a comprehensive review of the state of knowledge on the Earths structure and earthquakes. It addresses various aspects of structural seismology and its applications to other fields of Earth sciences. The book is organized into four parts. The first part principally covers theoretical developments and seismic data analysis techniques from the end of the nineteenth century until the present, with the main emphasis on the development of instrumentation and its deployment. The second part reviews the status of knowledge on the structure of the Earths shallow layers, starting with a global review of the Earth's crustal structure. The third part focuses on the Earth's deep structure, divided into its main units: the upper mantle, the transition zone and upper-mantle discontinuities, the D region at the base of the mantle, and the Earth's core. The fourth part comprises two chapters which discuss constraints on Earth structure from fields other than seismology: mineral physics and geodynamics. - Self-contained volume starts with an overview of the subject then explores each topic with in depth detail - Extensive reference lists and cross references with other volumes to facilitate further research - Full-color figures and tables support the text and aid in understanding - Content suited for both the expert and non-expert
Download or read book Impact Cratering written by G. R. Osinski and published by John Wiley & Sons. This book was released on 2012-12-26 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impact cratering is arguably the most ubiquitous geological process in the Solar System. It has played an important role in Earth’s history, shaping the geological landscape, affecting the evolution of life, and generating economic resources. However, it was only in the latter half of the 20th century that the importance of impact cratering as a geological process was recognized and only during the past couple of decades that the study of meteorite impact structures has moved into the mainstream. This book seeks to fill a critical gap in the literature by providing an overview text covering broad aspects of the impact cratering process and aimed at graduate students, professionals and researchers alike. It introduces readers to the threat and nature of impactors, the impact cratering process, the products, and the effects – both destructive and beneficial. A series of chapters on the various techniques used to study impact craters provide a foundation for anyone studying impact craters for the first time.
Download or read book Advances in Geophysics written by and published by Elsevier. This book was released on 2003-12-11 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The critically acclaimed serialized review journal for nearly fifty years, Advances in Geophysics is a highly respected publication in the field of geophysics. Since 1952, each volume has been eagerly awaited, frequently consulted, and praised by researchers and reviewers alike. Now with over 45 volumes, the Serial contains much material still relevant today—truly an essential publication for researchers in all fields of geophysics.
