Download or read book An Introduction to Fluid Mechanics and Transport Phenomena written by G. Hauke and published by Springer Science & Business Media. This book was released on 2008-08-26 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the foundations of fluid mechanics and transport phenomena in a concise way. It is suitable as an introduction to the subject as it contains many examples, proposed problems and a chapter for self-evaluation.
Download or read book Advanced Transport Phenomena written by L. Gary Leal and published by Cambridge University Press. This book was released on 2007-06-18 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Transport Phenomena is ideal as a graduate textbook. It contains a detailed discussion of modern analytic methods for the solution of fluid mechanics and heat and mass transfer problems, focusing on approximations based on scaling and asymptotic methods, beginning with the derivation of basic equations and boundary conditions and concluding with linear stability theory. Also covered are unidirectional flows, lubrication and thin-film theory, creeping flows, boundary layer theory, and convective heat and mass transport at high and low Reynolds numbers. The emphasis is on basic physics, scaling and nondimensionalization, and approximations that can be used to obtain solutions that are due either to geometric simplifications, or large or small values of dimensionless parameters. The author emphasizes setting up problems and extracting as much information as possible short of obtaining detailed solutions of differential equations. The book also focuses on the solutions of representative problems. This reflects the book's goal of teaching readers to think about the solution of transport problems.
Download or read book Problems for Biomedical Fluid Mechanics and Transport Phenomena written by Mark Johnson and published by Cambridge University Press. This book was released on 2014 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique resource offers over two hundred well-tested bioengineering problems for teaching and examinations. Solutions are available to instructors online.
Download or read book Transport Phenomena in Multiphase Flows written by Roberto Mauri and published by Springer. This book was released on 2015-04-08 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a thorough presentation of the phenomena related to the transport of mass, momentum and energy. It lays all the basic physical principles, then for the more advanced readers, it offers an in-depth treatment with advanced mathematical derivations and ends with some useful applications of the models and equations in specific settings. The important idea behind the book is to unify all types of transport phenomena, describing them within a common framework in terms of cause and effect, respectively represented by the driving force and the flux of the transported quantity. The approach and presentation are original in that the book starts with a general description of transport processes, providing the macroscopic balance relations of fluid dynamics and heat and mass transfer, before diving into the mathematical realm of continuum mechanics to derive the microscopic governing equations at the microscopic level. The book is a modular teaching tool and can be used either for an introductory or for an advanced graduate course. The last 6 chapters will be of interest to more advanced researchers who might be interested in particular applications in physics, mechanical engineering or biomedical engineering. All chapters are complemented with exercises that are essential to complete the learning process.
Download or read book Transport Phenomena with Drops and Bubbles written by Satwindar S. Sadhal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid flows that transfer heat and mass often involve drops and bubbles, particularly if there are changes of phase in the fluid in the formation or condensation of steam, for example. Such flows pose problems for the chemical and mechanical engineer significantly different from those posed by single-phase flows. This book reviews the current state of the field and will serve as a reference for researchers, engineers, teachers, and students concerned with transport phenomena. It begins with a review of the basics of fluid flow and a discussion of the shapes and sizes of fluid particles and the factors that determine these. The discussion then turns to flows at low Reynolds numbers, including effects due to phase changes or to large radial inertia. Flows at intermediate and high Reynolds numbers are treated from a numerical perspective, with reference to experimental results. The next chapter considers the effects of solid walls on fluid particles, treating both the statics and dynamics of the particle-wall interaction and the effects of phase changes at a solid wall. This is followed by a discussion of the formation and breakup of drops and bubbles, both with and without phase changes. The last two chapters discuss compound drops and bubbles, primarily in three-phase systems, and special topics, such as transport in an electric field.
Download or read book Transport Phenomena written by Robert Byron Bird and published by . This book was released on 1960 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Porous Media Transport Phenomena written by Faruk Civan and published by John Wiley & Sons. This book was released on 2011-07-18 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book that makes transport in porous media accessible to students and researchers alike Porous Media Transport Phenomena covers the general theories behind flow and transport in porous media a solid permeated by a network of pores filled with fluid which encompasses rocks, biological tissues, ceramics, and much more. Designed for use in graduate courses in various disciplines involving fluids in porous materials, and as a reference for practitioners in the field, the text includes exercises and practical applications while avoiding the complex math found in other books, allowing the reader to focus on the central elements of the topic. Covering general porous media applications, including the effects of temperature and particle migration, and placing an emphasis on energy resource development, the book provides an overview of mass, momentum, and energy conservation equations, and their applications in engineered and natural porous media for general applications. Offering a multidisciplinary approach to transport in porous media, material is presented in a uniform format with consistent SI units. An indispensable resource on an extremely wide and varied topic drawn from numerous engineering fields, Porous Media Transport Phenomena includes a solutions manual for all exercises found in the book, additional questions for study purposes, and PowerPoint slides that follow the order of the text.
Download or read book Transport Phenomena in Porous Media III written by Derek B Ingham and published by Elsevier. This book was released on 2005-07-29 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid and flow problems in porous media have attracted the attention of industrialists, engineers and scientists from varying disciplines, such as chemical, environmental, and mechanical engineering, geothermal physics and food science. There has been a increasing interest in heat and fluid flows through porous media, making this book a timely and appropriate resource.Each chapter is systematically detailed to be easily grasped by a research worker with basic knowledge of fluid mechanics, heat transfer and computational and experimental methods. At the same time, the readers will be informed of the most recent research literature in the field, giving it dual usage as both a post-grad text book and professional reference.Written by the recent directors of the NATO Advanced Study Institute session on 'Emerging Technologies and Techniques in Porous Media' (June 2003), this book is a timely and essential reference for scientists and engineers within a variety of fields.
Download or read book Transport Phenomena in Microfluidic Systems written by Pradipta Kumar Panigrahi and published by John Wiley & Sons. This book was released on 2016-02-15 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully comprehensive introduction to the rapidly emerging area of micro systems technology Transport Phenomena in Micro Systems explores the fundamentals of the new technologies related to Micro-Electro-Mechanical Systems (MEMS). It deals with the behavior, precise control and manipulation of fluids that are geometrically constrained to a small, typically sub-millimeter, scale, such as nl, pl, fl, small size, low energy consumption, effects of the micro domain and heat transfer in the related devices. The author describes in detail and with extensive illustration micro fabrication, channel flow, transport laws, magnetophoresis, micro scale convection and micro sensors and activators, among others. This book spans multidisciplinary fields such as material science and mechanical engineering, engineering, physics, chemistry, microtechnology and biotechnology. Brings together in one collection recent and emerging developments in this fast-growing area of micro systems Covers multidisciplinary fields such as materials science, mechanical engineering, microtechnology and biotechnology, et al Comprehensive coverage of analytical models in microfluidics and MEMS technology Introduces micro fluidics applications include the development of inkjet printheads, micro-propulsion, and micro thermal technologies Presented in a very logical format Supplies readers with problems and solutions
Download or read book An Introduction to Transport Phenomena in Materials Engineering written by David R. Gaskell and published by Prentice Hall. This book was released on 1992 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to transport phenomena in materials engineering balances an explanation of the fundamentals governing fluid flow and the transport of heat and mass with their common applications to specific systems in materials engineering. It introduces the influences of properties and geometry on fluid flow using familiar fluids such as air and water. Covers topics such as engineering units and pressure in static fluids; momentum transport and laminar flow of Newtonian fluids; equations of continuity and conservation of momentum and fluid flow past submerged objects; turbulent flow; mechanical energy balance and its application to fluid flow; transport of heat by conduction; transport of heat by convection; transient heat flow; heat transport by thermal radiation; mass transport in the solid state by diffusion; mass transport in fluids. Includes extensive appendices.
Download or read book Transport Phenomena written by Robert S. Brodkey and published by Brodkey Publishing. This book was released on 2003-02 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part II covers applications in greater detail. The three transport phenomena--heat, mass, and momentum transfer--are treated in depth through simultaneous (or parallel) developments.
Download or read book Transport Phenomena in Porous Media II written by I. Pop and published by Elsevier. This book was released on 2002-06-20 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport phenomena in porous media continues to be a field which attracts intensive research activity. This is primarily due to the fact that it plays an important and practical role in a large variety of diverse scientific applications. Transport Phenomena in Porous Media II covers a wide range of the engineering and technological applications, including both stable and unstable flows, heat and mass transfer, porosity, and turbulence.Transport Phenomena in Porous Media II is the second volume in a series emphasising the fundamentals and applications of research in porous media. It contains 16 interrelated chapters of controversial, and in some cases conflicting, research, over a wide range of topics. The first volume of this series, published in 1998, met with a very favourable reception. Transport Phenomena in Porous Media II maintains the original concept including a wide and diverse range of topics, whilst providing an up-to-date summary of recent research in the field by its leading practitioners.
Download or read book Coulson and Richardson s Chemical Engineering written by R. P. Chhabra and published by Butterworth-Heinemann. This book was released on 2017-11-28 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coulson and Richardson's Chemical Engineering has been fully revised and updated to provide practitioners with an overview of chemical engineering. Each reference book provides clear explanations of theory and thorough coverage of practical applications, supported by case studies. A worldwide team of editors and contributors have pooled their experience in adding new content and revising the old. The authoritative style of the original volumes 1 to 3 has been retained, but the content has been brought up to date and altered to be more useful to practicing engineers. This complete reference to chemical engineering will support you throughout your career, as it covers every key chemical engineering topic.Coulson and Richardson's Chemical Engineering: Volume 1A: Fluid Flow: Fundamentals and Applications, Seventh Edition, covers momentum transfer (fluid flow) which is one of the three main transport processes of interest to chemical engineers. - Covers momentum transfer (fluid flow) which is one of the three main transport processes of interest to chemical engineers - Includes reference material converted from textbooks - Explores topics, from foundational through technical - Includes emerging applications, numerical methods, and computational tools
Download or read book Transport Phenomena in Materials Processing written by David R. Poirier and published by Springer. This book was released on 2016-12-06 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a teachable and readable approach to transport phenomena (momentum, heat, and mass transport) by providing numerous examples and applications, which are particularly important to metallurgical, ceramic, and materials engineers. Because the authors feel that it is important for students and practicing engineers to visualize the physical situations, they have attempted to lead the reader through the development and solution of the relevant differential equations by applying the familiar principles of conservation to numerous situations and by including many worked examples in each chapter. The book is organized in a manner characteristic of other texts in transport phenomena. Section I deals with the properties and mechanics of fluid motion; Section II with thermal properties and heat transfer; and Section III with diffusion and mass transfer. The authors depart from tradition by building on a presumed understanding of the relationships between the structure and properties of matter, particularly in the chapters devoted to the transport properties (viscosity, thermal conductivity, and the diffusion coefficients). In addition, generous portions of the text, numerous examples, and many problems at the ends of the chapters apply transport phenomena to materials processing.
Download or read book Modeling Phenomena of Flow and Transport in Porous Media written by Jacob Bear and published by Springer. This book was released on 2018-01-25 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and discusses the construction of mathematical models that describe phenomena of flow and transport in porous media as encountered in civil and environmental engineering, petroleum and agricultural engineering, as well as chemical and geothermal engineering. The phenomena of transport of extensive quantities, like mass of fluid phases, mass of chemical species dissolved in fluid phases, momentum and energy of the solid matrix and of fluid phases occupying the void space of porous medium domains are encountered in all these disciplines. The book, which can also serve as a text for courses on modeling in these disciplines, starts from first principles and focuses on the construction of well-posed mathematical models that describe all these transport phenomena.
Download or read book Transport Phenomena written by Estéban Saatdjian and published by John Wiley & Sons. This book was released on 2000-11-08 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable text, provides a much-needed overview of both the theoretical development, as well as appropriate numerical solutions, for all aspects of transport phenomena. It contains a basic introduction to many aspects of fluid mechanics, heat transfer and mass transfer, and the conservation equations for mass, energy and momentum are discussed with reference to engineering applications. Heat transfer by conduction, radiation, natural and forced convection is studied, as well as mass transfer and incompressible fluid mechanics. The second part of the book deals with numerical methods used to solve the problems encountered earlier. The basic concepts of finite difference and finite volume methods are presented. Other subjects usually covered in mathematical textbooks such as vector and tensor analysis, Laplace transforms, and Runge-Kutta methods are discussed in the Appendices. * Offers comprehensive coverage of both transport phenomena and numerical and analytical solutions to the problems. * Includes comprehensive coverage of numerical techniques. * Provides real-life problems and solutions, which are vital to the understanding and implementation of applications. This work will be welcomed not only by senior and graduate students in mechanical, aeronautical and chemical engineering, but also for engineers practising in these fields.
Download or read book Introduction to Transport Phenomena Modeling written by Gianpaolo Ruocco and published by Springer. This book was released on 2018-02-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers an introduction to multiple, interdependent transport phenomena as they occur in various fields of physics and technology like transport of momentum, heat, and matter. These phenomena are found in a number of combined processes in the fields of chemical, food, biomedical, and environmental sciences. The book puts a special emphasis on numerical modeling of both purely diffusive mechanisms and macroscopic transport such as fluid dynamics, heat and mass convection. To favor the applicability of the various concepts, they are presented with a simplicity of exposure, and synthesis has been preferred with respect to completeness. The book includes more than 130 graphs and figures, to facilitate the understanding of the various topics. It also presents many modeling examples throughout the text, to control that the learned material is properly understood. There are some typos in the text. You can see the corrections here: http://www.springer.com/cda/content/document/cda_downloaddocument/ErrataCorrige_v0.pdf?SGWID=0-0-45-1679320-p181107156
