Download or read book Transition Metal Oxides written by P.A. Cox and published by Oxford University Press. This book was released on 2010-08-19 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transition metal oxides form a series of compounds with a uniquely wide range of electronic properties. The main aim of this book is to describe the varied electronic behaviour shown by transition metal oxides, and to discuss the different types of theoretical models that have been proposed to interpret this behaviour.
Download or read book Physics of Transition Metal Oxides written by Sadamichi Maekawa and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fact that magnetite (Fe304) was already known in the Greek era as a peculiar mineral is indicative of the long history of transition metal oxides as useful materials. The discovery of high-temperature superconductivity in 1986 has renewed interest in transition metal oxides. High-temperature su perconductors are all cuprates. Why is it? To answer to this question, we must understand the electronic states in the cuprates. Transition metal oxides are also familiar as magnets. They might be found stuck on the door of your kitchen refrigerator. Magnetic materials are valuable not only as magnets but as electronics materials. Manganites have received special attention recently because of their extremely large magnetoresistance, an effect so large that it is called colossal magnetoresistance (CMR). What is the difference between high-temperature superconducting cuprates and CMR manganites? Elements with incomplete d shells in the periodic table are called tran sition elements. Among them, the following eight elements with the atomic numbers from 22 to 29, i. e. , Ti, V, Cr, Mn, Fe, Co, Ni and Cu are the most im portant. These elements make compounds with oxygen and present a variety of properties. High-temperature superconductivity and CMR are examples. Most of the textbooks on magnetism discuss the magnetic properties of transition metal oxides. However, when one studies magnetism using tradi tional textbooks, one finds that the transport properties are not introduced in the initial stages.
Download or read book Frontiers of 4D and 5D transition Metal Oxides written by Gang Cao and published by World Scientific. This book was released on 2013 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at advanced undergraduates, graduate students and other researchers who possess an introductory background in materials physics and/or chemistry, and an interest in the physical and chemical properties of novel materials, especially transition metal oxides.New materials often exhibit novel phenomena of great fundamental and technological importance. Contributing authors review the structural, physical and chemical properties of notable 4d- and 5d-transition metal oxides discovered over the last 10 years. These materials exhibit extraordinary physical properties that differ significantly from those of the heavily studied 3d-transition metal oxides, mainly due to the relatively strong influence of the spin-orbit interaction and orbital order in 4d- and 5d materials. The immense growth in publications addressing the physical properties of these novel materials underlines the need to document recent advances and the current state of this field. This book includes overviews of the current experimental situation concerning these materials.
Download or read book Transition Metal Oxides written by Chintamani Nagesa Ramachandra Rao and published by VCH Publishers. This book was released on 1995 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Nanocomposite Supercapacitor Materials I written by Kamal K. Kar and published by Springer Nature. This book was released on 2020-04-16 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers a comprehensive overview of the characteristics of several types of materials that are widely used in the current era of supercapacitors; namely, architectured carbon materials, transition metal oxides and conducting polymers. It provides readers with a complete introduction to the fundamentals of supercapacitors, including the development of new electrolytes and electrodes, while highlighting the advantages, challenges, applications and future of these materials. This book is part of the Handbook of Nanocomposite Supercapacitor Materials. Supercapacitors have emerged as promising devices for electrochemical energy storage, playing an important role in energy harvesting for meeting the current demands of increasing global energy consumption. The handbook covers the materials science and engineering of nanocomposite supercapacitors, ranging from their general characteristics and performance to materials selection, design and construction. Covering both fundamentals and recent developments, this handbook serves a readership encompassing students, professionals and researchers throughout academia and industry, particularly in the fields of materials chemistry, electrochemistry, and energy storage and conversion. It is ideal as a reference work and primary resource for any introductory senior-level undergraduate or beginning graduate course covering supercapacitors.
Download or read book Adsorption and Catalysis on Transition Metals and Their Oxides written by Vsevolod F. Kiselev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with adsorption and catalysis on the surface of transition elements and their compounds, many of which are in teresting because of their particular electronic structure. The authors have worked through a vast body of experimental evi dence on the structure and properties of surfaces of transition metals and relevant oxides. Consideration is given mostly to simple (as opposed to mixed) oxides of transition elements, to common metals and to the adsorption of simple gases. A great deal of attention is paid to the nature of active surface sites responsible for chemisorption and catalytic transformations. The description relies mainly on the simplified ligand-field theory, which, however, proves quite satisfactory for predicting the adsorptive and catalytic activity of species. In many cases simple systems were explored with the aid of novel techniques, and it is only for such systems that the mechanism of the ele mentary act of adsorption and catalysis can be given adequate treatment. The present monograph has emerged from our earlier work in Russian, which appeared in the Khimiya Publishing House (Mos cow) in 1981. This English edition has, however, been revised completely to broaden its scope and to include more recent a chievements. For fruitful discussions the authors are grateful to A.A.
Download or read book Resistive Switching written by Daniele Ielmini and published by John Wiley & Sons. This book was released on 2015-12-23 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its comprehensive coverage, this reference introduces readers to the wide topic of resistance switching, providing the knowledge, tools, and methods needed to understand, characterize and apply resistive switching memories. Starting with those materials that display resistive switching behavior, the book explains the basics of resistive switching as well as switching mechanisms and models. An in-depth discussion of memory reliability is followed by chapters on memory cell structures and architectures, while a section on logic gates rounds off the text. An invaluable self-contained book for materials scientists, electrical engineers and physicists dealing with memory research and development.
Download or read book Metal Oxides written by J.L.G. Fierro and published by CRC Press. This book was released on 2005-08-24 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemistry of metals has traditionally been more understood than that of its oxides. As catalytic applications continue to grow in a variety of disciplines, Metal Oxides: Chemistry and Applications offers a timely account of transition-metal oxides (TMO), one of the most important classes of metal oxides, in the context of catalysis. The
Download or read book Transition Metal Compounds written by Daniel Khomskii and published by Cambridge University Press. This book was released on 2014-10-23 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes all aspects of the physics of transition metal compounds, providing a comprehensive overview of this diverse class of solids. Set within a modern conceptual framework, this is an invaluable, up-to-date resource for graduate students, researchers and industrial practitioners in solid-state physics and chemistry, materials science, and inorganic chemistry.
Download or read book Metal Oxides in Supercapacitors written by Deepak P. Dubal and published by Elsevier. This book was released on 2017-07-10 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Supercapacitors addresses the fundamentals of metal oxide-based supercapacitors and provides an overview of recent advancements in this area. Metal oxides attract most of the materials scientists use due to their excellent physico-chemical properties and stability in electrochemical systems. This justification for the usage of metal oxides as electrode materials in supercapacitors is their potential to attain high capacitance at low cost. After providing the principles, the heart of the book discusses recent advances, including: binary metal oxides-based supercapacitors, nanotechnology, ternary metal oxides, polyoxometalates and hybrids. Moreover, the factors affecting the charge storage mechanism of metal oxides are explored in detail. The electrolytes, which are the soul of supercapacitors and a mostly ignored character of investigations, are also exposed in depth, as is the fabrication and design of supercapacitors and their merits and demerits. Lastly, the market status of supercapacitors and a discussion pointing out the future scope and directions of next generation metal oxides based supercapacitors is explored, making this a comprehensive book on the latest, cutting-edge research in the field. Explores the most recent advances made in metal oxides in supercapacitors Discusses cutting-edge nanotechnology for supercapacitors Includes fundamental properties of metal oxides in supercapacitors that can be used to guide and promote technology development Contains contributions from leading international scientists active in supercapacitor research and manufacturing
Download or read book Thin Film Metal Oxides written by Shriram Ramanathan and published by Springer Science & Business Media. This book was released on 2009-12-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Film Metal-Oxides provides a representative account of the fundamental structure-property relations in oxide thin films. Functional properties of thin film oxides are discussed in the context of applications in emerging electronics and renewable energy technologies. Readers will find a detailed description of deposition and characterization of metal oxide thin films, theoretical treatment of select properties and their functional performance in solid state devices, from leading researchers. Scientists and engineers involved with oxide semiconductors, electronic materials and alternative energy will find Thin Film Metal-Oxides a useful reference.
Download or read book Transition Metal Oxides written by H.H. Kung and published by Elsevier. This book was released on 1989-04-01 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the author presents an up-to-date summary of existing information on the structure, electronic properties, chemistry and catalytic properties of transition metal oxides. The subjects covered in the book can be divided into three sections. The first (chapters 1 to 3) covers the structural, physical, magnetic, and electronic properties of transition metal oxides. Although the emphasis is on surface properties, relevant bulk properties are also discussed. The second section (chapters 4 to 7) covers surface chemical properties. It includes topics that describe the importance of surface coordinative unsaturation in adsorption, the formation of surface acidity and the role of acidity in determining surface chemical properties, the nature and reactivities of adsorbed oxygen, and the surface chemistry in the reduction of oxides. The third section (chapters 8 to 14) is on the catalytic properties. Various catalytic reactions including decomposition, hydrogenation, isomerization, metathesis, selective oxidation, and reactions involving carbon oxides are discussed. Emphasis is placed more on reaction mechanisms and the role of catalysts than on kinetics and processes. Chapters on the preparation of oxide catalysts and on photo-assisted processes are also included. Whenever appropriate, relationships between various topics are indicated. Written for surface physicists, chemists, and catalytic engineers, the book will serve as a useful source of information for investigators and as a comprehensive overview of the subject for graduate students.
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. Presents case studies in each chapter that provide a focus on the industrial applications Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book Infrared Spectroscopy of Adsorbed Species on the Surface of Transition Metal Oxides written by Anatoli Davydov and published by . This book was released on 1990-10-11 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Included here is a summary of findings made by the author from infrared investigations of the surface chemistry of simple and complex oxide catalysts. The focus is on spectral characteristics of active sites on oxide surfaces, namely hydroxyl groups, coordinatively unsaturated cations, and surface oxygen. There is a detailed account of the method used for characterizing the oxidation state and coordination of cations on oxide surfaces by the adsorption of probe molecules. In addition, the role played by surface sites in surface-molecule adsorption is used to organize and classify data relating to the interaction of carbon, nitrogen, ammonia, and alkenes with surfaces of transition metal oxides and with supported or mixed oxides containing transition metal cations.
Download or read book Solid State Chemistry written by Aaron Wold and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject matterofsolid state chemistry lies within the spheres ofboth physical and inorganic chemistry. In addition, there is a large overlap with solid state physics and materials engineering. However, solid state chemistry has still to be recognized by the general body ofchemists as a legitimate subfield ofchemistry. The discipline is not even well defined as to content and has many facets that make writing a textbook a formidable task. The early studies carried out in the United States by Roland Ward and his co workers emphasized the synthesisofnew materials and the determination oftheir structure. His work on doped alkaline earth sulfides formed the basis for the development of infrared phosphors and his pioneering studies on oxides were important in understanding the structural features of both the perovskite oxides as well as the magnetoplumbites. In 1945, A. F. Wells published the first edition of Structural Inorganic Chemistry. This work attempts to demonstrate that the synthesis, structure, and properties of solids form an important part of inorganic chemistry. Now, after almost 50 years during which many notable advances have been made in solid state chemistry, it is still evident that the synthesis, structure determination, and properties of solids receive little attention in most treatments of inorganic chemistry. The development of the field since the early studies of Roland Ward (early 1940s) has been rapid.
Download or read book Chemically Deposited Nanocrystalline Metal Oxide Thin Films written by Fabian I. Ezema and published by Springer Nature. This book was released on 2021-06-26 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides beginners in the areas of thin film preparation, characterization, and device making, while providing insight into these areas for experts. As chemically deposited metal oxides are currently gaining attention in development of devices such as solar cells, supercapacitors, batteries, sensors, etc., the book illustrates how the chemical deposition route is emerging as a relatively inexpensive, simple, and convenient solution for large area deposition. The advancement in the nanostructured materials for the development of devices is fully discussed.
Download or read book Solar Hydrogen Generation Transition Metal Oxides in Water Photoelectrolysis written by Jinghua Guo and published by McGraw Hill Professional. This book was released on 2012-01-27 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art renewable energy science research and applications Solar Hydrogen Generation: Transition Metal Oxides in Water Photoelectrolysis provides expert techniques for extracting hydrogen from water using transition metal oxides as catalysts. The basic processes of electrochemistry and photocatalysis for hydrogen production are described along with photocatalytic reactions and semiconductor photocatalysts, particularly metal oxides. This in-depth guide illustrates the corresponding crystal structure vs. electronic structure and optical properties vs. light absorption of transition metal oxides. Impurity and doped photocatalysts, integrated organic and inorganic systems, surface and interface chemistry, and nanostructure and morphology in photocatalysis applications are all addressed. This comprehensive resource introduces soft x-ray absorption (XAS), soft x-ray emission spectroscopy (XES), and resonant inelastic soft x-ray scattering (RIXS), followed by a description of instrumentation. COVERAGE INCLUDES: * Hydrogen generation: electrochemistry and photoelectrolysis * Photocatalytic reactions, oxidation, and reduction * Transition metal oxides * Crystal structure and electronic structure * Optical properties and light absorption * Impurity, dopants, and defects * Surface and morphology * Soft x-ray spectroscopy and electronic structure
