Download or read book Fundamentals of RF and Microwave Transistor Amplifiers written by Inder Bahl and published by John Wiley & Sons. This book was released on 2009-06-17 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Up-to-Date Treatment of RF and Microwave Transistor Amplifiers This book provides state-of-the-art coverage of RF and microwave transistor amplifiers, including low-noise, narrowband, broadband, linear, high-power, high-efficiency, and high-voltage. Topics covered include modeling, analysis, design, packaging, and thermal and fabrication considerations. Through a unique integration of theory and practice, readers will learn to solve amplifier-related design problems ranging from matching networks to biasing and stability. More than 240 problems are included to help readers test their basic amplifier and circuit design skills-and more than half of the problems feature fully worked-out solutions. With an emphasis on theory, design, and everyday applications, this book is geared toward students, teachers, scientists, and practicing engineers who are interested in broadening their knowledge of RF and microwave transistor amplifier circuit design.

Download or read book Designing Analog Chips written by Hans Camenzind and published by Virtualbookworm Publishing. This book was released on 2005 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to CMOS and bipolar analog IC design. The book presumes no prior knowledge of linear design, making it comprehensible to engineers with a non-analog back-ground. The emphasis is on practical design, covering the entire field with hundreds of examples to explain the choices. Concepts are presented following the history of their discovery. Content: 1. Devices Semiconductors, The Bipolar Transistor, The Integrated Circuit, Integrated NPN Transistors, The Case of the Lateral PNP Transistor, CMOS Transistors, The Substrate PNP Transistor, Diodes, Zener Diodes, Resistors, Capacitors, CMOS vs. Bipolar; 2. Simulation, DC Analysis, AC Analysis, Transient Analysis, Variations, Models, Diode Model, Bipolar Transis-tor Model, Model for the Lateral PNP Transistor, MOS Transistor Models, Resistor Models, Models for Capacitors; 3. Current Mirrors; 4. Differential Pairs; 5. Current Sources; 6. Time Out: Analog Measures, dB, RMS, Noise, Fourier Analysis, Distortion, Frequency Compensation; 7. Bandgap References; 8. Op Amps; 9. Comparators; 10. Transimpedance Amplifiers; 11. Timers and Oscillators; 12. Phase-Locked Loops; 13. Filters; 14. Power, Linear Regulators, Low Drop-Out Regulators, Switching Regulators, Linear Power Amplifiers, Switching Power Am-plifiers; 15. A to D and D to A, The Delta-Sigma Converter; 16. Odds and Ends, Gilbert Cell, Multipliers, Peak Detectors, Rectifiers and Averaging Circuits, Thermometers, Zero-Crossing Detectors; 17. Layout.

Download or read book Valve and Transistor Audio Amplifiers written by John Linsley Hood and published by Elsevier. This book was released on 1997-11-17 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: The audio amplifier is at the heart of audio design. Its performance determines largely the performance of any audio system. John Linsley Hood is widely regarded as the finest audio designer around, and pioneered design in the post-valve era. His mastery of audio technology extends from valves to the latest techniques. This is John Linsley Hood's greatest work yet, describing the milestones that have marked the development of audio amplifiers since the earliest days to the latest systems. Including classic amps with valves at their heart and exciting new designs using the latest components, this book is the complete world guide to audio amp design. John Linsley Hood is responsible for numerous amplifier designs that have led the way to better sound, and has also kept up a commentary on developments in audio in magazines such as The Gramophone, Electronics in Action and Electronics and Wireless World. He is also the author of The Art of Linear Electronics and Audio Electronics published by Newnes. - Complete world guide to audio amp design written by world famous author - Covers classic amps to new designs using latest components - Includes the best of valves as well as best of transistors

Download or read book Transistor Circuit Design written by J. A. Walston and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of Transistor Circuits written by S W Amos and published by Elsevier. This book was released on 2000-03-06 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last 40 years, Principles of Transistor Circuits has provided students and practitioners with a text they can rely on to keep them at the forefront of transistor circuit design. Although integrated circuits have widespread application, the role of discrete transistors both as important building blocks which students must understand, and as practical solutions to design problems, remains undiminished. The ninth edition has been thoroughly updated to cover the latest technology and applications, including computer circuit simulation, and many diagrams have been revised to bring them in line with current usage. Updated topics include thyristors, Darlington transistors, amplifiers, ring modulators, power supplies, optoelectronics and logic circuits. - The transistor circuits bible - Updated with new developments in technology and applications - Accessible step-by-step introduction ideal for noviceS

Download or read book Op Amps for Everyone written by Ron Mancini and published by Newnes. This book was released on 2003 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The operational amplifier ("op amp") is the most versatile and widely used type of analog IC, used in audio and voltage amplifiers, signal conditioners, signal converters, oscillators, and analog computing systems. Almost every electronic device uses at least one op amp. This book is Texas Instruments' complete professional-level tutorial and reference to operational amplifier theory and applications. Among the topics covered are basic op amp physics (including reviews of current and voltage division, Thevenin's theorem, and transistor models), idealized op amp operation and configuration, feedback theory and methods, single and dual supply operation, understanding op amp parameters, minimizing noise in op amp circuits, and practical applications such as instrumentation amplifiers, signal conditioning, oscillators, active filters, load and level conversions, and analog computing. There is also extensive coverage of circuit construction techniques, including circuit board design, grounding, input and output isolation, using decoupling capacitors, and frequency characteristics of passive components. The material in this book is applicable to all op amp ICs from all manufacturers, not just TI. Unlike textbook treatments of op amp theory that tend to focus on idealized op amp models and configuration, this title uses idealized models only when necessary to explain op amp theory. The bulk of this book is on real-world op amps and their applications; considerations such as thermal effects, circuit noise, circuit buffering, selection of appropriate op amps for a given application, and unexpected effects in passive components are all discussed in detail. *Published in conjunction with Texas Instruments *A single volume, professional-level guide to op amp theory and applications *Covers circuit board layout techniques for manufacturing op amp circuits.

Download or read book Audio Power Amplifier Design written by Douglas Self and published by Taylor & Francis. This book was released on 2013-07-04 with total page 1293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is essential for audio power amplifier designers and engineers for one simple reason...it enables you as a professional to develop reliable, high-performance circuits. The Author Douglas Self covers the major issues of distortion and linearity, power supplies, overload, DC-protection and reactive loading. He also tackles unusual forms of compensation and distortion produced by capacitors and fuses. This completely updated fifth edition includes four NEW chapters including one on The XD Principle, invented by the author, and used by Cambridge Audio. Crosstalk, power amplifier input systems, and microcontrollers in amplifiers are also now discussed in this fifth edition, making this book a must-have for audio power amplifier professionals and audiophiles.

Download or read book Principles of Transistor Circuits written by S W Amos and published by Elsevier. This book was released on 2013-10-22 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: For over thirty years, Stan Amos has provided students and practitioners with a text they could rely on to keep them at the forefront of transistor circuit design. This seminal work has now been presented in a clear new format and completely updated to include the latest equipment such as laser diodes, Trapatt diodes, optocouplers and GaAs transistors, and the most recent line output stages and switch-mode power supplies.Although integrated circuits have widespread application, the role of discrete transistors is undiminished, both as important building blocks which students must understand and as practical solutions to design problems, especially where appreciable power output or high voltage is required. New circuit techniques covered for the first time in this edition include current-dumping amplifiers, bridge output stages, dielectric resonator oscillators, crowbar protection circuits, thyristor field timebases, low-noise blocks and SHF amplifiers in satellite receivers, video clamps, picture enhancement circuits, motor drive circuits in video recorders and camcorders, and UHF modulators. The plan of the book remains the same: semiconductor physics is introduced, followed by details of the design of transistors, amplifiers, receivers, oscillators and generators. Appendices provide information on transistor manufacture and parameters, and a new appendix on transistor letter symbols has been included.

Download or read book Operational Amplifiers and Linear Integrated Circuits written by James M.. Fiore and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this book is to encourage the reader to become proficient in the analysis and design of circuits utilizing modern linear integrated circuits. It progresses from the fundamental circuit building blocks through to analog and digital conversion systems. A methodical step-by-step presentation introduces the basic idealized operational amplifiers and eventually examines practical limitations in great detail. Each chapter has a problem set and contains extended topic to present extra discussion and details about the subject.

Download or read book The Design of Active Crossovers written by Douglas Self and published by Taylor & Francis. This book was released on 2012-08-06 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Design of Active Crossovers is a unique guide to the design of high-quality circuitry for splitting audio frequencies into separate bands and directing them to different loudspeaker drive units specifically designed for handling their own range of frequencies. Traditionally this has been done by using passive crossover units built into the loudspeaker boxes; this is the simplest solution, but it is also a bundle of compromises. The high cost of passive crossover components, and the power losses in them, means that passive crossovers have to use relatively few parts. This limits how well the crossover can do its basic job. Active crossovers, sometimes called electronic crossovers, tackle the problem in a much more sophisticated manner. The division of the audio into bands is performed at low signal levels, before the power amplifiers, where it can be done with much greater precision. Very sophisticated filtering and response-shaping networks can be built at comparatively low cost. Time-delay networks that compensate for phyical misalignments in speaker construction can be implemented easily; the equivalent in a passive crossover is impractical because of the large cost and the heavy signal losses. Active crossover technology is also directly applicable to other band-splitting signal-processing devices such as multi-band compressors. The use of active crossovers is increasing. They are used by almost every sound reinforcement system, by almost every recording studio monitoring set-up, and to a small but growing extent in domestic hifi. There is a growing acceptance in the hifi industry that multi-amplification using active crossovers is the obvious next step (and possibly the last big one) to getting the best possible sound. There is also a large usage of active crossovers in car audio, with the emphasis on routing the bass to enormous low-frequency loudspeakers. One of the very few drawbacks to using the active crossover approach is that it requires more power amplifiers; these have often been built into the loudspeaker, along with the crossover, and this deprives the customer of the chance to choose their own amplifier, leading to resistance to the whole active crossover philosophy. A comprehensive proposal for solving this problem is an important part of this book. The design of active crossovers is closely linked with that of the loudspeakers they drive. A chapter gives a concise but complete account of all the loudspeaker design issues that affect the associated active crossover. This book is packed full of valuable information, with virtually every page revealing nuggets of specialized knowledge never before published. Essential points of theory bearing on practical performance are lucidly and thoroughly explained, with the mathematics kept to an essential minimum. Douglas' background in design for manufacture ensures he keeps a wary eye on the cost of things. Features: Crossover basics and requirements The many different crossover types and how they work Design almost any kind of active filter with minimal mathematics Make crossover filters with very low noise and distortion Make high-performance time-delay filters that give a constant delay over a wide range of frequency Make a wide variety of audio equaliser stages: shelving, peaking and notch characteristics All about active crossover system design for optimal noise and dynamic range There is a large amount of new material that has never been published before. A few examples: using capacitance multipliers in biquad equalisers, opamp output biasing to reduce distortion, the design of NTMTM notch crossovers, the design of special filters for filler-driver crossovers, the use of mixed capacitors to reduce filter distortion, differentially elevated internal levels to reduce noise, and so on. Douglas wears his learning lightly, and this book features the engaging prose style familiar from his other books The Audio Power Amplifier Design Handbook, Self on Audio, and the recent Small Signal Audio Design.

Download or read book Semiconductor Circuit Design for A f and D c Amplification and Switching written by Joseph Watson and published by . This book was released on 1970 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Small Signal Audio Design written by Douglas Self and published by CRC Press. This book was released on 2020-04-17 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small Signal Audio Design is a highly practical handbook providing an extensive repertoire of circuits that can be assembled to make almost any type of audio system. The publication of Electronics for Vinyl has freed up space for new material, (though this book still contains a lot on moving-magnet and moving-coil electronics) and this fully revised third edition offers wholly new chapters on tape machines, guitar electronics, and variable-gain amplifiers, plus much more. A major theme is the use of inexpensive and readily available parts to obtain state-of-the-art performance for noise, distortion, crosstalk, frequency response accuracy and other parameters. Virtually every page reveals nuggets of specialized knowledge not found anywhere else. For example, you can improve the offness of a fader simply by adding a resistor in the right place- if you know the right place. Essential points of theory that bear on practical audio performance are lucidly and thoroughly explained, with the mathematics kept to an absolute minimum. Self’s background in design for manufacture ensures he keeps a wary eye on the cost of things. This book features the engaging prose style familiar to readers of his other books. You will learn why mercury-filled cables are not a good idea, the pitfalls of plating gold on copper, and what quotes from Star Trek have to do with PCB design. Learn how to: make amplifiers with apparently impossibly low noise design discrete circuitry that can handle enormous signals with vanishingly low distortion use humble low-gain transistors to make an amplifier with an input impedance of more than 50 megohms transform the performance of low-cost-opamps build active filters with very low noise and distortion make incredibly accurate volume controls make a huge variety of audio equalisers make magnetic cartridge preamplifiers that have noise so low it is limited by basic physics, by using load synthesis sum, switch, clip, compress, and route audio signals be confident that phase perception is not an issue This expanded and updated third edition contains extensive new material on optimising RIAA equalisation, electronics for ribbon microphones, summation of noise sources, defining system frequency response, loudness controls, and much more. Including all the crucial theory, but with minimal mathematics, Small Signal Audio Design is the must-have companion for anyone studying, researching, or working in audio engineering and audio electronics.

Download or read book Semiconductor Devices written by James Fiore and published by . This book was released on 2017-05-11 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Across 15 chapters, Semiconductor Devices covers the theory and application of discrete semiconductor devices including various types of diodes, bipolar junction transistors, JFETs, MOSFETs and IGBTs. Applications include rectifying, clipping, clamping, switching, small signal amplifiers and followers, and class A, B and D power amplifiers. Focusing on practical aspects of analysis and design, interpretations of device data sheets are integrated throughout the chapters. Computer simulations of circuit responses are included as well. Each chapter features a set of learning objectives, numerous sample problems, and a variety of exercises designed to hone and test circuit design and analysis skills. A companion laboratory manual is available. This is the print version of the on-line OER.

Download or read book Electronics written by Dinesh C. Dube and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise and comprehensive account of circuit design and analysis suitable for undergraduate honours and graduate courses in physics.

Download or read book ELECTRONIC DEVICES AND CIRCUITS written by BALBIR KUMAR and published by PHI Learning Pvt. Ltd.. This book was released on 2014-01-01 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a text for the students of various engineering streams such as electronics/electrical engineering, electronics and communication engineering, computer science and engineering, IT, instrumentation and control and mechanical engineering, this well-written text provides an introduction to electronic devices and circuits. It introduces to the readers electronic circuit analysis and design techniques with emphasis on the operation and use of semiconductor devices. It covers principles of operation, the characteristics and applications of fundamental electronic devices such as p-n junction diodes, bipolar junction transistors (BJTs), and field effect transistors (FETs), and special purpose diodes and transistors. In its second edition, the book includes a new chapter on “special purpose devices”. What distinguishes this text is that it explains the concepts and applications of the subject in such a way that even an average student will be able to understand working of electronic devices, analyze, design and simulate electronic circuits. This comprehensive book provides: • A large number of solved examples. • Summary highlighting the important points in the chapter. • A number of Review Questions at the end of each chapter. • A fairly large number of unsolved problems with answers.

Download or read book Switchmode RF and Microwave Power Amplifiers written by Andrei Grebennikov and published by Academic Press. This book was released on 2021-03-19 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switchmode RF and Microwave Power Amplifiers, Third Edition is an essential reference book on developing RF and microwave switchmode power amplifiers. The book combines theoretical discussions with practical examples, allowing readers to design high-efficiency RF and microwave power amplifiers on different types of bipolar and field-effect transistors, design any type of high-efficiency switchmode power amplifiers operating in Class D or E at lower frequencies and in Class E or F and their subclasses at microwave frequencies with specified output power, also providing techniques on how to design multiband and broadband Doherty amplifiers using different bandwidth extension techniques and implementation technologies. This book provides the necessary information to understand the theory and practical implementation of load-network design techniques based on lumped and transmission-line elements. It brings a unique focus on switchmode RF and microwave power amplifiers that are widely used in cellular/wireless, satellite and radar communication systems which offer major power consumption savings. - Provides a complete history of high-efficiency Class E and Class F techniques - Presents a new chapter on Class E with shunt capacitance and shunt filter to simplify the design of high-efficiency power amplifier with broader frequency bandwidths - Covers different Doherty architectures, including integrated and monolithic implementations, which are and will be, used in modern communication systems to save power consumption and to reduce size and costs - Includes extended coverage of multiband and broadband Doherty amplifiers with different frequency ranges and output powers using different bandwidth extension techniques - Balances theory with practical implementation, avoiding a cookbook approach and enabling engineers to develop better designs, including hybrid, integrated and monolithic implementations

Download or read book Audio Power Amplifier Design Handbook written by Douglas Self and published by Taylor & Francis. This book was released on 2006 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface; Introduction and general survey; History, architecture and negative feedback; The general principles of power amplifiers; The small signal stages; The Class-B output stage; The output stage II; Compensation, slew-rate, and stability; Power supplies and PSRR; Class-A power amplifiers; Class D power amplifiers; Class-G power amplifiers; FET output stages; Thermal compensation and thermal dynamics; Amplifier and loudspeaker protection; Grounding and practical matters; Testing and safety; Index.