Download or read book Transforming Clothing Production into a Demand driven Knowledge based High tech Industry written by Lutz Walter and published by Springer Science & Business Media. This book was released on 2009-09-17 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent trends in the fashion market (including an impressive increase in the number of new collections, product assortments and variants, and the emerging mass-customization model) dictate the need for a new approach. "Transforming Clothing Production into a Demand-Driven, Knowledge-Based, High-Tech Industry" discusses the ramifications of such an approach, which must lead to a drastic shortening of the whole cycle from conception to production and retail, as well as a shift from a labor-intensive to a technology- and knowledge-intensive clothing manufacturing industry. "Transforming Clothing Production into a Demand-Driven, Knowledge-Based, High-Tech Industry" is a collection of short papers from prominent researchers involved with the LEAPFROG (Leadership for European Apparel Production From Research along Original Guidelines) initiative. LEAPFROG proposes a revolutionary industrial paradigm based on research results in scientific-technological fields.
Download or read book Knowledge Intensive Entrepreneurship written by Nancy J. Hodges and published by Springer. This book was released on 2017-10-28 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines knowledge-intensive entrepreneurship (KIE) with a focus on the European textile and apparel industries. The primary purpose is to review the extant academic literature related to the European textile and apparel industries and reflect on that review empirically using a new and robust database on KIE to discover patterns between human capital and strategic entrepreneurial and innovative behavior. According to the Advancing Knowledge-Intensive Entrepreneurship and Innovation for Economic Growth and Social Well-being in Europe (AEGIS) project, KIE is defined as an interface between knowledge generation and diffusion and the productive system. Knowledge-intensive entrepreneurs are thus involved in mechanisms that translate knowledge into innovation, which in turn leads to economic development and growth within an industry and/or region. To date, KIE is often associated with high-tech industries such as aerospace, computer engineering, automotive or telecommunications. For this reason, few studies have been conducted that specifically examine KIE as an avenue for firm or sector growth in the textile and apparel industries. However, new studies have positioned these industries as ones in which KIE can foster growth through innovation, and where products and processes are often evaluated within a knowledge-based framework. Building on this growing literature base, this volume explores potential policies and strategies for driving innovation and growth at the firm and industry levels in Europe and other regions, including the United States.
Download or read book Garment Manufacturing Technology written by Rajkishore Nayak and published by Elsevier. This book was released on 2015-05-26 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Garment Manufacturing Technology provides an insiders' look at this multifaceted process, systematically going from design and production to finishing and quality control. As technological improvements are transforming all aspects of garment manufacturing allowing manufacturers to meet the growing demand for greater productivity and flexibility, the text discusses necessary information on product development, production planning, and material selection. Subsequent chapters covers garment design, including computer-aided design (CAD), advances in spreading, cutting and sewing, and new technologies, including alternative joining techniques and seamless garment construction. Garment finishing, quality control, and care-labelling are also presented and explored. Provides an insiders look at garment manufacturing from design and production to finishing and quality control Discusses necessary information on product development, production planning, and material selection Includes discussions of computer-aided design (CAD), advances in spreading, cutting and sewing, and new technologies, including alternative joining techniques and seamless garment construction Explores garment finishing, quality control, and care labelling
Download or read book Automation in Garment Manufacturing written by Rajkishore Nayak and published by Woodhead Publishing. This book was released on 2017-11-10 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation in Garment Manufacturing provides systematic and comprehensive insights into this multifaceted process. Chapters cover the role of automation in design and product development, including color matching, fabric inspection, 3D body scanning, computer-aided design and prototyping. Part Two covers automation in garment production, from handling, spreading and cutting, through to finishing and pressing techniques. Final chapters discuss advanced tools for assessing productivity in manufacturing, logistics and supply-chain management. This book is a key resource for all those engaged in textile and apparel development and production, and is also ideal for academics engaged in research on textile science and technology. Delivers theoretical and practical guidance on automated processes that benefit anyone developing or manufacturing textile products Offers a range of perspectives on manufacturing from an international team of authors Provides systematic and comprehensive coverage of the topic, from fabric construction, through product development, to current and potential applications
Download or read book The Global Textile and Clothing Industry written by Roshan Shishoo and published by Elsevier. This book was released on 2012-07-18 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in technology, combined with the ever-evolving needs of the global market, are having a strong impact on the textile and clothing sector. The global textile and clothing industry: Technological advances and future challenges provides an essential review of these changes, and considers their implications for future strategies concerning production and marketing of textile products.Beginning with a review of trends in the global textile industry, the book goes on to consider the impact of environmental regulation on future textile products and processes. Following this, the importance of innovation-driven textile research and development, and the role of strategic technology roadmapping are highlighted. Both the present structure and future adaptation of higher education courses in textile science are reviewed, before recent advances in textile manufacturing technology, including joining techniques, 3D body scanning and garment design and explored in depth. Finally, The global textile and clothing industry concludes by considering automating textile preforming technology for the mass production of fibre-reinforced polymer (FRP) composites.With its distinguished editor and international team of expert contributors, The global textile and clothing industry: Technological advances and future challenges is an essential guide to key challenges and developments in this industrial sector. Comprehensively examines the implications of technological advancements and the evolving needs of the global market on the textile and clothing industry and considers their role on the future of textile manufacturing The importance of innovation-driven textile research and development and the role of strategic technology roadmapping are thoroughly investigated Recent advances in textile manufacturing technology, including joining techniques, 3D body scanning and garment design and explored in depth
Download or read book Digitising Enterprise in an Information Age written by David L. Olson and published by CRC Press. This book was released on 2021-06-23 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digitising Enterprise in an Information Age is an effort that focuses on a very vast cluster of Enterprises and their digitising technology involvement and take us through the road map of the implementation process in them, some of them being ICT, Banking, Stock Markets, Textile Industry & ICT, Social Media, Software Quality Assurance, Information Systems Security and Risk Management, Employee Resource Planning etc. It delves on increased instances of cyber spamming and the threat that poses to e-Commerce and Banking and tools that help and Enterprise toward of such threats. To quote Confucius, “As the water shapes itself to the vessel that contains it, so does a wise man adapts himself to circumstances.” And the journey of evolution and progression will continue and institutions and enterprises will continue to become smarter and more and more technology savvy. Enterprises and businesses across all genre and spectrum are trying their level best to adopt to change and move on with the changing requirements of technology and as enterprises and companies upgrade and speed up their digital transformations and move their outdate heirloom systems to the cloud, archaic partners that don't keep up will be left behind. Note: T&F does not sell or distribute the Hardback in India, Pakistan, Nepal, Bhutan, Bangladesh and Sri Lanka.
Download or read book Industry 4 0 Shaping The Future of The Digital World written by Paulo Jorge da Silva Bartolo and published by CRC Press. This book was released on 2020-10-28 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: The City of Manchester, once the birthplace of the 1st Industrial Revolution, is today a pioneering hub of the 4th Industrial Revolution (Industry 4.0), offering Industry 4.0 solutions in advanced materials, engineering, healthcare and social sciences. Indeed, the creation of some of the city’s greatest academic institutions was a direct outcome of the industrial revolution, so it was something of a homecoming that the Sustainable Smart Manufacturing (S2M) Conference was hosted by The University of Manchester in 2019. The conference was jointly organised by The University of Manchester, The University of Lisbon and The Polytechnic of Leiria – the latter two bringing in a wealth of expertise in how Industry 4.0 manifests itself in the context of sustainably evolving, deeply-rooted cities. S2M-2019 instigated the development of 61 papers selected for publication in this book on areas of Smart Manufacturing, Additive Manufacturing and Virtual Prototyping, Materials for Healthcare Applications and Circular Economy, Design Education, and Urban Spaces.
Download or read book Sustainable Growth in the African Economy written by Jeffrey James and published by Taylor & Francis. This book was released on 2017-03-27 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current growth path in sub-Saharan Africa is not following the Lewis model where labour moves from low-productivity agriculture to higher productivity manufacturing. Instead, it is moving directly to inappropriate (import and labour-saving) methods. This book seeks to show how this distorted growth process leaves out the major resource of these countries – labour – and ends up creating unstable employment and underemployment, leading to inequality and poverty. In this way it demonstrates how the entire growth process may be rendered unstable and unsustainable. Sustainable Growth in the African Economy considers whether the relatively rapid growth of recent years can be maintained or improved upon, with a focus on the process of industrialisation. Basing itself on a well-known dual-economy model, the proposed book focuses on several major problems of industrialisation, which has long been seen as the means of structural change in an economy which begins from a low income level. The book considers how the future trajectory of sub-Saharan Africa compares to recent success stories on other continents, and explains how factors such as rapid population growth and capital and import-intensive technology in manufacturing could foreshadow future social and political problems. This book will be essential reading to students and policymakers who are concerned with the existing pattern of African growth.
Download or read book Robotics in Smart Manufacturing written by Pedro Neto and published by Springer. This book was released on 2013-06-12 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Workshop on Robotics in Smart Manufacturing, WRSM 2013, held in Porto, Portugal, in June 2013. The 20 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers address issues such as robotic machining, off-line robot programming, robot calibration, new robotic hardware and software architectures, advanced robot teaching methods, intelligent warehouses, robot co-workers and application of robots in the textile industry.
Download or read book Textiles and Fashion written by Rose Sinclair and published by Elsevier. This book was released on 2014-11-08 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major textbook is designed for students studying textiles and fashion at higher and undergraduate level, as well as those needing a comprehensive and authoritative overview of textile materials and processes. The first part of the book reviews the main types of natural and synthetic fibres and their properties. Part two provides a systematic review of the key processes involved first in converting fibres into yarns and then transforming yarns into fabrics. Part three discusses the range of range of finishing techniques for fabrics. The final part of the book looks specifically at the transformation of fabric into apparel, from design and manufacture to marketing. With contributions from leading experts in their fields, this major book provides the definitive one-volume guide to textile manufacture. Provides comprehensive coverage of the types and properties of textile fibres to yarn and fabric manufacture, fabric finishing, apparel production and fashion Focused on the needs of college and undergraduate students studying textiles or fashion courses Each chapter ends with a summary to emphasise key points, a comprehensive self-review section, and project ideas are also provided
Download or read book Interoperability for Enterprise Software and Applications written by Herve Panetto and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the framework of the Sixth I-ESA International Conference, supported by the INTEROP VLab (International Virtual Laboratory on Enterprise Interoperability, http://www.interop-vlab.eu), three workshops and a Doctoral Symposium have been organized in order to strengthen some key topics related to interoperability for enterprise applications and software. The workshops were selected to complement the conference topics, leaving more time to researchers for brainstorming and then coming up, at the end of the workshops, with new research directions for the future. The goal of the workshop “Standards – a Foundation for Interoperability” is to increase awareness and understanding of interoperability standards as a fundamental need. The workshop “Use of MDI/SOA Concepts in Industry” promotes the application of MDI (Model-Driven Interoperability) combined with SOA (Services Oriented Architecture) and the associated technology (BPM, Enterprise Modeling, ontology, mediation, model transformation, etc.) in industry. The workshop on “Dynamic Management across Interoperating Enterprises” investigates the need for enhancements to current business management systems and processes to address the needs of global trading across enterprises utilizing the new service-oriented Internet. Finally, the Doctoral Symposium has given the opportunity for students involved in the preparation of their PhDs in this emerging area to present and discuss their research issues and ideas with senior researchers.
Download or read book Research in Interactive Design Vol 4 written by Xavier Fischer and published by Springer. This book was released on 2016-03-02 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering key topics in the field such as technological innovation, human-centered sustainable engineering and manufacturing, and manufacture at a global scale in a virtual world, this book addresses both advanced techniques and industrial applications of key research in interactive design and manufacturing. Featuring the full papers presented at the 2014 Joint Conference on Mechanical Design Engineering and Advanced Manufacturing, which took place in June 2014 in Toulouse, France, it presents recent research and industrial success stories related to implementing interactive design and manufacturing solutions.
Download or read book Advances in 3D Printing written by Ashutosh Sharma and published by BoD – Books on Demand. This book was released on 2023-05-03 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designing Apparel for Consumers written by M-E Faust and published by Woodhead Publishing. This book was released on 2014-04-03 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given its importance for consumer satisfaction and thus brand success, apparel fit is a major challenge for retailers and brands across the industry. Consequently there have been major developments in sizing research and how it can be used in apparel design. This book reviews how these developments are affecting clothing design for different groups of consumers.Part one identifies various aspects of body shape, size, volume and the psychological aspects of designing apparel. This section covers topics such as body shape and its influence on apparel size and consumer choices, sizing systems, body shape and weight distribution (with a discussion of the Body Volume Index (BVI) versus the Body Mass Index (BMI)), and the psychological and sociological factors influencing consumers’ choice of apparel. Part two outlines the challenges in understanding the sizing and shape requirements and choices of particular customer groups. This section discusses apparel designed for infants and children, older consumers, overweight and obese consumers, plus size Black and Latino women, apparel design for Asian and Caucasian ethnic groups, sizing requirements for male apparel, maternity apparel, intimate apparel for varying body shapes, and the challenges of designing headwear to fit the size and shape of Western and Asian populations.Designing apparel for consumers provides an invaluable reference for apparel designers, manufacturers, and R&D managers in the textile industry, as well as postgraduate students and academic researchers in textiles. Reviews developments affecting clothing design for different groups of consumers Identifies various aspects of body shape, size, volume and the psychological aspects of designing apparel Outlines the challenges in understanding sizing and shape requirements and choices of particular customer groups
Download or read book Apparel Manufacturing Technology written by T. Karthik and published by CRC Press. This book was released on 2016-08-05 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a broad conceptual and theoretical perspective of apparel manufacturing process starting from raw material selection to packaging and dispatch of goods. Further, engineering practices followed in an apparel industry for production planning and control, line balancing, implementation of industrial engineering concepts in apparel manufacturing, merchandising activities and garment costing have been included, and they will serve as a foundation for future apparel professionals. The book addresses the technical aspects in each section of garment manufacturing process with considered quality aspects. This book also covers the production planning process and production balancing activities. It addresses the technical aspects in each section of garment manufacturing process and quality aspects to be considered in each process. Garment engineering questions each process/operation of the total work content and can reduce the work content and increase profitability by using innovative methods of construction and technology. This book covers the production planning process, production balancing activities, and application of industrial engineering concepts in garment engineering. Further, the merchandising activities and garment costing procedures will deal with some practical examples. This book is primarily intended for textile technology and fashion technology students in universities and colleges, researchers, industrialists and academicians, as well as professionals in the apparel and textile industry.
Download or read book The Dirty Side of the Garment Industry written by Nikolay Anguelov and published by CRC Press. This book was released on 2015-09-04 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: When thinking about lowering or changing consumption to lower carbon footprints, the obvious offenders come easily to mind: petroleum and petroleum products, paper and plastic, even food. But not clothes. Although the clothing industry is the second largest polluter after agriculture, most consumers do not think of clothes as a source of environmen
Download or read book Reforming the UN System written by Carlos A. Magariños and published by BRILL. This book was released on 2021-10-01 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the rationale for and against multilateral development cooperation, with particular attention to international industrial development during the post-cold war era. It also documents how UNIDO has successfully transformed itself to contribute effectively to the global supply of international public goods within the purview of its mandate. A foreword by U.K. Secretary Clare Short illustrates the good reception that such transformation has elicited amongst the donor community as well as its demonstration and potential spillover effects on the whole of the UN system. The book, which contains testimonies of ambassadors of UNIDO's stakeholder countries as well as contributions by Messrs. J. D.-Martinussen, former Head of the Danish Mission for UNIDO's assessment, and R. Ricupero, Secretary-General of the United Nations Conference for Trade and Development (UNCTAD), can be expected to become an indispensable reference material for students of UN affairs and the international relations and development policy communities at large.