Download or read book Transfer of Pollution Prevention Technologies written by National Research Council and published by National Academies Press. This book was released on 2002-05-01 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The activities of the Department of Defense (DOD) and its contractors in manufacturing, testing, maintaining, and disposing of military equipment make up a significant portion of the industrial processes conducted in the United States. As is the case with the commercial industries, some of these activities, such as metal plating, have resulted in industrial pollution and environmental contamination. With increasing environmental regulation of such processes in recent decades, defense facilities have been faced with growing compliance issues. Department of Defense efforts to manage, correct, and prevent these problems have included the establishment of the National Defense Center for Environmental Excellence (NDCEE) under the management of the U.S. Army Industrial Ecology Center (IEC). The National Research Council's Committee to Evaluate Transfer of Pollution Prevention Technology for the U.S. Army was formed to identify major barriers to the transfer of pollution prevention technologies and to recommend pathways to success. To address the study objectives, the committee (1) reviewed the NDCEE's technology transfer activities, (2) examined efforts to transfer technology in four areas, two of which were identified at the outset by the NDCEE as successful and two of which were identified as unsuccessful, and (3) identified opportunities for improving the transfer of pollution prevention technologies to maintenance and rework facilities in the Department of Defense and to industrial manufacturing facilities performing defense-related operations.
Download or read book Transfer of Pollution Prevention Technologies written by National Research Council and published by National Academies Press. This book was released on 2002-04-01 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The activities of the Department of Defense (DOD) and its contractors in manufacturing, testing, maintaining, and disposing of military equipment make up a significant portion of the industrial processes conducted in the United States. As is the case with the commercial industries, some of these activities, such as metal plating, have resulted in industrial pollution and environmental contamination. With increasing environmental regulation of such processes in recent decades, defense facilities have been faced with growing compliance issues. Department of Defense efforts to manage, correct, and prevent these problems have included the establishment of the National Defense Center for Environmental Excellence (NDCEE) under the management of the U.S. Army Industrial Ecology Center (IEC). The National Research Council's Committee to Evaluate Transfer of Pollution Prevention Technology for the U.S. Army was formed to identify major barriers to the transfer of pollution prevention technologies and to recommend pathways to success. To address the study objectives, the committee (1) reviewed the NDCEE's technology transfer activities, (2) examined efforts to transfer technology in four areas, two of which were identified at the outset by the NDCEE as successful and two of which were identified as unsuccessful, and (3) identified opportunities for improving the transfer of pollution prevention technologies to maintenance and rework facilities in the Department of Defense and to industrial manufacturing facilities performing defense-related operations.
Download or read book Pollution Control Technology for Leachate from Municipal Solid Waste written by Zhao Youcai and published by Butterworth-Heinemann. This book was released on 2018-07-21 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution Control Technology for Leachate from Municipal Solid Waste explores the physical, chemical and biological factors that produce leachate and technological solutions for its control. The book introduces the integrated and pre-treatment leachate treatment processes that are necessary to deal with the variations of pollutants in leachate. Real world case-studies are provided to illustrate these treatment processes, along with leachate treatment engineering process design and the construction of municipal solid waste incinerator power plants. This book will be of particular interest to Civil, Chemical and Environmental Engineers, but will also be ideal for Environmental Scientists. - Provides quantity and quality prediction models, along with properties of effluent concentrated leachate liquid - Includes physical and chemical treatment processes for leachate, including ammonia nitrogen removal using struvite precipitation, crystal variation and microstructure of the struvite, etc. - Covers leachate treatment engineering processes for design and construction of treatment plants
Download or read book Pollution Control Technologies written by Swatantra P. Singh and published by Springer Nature. This book was released on 2021-06-17 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: p="" This monograph is based on pollution control technologies available to deal with water and air pollution. It includes removal of variety of pollutants including arsenic, chromium, uranium, pesticides and arsenic from water using adsorption technique. In addition, this book deals with the sampling and removal of microplastics using various techniques. The contents also focus on the role of membrane technology in water and wastewater treatment, and particulate matter air pollution and its control techniques. This volume will be a useful guide for researchers, academics and scientists. ^
Download or read book Handbook of Emergency Response to Toxic Chemical Releases written by Nicholas P. Cheremisinoff and published by Elsevier. This book was released on 1995-12-31 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook has been prepared as a working reference for the safety officer, the environmental engineer, and the consultant. For the safety officer, this handbook provides detailed guidelines and instructions in preparing Right-to-Know Reporting Audits, establishing programs and training employees on hazard awareness, and developing and implementing emergency response programs in the workplace and at off-site operations.For the environmental engineer, this handbook provides extensive technical data on toxic chemical properties and detailed instructional aid on how to properly prepare toxic chemical release inventory reporting.For the environmental consultant, an extensive overview of corrective action technologies is provided.
Download or read book Pollution Prevention and Control Technologies for Plating Operations written by and published by George Cushnie. This book was released on with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Air Pollution Control Technology Handbook written by Karl B. Schnelle, Jr. and published by CRC Press. This book was released on 2016-04-19 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the debate over pollution control, the price of pollution is a key issue. But which is more costly: clean up or prevention? From regulations to technology selection to equipment design, Air Pollution Control Technology Handbook serves as a single source of information on commonly used air pollution control technology. It covers environmental regulations and their history, process design, the cost of air pollution control equipment, and methods of designing equipment for control of gaseous pollutants and particulate matter. This book covers how to: Review alternative design methods Select methods for control Evaluate the costs of control equipment Examine equipment proposals from vendors With its comprehensive coverage of air pollution control processes, the Air Pollution Control Technology Handbook is a detailed reference for the practicing engineer who prepares the basic process engineering and cost estimation required for the design of an air pollution control system. It discusses the topics in depth so that you can apply the methods and equations presented and proceed with equipment design.
Download or read book The Legal Barriers to Technology Transfer under the UN Framework Convention on Climate Change written by Chen Zhou and published by Springer. This book was released on 2019-03-11 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses climate technology transfer under the UNFCCC framework, and China’s relevant legislation and practices. It first explores theoretical basis of climate change-related technology transfer, with a particular focus on the differences between climate technology transfer and business-as-usual performance. The book then reviews practices of both technology supplier and user, in order to generally identify potential legal barriers and obstacles. Finally, it sheds light on China, providing a comprehensive assessment on barriers that hinder the trans-boundary transfers of low carbon technologies and need to be overcome in future. The issues concerned involve two of the most dynamic areas in current China’s lawmaking progress: environment laws and Intellectual Property laws. The book provides an in-depth analysis on China’s legislation and practices in this regard. At international level, the legal framework of climate technology transfer is examined in a systematic, prudent and constructive manner. On this basis, the book highlights potential commons, consistency and possible coordination between the UNFCCC and the WTO regime. This book is accessible to both Chinese and international environmental law specialists. It appeals to a broad readership, including environmental scientists, economists concerned with China’s intellectual property law, foreign investment law and anyone interested in the topic: how to green intellectual property rights regime for climate technology transfer in the China context.
Download or read book Handbook of Pollution Prevention and Cleaner Production Vol 1 Best Practices in the Petroleum Industry written by Nicholas P Cheremisinoff and published by William Andrew. This book was released on 2009-09-22 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new Handbook provides a series of reference guides to cleaner production methods, technologies, and practices for key industry sectors. Each volume covers, for each industry sector: * the manufacturing technologies * waste management * pollution * methods for estimating and reporting emissions * treatment and control technologies * worker and community health risk exposures * cost data for pollution management * cleaner production and prevention alternatives Best Practices in The Petroleum Industry provides an overview of refineries and gas plant operations and identifies the key Environmental Aspects, supported by case studies of major incidents that resulted in catastrophic releases of oil and refined products, and a critical assessment of the methodology and calculation procedures that the industry relies on in preparing emissions inventories. The authors offer alternative approaches to providing more accurate emissions estimates, and guidelines on cleaner production and pollution prevention practices for improving overall environmental performance. - Overview of the key Environmental Aspects of gas plant operations and refineries - Case studies of major incidents that resulted in catastrophic releases of oil and refined products, including the Santa Barbara oil spill of 1969 and the EXXON Valdez incident - Provides guidelines on cleaner production and pollution prevention practices for improving overall environmental performance
Download or read book Technological Change and the Environment written by Arnulf Grübler and published by Routledge. This book was released on 2010-09-30 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much is written in the popular literature about the current pace of technological change. But do we have enough scientific knowledge about the sources and management of innovation to properly inform policymaking in technology dependent domains such as energy and the environment? While it is agreed that technological change does not 'fall from heaven like autumn leaves,' the theory, data, and models are deficient. The specific mechanisms that govern the rate and direction of inventive activity, the drivers and scope for incremental improvements that occur during technology diffusion, and the spillover effects that cross-fertilize technological innovations remain poorly understood. In a work that will interest serious readers of history, policy, and economics, the editors and their distinguished contributors offer a unique, single volume overview of the theoretical and empirical work on technological change. Beginning with a survey of existing research, they provide analysis and case studies in contexts such as medicine, agriculture, and power generation, paying particular attention to what technological change means for efficiency, productivity, and reduced environmental impacts. The book includes a historical analysis of technological change, an examination of the overall direction of technological change, and general theories about the sources of change. The contributors empirically test hypotheses of induced innovation and theories of institutional innovation. They propose ways to model induced technological change and evaluate its impact, and they consider issues such as uncertainty in technology returns, technology crossover effects, and clustering. A copublication o Resources for the Future (RFF) and the International Institute for Applied Systems Analysis (IIASA).
Download or read book Guide to Industrial Assessments for Pollution Prevention and Energy Efficiency written by and published by DIANE Publishing. This book was released on 2001 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pollution Control Technologies Volume II written by Bhaskar Nath and published by EOLSS Publications. This book was released on 2009-09-30 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution Control Technologies is a component of Encyclopedia of Environmental and Ecological Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The volume on Pollution Control Technologies focuses largely concerned with strategies for pollution reduction, and pollution prevention if at all possible, using scientific and technological methods. Focusing primarily but not exclusively on air pollution, the Theme is written in simple English, avoiding both mathematical and chemical equations as far as possible to facilitate effective and widest possible dissemination. The content of the Theme provides the essential aspects and a myriad of issues of great relevance to our world such as: Control of Particulate Matter in Gaseous Emissions; Control of Gaseous Emissions; Pollution Control through Efficient Combustion Technology; Pollution Control in Industrial Processes; Pollution Control in Transportation, which are then expanded into multiple subtopics, each as a chapter. These three volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs
Download or read book Pollution Control Technologies Volume III written by Bhaskar Nath and published by EOLSS Publications. This book was released on 2009-09-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution Control Technologies is a component of Encyclopedia of Environmental and Ecological Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Pollution Control Technologies focuses largely concerned with strategies for pollution reduction, and pollution prevention if at all possible, using scientific and technological methods. Focusing primarily but not exclusively on air pollution, the Theme is written in simple English, avoiding both mathematical and chemical equations as far as possible to facilitate effective and widest possible dissemination. The content of the Theme provides the essential aspects and a myriad of issues of great relevance to our world such as: Control of Particulate Matter in Gaseous Emissions; Control of Gaseous Emissions; Pollution Control through Efficient Combustion Technology; Pollution Control in Industrial Processes; Pollution Control in Transportation, which are then expanded into multiple subtopics, each as a chapter. These three volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs
Download or read book Pollution Prevention Research Strategy written by United States. Environmental Protection Agency. Office of Research and Development and published by DIANE Publishing. This book was released on 1998 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Air Pollution Control Equipment Selection Guide written by Kenneth C. Schifftner and published by CRC Press. This book was released on 2002-06-26 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection of air pollution control apparatus can be a daunting task even for experienced pollution control professionals. The Air Pollution Control Equipment Selection Guide eases the burden by providing extensive information on the best equipment available for any air pollution control problem. Instead of endorsing one technology over another, the author provides general information so that you can decide on the proper technology to use for any given application. The book offers ample introductory information including a helpful "Air Pollution 101" chapter that reviews the basics of air pollution control. The text is divided into sections that are organized by the primary technology employed, i.e., Quenching, Cooling, Particulate Removal, Gas Absorption, etc. This structure enables you to jump from section to section and quickly compare technologies. Each section defines the type of gas cleaning device, the basic physical forces used in it, its common sizes, and its most common uses. Many air pollution control problems are not solved with one type of device, but through using a variety of designs synergistically. To make this task easier, the author includes sections on each of these devices and notes where they are commonly used in concert with other equipment. Wherever possible, the text includes current photographs or drawings of typical equipment within that device type. Written in an easy to read style, Air Pollution Control Equipment Selection Guide serves as a technologically accurate reference that will facilitate the selection of air pollution control equipment for any operation.
Download or read book Proceedings of the 51st Purdue Industrial Waste Conference1996 Conference written by Purdue Research Foun and published by CRC Press. This book was released on 1997-05-01 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers presented at the 51st Purdue Industrial Waste Conference have been divided into the following sections: pollution prevention site remediation physical and chemical processes odor and VOC control solidification, foundry, and combustion residues biological processes respirometry and effluent toxicity industrial waste case histories Each chapter contains a multitude of figures and tables illustrating the concepts discussed as well as extensive references for further study.
Download or read book Environmental Technology Initiative written by United States. Environmental Protection Agency and published by . This book was released on 1997 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
