Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book An Introduction to Mechanical Engineering written by Jonathan Adam Wickert and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Machine Component Design written by Robert C. Juvinall and published by John Wiley & Sons. This book was released on 2020-06-23 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Machine Component Design presents a thorough introduction to the concepts and methods essential to mechanical engineering design, analysis, and application. In-depth coverage of major topics, including free body diagrams, force flow concepts, failure theories, and fatigue design, are coupled with specific applications to bearings, springs, brakes, clutches, fasteners, and more for a real-world functional body of knowledge. Critical thinking and problem-solving skills are strengthened through a graphical procedural framework, enabling the effective identification of problems and clear presentation of solutions. Solidly focused on practical applications of fundamental theory, this text helps students develop the ability to conceptualize designs, interpret test results, and facilitate improvement. Clear presentation reinforces central ideas with multiple case studies, in-class exercises, homework problems, computer software data sets, and access to supplemental internet resources, while appendices provide extensive reference material on processing methods, joinability, failure modes, and material properties to aid student comprehension and encourage self-study.
Download or read book Workshop Processes Practices and Materials written by Bruce Black and published by Routledge. This book was released on 2010-10-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Workshop Processes, Practices and Materials is an ideal introduction to workshop processes, practices and materials for entry-level engineers and workshop technicians. With detailed illustrations throughout and simple, clear language, this is a practical introduction to what can be a very complex subject. It has been significantly updated and revised to include new material on adhesives, protective coatings, plastics and current Health and Safety legislation. It covers all the standard topics, including safe practices, measuring equipment, hand and machine tools, materials and joining methods, making it an indispensable handbook for use both in class and the workshop. Its broad coverage makes it a useful reference book for many different courses worldwide.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques
Download or read book Index of International Standards written by Sophie J. Chumas and published by . This book was released on 1974 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Electric Drives and Electromechanical Systems written by Richard Crowder and published by Butterworth-Heinemann. This book was released on 2019-10-19 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Drives and Electromechanical Devices: Applications and Control, Second Edition, presents a unified approach to the design and application of modern drive system. It explores problems involved in assembling complete, modern electric drive systems involving mechanical, electrical, and electronic elements. This book provides a global overview of design, specification applications, important design information, and methodologies.This new edition has been restructured to present a seamless, logical discussion on a wide range of topical problems relating to the design and specification of the complete motor-drive system. It is organised to establish immediate solutions to specific application problem. Subsidiary issues that have a considerable impact on the overall performance and reliability, including environmental protection and costs, energy efficiency, and cyber security, are also considered. - Presents a comprehensive consideration of electromechanical systems with insights into the complete drive system, including required sensors and mechanical components - Features in-depth discussion of control schemes, particularly focusing on practical operation - Includes extensive references to modern application domains and real-world case studies, such as electric vehicles - Considers the cyber aspects of drives, including networking and security
Download or read book An Introduction to Predictive Maintenance written by R. Keith Mobley and published by Elsevier. This book was released on 2002-10-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Predictive Maintenance helps plant, process, maintenance and reliability managers and engineers to develop and implement a comprehensive maintenance management program, providing proven strategies for regularly monitoring critical process equipment and systems, predicting machine failures, and scheduling maintenance accordingly. Since the publication of the first edition in 1990, there have been many changes in both technology and methodology, including financial implications, the role of a maintenance organization, predictive maintenance techniques, various analyses, and maintenance of the program itself. This revision includes a complete update of the applicable chapters from the first edition as well as six additional chapters outlining the most recent information available. Having already been implemented and maintained successfully in hundreds of manufacturing and process plants worldwide, the practices detailed in this second edition of An Introduction to Predictive Maintenance will save plants and corporations, as well as U.S. industry as a whole, billions of dollars by minimizing unexpected equipment failures and its resultant high maintenance cost while increasing productivity. - A comprehensive introduction to a system of monitoring critical industrial equipment - Optimize the availability of process machinery and greatly reduce the cost of maintenance - Provides the means to improve product quality, productivity and profitability of manufacturing and production plants
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.
Download or read book Pump User s Handbook written by Heinz P. Bloch and published by The Fairmont Press, Inc.. This book was released on 2004 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simply put, this book explains what exactly needs to be done if a facility wants to progress from being a one, two or three year pump MTBF plant, and wishes to join the leading money-making facilities that today achieve a demonstrated pump MTBF of 8.6 years.
Download or read book Manual of Engineering Drawing written by Colin H. Simmons and published by Elsevier. This book was released on 2003-10-21 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Engineering Drawing has long been recognised as the student and practising engineer's guide to producing engineering drawings that comply with ISO and British Standards. The information in this book is equally applicable to any CAD application or manual drawing. The second edition is fully in line with the requirements of the new British Standard BS8888: 2002, and will help engineers, lecturers and students with the transition to the new standards.BS8888 is fully based on the relevant ISO standards, so this book is also ideal for an international readership. The comprehensive scope of this book encompasses topics including orthographic, isometric and oblique projections, electric and hydraulic diagrams, welding and adhesive symbols, and guidance on tolerancing.Written by a member of the ISO committee and a former college lecturer, the Manual of Engineering Drawing combines up-to-the-minute technical accuracy with clear, readable explanations and numerous diagrams. This approach makes this an ideal student text for vocational courses in engineering drawing and undergraduates studying engineering design / product design.Colin Simmons is a member of the BSI and ISO Draughting Committees and an Engineering Standards Consultant. He was formerly Standards Engineer at Lucas CAV.* Fully in line with the latest ISO Standards* A textbook and reference guide for students and engineers involved in design engineering and product design* Written by a former lecturer and a current member of the relevant standards committees
Download or read book Safety and Health in Construction written by International Labour Office and published by . This book was released on 1992 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: "It goes a long way in mapping out the agenda for health and safety professionals in this most dangerous and populous industry." Annals of Occupational Hygiene, Derby, United Kingdom Changes in working practices and conditions in the construction industry over the past decade have meant that the competent authorities, health and safety committees, management or employers' and workers' organizations, in particular, should take a fresh look at such aspects as the safety of workplaces, health hazards, and construction equipment and machinery. This code of practice takes account of new areas in the sector which require improved health and safety practices and other protective measures.
Download or read book Tribology written by and published by . This book was released on 1985 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Component Design written by Robert C. Juvinall and published by John Wiley & Sons. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
