Download or read book Engineering and Design Structural Deformation Surveying Engineer Manual Em 1110 2 1009 written by and published by . This book was released on 2002-06-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides technical guidance for performing precise structural deformation surveys of locks, dams, and other hydraulic flood control or navigation structures. Accuracy, procedural, and quality control standards are defined for monitoring displacements in hydraulic structures.
Download or read book Track Design Handbook for Light Rail Transit written by and published by Transportation Research Board. This book was released on 2012 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: TCRP report 155 provides guidelines and descriptions for the design of various common types of light rail transit (LRT) track. The track structure types include ballasted track, direct fixation ("ballastless") track, and embedded track. The report considers the characteristics and interfaces of vehicle wheels and rail, tracks and wheel gauges, rail sections, alignments, speeds, and track moduli. The report includes chapters on vehicles, alignment, track structures, track components, special track work, aerial structures/bridges, corrosion control, noise and vibration, signals, traction power, and the integration of LRT track into urban streets.
Download or read book Strengthening Forensic Science in the United States written by National Research Council and published by National Academies Press. This book was released on 2009-07-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scores of talented and dedicated people serve the forensic science community, performing vitally important work. However, they are often constrained by lack of adequate resources, sound policies, and national support. It is clear that change and advancements, both systematic and scientific, are needed in a number of forensic science disciplines to ensure the reliability of work, establish enforceable standards, and promote best practices with consistent application. Strengthening Forensic Science in the United States: A Path Forward provides a detailed plan for addressing these needs and suggests the creation of a new government entity, the National Institute of Forensic Science, to establish and enforce standards within the forensic science community. The benefits of improving and regulating the forensic science disciplines are clear: assisting law enforcement officials, enhancing homeland security, and reducing the risk of wrongful conviction and exoneration. Strengthening Forensic Science in the United States gives a full account of what is needed to advance the forensic science disciplines, including upgrading of systems and organizational structures, better training, widespread adoption of uniform and enforceable best practices, and mandatory certification and accreditation programs. While this book provides an essential call-to-action for congress and policy makers, it also serves as a vital tool for law enforcement agencies, criminal prosecutors and attorneys, and forensic science educators.
Download or read book Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects written by United States. Federal Highway Administration and published by . This book was released on 1985 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of 5th International Conference on the Industry 4 0 Model for Advanced Manufacturing written by Lihui Wang and published by Springer Nature. This book was released on 2020-05-15 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2020), held in Belgrade, Serbia, on 1–4 June 2020. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of manufacturing. The book addresses a wide range of topics, including: design of smart and intelligent products, developments in CAD/CAM technologies, rapid prototyping and reverse engineering, multistage manufacturing processes, manufacturing automation in the Industry 4.0 model, cloud-based products, and cyber-physical and reconfigurable manufacturing systems. By providing updates on key issues and highlighting recent advances in manufacturing engineering and technologies, the book supports the transfer of vital knowledge to the next generation of academics and practitioners. Further, it will appeal to anyone working or conducting research in this rapidly evolving field.
Download or read book Technical Drawing for Product Design written by Stefano Tornincasa and published by Springer Nature. This book was released on 2020-11-23 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for students, academics, designers, process engineers and CMM operators, and presents the ISO GPS and the ASME GD&T rules and concepts. The Geometric Product Specification (GPS) and Geometrical Dimensioning and Tolerancing (GD&T) languages are in fact the most powerful tools available to link the perfect geometrical world of models and drawings to the imperfect world of manufactured parts and assemblies. The topics include a complete description of all the ISO GPS terminology, datum systems, MMR and LMR requirements, inspection, and gauging principles. Moreover, the differences between ISO GPS and the American ASME Y14.5 standards are shown as a guide and reference to help in the interpretation of drawings of the most common dimensioning and tolerancing specifications.The book may be used for engineering courses and for professional grade programmes, and it has been designed to cover the fundamental geometric tolerancing applications as well as the more advanced ones. Academics and professionals alike will find it to be an excellent teaching and research tool, as well as an easy-to-use guide.
Download or read book GB T 41103 2022 Translated English of Chinese Standard GB T 41103 2022 GBT41103 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-01-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the dimensional and geometric properties, nominal dimensions and tolerance values of finished silicon nitride cylindrical rollers for rolling bearings. This document is applicable to the production, inspection and acceptance of ceramic cylindrical rollers for rolling bearings. Annexes A and B give the specifications and grouping principles of roller diameter and roller length respectively. Annex B also gives roller length tolerances. Annex C gives examples of roller imperfection types and inspection methods.
Download or read book Suspension Geometry and Computation written by John C. Dixon and published by John Wiley & Sons. This book was released on 2009-10-27 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revealing suspension geometry design methods in unique detail, John Dixon shows how suspension properties such as bump steer, roll steer, bump camber, compliance steer and roll centres are analysed and controlled by the professional engineer. He emphasizes the physical understanding of suspension parameters in three dimensions and methods of their calculation, using examples, programs and discussion of computational problems. The analytical and design approach taken is a combination of qualitative explanation, for physical understanding, with algebraic analysis of linear and non-linear coefficients, and detailed discussion of computer simulations and related programming methods. Includes a detailed and comprehensive history of suspension and steering system design, fully illustrated with a wealth of diagrams Explains suspension characteristics and suspension geometry coefficients, providing a unique and in-depth understanding of suspension design not found elsewhere. Describes how to obtain desired coefficients and the limitations of particular suspension types, with essential information for suspension designers, chassis technicians and anyone else with an interest in suspension characteristics and vehicle dynamics. Discusses the use of computers in suspension geometry analysis, with programming techniques and examples of suspension solution, including advanced discussion of three-dimensional computational geometry applied to suspension design. Explains in detail the direct and iterative solutions of suspension geometry.
Download or read book Spacecraft Attitude Determination and Control written by J.R. Wertz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: Roger D. Werking Head, Attitude Determination and Control Section National Aeronautics and Space Administration/ Goddard Space Flight Center Extensiye work has been done for many years in the areas of attitude determination, attitude prediction, and attitude control. During this time, it has been difficult to obtain reference material that provided a comprehensive overview of attitude support activities. This lack of reference material has made it difficult for those not intimately involved in attitude functions to become acquainted with the ideas and activities which are essential to understanding the various aspects of spacecraft attitude support. As a result, I felt the need for a document which could be used by a variety of persons to obtain an understanding of the work which has been done in support of spacecraft attitude objectives. It is believed that this book, prepared by the Computer Sciences Corporation under the able direction of Dr. James Wertz, provides this type of reference. This book can serve as a reference for individuals involved in mission planning, attitude determination, and attitude dynamics; an introductory textbook for stu dents and professionals starting in this field; an information source for experimen ters or others involved in spacecraft-related work who need information on spacecraft orientation and how it is determined, but who have neither the time nor the resources to pursue the varied literature on this subject; and a tool for encouraging those who could expand this discipline to do so, because much remains to be done to satisfy future needs.
Download or read book Aeronautical Engineer s Data Book written by Cliff Matthews and published by Elsevier. This book was released on 2001-10-17 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeronautical Engineer's Data Bookis an essential handy guide containing useful up to date information regularly needed by the student or practising engineer. Covering all aspects of aircraft, both fixed wing and rotary craft, this pocket book provides quick access to useful aeronautical engineering data and sources of information for further in-depth information. - Quick reference to essential data - Most up to date information available
Download or read book Superpave Mix Design written by Asphalt Institute and published by . This book was released on 2001-01-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering and Design written by Us Army Corps Of Engineers and published by Military Bookshop. This book was released on 1995-06 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides guidance on evaluating the condition of the concrete in a structure, relating the condition of the concrete to the underlying cause or causes of that condition, selecting an appropriate repair material and method for any deficiency found, and using the selected materials and methods to repair or rehabilitate the structure. Guidance is also included on maintenance of concrete and on preparation of concrete investigation reports for repair and rehabilitation projects. Considerations for certain specialized types of rehabilitation projects are also given.
Download or read book FRA Guide for Preparing Accidents incidents Reports written by United States. Federal Railroad Administration. Office of Safety and published by . This book was released on 1992 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earth and Rock Fill Dams written by U. S. Army Corps of Engineers and published by . This book was released on 2004-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents fundamental principles underlying the design and construction of earth and rock-fill dams. The general principles presented herein are also applicable to the design and construction of earth levees.
Download or read book Manual of Engineering Drawing written by Colin H. Simmons and published by Elsevier. This book was released on 2003-10-21 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Engineering Drawing has long been recognised as the student and practising engineer's guide to producing engineering drawings that comply with ISO and British Standards. The information in this book is equally applicable to any CAD application or manual drawing. The second edition is fully in line with the requirements of the new British Standard BS8888: 2002, and will help engineers, lecturers and students with the transition to the new standards.BS8888 is fully based on the relevant ISO standards, so this book is also ideal for an international readership. The comprehensive scope of this book encompasses topics including orthographic, isometric and oblique projections, electric and hydraulic diagrams, welding and adhesive symbols, and guidance on tolerancing.Written by a member of the ISO committee and a former college lecturer, the Manual of Engineering Drawing combines up-to-the-minute technical accuracy with clear, readable explanations and numerous diagrams. This approach makes this an ideal student text for vocational courses in engineering drawing and undergraduates studying engineering design / product design.Colin Simmons is a member of the BSI and ISO Draughting Committees and an Engineering Standards Consultant. He was formerly Standards Engineer at Lucas CAV.* Fully in line with the latest ISO Standards* A textbook and reference guide for students and engineers involved in design engineering and product design* Written by a former lecturer and a current member of the relevant standards committees
Download or read book The Performance Economy written by W. Stahel and published by Springer. This book was released on 2010-02-24 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and revised edition outlines strategies and models for how to use technology and knowledge to improve performance, create jobs and increase income. It shows what skills will be required to produce, sell and manage performance over time, and how manual jobs can contribute to reduce the consumption of non-renewable resources.
Download or read book Proof Rolling of Foundation Soil and Prepared Subgrade During Construction written by Phillip Dunston and published by . This book was released on 2018-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: 16. AbstractProof rolling provides a method to examine the entire subgrade surface as a compliment to standard random acceptance testing. Proof rolling requires established criteria that account for the interplay of equipment parameters and soil characteristics, technique, and other specifics of the project to allow for proper interpretation. The researchers concluded that proof rolling is not appropriate for determining soil elastic properties, while it can reveal in situ strength properties. No information from state highway agencies (SHA) publications or interviews reports using proof rolling other than for the evaluation of the subgrade. Only eight SHA¿s have notable specifications or other supporting documents containing significant guidance or criteria. The requirements provided for use of either of two equipment types¿tandem-axle rear dump trucks and chariot-style rollers¿and a range of evaluation criteria based on soil type and whether the project is new construction or re-construction. Recommendations provided fall within parameters practiced by states that have the most well-developed specifications and practices for proof rolling. The recommendations include: evaluation is of the subgrade only and the equipment shall be either a tandem-axle rear dump truck or a tri-axle rear dump truck (with raised third axle) loaded to a minimum gross weight of 20 tons. The chariot-style roller loaded to a minimum gross weight of 40 tons could be alternatively specified. The test shall be a single pass in each traffic lane with the passing criteria of a 1¿ deflection for new construction and 1⁄2¿ deflection for re-constructed or stabilized subgrade, as well as the absence of pumping and cracking.
