Download or read book Tracer Diffusion Data for Metals Alloys and Simple Oxides written by John Askill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic diffusion in metals was first discovered some sixty-five years ago, and since then a considerable wealth of data has ac cumulated on diffusion in various systems. However, work prior to about the year 1940 is now mainly of historical interest, since ex periments were often carried out under experimental conditions and with methods of analysis leading to uncertainties in inter preting the measured diffusion coefficients. Data on diffusion rates are of importance in processes which are controlled by rates of atomic migration such as growth of phases and homogenization of alloys. In addition diffusion plays an important part in theories of such phenomena as oxidation, plastic deformation, sintering, and creep. A tremendous advance in diffusion studies was made possible by the availability of radioactive isotopes of sufficiently high spe cific activity after the second world war. Measurements of self diffusion rates then became possible using radioactive isotopes having the same chemical properties as the solvent material, and it also became possible to study tracer impurity diffusion when the concentration of the impurity is so small as not to alter the chemi cal homogeneity of the system. In the last ten to fifteen years the purity of materials used in diffusion studies has increased con siderably and the methods of analysis have become more stand ardized.
Download or read book Tracer Dffusion Data for Metals Alloys and Simple Oxides written by John Askill and published by . This book was released on 1970 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Bibliography on Tracer Diffusion in Metals written by and published by . This book was released on 1968 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bibliography of Mass Spectroscopy Literature for 1970 written by and published by . This book was released on 1972 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 4th World Congress on Integrated Computational Materials Engineering ICME 2017 written by Paul Mason and published by Springer. This book was released on 2017-04-27 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a collection of papers presented at the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017), a specialty conference organized by The Minerals, Metals & Materials Society (TMS). The contributions offer topics relevant to the global advancement of ICME as an engineering discipline. Topics covered include the following:ICME Success Stories and ApplicationsVerification, Validation, Uncertainty Quantification Issues and Gap AnalysisIntegration Framework and UsageAdditive ManufacturingPhase Field ModelingMicrostructure EvolutionICME Design Tools and ApplicationMechanical Performance Using Multi-Scale Modeling
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976-02 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solder Joint Reliability written by John H. Lau and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solders have given the designer of modern consumer, commercial, and military electronic systems a remarkable flexibility to interconnect electronic components. The properties of solder have facilitated broad assembly choices that have fueled creative applications to advance technology. Solder is the electrical and me chanical "glue" of electronic assemblies. This pervasive dependency on solder has stimulated new interest in applica tions as well as a more concerted effort to better understand materials properties. We need not look far to see solder being used to interconnect ever finer geo metries. Assembly of micropassive discrete devices that are hardly visible to the unaided eye, of silicon chips directly to ceramic and plastic substrates, and of very fine peripheral leaded packages constitute a few of solder's uses. There has been a marked increase in university research related to solder. New electronic packaging centers stimulate applications, and materials engineering and science departments have demonstrated a new vigor to improve both the materials and our understanding of them. Industrial research and development continues to stimulate new application, and refreshing new packaging ideas are emerging. New handbooks have been published to help both the neophyte and seasoned packaging engineer.
Download or read book Proceedings written by Murray L. Scott and published by Woodhead Publishing. This book was released on 1997 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diffusion in Solids written by Martin Eden Glicksman and published by John Wiley & Sons. This book was released on 2022-09-14 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a modern treatment of diffusion in solids, covering such core topics as the transport of mass through the lattice of a crystalline solid. Part I of the book develops basic concepts in diffusion field theory and illustrates them with several applications, while Part II focuses on key solid-state principles needed to apply diffusion theory to real materials.
Download or read book Magnesium Technology 2015 written by Michele Manuel and published by Springer. This book was released on 2016-12-26 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2015 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Materials and Processes for Surface and Interface Engineering written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Processes for Surface and Interface Engineering, which has been written by experts in the fields of deposition technology and surface modification techniques, offers up to date tutorial papers on the latest advances in surface and interface engineering. The emphasis is on fundamental aspects, principles and applications of plasma and ion beam processing technology. A handbook for the engineer and scientist as well as an introduction for students in several branches of materials science and surface engineering.
Download or read book Metal Impurities in Silicon and Germanium Based Technologies written by Cor Claeys and published by Springer. This book was released on 2018-08-13 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unique review of various aspects of metallic contamination in Si and Ge-based semiconductors. It discusses all of the important metals including their origin during crystal and/or device manufacturing, their fundamental properties, their characterization techniques and their impact on electrical devices’ performance. Several control and possible gettering approaches are addressed. The book offers a valuable reference guide for all researchers and engineers studying advanced and state-of-the-art micro- and nano-electronic semiconductor devices and circuits. Adopting an interdisciplinary approach, it combines perspectives from e.g. material science, defect engineering, device processing, defect and device characterization, and device physics and engineering.
Download or read book Sintering and Heterogeneous Catalysis written by G. Kuczynski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sixth International Conference on Sintering and Related Phenomena took place at the University of Notre Dame, Notre Dame, Indiana June 6-8, 1983. This conference was also the twentieth Conference on Ceramic Sciences organized yearly by a "confederation" of four institutions: North Carolina University at Raleigh, N.C., the University of California at Berkeley, CA, Alfred University at Alfred, NY and the University of Notre Dame, Notre Dame, IN. The papers presented at the last Notre Dame conference collect ed in this volume, reflect the progress in our understanding of the process of sintering achieved in the past four years. It seems that the analysis of the two particle models is finally extended to the analysis of the models of compacts. In these investigations strong emphasis is put on pore-grain boundar ies interaction which appear to be central to this problem. It is to be hoped that in the near future an adequate model of the compact will be developed which may serve as a useful basis of powder tech nology. Also, the effects of atmosphere on the sintering of ceramics after a long period of neglect, seem to attract the attention of more workers in the field.
Download or read book Zentropy written by Zi-Kui Liu and published by CRC Press. This book was released on 2024-08-23 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles selected publications authored or co-authored by the editor to present a comprehensive understanding of following topics: (1) density functional theory and CALPHAD modeling; (2) computational tools; and (3) applications of computational thermodynamics. It is noted that while entropy at one scale is well represented by standard statistical mechanics in terms of probability of individual configurations at that scale, the theory capable of counting total entropy of a system from different scales is lacking. The zentropy theory provides a nested form for configurational entropy enabling multiscale modeling to account for disorder and fluctuations from the electronic scale based on quantum mechanics to the experimental scale based on statistical mechanics using free energies of individual configurations rather than their total energies in standard statistical mechanics. The predictions from the zentropy theory demonstrate remarkable agreements with experimental observations for magnetic transitions and associated emergent behaviors of strongly correlated metals and oxides, including singularity and instability at critical points and positive and negative thermal expansions, without the need of additional truncated models and fitting model parameters beyond density function theory. This paves the way to provide the predicted phase equilibrium data for high throughput predictive CALPHAD modeling of complex material systems, and those individual configurations may thus be considered as the genomic building blocks of individual phases in the spirit of Materials Genome®.
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. - Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases - Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys - Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book December 16 written by Görlich and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-11-22 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: No detailed description available for "December 16".
Download or read book Mass Transport in Solids and Fluids written by David S. Wilkinson and published by Cambridge University Press. This book was released on 2000-11-02 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of matter transport is central to understanding the processing of materials and their subsequent mechanical properties. While thermodynamics determines the final state of a material system, it is the kinetics of mass transport that governs how it gets there. This book, first published in 2000, gives a solid grounding in the principles of matter transport and their application to a range of engineering problems. The author develops a unified treatment of mass transport applicable to both solids and liquids. Traditionally matter transport in fluids is considered as an extension of heat transfer and can appear to have little relationship to diffusion in solids. This unified approach clearly makes the connection between these important fields. This book is aimed at advanced undergraduate and beginning graduate students of materials science and engineering and related disciplines. It contains numerous worked examples and unsolved problems. The material can be covered in a one semester course.
