Download or read book Towards a Unified Fatigue Life Prediction Method for Marine Structures written by Weicheng Cui and published by Springer. This book was released on 2014-11-04 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to apply the damage tolerance design philosophy to design marine structures, accurate prediction of fatigue crack growth under service conditions is required. Now, more and more people have realized that only a fatigue life prediction method based on fatigue crack propagation (FCP) theory has the potential to explain various fatigue phenomena observed. In this book, the issues leading towards the development of a unified fatigue life prediction (UFLP) method based on FCP theory are addressed. Based on the philosophy of the UFLP method, the current inconsistency between fatigue design and inspection of marine structures could be resolved. This book presents the state-of-the-art and recent advances, including those by the authors, in fatigue studies. It is designed to lead the future directions and to provide a useful tool in many practical applications. It is intended to address to engineers, naval architects, research staff, professionals and graduates engaged in fatigue prevention design and survey of marine structures, in fatigue studies of materials and structures, in experimental laboratory research, in planning the repair and maintenance of existing structures, and in rule development. The book is also an effective educational aid in naval architecture, marine, civil and mechanical engineering. Prof. Weicheng Cui is the Dean of Hadal Science and Technology Research Center of Shanghai Ocean University, China. Dr. Xiaoping Huang is an associate professor of School of Naval Architecture, Ocean and Civil Engineering of Shanghai Jiao Tong University, China. Dr. Fang Wang is an associate professor of Hadal Science and Technology Research Center of Shanghai Ocean University, China.
Download or read book Metallic Biomaterials Processing and Medical Device Manufacturing written by Cuie Wen and published by Woodhead Publishing. This book was released on 2020-08-20 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Biomaterials Processing and Medical Device Manufacturing details the principles and practices of the technologies used in biomaterials processing and medical device manufacturing. The book reviews the main categories of metallic biomaterials and the essential considerations in design and manufacturing of medical devices. It bridges the gap between the designing of biomaterials and manufacturing of medical devices including requirements and standards. Main themes of the book include, manufacturing, coatings and surface modifications of medical devices, metallic biomaterials and their mechanical behaviour, degradation, testing and characterization, and quality controls, standards and FDA regulations of medical devices. The leading experts in the filed discuss the requirements, challenges, recent progresses and future research directions in the processing of materials and manufacturing of medical devices. Metallic Biomaterials Processing and Medical Device Manufacturing is ideal for those working in the disciplines of materials science, manufacturing, biomedical engineering, and mechanical engineering. Reviews key topics of biomaterials processing for medical device applications including metallic biomaterials and their mechanical behavior, degradation, testing and characterization Bridges the gap between biomaterials design and medical device manufacturing Discusses the quality controls, standards, and FDA requirements for biomaterials and medical devices
Download or read book Progress in the Analysis and Design of Marine Structures written by Carlos Guedes Soares and published by CRC Press. This book was released on 2017-04-28 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in the Analysis and Design of Marine Structures collects the contributions presented at MARSTRUCT 2017, the 6th International Conference on Marine Structures (Lisbon, Portugal, 8-10 May 2017). The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, and the fifth in Southampton, UK in March 2015. This Conference series deals with Ship and Offshore Structures, addressing topics in the areas of: - Methods and Tools for Loads and Load Effects - Methods and Tools for Strength Assessment - Experimental Analysis of Structures - Materials and Fabrication of Structures - Methods and Tools for Structural Design and Optimisation, and - Structural Reliability, Safety and Environmental Protection Progress in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures.
Download or read book Design and Modeling of Mechanical Systems V written by Lassaad Walha and published by Springer Nature. This book was released on 2022-08-19 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 9th International Congress on Design and Modeling of Mechanical Systems (CMSM’2021), held on December 20-22, 2021, in Hammamet, Tunisia. It reports on research findings, advanced methods and industrial applications relating to mechanical systems, materials and structures, and machining. It covers vibration analysis, CFD modeling and simulation, intelligent monitoring and control, including applications related to industry 4.0 and additive manufacturing. Continuing on the tradition of the previous editions, and with a good balance of theory and practice, the book offers a timely snapshot, and a useful resource for both researchers and professionals in the field of design and modeling of mechanical systems.
Download or read book Industrial Mechanical and Manufacturing Science written by Dawei Zheng and published by CRC Press. This book was released on 2015-02-25 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains selected papers presented at the 2014 International Conference on Industrial, Mechanical and Manufacturing Science, held in Tianjin, China. Contributions cover the latest developments and advances in the field of Industrial, Mechanical and Manufacturing Science.
Download or read book Handbook of Structural Life Assessment written by Raouf A. Ibrahim and published by John Wiley & Sons. This book was released on 2017-04-17 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important, self-contained reference deals with structural life assessment (SLA) and structural health monitoring (SHM) in a combined form. SLA periodically evaluates the state and condition of a structural system and provides recommendations for possible maintenance actions or the end of structural service life. It is a diversified field and relies on the theories of fracture mechanics, fatigue damage process, and reliability theory. For common structures, their life assessment is not only governed by the theory of fracture mechanics and fatigue damage process, but by other factors such as corrosion, grounding, and sudden collision. On the other hand, SHM deals with the detection, prediction, and location of crack development online. Both SLA and SHM are combined in a unified and coherent treatment.
Download or read book Fatigue Design of Marine Structures written by Inge Lotsberg and published by Cambridge University Press. This book was released on 2016-04-13 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a theoretical and practical guide for fatigue design of marine structures including sailing ships and offshore oil structures.
Download or read book Analysis and Design of Marine Structures V written by C. Guedes Soares and published by CRC Press. This book was released on 2015-03-11 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Design of Marine Structures V contains the papers presented at MARSTRUCT 2015, the 5th International Conference on Marine Structures (Southampton, UK, 25-27 March 2015). The MARSTRUCT series of conferences started in Glasgow, UK in 2007, the second event of the series took place in Lisbon, Portugal (2009), while the third was in Hambur
Download or read book Essentials of Applied Dynamic Analysis written by Junbo Jia and published by Springer Science & Business Media. This book was released on 2014-01-09 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents up-to-date knowledge of dynamic analysis in engineering world. To facilitate the understanding of the topics by readers with various backgrounds, general principles are linked to their applications from different angles. Special interesting topics such as statistics of motions and loading, damping modeling and measurement, nonlinear dynamics, fatigue assessment, vibration and buckling under axial loading, structural health monitoring, human body vibrations, and vehicle-structure interactions etc., are also presented. The target readers include industry professionals in civil, marine and mechanical engineering, as well as researchers and students in this area.
Download or read book Proceedings of the 15th International Ship and Offshore Structures Congress written by A.E Mansour and published by Elsevier. This book was released on 2003-06-26 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: KEY FEATURES: Provides researchers in Ocean engineering with a thorough review of the latest research in the field Lengthy reports by leading experts A valuable resource for all interested in ocean engineering DESCRIPTION: The International Ship and Offshore Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research. These three volumes contain the eight technical committee reports, six Specialist Committee and 2 Special Task Committee reports which were presented for the 15th International Ship and Offshore Structures Congress (ISSC 2004) in San Diego USA, between 11th and 15th August 2003. Volume III will be published in 2004 and is to contain the discussion of the reports, the chairmen's reply, the text of the invited Lecture and the congress report of ISSC 2003.
Download or read book Condition Assessment of Aged Structures written by J K Paik and published by Elsevier. This book was released on 2014-01-23 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any structural system in service is subject to age-related deterioration, leading to potential concerns regarding maintenance, health & safety, environmental and economic implications. Condition assessment of aged structures is an invaluable, single source of information on structural assessment techniques for marine and land-based structures such as ships, offshore installations, industrial plant and buildings. Topics covered include: - Current practices and standards for structural condition assessment - Fundamental mechanisms and advanced mathematical methods for predicting structural deterioration - Residual strength assessment of deteriorated structures - Inspection and maintenance of aged structures - Reliability and risk assessment of aged structures Professionals from a broad range of disciplines will be able to gain a better understanding of current practices and standards for structural condition assessment or health monitoring, and what future trends might be. Single source of information on structural assessment techniques for marine and land-based structures Examines the residual strength and reliability of aged structures Assesses current practices covering inspection, health monitoring and maintenance
Download or read book Fatigue Life Prediction of Composites and Composite Structures written by Anastasios P. Vassilopoulos and published by Woodhead Publishing. This book was released on 2019-10-08 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Life Prediction of Composites and Composite Structures, Second Edition, is a comprehensive review of fatigue damage and fatigue life modeling and prediction methodologies for composites and their use in practice. In this new edition, existing chapters are fully updated, while new chapters are introduced to cover the most recent developments in the field. The use of composites is growing in structural applications in many industries, including aerospace, marine, wind turbine and civil engineering. However, there are uncertainties about their long-term performance, including performance issues relating to cyclic fatigue loading that hinder the adoption of a commonly accepted credible fatigue design methodology for the life prediction of composite engineering structures. With its distinguished editor and international team of contributors, this book is a standard reference for industry professionals and researchers alike. Examines past, present and future trends associated with the fatigue life prediction of composite materials and structures Assesses novel computational methods for fatigue life modeling and prediction of composite materials under constant amplitude loading Covers a wide range of techniques for predicting fatigue, including their theoretical background and practical applications Addresses new topics and covers contemporary research developments in the field
Download or read book Sustainable Development and Innovations in Marine Technologies written by Petar Georgiev and published by CRC Press. This book was released on 2019-08-22 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Development and Innovations in Marine Technologies includes the papers presented at the 18th International Congress of the Maritime Association of the Mediterranean (IMAM 2019, Varna, Bulgaria, 9-11 September 2019). Sustainable Development and Innovations in Marine Technologies includes a wide range of topics: Aquaculture & Fishing; Construction; Defence & Security; Design; Dynamic response of structures; Degradation/ Defects in structures; Electrical equipment of ships; Human factors; Hydrodynamics; Legal/Social aspects; Logistics; Machinery & Control; Marine environmental protection; Materials; Navigation; Noise; Non-linear motions – manoeuvrability; Off-shore and coastal development; Off-shore renewable energy; Port operations; Prime movers; Propulsion; Safety at sea; Safety of Marine Systems; Sea waves; Seakeeping; Shaft & propellers; Ship resistance; Shipyards; Small & pleasure crafts; Stability; Static response of structures; Structures, and Wind loads. The IMAM series of Conferences started in 1978 when the first Congress was organised in Istanbul, Turkey. IMAM 2019 is the eighteenth edition, and in its nearly forty years of history, this biannual event has been organised throughout Europe. Sustainable Development and Innovations in Marine Technologies is essential reading for academics, engineers and all professionals involved in the area of sustainable and innovative marine technologies.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ships and Offshore Structures XIX written by Carlos Guedes Soares and published by CRC Press. This book was released on 2015-09-03 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume work presents the proceedings from the 19th International Ship and Offshore Structures Congress held in Cascais, Portugal on 7th to 10th September 2015. The International Ship and Offshore Structures Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research.The aim of
Download or read book Mechanical Vibration and Shock Analysis Fatigue Damage written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2014-05-12 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also used for a specification representing the effects produced by the set of vibrations imposed in a real environment. In this volume, which is devoted to the calculation of fatigue damage, Christian Lalanne explores the hypotheses adopted to describe the behavior of material affected by fatigue and the laws of fatigue accumulation. The author also considers the methods for counting response peaks, which are used to establish the histogram when it is not possible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested.
Download or read book Damage Characterisation and Lifetime Prediction of Bonded Joints Under Variable Amplitude Fatigue Loading written by Vikram Shenoy and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive bonding is one of the most attractive joining techniques for any structural application, including high profile examples in the aerospace, automotive, marine construction and electrical industries. Advantages of adhesive bonding include; superior fatigue performance, better stress distribution and higher stiffness than conventional joining techniques. When the design of bonded joints is considered, fatigue is of critical importance in most structural applications. There are two main issues that are of importance; a) in-service damage characterisation during fatigue loading and, b) lifetime prediction under both constant and variable amplitude fatigue loading. If fatigue damage characterisation is considered, there has been some work to characterise damage in-situ using the backface strain (BFS) measurement technique, however, there has been little investigation of the effects of different types of fatigue behaviour under different types of geometry and loading. Regarding fatigue lifetime prediction of bonded joints, most of the work in the literature is concentrated with constant amplitude fatigue, rather than variable amplitude fatigue. Fatigue design of a bonded structure based on constant amplitude fatigue, when the actual loading on the structure is of the variable amplitude fatigue, can result in erroneous lifetime prediction. This is because of load interaction effects caused by changes in load ratio, mean load etc., which can decrease the fatigue life considerably. Therefore, the project aims to a) provide a comprehensive study of the use of BFS measurements to characterise fatigue damage, b) develop novel techniques for predicting lifetime under constant amplitude fatigue and c) provide an insight into various types of load interaction effects. In this project, single lap joints (SLJ) and compound double cantilever beam geometries were used. Compound double cantilever beams were used mainly to determine the critical strain energy release rate and to obtain the relationship between strain energy release rate and fatigue crack growth rate. The fatigue life of SLJs was found to be dominated by crack initiation at lower fatigue loads. At higher fatigue loads, fatigue life was found to consist of three phases; initiation, stable crack propagation and fast crack growth. Using these results, a novel damage progression model was developed, which can be used to predict the remaining life of a bonded structure. A non-linear strength wearout model (NLSWM) was also proposed, based on strength wearout experiments, where a normalised strength wearout curve was found to be independent of the fatigue load applied. In this model, an empirical parameter determined from a small number of experiments, can be used to determine the residual strength and remaining life of a bonded structure. A fracture mechanics approach based on the Paris law was also used to predict the fatigue lifetime under constant amplitude fatigue. This latter method was found to under-predict the fatigue life, especially at lower fatigue loads, which was attributed to the absence of a crack initiation phase in the fracture mechanics based approach. A damage mechanics based approach, in which a damage evolution law was proposed based on plastic strain, was found to predict the fatigue life well at both lower and higher fatigue loads. This model was able to predict both initiation and propagation phases. Based on the same model, a unified fatigue methodology (UFM) was proposed, which can be used to not only predict the fatigue lifetime, but also various other fatigue parameters such as BFS, strength wearout and stiffness wearout. The final part of the project investigated variable amplitude fatigue. In this case, fatigue lifetime was found to decrease, owing to damage and crack growth acceleration in various types of variable amplitude fatigue loading spectra. A number of different strength wearout approaches were proposed to predict fatigue lifetime under variable amplitude fatigue loading. The NLSWM, where no interaction effects were considered was found to over-predict the fatigue life, especially at lower fatigue loads. However, approaches such as the modified cycle mix and normalised cycle mix approaches were found to predict the fatigue life well at all loads and for all types of variable amplitude fatigue spectra. Progressive damage models were also applied to predict fatigue lifetime under variable amplitude fatigue loading. In this case a fracture mechanics based approach was found to under-predict the fatigue life for all types of spectra at lower loads, which was established to the absence of a crack initiation phase in this method. Whereas, a damage mechanics based approach was found to over-predict the fatigue lifetime for all the types of variable amplitude fatigue spectra, however the over- prediction remained mostly within the scatter of the experimental fatigue life data. It was concluded that, the damage mechanics based approach has potential for further modification and should be tested on different types of geometry and spectra.