Download or read book Studies in the History of Machine Tools written by Robert S. Woodbury and published by MIT Press (MA). This book was released on 1972 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work was originally published as four separate books; their titles, and reviewers' comments, are given below: History of the Gear-Cutting Machine: A Historical Study in Geometry and Machines "The book represents an overwhelmingly well-done job of reducing a great mass of material—scholarly references, patents, catalogs, engineering and trade journals, and machines themselves—into a logical story of development. Written with zest and relish, this vivid account presents a wealth of unusual information. The illustrations are particularly good, for many of them come from previously untapped sources." —Technology and Culture History of the Grinding Machine: A Historical Study in Tools and Precision Production "From the polished artifacts of prehistoric times Mr. Woodbury traces the development of methods, abrasives, and the machine tools which interdependently contributed to the advanced grinding techniques used today. Many fine illustrations." —The Tool Engineer History of the Milling Machine: A Study in Technical Development "Mr. Woodbury traces the evolution of milling machines from Eli Whitney's machine (circa 1820), the first miller ever built, to numerical controlled milling machines.... presented cleanly with ample detail. Fine illustration and complete bibliography are provided." —The Tool Engineer History of the Lathe to 1850: A Study in the Growth of a Technical Element of an Industrial Economy "Woodbury, who teaches the history of technology at the Massachusetts Institute of Technology, is at work on a history of machine design which promises to alter our perspectives not only in his special field but in general cultural history.... His present history of the lathe (to about 1850) absorbs the entire previous literature and goes far beyond it." —Lynn White, Jr.
Download or read book Tools and Machines written by Charles Barnard and published by Yokai Publishing. This book was released on 1903 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Short History of Machine Tools written by L. T. C. Rolt and published by Cambridge, Mass : M.I.T. Press. This book was released on 1965 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traces the development of machine tools and workshop techniques and highlights the contributions of various toolmakers.
Download or read book Machine Tools for High Performance Machining written by Norberto Lopez de Lacalle and published by Springer Science & Business Media. This book was released on 2008-10-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine tools are the main production factor for many industrial applications in many important sectors. Recent developments in new motion devices and numerical control have lead to considerable technological improvements in machine tools. The use of five-axis machining centers has also spread, resulting in reductions in set-up and lead times. As a consequence, feed rates, cutting speed and chip section increased, whilst accuracy and precision have improved as well. Additionally, new cutting tools have been developed, combining tough substrates, optimal geometries and wear resistant coatings. “Machine Tools for High Performance Machining” describes in depth several aspects of machine structures, machine elements and control, and application. The basics, models and functions of each aspect are explained by experts from both academia and industry. Postgraduates, researchers and end users will all find this book an essential reference.
Download or read book Machines and Tools written by Lisa Marty and published by Milliken Publishing Company. This book was released on 2005-09-01 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This packet is full of easy-to-use reproducible activities that make science a blast. Students learn through a multitude of formats, which makes the science behind machines and tools tons of fun!
Download or read book Audel Machine Shop Tools and Operations written by Rex Miller and published by John Wiley & Sons. This book was released on 2004-02-27 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Make your shop safe and smart If you're a machinist or a student of the trade, this second volume in Audel's machine shop library offers concise, to-the-point coverage of everything you need to know. You'll find definitions of all the shop tools; guidelines for set-up, safe operation, maintenance, and repair; illustrations and diagrams; review questions for students, and much more. Expect it to become one of your most-used tools. * Master all types of saws, drills, lathes, milling machinery, metal-finishing machines, and more * Learn safe operating procedures for cutting tools and the best ways to mount work in the machines * Find current details on new machines with electronic/digital controls * Understand how ultrasonics are used in metalworking * Explore information on machine shop robotics and electronics * Discover valuable tips for hobbyists, woodworkers, and home-shop owners
Download or read book Machine Tools for High Performance Machining written by Norberto Lopez de Lacalle and published by Springer. This book was released on 2010-10-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine tools are the main production factor for many industrial applications in many important sectors. Recent developments in new motion devices and numerical control have lead to considerable technological improvements in machine tools. The use of five-axis machining centers has also spread, resulting in reductions in set-up and lead times. As a consequence, feed rates, cutting speed and chip section increased, whilst accuracy and precision have improved as well. Additionally, new cutting tools have been developed, combining tough substrates, optimal geometries and wear resistant coatings. “Machine Tools for High Performance Machining” describes in depth several aspects of machine structures, machine elements and control, and application. The basics, models and functions of each aspect are explained by experts from both academia and industry. Postgraduates, researchers and end users will all find this book an essential reference.
Download or read book Machining and Machine tools written by J. Paulo Davim and published by Elsevier. This book was released on 2013-05-10 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third in the Woodhead Publishing Reviews: Mechanical Engineering Series, and includes high quality articles (full research articles, review articles and case studies) with a special emphasis on research and development in machining and machine-tools. Machining and machine tools is an important subject with application in several industries. Parts manufactured by other processes often require further operations before the product is ready for application. Traditional machining is the broad term used to describe removal of material from a work piece, and covers chip formation operations including: turning, milling, drilling and grinding. Recently the industrial utilization of non-traditional machining processes such as EDM (electrical discharge machining), LBM (laser-beam machining), AWJM (abrasive water jet machining) and USM (ultrasonic machining) has increased. The performance characteristics of machine tools and the significant development of existing and new processes, and machines, are considered. Nowadays, in Europe, USA, Japan and countries with emerging economies machine tools is a sector with great technological evolution. Includes high quality articles (full research articles, review articles and cases studies) with a special emphasis on research and development in machining and machine-tools Considers the performance characteristics of machine tools and the significant development of existing and new processes and machines Contains subject matter which is significant for many important centres of research and universities worldwide
Download or read book Machine Tools Production Systems 2 written by Christian Brecher and published by Springer Nature. This book was released on 2021-11-08 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this volume provides the user with assistance in the selection and design of important machine and frame components. It also provides help with machine design, calculation and optimization of these components in terms of their static, dynamic and thermoelastic behavior. This includes machine installation, hydraulic systems, transmissions, as well as industrial design and guidelines for machine design. The second part of this volume deals with the metrological investigation and assessment of the entire machine tool or its components with respect to the properties discussed in the first part of this volume. Following an overview of the basic principles of measurement and measuring devices, the procedure for measuring them is described. Acceptance of the machine using test workpieces and the interaction between the machine and the machining process are discussed in detail. The German Machine Tools and Manufacturing Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with color technical illustrations throughout. This first English edition is a translation of the German ninth edition.
Download or read book Machine Tools and Workshop Practice for Engineering Students and Apprentices written by Alfred Parr and published by . This book was released on 1905 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tools Production Systems 3 written by Christian Brecher and published by Springer Nature. This book was released on 2021-12-13 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this third volume focuses on the design of mechatronic components, in particular the feed drives of machine tools used to generate highly dynamic drive movements. Engineering guides for the selection and design of important machine components, the control technology of feed drives, and the measuring systems required for position capture are presented. Another focus is on process and diagnostic equipment for manufacturing machines and systems. The second part describes control concepts including programming methods for various applications of modern production systems. Programmable logic controllers (PLC), numerical controllers (NC) and robot controllers (RC) are part of these presentations. In the context of automated manufacturing systems, the various levels of the automation pyramid and the importance of control systems are also outlined. Finally, the volume deals with the engineering of machines and plants. The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.
Download or read book Machine Tools written by Ľubomír Šooš and published by BoD – Books on Demand. This book was released on 2020-10 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successful producers of machine tools today must offer customers highly efficient and accurate machines. This can only be achieved with the help of modern software in research, construction, production and quality control. Trends in development are oriented towards modular construction machines. The application of modern tools and the progressive construction of headstock has increased cutting speeds, thus significantly increasing the machine's productivity. The first section of the book is focused on trends in the development of machines. A second very significant machine parameter is accuracy. The rigidity of the machine is a necessary condition for achieving its required accuracy. The second part of the book is dedicated to the effect of the individual constructional nodes on stability, the optimization of system rigidity, and the measuring of the accuracy of the machining tools. The aim of the third and final section of the book is to point out the widest possibilities for the application of machine tools in industry. An example is presented of the application of machining tools in the orthoses manufacture.
Download or read book Machine Tools Handbook written by Prakash Hiralal Joshi and published by McGraw Hill Professional. This book was released on 2007-05-22 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acquire the Skills, Tools, and Techniques Needed to Ensure High Quality and Precision in the Design of Machined Parts! Designed for quick access on the job, Machine Tools Handbook explains in detail how to carry out basic and advanced machine tool operations and functions, providing a wealth of machine tool exercises to test and improve the performance of machinists. The tables, graphs, and formulas packed into this essential reference makes it a must-have for every machine and manufacturing workshop. Machine Tools Handbook features: Expert instructions on performing basic and advanced machine tool operations and functions Comparative tables for machine tool drives Complete guidelines for designing simple circuits for electrical automation Detailed graphs for gear design Solved examples that illustrate and prove formulas Inside This Hands-On Machine Tool Guide • Machine Tool Drives and Mechanisms • Rectilinear Drives • Drive Transmission and Manipulation • Machine Tool Elements • Dynamics of Machine Tools • Machine Tool Operation • Tool Engineering • Exercises
Download or read book Audel Machine Shop Basics written by Rex Miller and published by John Wiley & Sons. This book was released on 2004-01-30 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use the right tool the right way Here, fully updated to include new machines and electronic/digital controls, is the ultimate guide to basic machine shop equipment and how to use it. Whether you're a professional machinist, an apprentice, a trade student, or a handy homeowner, this fully illustrated volume helps you define tools and use them properly and safely. It's packed with review questions for students, and loaded with answers you need on the job. Mark Richard Miller is a Professor and Chairman of the Industrial Technology Department at Texas A&M University in Kingsville, Texas. * Understand basic machine shop practice and safety measures * Recognize the variations in similar tools and the purposes they serve * Learn recommended methods of mounting work in different machines * Obtain a complete working knowledge of numerically controlled machines and the operations they perform * Review procedures for safe and efficient use of cutting tools and cutters * Expand your knowledge with clear, step-by-step illustrations of proper equipment set-up and operation
Download or read book Technology of Machine Tools Machine tool systems management and utilitization written by Lawrence Livermore National Laboratory. Machine Tool Task Force and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Machining and Machine Tools written by Steven Liang and published by Springer. This book was released on 2015-12-29 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamental, analytical, and quantitative knowledge of machining process planning and optimization based on advanced and practical understanding of machinery, mechanics, accuracy, dynamics, monitoring techniques, and control strategies that they need to understanding machining and machine tools. It is written for first-year graduate students in mechanical engineering, and is also appropriate for use as a reference book by practicing engineers. It covers topics such as single and multiple point cutting processes; grinding processes; machine tool components, accuracy, and metrology; shear stress in cutting, cutting temperature and thermal analysis, and machine tool chatter. The second section of the book is devoted to “Non-Traditional Machining,” where readers can find chapters on electrical discharge machining, electrochemical machining, laser and electron beam machining, and biomedical machining. Examples of realistic problems that engineers are likely to face in the field are included, along with solutions and explanations that foster a didactic learning experience.
Download or read book Fundamentals of Metal Machining and Machine Tools written by Winston A. Knight and published by CRC Press. This book was released on 2019-08-08 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting changes in machining practice, Fundamentals of Machining and Machine Tools, Third Edition emphasizes the economics of machining processes and design for machining. This edition includes new material on super-hard cutting tool materials, tool geometries, and surface coatings. It describes recent developments in high-speed machining, hard machining, and cutting fluid applications such as dry and minimum-quantity lubrication machining. It also presents analytical methods that outline the limitations of various approaches. This edition features expanded information on tool geometries for chip breaking and control as well as improvements in cost modeling of machining processes.
