Download or read book Tool Dynamics and Workstation Effects on Power Hand Tool Operation written by Seoungyeon Oh and published by . This book was released on 1995 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Dynamic Biomechanical Model of the Human Operator Response to Impulsive Reaction Forces written by Jia-Hua Lin and published by . This book was released on 2001 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interventions Controls and Applications in Occupational Ergonomics written by William S. Marras and published by CRC Press. This book was released on 2006-02-02 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated, taking the scientific rigor to a whole new level, the second edition of the Occupational Ergonomics Handbook is now available in two volumes. This new organization demonstrates the enormous amount of advances that have occurred in the field since the publication of the first edition. The editors have brought together
Download or read book Occupational Ergonomics written by Waldemar Karwowski and published by CRC Press. This book was released on 2003-03-26 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational Ergonomics: Engineering and Administrative Controls focuses on prevention of work-related musculoskeletal disorders with an emphasis on engineering and administrative controls. Section I provides knowledge about risk factors for upper and lower extremities at work, while Section II concentrates on risk factors for work-related low back
Download or read book Ergonomics and Safety in Hand Tool Design written by Charles A. Cacha and published by CRC Press. This book was released on 1999-02-26 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses exclusively on ergonomics in the design and use of hand tools. Hand tools have been an integral supplement to the human hand since the beginning of civilization. Recently, they have been pinpointed as a prominent cause of workplace disease. Cumulative Trauma Disorders such as Tendonitus, Carpal Tunnel Syndrome, and Raynaud's Syndrome are caused by the specialization of motion employed when using a screw driver, the shock to the hand and wrist when a hammer strikes a nail, or the vibration of a power saw. Ergonomics and Safety in Hand Tool Design explores the relationship between Biomechanics, Safety, and Ergonomics allowing the reader to recognize, evaluate, and control ergonomic risk factors and improve hand tool design. After a history of hand tool use and design, the book is broken down by the various disciplines as they apply to hand tools, taking a broad approach. The author gives special attention to safe design and use, illustrated with detailed diagrams. The text serves as a guide to the human factors in safety and ergonomics for safety professionals.
Download or read book Occupational Biomechanics written by Don B. Chaffin and published by John Wiley & Sons. This book was released on 2006-05-05 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for previous editions of Occupational Biomechanics "This book is a valuable resource for any advanced ergonomist interested in physical ergonomics . . . provides valuable research information." -Ergonomics in Design "[This book] represents a distillation of the authors' combined years of experience in applying biomechanicsin various industries and work situations . . . I recommend this book to anyone, regardless of discipline, who is interested in understanding the many biomechanical factors which must be considered when trying to effectthe prevention and reduction of musculoskeletal injuries in the workplace." -Journal of Biomechanics "Impressive descriptions of biomechanical concepts and worksite considerations . . . based not only on mechanical and mathematical principles, but on solid anatomical and physiologic constructs . . . a very valuablereference source." -Research Communications in Chemical Pathology and Pharmacology THE DEFINITIVE TEXT ON DESIGNING FOR THE DEMANDS OF TODAY'S WORKPLACE With critical applications in manufacturing, transportation, defense, security, environmental safety and occupational health, and other industries, the field of occupational biomechanics is more central to industrial design than ever before. This latest edition of the popular and widely adopted Occupational Biomechanics provides the foundations and tools to assemble and evaluate biomechanical processes as they apply to today's changing industries, with emphasis on improving overall work efficiency and preventing work-related injuries. The book expertly weaves engineering and medical information from diverse sources and provides a coherent treatment of the biomechanical principles underlying the well-designed and ergonomically sound workplace. NEW TO THIS THOROUGHLY REVISED AND UPDATED FOURTH EDITION: * 150 new references and many new illustrations * Major changes within each chapter that reflect recent and significant findings * Recent research in musculoskeletal disorders * New measurement techniques for biomechanical parameters and numerous international initiatives on the subject Presented in an easy-to-understand manner and supported by over 200 illustrations and numerous examples, Occupational Biomechanics, Fourth Edition remains the premier one-stop reference for students and professionals in the areas of industrial engineering, product and process design, medicine, and occupational health and safety.
Download or read book The Occupational Ergonomics Handbook written by Waldemar Karwowski and published by CRC Press. This book was released on 1998-12-18 with total page 2092 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational ergonomics and safety studies the application of human behavior, abilities, limitations, and other characteristics to the design, testing, and evaluation of tools, machines, systems, tasks, jobs, and environments for productive, safe, comfortable, and effective use. Occupational Ergonomics Handbook provides current, comprehensive knowledge in this broad field, providing essential, state-of-the-art information from nearly 150 international leaders of this discipline. The text assesses the knowledge and expertise applied to industrial environments: Providing engineering guidelines for redesigning tools, machines, and work layouts Evaluating the demands placed on workers by current jobs Simulating alternative work methods Determining the potential for reducing physical job demands based on the implementation of new methods Topics also include: Fundamental ergonomic design principles at work Work-related musculoskeletal injuries, such as cumulative trauma to the upper extremity (CTDs) and low back disorders (LBDs), which affect several million workers each year with total costs exceeding $100 billion annually Current knowledge used for minimizing human suffering, potential for occupational disability, and related worker's compensation costs Working conditions under which musculoskeletal injuries might occur Engineering design measures for eliminating or reducing known job-risk factors Optimal manufacturing processes regarding human perceptual and cognitive abilities as well as task reliability Identifying the worker population affected by adverse conditions Early medical and work intervention efforts Economics of an ergonomics maintenance program Ergonomics as an essential cost to doing business Ergonomics intervention includes design for manufacturability, total quality management, and work organization. Occupational Ergonomics Handbook demonstrates how ergonomics serves as a vital component for the activities of the company and enables an advantageous cooperation between management and labor. This new handbook serves a broad segment of industrial practitioners, including industrial and manufacturing engineers; managers; plant supervisors and ergonomics professionals; researchers and students from academia, business, and government; human factors and safety specialists; physical therapists; cognitive and work psychologists; sociologists; and human-computer communications specialists.
Download or read book Digital Human Modeling written by Vincent G. Duffy and published by Springer Science & Business Media. This book was released on 2011-06-24 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Third International Conference on Digital Human Modeling, ICDHM 2011, held in Orlando, FL, USA in July 2011. The 58 revised papers presented were carefully reviewed and selected from numerous submissions. The papers accepted for presentation thoroughly cover the thematic area of anthropometry applications, posture and motion modeling, digital human modeling and design, cognitive modeling, and driver modeling.
Download or read book Musculoskeletal Disorders and the Workplace written by Institute of Medicine and published by National Academies Press. This book was released on 2001-06-24 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every year workers' low-back, hand, and arm problems lead to time away from jobs and reduce the nation's economic productivity. The connection of these problems to workplace activities-from carrying boxes to lifting patients to pounding computer keyboards-is the subject of major disagreements among workers, employers, advocacy groups, and researchers. Musculoskeletal Disorders and the Workplace examines the scientific basis for connecting musculoskeletal disorders with the workplace, considering people, job tasks, and work environments. A multidisciplinary panel draws conclusions about the likelihood of causal links and the effectiveness of various intervention strategies. The panel also offers recommendations for what actions can be considered on the basis of current information and for closing information gaps. This book presents the latest information on the prevalence, incidence, and costs of musculoskeletal disorders and identifies factors that influence injury reporting. It reviews the broad scope of evidence: epidemiological studies of physical and psychosocial variables, basic biology, biomechanics, and physical and behavioral responses to stress. Given the magnitude of the problem-approximately 1 million people miss some work each year-and the current trends in workplace practices, this volume will be a must for advocates for workplace health, policy makers, employers, employees, medical professionals, engineers, lawyers, and labor officials.
Download or read book Assessment of the Ergonomic Quality of Hand held Tools and Computer Input Devices written by Helmut Strasser and published by IOS Press. This book was released on 2007 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Ergonomics Association (IEA) is currently developing standards for Ergonomic Quality in Design (EQUID) which primarily intends to promote ergonomics principles and the adaptation of a process approach for the development of products, work systems and services. It is important to assess the ergonomic quality of products, hand-held tools and computer input devices through working processes that represent reality. Well-designed working tools can be expected to reduce or eliminate fatigue, discomfort, accidents and health problems and they can lead to improvements in productivity and quality. Furthermore, absenteeism, job turnover and training costs can positively be influenced by the working tools and the environment. Not all these short-term and long-term issues of working tools can be quantified in pragmatically oriented ergonomic research approaches. But multi-channel electromyography, which enables the measurement of the physiological costs of the muscles involved in handling tools during standardized working tests, and subjective assessments of experienced subjects enable a reliable insight in the essential ergonomic criteria of working tools and products. In this respect it is advantageous to provide a test procedure, in which working tests can be carried out alternating both with test objects and reference models.
Download or read book Assessment of the Ergonomic Quality of Hand Held Tools and Computer Input Devices written by H. Strasser and published by IOS Press. This book was released on 2007-10-05 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Ergonomics Association (IEA) is currently developing standards for Ergonomic Quality in Design (EQUID) which primarily intends to promote ergonomics principles and the adaptation of a process approach for the development of products, work systems and services. It is important to assess the ergonomic quality of products, hand-held tools and computer input devices through working processes that represent reality. Well-designed working tools can be expected to reduce or eliminate fatigue, discomfort, accidents and health problems and they can lead to improvements in productivity and quality. Furthermore, absenteeism, job turnover and training costs can positively be influenced by the working tools and the environment. Not all these short-term and long-term issues of working tools can be quantified in pragmatically oriented ergonomic research approaches. But multi-channel electromyography, which enables the measurement of the physiological costs of the muscles involved in handling tools during standardized working tests, and subjective assessments of experienced subjects enable a reliable insight in the essential ergonomic criteria of working tools and products. In this respect it is advantageous to provide a test procedure, in which working tests can be carried out alternating both with test objects and reference models.
Download or read book Mathematics as a Laboratory Tool written by John Milton and published by Springer Nature. This book was released on 2021-08-11 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Mathematics as a Laboratory Tool reflects the growing impact that computational science is having on the career choices made by undergraduate science and engineering students. The focus is on dynamics and the effects of time delays and stochastic perturbations (“noise”) on the regulation provided by feedback control systems. The concepts are illustrated with applications to gene regulatory networks, motor control, neuroscience and population biology. The presentation in the first edition has been extended to include discussions of neuronal excitability and bursting, multistability, microchaos, Bayesian inference, second-order delay differential equations, and the semi-discretization method for the numerical integration of delay differential equations. Every effort has been made to ensure that the material is accessible to those with a background in calculus. The text provides advanced mathematical concepts such as the Laplace and Fourier integral transforms in the form of Tools. Bayesian inference is introduced using a number of detective-type scenarios including the Monty Hall problem.
Download or read book Computer Aided Control System Design Methods Tools And Related Topics written by Mietek A Brdys and published by World Scientific. This book was released on 1994-04-20 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about Computer Aided Control System Design (CACSD) of the direct process controller. Various methods and tools, representing an up-to-date level of development, are presented by leading experts. Several articles describe main principles and problems associated with modern direct control and with CACSD. Existing tools are presented, including packages for stability analysis of nonlinear systems, adaptive control design and integrated analysis, and simulation and tuning of controllers. The reader can observe that it is possible to develop CACSD tools by using open general packages such as Matlab or Simulab, or by providing specialised software. He can then compare both approaches and get an improved understanding of their respective advantages and disadvantages. The leading article by the editors presents CACSD Methods and tools in a broader context. There is also detailed material on upper control layers, hierarchical control, and real-time systems.
Download or read book Tool and Manufacturing Engineers Handbook Desk Edition written by W. H. Cubberly and published by Society of Manufacturing Engineers. This book was released on 1989 with total page 1253 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMEH Desk Edition presents a unique collection of manufacturing information in one convenient source. Contains selected information from TMEH Volumes 1-5--over 1,200 pages of manufacturing information. A total of 50 chapters cover topics such as machining, forming, materials, finishing, coating, quality control, assembly, and management. Intended for daily use by engineers, managers, consultants, and technicians, novice engineers or students.
Download or read book Advances in Computer Information and Systems Sciences and Engineering written by Khaled Elleithy and published by Springer Science & Business Media. This book was released on 2007-06-06 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference proceedings of: International Conference on Industrial Electronics, Technology & Automation (IETA 05) International Conference on Telecommunications and Networking (TeNe 05) International Conference on Engineering Education, Instructional Technology, Assessment, and E-learning (EIAE 05) include a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of: Industrial Electronics, Technology and Automation, Telecommunications, Networking, Engineering Education, Instructional Technology and e-Learning. The three conferences, (IETA 05, TENE 05 and EIAE 05) were part of the International Joint Conference on Computer, Information, and System Sciences, and Engineering (CISSE 2005). CISSE 2005, the World's first Engineering/Computing and Systems Research E-Conference was the first high-caliber Research Conference in the world to be completely conducted online in real-time via the internet. CISSE received 255 research paper submissions and the final program included 140 accepted papers, from more than 45 countries. The whole concept and format of CISSE 2005 was very exciting and ground-breaking. The powerpoint presentations, final paper manuscripts and time schedule for live presentations over the web had been available for 3 weeks prior to the start of the conference for all registrants, so they could pick and choose the presentations they want to attend and think about questions that they might want to ask. The live audio presentations were also recorded and are part of the permanent CISSE archive, which includes all power point presentations, papers and recorded presentations. All aspects of the conference were managed on-line; not only the reviewing, submissions and registration processes; but also the actual conference. Conference participants - authors, presenters and attendees - only needed an internet connection and sound available on their computers in order to be able to contribute and participate in this international ground-breaking conference. The on-line structure of this high-quality event allowed academic professionals and industry participants to contribute work and attend world-class technical presentations based on rigorously refereed submissions, live, without the need for investing significant travel funds or time out of the office. Suffice to say that CISSE received submissions from more than 50 countries, for whose researchers, this opportunity presented a much more affordable, dynamic and well-planned event to attend and submit their work to, versus a classic, on-the-ground conference. The CISSE conference audio room provided superb audio even over low speed internet connections, the ability to display PowerPoint presentations, and cross-platform compatibility (the conferencing software runs on Windows, Mac, and any other operating system that supports Java). In addition, the conferencing system allowed for an unlimited number of participants, which in turn granted CISSE the opportunity to allow all participants to attend all presentations, as opposed to limiting the number of available seats for each session. The implemented conferencing technology, starting with the submission & review system and ending with the online conferencing capability, allowed CISSE to conduct a very high quality, fulfilling event for all participants. See: www.cissee2005.org, sections: IETA, TENE, EIAE
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book NASA Tech Briefs written by and published by . This book was released on 1981 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
