Download or read book TMS 2016 Supplemental Proceedings written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2016-02-03 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMS 2016 Annual Meeting Supplemental Proceedings is a collection of papers from the TMS 2016 Annual Meeting & Exhibition, held February 14-18 in Nashville, Tennessee, USA. The papers in this volume represent 21 symposia from the meeting. This volume, along with the other proceedings volumes published for the meeting, and archival journals, such as Metallurgical and Materials Transactions and Journal of Electronic Materials, represents the available written record of the 67 symposia held at TMS2016. This proceedings volume contains both edited and unedited papers; the unedited papers have not necessarily been reviewed by the symposium organizers and are presented “as is.” The opinions and statements expressed within the papers are those of the individual authors only, and no confirmations or endorsements are intended or implied.

Download or read book TMS 2016 145th Annual Meeting Exhibition Annual Meeting Supplemental Proceedings written by The Minerals, Metals & Materials Society (TMS) and published by Springer. This book was released on 2016-12-01 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Light Metals 2016 written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2016-02-09 with total page 1083 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2016 collection will include papers from the following symposia: Alumina and Bauxite Aluminum Alloys, Processing, and Characterization Aluminum Reduction Technology Cast Shop Technology Electrode Technology Strip Casting

Download or read book REWAS 2016 written by Bart Blanpain and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings from a 2016 sustainability symposium Information from REWAS 2016 proceedings were collected and published in REWAS 2016: Towards Materials Resource Sustainability. This collection covers the proceedings of the symposium sponsored by the Recycling and Environmental Technologies Committee; the Materials and Society Committee; the Extracting & Processing Division; and the Light Metals Division of the Minerals, Metals and Materials Society. Topics covered include: enabling and understanding the sustainability related to ferrous and non-ferrous metals processing; batteries; rare earth element applications; and building materials. At REWAS 2016, materials professionals exchanged ideas with other researchers and stakeholders to outline a path toward a resource-efficient society.

Download or read book Magnesium Technology 2016 written by Alok Singh and published by John Wiley & Sons. This book was released on 2016-02-03 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2016 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications. The collection includes more than 50 papers.

Download or read book Energy Technology 2016 written by Li Li and published by Springer. This book was released on 2016-12-16 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics on CO2 sequestration and reduction in greenhouse gas emissions from process engineering and materials for clean energy are covered. Papers addressing sustainable technologies in extractive metallurgy, materials processing and manufacturing industries with reduced energy consumption and CO2 emission are also included, as well as industrial energy efficient technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery. The book also carries contributions from all areas of non-nuclear and non-traditional energy sources, including renewable energy sources such as solar, wind, biomass, etc. The book also emphasizes novel mineral beneficiation, processing, and extraction techniques leading to waste minimization of critical rare-earth materials used in energy systems (e.g., magnets, display and lighting devices).

Download or read book EPD Congress 2016 written by Antoine Allanore and published by John Wiley & Sons. This book was released on 2016-02-09 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: EPD Congress is an annual collection of conference proceedings that addresses extraction and processing metallurgy. The papers in this book are drawn from symposia held at the 2016 Annual Meeting of The Minerals, Metals & Materials Society. The 2016 edition includes papers from the following symposia: Materials Processing Fundamentals Advanced Characterization Techniques for Quantifying and Modeling Deformation

Download or read book Rare Metal Technology 2016 written by Shafiq Alam and published by John Wiley & Sons. This book was released on 2016-02-16 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents the papers presented in the symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Paper topics include the extraction and processing of elements like antimony, arsenic, gold, indium, palladium, platinum, rare earth metals including yttrium and neodymium, titanium, tungsten, and vanadium. The rare processing techniques covered include direct extraction process for rare earth element recovery; biosorption of precious metals; fluorination behavior of uranium and zirconium mixture of fuel debris treatment; and recovery of valuable components of commodity metals such as zinc, nickel, and metals from slag.

Download or read book Characterization of Minerals Metals and Materials 2016 written by Shadia Ikhmayies and published by John Wiley & Sons. This book was released on 2016-02-04 with total page 879 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization is an important and fundamental step in material research before and after processing. This bookfocuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. It is a highly authoritative collection of articles written by experts from around the world. The articles center on materials characterization, extraction, processing, corrosion, welding, solidification, and method development. In addition, articles focus on clays, ceramics, composites, ferrous metals, non-ferrous metals, minerals, electronic, magnetic, environmental, advanced and soft materials. This book will serve the dual purpose of furnishing a broad introduction of the field to novices while simultaneously serving to keep subject matter experts up-to-date.

Download or read book CFD Modeling and Simulation in Materials Processing 2016 written by Laurentiu Nastac and published by Springer. This book was released on 2017-08-31 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shape Casting written by Murat Tiryakioǧlu and published by John Wiley & Sons. This book was released on 2016-02-03 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers on the science, engineering, and technology of shape castings, with contributions from researchers worldwide. Among the topics that are addressed are structure-property-performance relationships, modeling of casting processes, and the effect of casting defects on the mechanical properties of cast alloys.

Download or read book 7th International Symposium on High Temperature Metallurgical Processing written by Jiann-Yang Hwang and published by John Wiley & Sons. This book was released on 2016-02-03 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology, operation, energy, environmental, analysis, and future development of the metallurgical industries utilizing high temperature processes are covered in the book. The innovations on the extraction and production of ferrous and nonferrous metals, alloys, and refractory and ceramic materials, the heating approaches and energy management, and the treatment and utilizations of the wastes and by-products are the topics of special interests. This book focuses on the following issues: High Efficiency New Metallurgical Process and Technology Fundamental Research of Metallurgical Process Alloys and Materials Preparation Direct Reduction and Smelting Reduction Coking, New Energy and Environment Utilization of Solid Slag/Wastes and Complex Ores Characterization of High Temperature Metallurgical Process

Download or read book Light Metals 2016 written by Edward Williams and published by Springer. This book was released on 2016-12-20 with total page 983 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia are a key part of the TMS Annual Meeting & Exhibition, presenting the most recent developments, discoveries, and practices in primary aluminum science and technology. Publishing the proceedings from these important symposia, the Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2016 collection includes papers from the following symposia: 1.Alumina and Bauxite 2.Aluminum Alloys, Processing, and Characterization 3.Aluminum Reduction Technology 4.Cast Shop Technology 5.Electrode Technology 6.Strip Casting

Download or read book Multiscale Modeling of Additively Manufactured Metals written by Yi Zhang and published by Elsevier. This book was released on 2020-06-29 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale Modeling of Additively Manufactured Metals: Application to Laser Powder Bed Fusion Process provides comprehensive coverage on the latest methodology in additive manufacturing (AM) modeling and simulation. Although there are extensive advances within the AM field, challenges to predictive theoretical and computational approaches still hinder the widespread adoption of AM. The book reviews metal additive materials and processes and discusses multiscale/multiphysics modeling strategies. In addition, coverage of modeling and simulation of AM process in order to understand the process-structure-property relationship is reviewed, along with the modeling of morphology evolution, phase transformation, and defect formation in AM parts. Residual stress, distortion, plasticity/damage in AM parts are also considered, with scales associated with the spatial, temporal and/or material domains reviewed. This book is useful for graduate students, engineers and professionals working on AM materials, equipment, process, development and modeling. - Includes the fundamental principles of additive manufacturing modeling techniques - Presents various modeling tools/software for AM modeling - Discusses various design methods and how to optimize the AM process using these models

Download or read book TMS 2016 Supplemental Proceedings written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2016-02-09 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMS 2016 Annual Meeting Supplemental Proceedings is a collection of papers from the TMS 2016 Annual Meeting & Exhibition, held February 14-18 in Nashville, Tennessee, USA. The papers in this volume represent 21 symposia from the meeting. This volume, along with the other proceedings volumes published for the meeting, and archival journals, such as Metallurgical and Materials Transactions and Journal of Electronic Materials, represents the available written record of the 67 symposia held at TMS2016. This proceedings volume contains both edited and unedited papers; the unedited papers have not necessarily been reviewed by the symposium organizers and are presented “as is.” The opinions and statements expressed within the papers are those of the individual authors only, and no confirmations or endorsements are intended or implied.

Download or read book Advances in Metal Additive Manufacturing written by Sachin Salunkhe and published by Elsevier. This book was released on 2022-10-10 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Metal Additive Manufacturing explains fundamental information and the latest research on new technologies, including powder bed fusion, direct energy deposition using high energy beams, and hybrid additive and subtractive methods. This book introduces readers to the technology, provides everything needed to understand how the different stages work together, and inspires to think beyond traditional metal processing to capture new ideas in metal. Chapters offer an introduction on metal additive manufacturing, processes, and properties and standards and then present surveys on the most significant international advances in metal additive manufacturing. Throughout, the book presents a focus on the effect of important process parameters on the microstructure, mechanical properties and wear behavior of additively manufactured parts. - Covers the entire process chain of metal additive manufacturing, from input data preparation to part certification - Describes a wide range of the latest design tools and options, including generative design, topology optimization, and lattice and surface optimization - Addresses additive manufacturing, with a comprehensive list of metals including titanium, aluminum, iron-and nickel-based alloys and Inconel 718

Download or read book Advances in Ceramics for Environmental Functional Structural and Energy Applications written by Morsi M. Mahmoud and published by John Wiley & Sons. This book was released on 2018-09-27 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 20 manuscripts presented during the Materials Science & Technology 2017 Conference (MS&T'17), held October 8-12, 2017 at the David L. Lawrence Convention Center, Pittsburgh, PA. Papers from the following symposia are included in this volume: 9th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing Advances in Dielectric Materials and Electronic Devices Construction and Building Materials for a Better Environment Innovative Processing and Synthesis of Ceramics, Glasses and Composites Materials Issues in Nuclear Waste Management in the 21st Century Materials Development for Nuclear Applications and Extreme Environments Materials for Nuclear Energy Applications Nanotechnology for Energy, Healthcare and Industry Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work – Rustum Roy Symposium These symposia provided a forum for scientists, engineers, and technologists to discuss and exchange state-of-the-art ideas, information, and technology on advanced methods and approaches for processing, synthesis, characterization, and applications of ceramics, glasses, and composites. Each manuscript was peer-reviewed using The American Ceramic Society's review process. The editors wish to extend their gratitude and appreciation to their symposium co-organizers, to all of the authors for their valuable submissions, to all the participants and session chairs for their time and effort, and to all the reviewers for their comments and suggestions. We hope that this volume will serve as a useful reference for the professionals working in the field of materials science.