Download or read book Titanium Alloys Towards Achieving Enhanced Properties for Diversified Applications written by A. K. M. Nurul Amin and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Titanium Alloys written by A.K.M. Nurul Amin and published by BoD – Books on Demand. This book was released on 2012-03-16 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first section of the book includes the following topics: fusion-based additive manufacturing (AM) processes of titanium alloys and their numerical modelling, mechanism of ?-case formation mechanism during investment casting of titanium, genesis of gas-containing defects in cast titanium products. Second section includes topics on behavior of the (? + ?) titanium alloys under extreme pressure and temperature conditions, hot and super plasticity of titanium (? + ?) alloys and some machinability aspects of titanium alloys in drilling. Finally, the third section includes topics on different surface treatment methods including nanotube-anodic layer formation on two phase titanium alloys in phosphoric acid for biomedical applications, chemico-thermal treatment of titanium alloys applying nitriding process for improving corrosion resistance of titanium alloys.

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.

Download or read book Structural Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2021-04-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Biomaterials: Properties, Characteristics, and Selection serves as a single point of reference to digest current research and develop a deeper understanding in the field of biomaterials engineering. This book uses a materials-focused approach, allowing the reader to quickly access specific, detailed information on biomaterials characterization and selection. Relevant to a range of readers, this book provides holistic coverage of the broad categories of structural biomaterials currently available and used in medical applications, highlighting the property requirements for structural biomaterials, their biocompatibility performance and their safety regulation in key categories such as metals, ceramics and polymers. The materials science perspective of this text ensures the content is accessible even to those without an extensive background in applied medicine, positioning this text not just for students, but as an overview and reference for researchers, scientists and engineers entering the field from related materials science disciplines. - Provides a unique, holistic approach, covering key biomaterials categories in one text, including metals, ceramics and polymers - Discusses advantages, disadvantages, biocompatibility performance and safety regulations, allowing for accurate materials selection in medical applications - Utilizes a materials science perspective, allowing those without an extensive applied medical background to learn about the field

Download or read book Tribo Behaviors of Biomaterials and their Applications written by Jawahar Paulraj and published by CRC Press. This book was released on 2024-08-29 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribo-Behaviors of Biomaterials and Their Applications enables the reader to make an informed choice in the selection of biomaterials that aid the creation of safe and long-lasting surgical devices. Looking at metals, ceramics, and polymers with craniofacial, cardiovascular, spinal, dentistry, and orthopedic applications, this book is an essential guide to tribology in biomaterials. Handling wear within biodevices is a pressing issue due to the continuous friction and corrosion within the body. It is further complicated by the involvement of body fluids, which can lead to revision surgery to relieve pain. In order to lessen this, engineers can choose a biomaterial better suited to the application. Including detailed discussion of the properties of each biomaterial, this book covers the behaviors of implants, along with the methods and standards applied to devices. It has chapters on metals, ceramics, and polymers. It also covers body fluid lubrication and the physiological effects they have on implants, along with their tribo-corrosion behaviors. This book will be of interest to engineers and researchers in the field of biomechanical engineering, biomedical engineering, materials science, and manufacturing engineering, alongside all those researching tribology and nanocomposites.

Download or read book Integrated Computer Technologies in Mechanical Engineering 2022 written by Mykola Nechyporuk and published by Springer Nature. This book was released on 2023-07-19 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering”—Synergetic Engineering (ICTM) was established by National Aerospace University “Kharkiv Aviation Institute.” The Conference ICTM’2022 was held in Kharkiv, Ukraine, during November 18–20, 2022. During this conference, technical exchanges between the research community were carried out in the forms of keynote speeches, panel discussions, as well as special session. In addition, participants were treated to a series of receptions, which forge collaborations among fellow researchers. ICTM’2022 received 137 papers submissions from different countries. All of these offer us plenty of valuable information and would be of great benefit to experience exchange among scientists in modeling and simulation. The organizers of ICTM’2022 made great efforts to ensure the success of this conference. We hereby would like to thank all the members of ICTM’2022 Advisory Committee for their guidance and advice, the members of program committee and organizing committee, and the referees for their effort in reviewing and soliciting the papers, and all authors for their contribution to the formation of a common intellectual environment for solving relevant scientific problems. Also, we grateful to Springer—Janusz Kacprzyk and Thomas Ditzinger as the editor responsible for the series “Lecture Notes in Networks and Systems” for their great support in publishing these selected papers.

Download or read book Orthopedic Biomaterials written by Bingyun Li and published by Springer. This book was released on 2018-03-22 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest advances, applications, and challenges in orthopedic biomaterials. Topics covered include materials for orthopedic applications, including nanomaterials, biomimetic materials, calcium phosphates, polymers, biodegradable metals, bone grafts/implants, and biomaterial-mediated drug delivery. Absorbable orthopedic biomaterials and challenges related to orthopedic biomaterials are covered in detail. This is an ideal book for graduate and undergraduate students, researchers, and professionals working with orthopedic biomaterials and tissue engineering. This book also: Describes biodegradable metals for orthopedic applications, such as Zn-based medical implants Thoroughly covers various materials for orthopedic applications, including absorbable orthopedic biomaterials with a focus on polymers Details the state-of-the-art research on orthopedic nanomaterials and nanotechnology

Download or read book 3D Printing written by Dragan Cvetković and published by BoD – Books on Demand. This book was released on 2018-10-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, "3D Printing", is divided into two parts: the first part is devoted to the relationship between 3D printing and engineering, and the second part shows the impact of 3D printing on the medical sector in general. There are five sections in the first part (sections are dedicated to stereolithography, new techniques of high-resolution 3D printing, application of 3D printers in architecture and civil engineering, the additive production with the metal components and the management of production by using previously mentioned technology in more complex ways). There are four chapters in the second part with the following topics: education of medical staff through surgical simulations, tissue engineering and potential applications of 3D printing in ophthalmology and orthopedics.

Download or read book New Challenges and Industrial Applications for Corrosion Prevention and Control written by El Kacimi, Younes and published by IGI Global. This book was released on 2020-06-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals are used at an extremely high rate in the industrial and manufacturing fields. Exemplary properties including strength and ductility have made this material highly dynamic; however, the risk of corrosion remains a vital issue. The study of corrosion prevention has attracted interest from researchers and professionals as new technologies are emerging that can assist in the prevention of material destruction. However, research is lacking on the application of these protective technologies within specific fields. New Challenges and Industrial Applications for Corrosion Prevention and Control provides emerging research exploring the theoretical and practical aspects of protective methods against corrosion and the implementation of these techniques within a wide span of professional disciplines. Featuring coverage on a broad range of topics such as molecular modeling, surface treatments, and biomaterials, this book is ideally designed for engineers, industrial chemists, material scientists, researchers, engineers, academicians, practitioners, and students seeking current research on the technological advancements in corrosion protection in various professional scopes.

Download or read book Sustainable Materials and Manufacturing Technologies written by Navneet Khanna and published by CRC Press. This book was released on 2023-02-27 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and manufacturing techniques are a few of the vital processes in production industries. Most of the materials processing and manufacturing techniques currently used in industries are a major cause of environmental pollution and are hence unsustainable. This book provides in-depth knowledge about challenges faced during the processing of advanced materials and discusses possible ways to achieve sustainability in manufacturing. This book: Covers advances in cryogenic machining, optimization, and economical and energy assessment of machining Provides case studies and numerical design with analysis using computational fluid dynamics of minimum quantity lubrication mist droplets Reviews metalworking fluids, laser micro-texturing, materials and manufacturing in sustainability, biofuels additives, nano-materials, and additive manufacturing of waste plastic Explores the use of artificial intelligence and machine learning-based manufacturing techniques; and Covers the latest challenges and future trends in sustainable manufacturing Sustainable Materials and Manufacturing Technologies is primarily written for senior undergraduate and graduate students, as well as researchers in mechanical, manufacturing, industrial, and production engineering, and material science.

Download or read book Application of Lasers in Manufacturing written by Uday Shanker Dixit and published by Springer. This book was released on 2018-06-29 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book mainly addresses the applications of lasers in the manufacture of various industrial components. The technologies presented here have scopes of application ranging from the macro to meso and micro level of components and features. This book includes chapters on the basic and advanced applications of lasers in the manufacturing domain. They present theoretical and practical aspects of laser technology for various applications such as laser-based machining, micro-scribing, texturing, machining of micro-sized channels; laser welding; laser-based correction of sheet metal, i.e. straightening; laser forming; and laser technology for 3-D printing. Lasers have various applications such as the production of powerful lights for illumination or decoration; measurement of velocity (transportation) and length; interferometry; printing; recording; communication; bio-medical instrumentation and pollution detection. A significant body of literature is available on the physics of lasers and types of lasers. However it has been noted there are a few books published on the “applications of lasers in manufacturing domain,” a gap that this book remedies. Gathering contributions by leading engineers and academicians in this area, it offers a valuable source of information for young scientists and research students.

Download or read book Nanotechnology for Advances in Medical Microbiology written by Naga Raju Maddela and published by Springer Nature. This book was released on 2021-03-22 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined fields of Microbiology and Nanotechnology have been most successful in providing novel solutions for protecting the health of humans and environment. This book covers the implications of nano-strategies to combat bacterial pathogens, applications of nanotechniques in microbiology, and innovative advances in the area of medical microbiology. Contents are divided into three sections -- Nanoscience in controlling bacterial pathogens, Nanoscience in Microbiology, Medical Microbiology. This volume is going to provide timely information about the technological advances of Nanoscience in the domain of Microbiology, with a special emphasis on Pathobiology. The book is a useful read for students and researchers in microbiology, nanotechnology and medical microbiology.

Download or read book Applications of Biotribology in Biomedical Systems written by Abhishek Kumar and published by Springer Nature. This book was released on with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additive Manufacturing of Metals written by Gregory John Gibbons and published by MDPI. This book was released on 2021-05-26 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an exciting collection of research articles that offer a unique view into the fast developing field of metal additive manufacturing, providing insights into this advanced manufacturing technology. The articles span recent advances in metal AM technologies, and their application to a wide range of metals, exploring how the processing parameters offer unique material properties. This book encapsulates the state of the art in this rapidly evolving field of technology and will be a valuable resource for researchers in the field, from Ph.D. students to professors, and through to industrial end users.

Download or read book Innovations in Biomedical Engineering written by Marek Gzik and published by Springer. This book was released on 2016-10-03 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the “Innovations in Biomedical Engineering IBE’2016” Conference held on October 16–18, 2016 in Poland, discussing recent research on innovations in biomedical engineering. The past decade has seen the dynamic development of more and more sophisticated technologies, including biotechnologies, and more general technologies applied in the area of life sciences. As such the book covers the broadest possible spectrum of subjects related to biomedical engineering innovations. Divided into four parts, it presents state-of-the-art achievements in: • engineering of biomaterials, • modelling and simulations in biomechanics, • informatics in medicine • signal analysis The book helps bridge the gap between technological and methodological engineering achievements on the one hand and clinical requirements in the three major areas diagnosis, therapy and rehabilitation on the other.

Download or read book 3D Printing and Additive Manufacturing Technologies written by L. Jyothish Kumar and published by Springer. This book was released on 2018-06-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of papers on advanced technologies for 3D printing and additive manufacturing, and demonstrates how these technologies have changed the face of direct, digital technologies for the rapid production of models, prototypes and patterns. Because of their wide range of applications, 3D printing and additive manufacturing technologies have sparked a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across such diverse industries as consumer products, aerospace, medical devices and automotive engineering. This book will help designers, R&D personnel, and practicing engineers grasp the latest developments in the field of 3D Printing and Additive Manufacturing.