Download or read book Time interleaved Analog to Digital Converters written by Simon Louwsma and published by Springer Science & Business Media. This book was released on 2010-09-08 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-interleaved Analog-to-Digital Converters describes the research performed on low-power time-interleaved ADCs. A detailed theoretical analysis is made of the time-interleaved Track & Hold, since it must be capable of handling signals in the GHz range with little distortion, and minimal power consumption. Timing calibration is not attractive, therefore design techniques are presented which do not require timing calibration. The design of power efficient sub-ADCs is addressed with a theoretical analysis of a successive approximation converter and a pipeline converter. It turns out that the first can consume about 10 times less power than the latter, and this conclusion is supported by literature. Time-interleaved Analog-to-Digital Converters describes the design of a high performance time-interleaved ADC, with much attention for practical design aspects, aiming at both industry and research. Measurements show best-inclass performance with a sample-rate of 1.8 GS/s, 7.9 ENOBs and a power efficiency of 1 pJ/conversion-step.
Download or read book Background Calibration of Time Interleaved Data Converters written by Manar El-Chammas and published by Springer Science & Business Media. This book was released on 2011-12-17 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes techniques for time-interleaving a number of analog-to-digital data converters to achieve demanding bandwidth requirements. Readers will benefit from the presentation of a low-power solution that can be used in actual products, while alleviating the time-varying signal artifacts that typically arise when implementing such a system architecture.
Download or read book Interleaving Concepts for Digital to Analog Converters written by Christian Schmidt and published by Springer. This book was released on 2019-07-19 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern complementary metal oxide semiconductor (CMOS) digital-to-analog converters (DACs) are limited in their bandwidth due to technological constraints. These limitations can be overcome by parallel DAC architectures, which are called interleaving concepts. Christian Schmidt analyzes the limitations and the potential of two innovative DAC interleaving concepts to provide the basis for a practical implementation: the analog multiplexing DAC (AMUX-DAC) and the frequency interleaving DAC (FI-DAC). He presents analytical and discrete-time models as a theoretical foundation and develops digital signal processing (DSP) algorithms to compensate the analog impairments. Further, he quantifies the impact of various limiting parameters with numerical simulations and verifies both concepts in laboratory experiments. About the Author: Christian Schmidt works at the Fraunhofer Heinrich-Hertz-Institute, Berlin, Germany, on innovative solutions for broadband signal generation in the field of optical communications. The studies for his dissertation were carried out at the Technische Universität Berlin and at the Fraunhofer Heinrich-Hertz-Institute, both Berlin, Germany.
Download or read book Smart AD and DA Conversion written by Pieter Harpe and published by Springer. This book was released on 2012-09-05 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of the application of semiconductors for controlling currents goes back all the way to 1926, in which Julius Lilienfeld led a patent for a “Method and apparatus for controlling electric currents” [1], which is considered the rst work on metal/semiconductor eld-effect transistors. More well-known is the work of William Shockley, John Bardeen and Walter Brattain in the 1940s [2, 3], after which the development of semiconductor devices commenced. In 1958, independent work from Jack Kilby and Robert Noyce ledto the invention of integrated circuits. A few milestones in IC design are the rst monolithic operational ampli er in 1963 (Fairchild?A702, Bob Widlar) and the rst o- chip 4-bit microprocessor in 1971 (Intel 4004). Ever since the start of the semiconductor history, integration plays an imp- tant role: starting from single devices, ICs with basic functions were developed (e. g. opamps, logic gates), followed by ICs that integrate larger parts of a s- tem (e. g. microprocessors, radio tuners, audio ampli ers). Following this trend of system integration, this eventually leads to the integration of analog and d- ital components in one chip, resulting in mixed-signal ICs: digital components are required because signal processing is preferably done in the digital - main; analog components are required because physical signals are analog by nature. Mixed-signal ICs are already widespread in many applications (e. g. - dio, video); for the future, it is expected that this trend will continue, leading to a larger scale of integration.
Download or read book Analog to Digital Conversion written by Marcel J.M. Pelgrom and published by Springer. This book was released on 2022-03-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is appropriate for use in graduate-level curricula in analog-to-digital conversion, as well as for practicing engineers in need of a state-of-the-art reference on data converters. It discusses various analog-to-digital conversion principles, including sampling, quantization, reference generation, Nyquist architectures and sigma-delta modulation. This book presents an overview of the state-of-the-art in this field and focuses on issues of optimizing accuracy and speed, while reducing the power level. This new, fourth edition emphasizes novel calibration concepts, the specific requirements of systems, the consequences of advanced technology and the need for a more statistical approach to accuracy. Pedagogical enhancements to this edition include additional, new exercises, solved examples to introduce all key, new concepts and warnings, remarks and hints, from a practitioner's perspective, wherever appropriate. Considerable background information and practical tips, from designing a PCB, to lay-out aspects, to trade-offs on system level, complement the discussion of basic principles, making this book a valuable reference for the experienced engineer.
Download or read book Advanced Data Converters written by Gabriele Manganaro and published by Cambridge University Press. This book was released on 2011-11-17 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Need to get up to speed quickly on the latest advances in high performance data converters? Want help choosing the best architecture for your application? With everything you need to know about the key new converter architectures, this guide is for you. It presents basic principles, circuit and system design techniques and associated trade-offs, doing away with lengthy mathematical proofs and providing intuitive descriptions upfront. Everything from time-to-digital converters to comparator-based/zero-crossing ADCs is covered and each topic is introduced with a short summary of the essential basics. Practical examples describing actual chips, along with extensive comparison between architectural or circuit options, ease architecture selection and help you cut design time and engineering risk. Trade-offs, advantages and disadvantages of each option are put into perspective with a discussion of future trends, showing where this field is heading, what is driving it and what the most important unanswered questions are.
Download or read book Time interleaved Analog to digital Converters for Digital Communications written by Tsung-Heng Tsai and published by . This book was released on 2005 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Speed Data Converters written by Ahmed M.A. Ali and published by IET. This book was released on 2016-08-03 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Speed Data Converters covers high speed data converters from the perspective of a leading high speed ADC designer and architect, with a strong emphasis on high speed Nyquist A/D converters. For our purposes, the term "high speed" is defined as sampling rates that are greater than 10 MS/s. The book is intended for engineers and students who design, evaluate or use high speed data converters. A basic foundation in circuits, devices and signal processing is required. The book is meant to bridge the gap between analysis and design, theory and practice, circuits and systems. It covers basic analog circuits and digital signal processing algorithms. There is a healthy dose of theoretical analysis in this book, combined with the practical issues and intuitive perspectives. Topics covered include: * Introduction to high-speed data conversion * Performance Metrics * Data Converter Architectures * Sampling * Comparators * Amplifiers * Pipelined A/D Converters * Time-interleaved Converters * Digitally Assisted Converters * Evolution and Trends
Download or read book Introduction to Analog to Digital Converters written by Takao Waho and published by CRC Press. This book was released on 2022-09-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog-to-digital (A/D) and digital-to-analog (D/A) converters, or data converters in short, play a critical role as interfaces between the real analog world and digital equipment. They are now indispensable in the field of sensor networks, internet of things (IoT), robots, and automatic driving vehicles, as well as high-precision instrumentation and wideband communication systems. As the world increasingly relies on digital information processing, the importance of data converters continues to increase.The primary purpose of this book is to explain the fundamentals of data converters for students and engineers involved in this fascinating field as a newcomer. The book will also help students who have learned the basics of analog circuit design to understand the state-of-the-art data converters. It is desirable for readers to be familiar with basic analog IC design and digital signal processing using z-transform.
Download or read book Analog to Digital Conversion written by Marcel Pelgrom and published by Springer. This book was released on 2016-09-29 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is appropriate for use in graduate-level curricula in analog-to-digital conversion, as well as for practicing engineers in need of a state-of-the-art reference on data converters. It discusses various analog-to-digital conversion principles, including sampling, quantization, reference generation, nyquist architectures and sigma-delta modulation. This book presents an overview of the state of the art in this field and focuses on issues of optimizing accuracy and speed, while reducing the power level. This new, third edition emphasizes novel calibration concepts, the specific requirements of new systems, the consequences of 22-nm technology and the need for a more statistical approach to accuracy. Pedagogical enhancements to this edition include additional, new exercises, solved examples to introduce all key, new concepts and warnings, remarks and hints, from a practitioner's perspective, wherever appropriate. Considerable background information and practical tips, from designing a PCB, to lay-out aspects, to trade-offs on system level, complement the discussion of basic principles, making this book a valuable reference for the experienced engineer.
Download or read book Design Techniques for Ultra High Speed Time Interleaved Analog to Digital Converters written by Yida Duan and published by . This book was released on 2015 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog-to-Digital Converters (ADCs) serve as the interfaces between the analog natural world and the binary world of computer data. Due to this essential role, ADC circuits have been well studied over 40 years, and many problems associated with them have already been solved. However in recent years, a new species of ADCs has appeared, and since then attracted lots of attention. These are ultra-high-speed (often greater than 40GS/s) time-interleaved ADCs of low or medium resolution (around 6 to 8 bit) built in CMOS processes. Although such ADCs can be used in high-speed electronic measurement equipment and radar systems, the recent driving force behind them is next generation 100Gbps/400Gbps fiber optical transceivers. These transceivers take advantage of ultra-high-speed ADCs and digital-signal-processors (DSPs) to enable ultra-high data-rate communications in long-haul networks (city-to-city, transcontinental, and transoceanic fiber links), metro networks (fibers that connect enterprises in metropolitan areas), and data centers (fiber links within data center infrastructures). At such high sampling rate, massively time-interleaved successive-approximation ADC (SAR ADC) architecture has emerged as the dominant solution due to its excellent power efficiency. Several recent works has demonstrated success in achieving high sampling rate. However, the sampling network has become the bottleneck that limits the input bandwidth in these ADCs. It is apparent that conventional switch-based track-and-hold (T&H) circuit cannot satisfy the >20GHz bandwidth requirement. In addition, it is unclear what the optimal interleaving configuration is. Each state-of-the-art design adopts a different interleaving configuration - from straightforward conventional 1-rank interleaving to 2-rank hierarchical sampling or even 3 ranks. How to partition interleaving factors among different ranks has not yet been investigated. Furthermore, asynchronous SAR sub-ADCs are often used in these designs to push the sampling rate even further. The well-known sparkle-code issues caused by comparator meta-stability in asynchronous SARs can significantly increase the Bit-Error-Rate (BER) of the transceivers unless power hungry error correction coding are implemented in the system. Although many works in the literature attempted to deal with the meta-stability in asynchronous SARs, the effectiveness of these approaches have not been fully demonstrated. In this thesis, I will first propose a new cascode-based T&H circuits to improve the ADC bandwidth beyond the limit of conventional switch-based T&H circuits. Then, a system design and optimization methodology of hierarchical time-interleaved sampling network is presented in the context of cascode T&H. To deal with sparkle-code issue in asynchronous SAR sub-ADCs, a new back-end meta-stability correction technique is employed. An extensive statistical analysis is provided to verify the correction algorithm can greatly reduce sparkle-code error-rates. To further demonstrate the effectiveness of the proposed circuits and techniques, two prototype ADCs have been implemented. The first 7b 12.5GS/s hierarchically time-interleaved ADC in 65nm CMOS process demonstrates 29.4dB SNDR and >25GHz bandwidth. The later 6b 46GS/s ADC in 28nm CMOS employs asynchronous SAR sub-ADC design with back-end meta-stability correction. The measurement results show it achieves sparkle-code error free operation over 1e10 samples in addition to achieving >23GHz bandwidth and 25.2dB SNDR. The power consumption is 381mW from 1.05V/1.6V supplies, and the FOM is 0.56pJ/conversion-step.
Download or read book Time interleaved Analog to digital Converters written by Simon Minze Louwsma and published by . This book was released on 2009 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Time to Digital Converters written by Stephan Henzler and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-electronics and so integrated circuit design are heavily driven by technology scaling. The main engine of scaling is an increased system performance at reduced manufacturing cost (per system). In most systems digital circuits dominate with respect to die area and functional complexity. Digital building blocks take full - vantage of reduced device geometries in terms of area, power per functionality, and switching speed. On the other hand, analog circuits rely not on the fast transition speed between a few discrete states but fairly on the actual shape of the trans- tor characteristic. Technology scaling continuously degrades these characteristics with respect to analog performance parameters like output resistance or intrinsic gain. Below the 100 nm technology node the design of analog and mixed-signal circuits becomes perceptibly more dif cult. This is particularly true for low supply voltages near to 1V or below. The result is not only an increased design effort but also a growing power consumption. The area shrinks considerably less than p- dicted by the digital scaling factor. Obviously, both effects are contradictory to the original goal of scaling. However, digital circuits become faster, smaller, and less power hungry. The fast switching transitions reduce the susceptibility to noise, e. g. icker noise in the transistors. There are also a few drawbacks like the generation of power supply noise or the lack of power supply rejection.
Download or read book CMOS Data Converters for Communications written by Mikael Gustavsson and published by Springer Science & Business Media. This book was released on 2005-12-15 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Data Converters for Communications distinguishes itself from other data converter books by emphasizing system-related aspects of the design and frequency-domain measures. It explains in detail how to derive data converter requirements for a given communication system (baseband, passband, and multi-carrier systems). The authors also review CMOS data converter architectures and discuss their suitability for communications. The rest of the book is dedicated to high-performance CMOS data converter architecture and circuit design. Pipelined ADCs, parallel ADCs with an improved passive sampling technique, and oversampling ADCs are the focus for ADC architectures, while current-steering DAC modeling and implementation are the focus for DAC architectures. The principles of the switched-current and the switched-capacitor techniques are reviewed and their applications to crucial functional blocks such as multiplying DACs and integrators are detailed. The book outlines the design of the basic building blocks such as operational amplifiers, comparators, and reference generators with emphasis on the practical aspects. To operate analog circuits at a reduced supply voltage, special circuit techniques are needed. Low-voltage techniques are also discussed in this book. CMOS Data Converters for Communications can be used as a reference book by analog circuit designers to understand the data converter requirements for communication applications. It can also be used by telecommunication system designers to understand the difficulties of certain performance requirements on data converters. It is also an excellent resource to prepare analog students for the new challenges ahead.
Download or read book Generalized Low Voltage Circuit Techniques for Very High Speed Time Interleaved Analog to Digital Converters written by Sai-Weng Sin and published by Springer Science & Business Media. This book was released on 2010-09-29 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog-to-Digital Converters (ADCs) play an important role in most modern signal processing and wireless communication systems where extensive signal manipulation is necessary to be performed by complicated digital signal processing (DSP) circuitry. This trend also creates the possibility of fabricating all functional blocks of a system in a single chip (System On Chip - SoC), with great reductions in cost, chip area and power consumption. However, this tendency places an increasing challenge, in terms of speed, resolution, power consumption, and noise performance, in the design of the front-end ADC which is usually the bottleneck of the whole system, especially under the unavoidable low supply-voltage imposed by technology scaling, as well as the requirement of battery operated portable devices. Generalized Low-Voltage Circuit Techniques for Very High-Speed Time-Interleaved Analog-to-Digital Converters will present new techniques tailored for low-voltage and high-speed Switched-Capacitor (SC) ADC with various design-specific considerations.
Download or read book Blind Calibration for Time interleaved Analog to digital Converters written by Yuhui Huang and published by . This book was released on 2006 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Background Calibration of Time interleaved Analog to digital Converters written by Shafiq M. Jamal and published by . This book was released on 2001 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
