Download or read book Through Silicon Vias for 3D Integration written by John H. Lau and published by McGraw Hill Professional. This book was released on 2012-08-05 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to TSV and other enabling technologies for 3D integration Written by an expert with more than 30 years of experience in the electronics industry, Through-Silicon Vias for 3D Integration provides cutting-edge information on TSV, wafer thinning, thin-wafer handling, microbumping and assembly, and thermal management technologies. Applications to highperformance, high-density, low-power-consumption, wide-bandwidth, and small-form-factor electronic products are discussed. This book offers a timely summary of progress in all aspects of this fascinating field for professionals active in 3D integration research and development, those who wish to master 3D integration problem-solving methods, and anyone in need of a low-power, wide-bandwidth design and high-yield manufacturing process for interconnect systems. Coverage includes: Nanotechnology and 3D integration for the semiconductor industry TSV etching, dielectric-, barrier-, and seed-layer deposition, Cu plating, CMP, and Cu revealing TSVs: mechanical, thermal, and electrical behaviors Thin-wafer strength measurement Wafer thinning and thin-wafer handling Microbumping, assembly, and reliability Microbump electromigration Transient liquid-phase bonding: C2C, C2W, and W2W 2.5D IC integration with interposers 3D IC integration with interposers Thermal management of 3D IC integration 3D IC packaging

Download or read book Through Silicon Vias for 3D Integration written by John Lau and published by McGraw Hill Professional. This book was released on 2012-09-20 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to TSV and other enabling technologies for 3D integration Written by an expert with more than 30 years of experience in the electronics industry, Through-Silicon Vias for 3D Integration provides cutting-edge information on TSV, wafer thinning, thin-wafer handling, microbumping and assembly, and thermal management technologies. Applications to highperformance, high-density, low-power-consumption, wide-bandwidth, and small-form-factor electronic products are discussed. This book offers a timely summary of progress in all aspects of this fascinating field for professionals active in 3D integration research and development, those who wish to master 3D integration problem-solving methods, and anyone in need of a low-power, wide-bandwidth design and high-yield manufacturing process for interconnect systems. Coverage includes: Nanotechnology and 3D integration for the semiconductor industry TSV etching, dielectric-, barrier-, and seed-layer deposition, Cu plating, CMP, and Cu revealing TSVs: mechanical, thermal, and electrical behaviors Thin-wafer strength measurement Wafer thinning and thin-wafer handling Microbumping, assembly, and reliability Microbump electromigration Transient liquid-phase bonding: C2C, C2W, and W2W 2.5D IC integration with interposers 3D IC integration with interposers Thermal management of 3D IC integration 3D IC packaging

Download or read book Handbook of 3D Integration Volume 1 written by Philip Garrou and published by John Wiley & Sons. This book was released on 2011-09-22 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first encompassing treatise of this new, but very important field puts the known physical limitations for classic 2D electronics into perspective with the requirements for further electronics developments and market necessities. This two-volume handbook presents 3D solutions to the feature density problem, addressing all important issues, such as wafer processing, die bonding, packaging technology, and thermal aspects. It begins with an introductory part, which defines necessary goals, existing issues and relates 3D integration to the semiconductor roadmap of the industry. Before going on to cover processing technology and 3D structure fabrication strategies in detail. This is followed by fields of application and a look at the future of 3D integration. The contributions come from key players in the field, from both academia and industry, including such companies as Lincoln Labs, Fraunhofer, RPI, ASET, IMEC, CEA-LETI, IBM, and Renesas.

Download or read book 3D IC Integration and Packaging written by John H. Lau and published by McGraw Hill Professional. This book was released on 2015-07-06 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to 3D IC integration and packaging technology3D IC Integration and Packaging fully explains the latest microelectronics techniques for increasing chip density and maximizing performance while reducing power consumption. Based on a course developed by its author, this practical guide offers real-world problem-solving methods and teaches the trade-offs inherent in making system-level decisions. Explore key enabling technologies such as TSV, thin-wafer strength measurement and handling, microsolder bumping, redistribution layers, interposers, wafer-to-wafer bonding, chip-to-wafer bonding, 3D IC and MEMS, LED, and complementary metal-oxide semiconductor image sensors integration. Assembly, thermal management, and reliability are covered in complete detail.3D IC Integration and Packaging covers:• 3D integration for semiconductor IC packaging• Through-silicon vias modeling and testing• Stress sensors for thin-wafer handling and strength measurement• Package substrate technologies• Microbump fabrication, assembly, and reliability• 3D Si integration• 2.5D/3D IC integration• 3D IC integration with passive interposer• Thermal management of 2.5D/3D IC integration• Embedded 3D hybrid integration• 3D LED and IC integration• 3D MEMS and IC integration• 3D CMOS image sensors and IC integration• PoP, chip-to-chip interconnects, and embedded fan-out WLP

Download or read book Embedded and Fan Out Wafer and Panel Level Packaging Technologies for Advanced Application Spaces written by Beth Keser and published by John Wiley & Sons. This book was released on 2021-12-29 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover an up-to-date exploration of Embedded and Fan-Out Waver and Panel Level technologies In Embedded and Fan-Out Wafer and Panel Level Packaging Technologies for Advanced Application Spaces: High Performance Compute and System-in-Package, a team of accomplished semiconductor experts delivers an in-depth treatment of various fan-out and embedded die approaches. The book begins with a market analysis of the latest technology trends in Fan-Out and Wafer Level Packaging before moving on to a cost analysis of these solutions. The contributors discuss the new package types for advanced application spaces being created by companies like TSMC, Deca Technologies, and ASE Group. Finally, emerging technologies from academia are explored. Embedded and Fan-Out Wafer and Panel Level Packaging Technologies for Advanced Application Spaces is an indispensable resource for microelectronic package engineers, managers, and decision makers working with OEMs and IDMs. It is also a must-read for professors and graduate students working in microelectronics packaging research.

Download or read book Wafer Level 3 D ICs Process Technology written by Chuan Seng Tan and published by Springer Science & Business Media. This book was released on 2009-06-29 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on foundry-based process technology that enables the fabrication of 3-D ICs. The core of the book discusses the technology platform for pre-packaging wafer lever 3-D ICs. However, this book does not include a detailed discussion of 3-D ICs design and 3-D packaging. This is an edited book based on chapters contributed by various experts in the field of wafer-level 3-D ICs process technology. They are from academia, research labs and industry.

Download or read book Three Dimensional System Integration written by Antonis Papanikolaou and published by Springer Science & Business Media. This book was released on 2010-12-07 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-dimensional (3D) integrated circuit (IC) stacking is the next big step in electronic system integration. It enables packing more functionality, as well as integration of heterogeneous materials, devices, and signals, in the same space (volume). This results in consumer electronics (e.g., mobile, handheld devices) which can run more powerful applications, such as full-length movies and 3D games, with longer battery life. This technology is so promising that it is expected to be a mainstream technology a few years from now, less than 10-15 years from its original conception. To achieve this type of end product, changes in the entire manufacturing and design process of electronic systems are taking place. This book provides readers with an accessible tutorial on a broad range of topics essential to the non-expert in 3D System Integration. It is an invaluable resource for anybody in need of an overview of the 3D manufacturing and design chain.

Download or read book Handbook of 3D Integration Volumes 1 and 2 written by Philip Garrou and published by John Wiley & Sons. This book was released on 2012-10-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first encompassing treatise of this new and very important field puts the known physical limitations for classic 2D microelectronics into perspective with the requirements for further microelectronics developments and market necessities. This two-volume handbook presents 3D solutions to the feature density problem, addressing all important issues, such as wafer processing, die bonding, packaging technology, and thermal aspects. It begins with an introductory part, which defines necessary goals, existing issues and relates 3D integration to the semiconductor roadmap of the industry. Before going on to cover processing technology and 3D structure fabrication strategies in detail. This is followed by fields of application and a look at the future of 3D integration. The editors have assembled contributions from key academic and industrial players in the field, including Intel, Micron, IBM, Infineon, Qimonda, NXP, Philips, Toshiba, Semitool, EVG, Tezzaron, Lincoln Labs, Fraunhofer, RPI, IMEC, CEA-LETI and many others.

Download or read book 3D Integration for NoC based SoC Architectures written by Abbas Sheibanyrad and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the research challenges that are due to the introduction of the 3rd dimension in chips for researchers and covers the whole architectural design approach for 3D-SoCs. Nowadays the 3D-Integration technologies, 3D-Design techniques, and 3D-Architectures are emerging as interesting, truly hot, broad topics. The present book gathers the recent advances in the whole domain by renowned experts in the field to build a comprehensive and consistent book around the hot topics of three-dimensional architectures and micro-architectures. This book includes contributions from high level international teams working in this field.

Download or read book Strain Effect in Semiconductors written by Yongke Sun and published by Springer Science & Business Media. This book was released on 2009-11-14 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strain Effect in Semiconductors: Theory and Device Applications presents the fundamentals and applications of strain in semiconductors and semiconductor devices that is relevant for strain-enhanced advanced CMOS technology and strain-based piezoresistive MEMS transducers. Discusses relevant applications of strain while also focusing on the fundamental physics pertaining to bulk, planar, and scaled nano-devices. Hence, this book is relevant for current strained Si logic technology as well as for understanding the physics and scaling for future strained nano-scale devices.

Download or read book Heterogeneous Integrations written by John H. Lau and published by Springer. This book was released on 2019-04-03 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous integration uses packaging technology to integrate dissimilar chips, LED, MEMS, VCSEL, etc. from different fabless houses and with different functions and wafer sizes into a single system or subsystem. How are these dissimilar chips and optical components supposed to talk to each other? The answer is redistribution layers (RDLs). This book addresses the fabrication of RDLs for heterogeneous integrations, and especially focuses on RDLs on: A) organic substrates, B) silicon substrates (through-silicon via (TSV)-interposers), C) silicon substrates (bridges), D) fan-out substrates, and E) ASIC, memory, LED, MEMS, and VCSEL systems. The book offers a valuable asset for researchers, engineers, and graduate students in the fields of semiconductor packaging, materials sciences, mechanical engineering, electronic engineering, telecommunications, networking, etc.

Download or read book Advanced MEMS Packaging written by John H. Lau and published by McGraw Hill Professional. This book was released on 2009-10-22 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to 3D MEMS packaging methods and solutions Written by experts in the field, Advanced MEMS Packaging serves as a valuable reference for those faced with the challenges created by the ever-increasing interest in MEMS devices and packaging. This authoritative guide presents cutting-edge MEMS (microelectromechanical systems) packaging techniques, such as low-temperature C2W and W2W bonding and 3D packaging. This definitive resource helps you select reliable, creative, high-performance, robust, and cost-effective packaging techniques for MEMS devices. The book will also aid in stimulating further research and development in electrical, optical, mechanical, and thermal designs as well as materials, processes, manufacturing, testing, and reliability. Among the topics explored: Advanced IC and MEMS packaging trends MEMS devices, commercial applications, and markets More than 360 MEMS packaging patents and 10 3D MEMS packaging designs TSV for 3D MEMS packaging MEMS wafer thinning, dicing, and handling Low-temperature C2C, C2W, and W2W bonding Reliability of RoHS-compliant MEMS packaging Micromachining and water bonding techniques Actuation mechanisms and integrated micromachining Bubble switch, optical switch, and VOA MEMS packaging Bolometer and accelerameter MEMS packaging Bio-MEMS and biosensor MEMS packaging RF MEMS switches, tunable circuits, and packaging

Download or read book Handbook of 3D Integration Volume 4 written by Paul D. Franzon and published by John Wiley & Sons. This book was released on 2019-01-25 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth volume of the landmark handbook focuses on the design, testing, and thermal management of 3D-integrated circuits, both from a technological and materials science perspective. Edited and authored by key contributors from top research institutions and high-tech companies, the first part of the book provides an overview of the latest developments in 3D chip design, including challenges and opportunities. The second part focuses on the test methods used to assess the quality and reliability of the 3D-integrated circuits, while the third and final part deals with thermal management and advanced cooling technologies and their integration.

Download or read book Wireless Interface Technologies for 3D IC and Module Integration written by Tadahiro Kuroda and published by Cambridge University Press. This book was released on 2021-09-30 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesising fifteen years of research, this authoritative text provides a comprehensive treatment of two major technologies for wireless chip and module interface design, covering technology fundamentals, design considerations and tradeoffs, practical implementation considerations, and discussion of practical applications in neural network, reconfigurable processors, and stacked SRAM. It explains the design principles and applications of two near-field wireless interface technologies for 2.5-3D IC and module integration respectively, and describes system-level performance benefits, making this an essential resource for researchers, professional engineers and graduate students performing research in next-generation wireless chip and module interface design.

Download or read book Design And Modeling For 3d Ics And Interposers written by Madhavan Swaminathan and published by World Scientific. This book was released on 2013-11-05 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Integration is being touted as the next semiconductor revolution. This book provides a comprehensive coverage on the design and modeling aspects of 3D integration, in particularly, focus on its electrical behavior. Looking from the perspective the Silicon Via (TSV) and Glass Via (TGV) technology, the book introduces 3DICs and Interposers as a technology, and presents its application in numerical modeling, signal integrity, power integrity and thermal integrity. The authors underscored the potential of this technology in design exchange formats and power distribution.

Download or read book 3D IC Stacking Technology written by Banqiu Wu and published by McGraw Hill Professional. This book was released on 2011-10-14 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest advances in three-dimensional integrated circuit stacking technology With a focus on industrial applications, 3D IC Stacking Technology offers comprehensive coverage of design, test, and fabrication processing methods for three-dimensional device integration. Each chapter in this authoritative guide is written by industry experts and details a separate fabrication step. Future industry applications and cutting-edge design potential are also discussed. This is an essential resource for semiconductor engineers and portable device designers. 3D IC Stacking Technology covers: High density through silicon stacking (TSS) technology Practical design ecosystem for heterogeneous 3D IC products Design automation and TCAD tool solutions for through silicon via (TSV)-based 3D IC stack Process integration for TSV manufacturing High-aspect-ratio silicon etch for TSV Dielectric deposition for TSV Barrier and seed deposition Copper electrodeposition for TSV Chemical mechanical polishing for TSV applications Temporary and permanent bonding Assembly and test aspects of TSV technology

Download or read book Design of 3D Integrated Circuits and Systems written by Rohit Sharma and published by CRC Press. This book was released on 2018-09-03 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-dimensional (3D) integration of microsystems and subsystems has become essential to the future of semiconductor technology development. 3D integration requires a greater understanding of several interconnected systems stacked over each other. While this vertical growth profoundly increases the system functionality, it also exponentially increases the design complexity. Design of 3D Integrated Circuits and Systems tackles all aspects of 3D integration, including 3D circuit and system design, new processes and simulation techniques, alternative communication schemes for 3D circuits and systems, application of novel materials for 3D systems, and the thermal challenges to restrict power dissipation and improve performance of 3D systems. Containing contributions from experts in industry as well as academia, this authoritative text: Illustrates different 3D integration approaches, such as die-to-die, die-to-wafer, and wafer-to-wafer Discusses the use of interposer technology and the role of Through-Silicon Vias (TSVs) Presents the latest improvements in three major fields of thermal management for multiprocessor systems-on-chip (MPSoCs) Explores ThruChip Interface (TCI), NAND flash memory stacking, and emerging applications Describes large-scale integration testing and state-of-the-art low-power testing solutions Complete with experimental results of chip-level 3D integration schemes tested at IBM and case studies on advanced complementary metal–oxide–semiconductor (CMOS) integration for 3D integrated circuits (ICs), Design of 3D Integrated Circuits and Systems is a practical reference that not only covers a wealth of design issues encountered in 3D integration but also demonstrates their impact on the efficiency of 3D systems.