Download or read book Transport Phenomena in Porous Media III written by Derek B Ingham and published by Elsevier. This book was released on 2005-07-29 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid and flow problems in porous media have attracted the attention of industrialists, engineers and scientists from varying disciplines, such as chemical, environmental, and mechanical engineering, geothermal physics and food science. There has been a increasing interest in heat and fluid flows through porous media, making this book a timely and appropriate resource.Each chapter is systematically detailed to be easily grasped by a research worker with basic knowledge of fluid mechanics, heat transfer and computational and experimental methods. At the same time, the readers will be informed of the most recent research literature in the field, giving it dual usage as both a post-grad text book and professional reference.Written by the recent directors of the NATO Advanced Study Institute session on 'Emerging Technologies and Techniques in Porous Media' (June 2003), this book is a timely and essential reference for scientists and engineers within a variety of fields.

Download or read book Transport Phenomena in Fuel Cells written by Bengt Sundén and published by WIT Press. This book was released on 2005 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are expected to play a significant role in the next generation of energy systems and road vehicles for transportation. However, substantial progress is required in reducing manufacturing costs and improving performance. This book aims to contribute to the understanding of the transport processes in solid oxide fuel cells (SOFC), proton exchange membrane fuel cells (PEMFC) and direct methanol fuel cells (DMFC), which are of current interest. A wide range of topics is covered, featuring contributions from prominent scientists and engineers in the field. A detailed summary of state-of-the-art knowledge and future needs, this text will be of value to graduate students and researchers working on the development of fuel cells within academia and industry.

Download or read book PEM Fuel Cells written by Jasna Jankovic and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-05-22 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive introduction to the rapidly developing field of modeling and characterization of PEM fuel cells. It focuses on i) fuel cell performance modeling and performance characterization applicable from single cells to stacks, ii) fundamental and advanced techniques for structural and compositional characterization of fuel cell components and iii) electrocatalyst design. Written by experts in this field, this book is an invaluable tool for graduate students and professionals.

Download or read book Analytical Modelling of Fuel Cells written by Andrei A. Kulikovsky and published by Elsevier. This book was released on 2010-06-29 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: In fuel cell research, the gap between fundamental electrochemical processes and the engineering of fuel cell systems is bridged by the physical modelling of fuel cells. This relatively new discipline aims to understand the basic transport and kinetic phenomena in a real cell and stack environment, paving the way for improved design and performance. The author brings his unique approach to the analytical modeling of fuel cells to this essential reference for energy technologists. - Covers recent advances and analytical solutions to a range of problems faced by energy technologists, from catalyst layer performance to thermal stability - Provides detailed graphs, charts and other tools (glossary, index) to maximize R&D output while minimizing costs and time spent on dead-end research - Presents Kulikovsky's signature approach (and the data to support it)—which uses "simplified" models based on idealized systems, basic geometries, and minimal assumptions—enabling qualitative understanding of the causes and effects of phenomena

Download or read book Advances in Computational Heat and Mass Transfer written by Ali Cemal Benim and published by Springer Nature. This book was released on with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Analysis of PEM Fuel Cell Stack Design written by Ahmet Evren Firat and published by Cuvillier Verlag. This book was released on 2016-06-02 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer electrolyte membrane (PEM) fuel cell stack was analyzed from a mechanical point of view with the help of measurements and simulations in this study. The deflection of the fuel cell stack was measured with the help of the experimental set-up under operating conditions. The effects of cell operating parameters and cyclic conditions on the mechanical properties of the fuel cell stack were investigated. In order to extend the mechanical analysis of the fuel cells, two computational models were established containing the geometrical features in detail. A large-scale fuel cell stack model was built for the thermomechanical analysis. The second model was built on a cross-section geometry for the electrochemical analysis including fluid dynamics. The internal stress distribution and buckling of fuel cell stack were examined. The influence of the mechanical compression on the cell performance and squeezing of the gas diffusion layers are investigated. A design procedure is developed for fuel cell stack regarding the durability and performance from a mechanical point of view.

Download or read book Proceedings of the 10th Hydrogen Technology Convention Volume 1 written by Hexu Sun and published by Springer Nature. This book was released on 2024-02-13 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book highlights the latest advances in fundamental research, technologies and applications of hydrogen energy and fuel cells. In recent years, energy conversion between electricity and hydrogen energy has attracted increasing attention as a way to adjust the load of the grid. This book discusses and exchanges cutting-edge findings and technological developments in fields such as new proton exchange membrane electrolyzers, new electrode materials and catalysts, renewable energy, off-grid/grid-connected water electrolysis for hydrogen production, key materials and components of fuel cells, high-temperature solid oxide water electrolysis, energy storage technologies and research, CO2 hydrogenation to methanol, nitrogen to ammonia and other applications with industrial potential. The main topics of the proceedings include: 1) Policies and strategies for hydrogen energy and fuel cells; 2) Advanced proton exchange membranes, electrodes and catalyst materials for water electrolysis; 3) Advanced hydrogen compression, storage, transportation and distribution technologies; 4) Safety and related standards; 5) Manufacture and R&D of key materials and components of fuel cells and stack systems.

Download or read book Fuel Cell Seminar 2008 written by M. Williams and published by The Electrochemical Society. This book was released on 2009-05 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this issue of ECS Transactions were originally presented at the 2008 Fuel Cell Seminar & Exposition, held in Phoenix, Arizona, October 27 to October 31, 2008.

Download or read book Introduction to Transfer Phenomena in PEM Fuel Cells written by Bilal Abderezzak and published by Elsevier. This book was released on 2018-11-13 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Transfer Phenomena in PEM Fuel Cells presents the fruit of several years of research in the area of fuel cells. The book illustrates the transfer phenomena occurring inside a single cell and describes the technology field of hydrogen, explicitly the production, storage and risk management of hydrogen as an energy carrier. Several applications of hydrogen are also cited, and special interest is dedicated to the PEM Fuel Cell. Mass, charge and heat transfer phenomena are also discussed in this great resource that includes explanations, illustrations and governing equations for each section. - Illustrates transfer phenomena occurring within a single cell - Describes the technological field of hydrogen (production, storage, and risk and management) - Introduces the various applications of hydrogen - Presents mass transfer, charge and heat phenomena

Download or read book CFD Modeling and Simulation in Materials Processing written by Laurentiu Nastac and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA, March 11-15, 2012

Download or read book Reduced Modelling of Planar Fuel Cells written by Zhongjie He and published by Springer. This book was released on 2016-12-25 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on novel reduced cell and stack models for proton exchange membrane fuel cells (PEMFCs) and planar solid oxide fuel cells (P-SOFCs) that serve to reduce the computational cost by two orders of magnitude or more with desired numerical accuracy, while capturing both the average properties and the variability of the dependent variables in the 3D counterparts. The information provided can also be applied to other kinds of plate-type fuel cells whose flow fields consist of parallel plain channels separated by solid ribs. These fast and efficient models allow statistical sensitivity analysis for a sample size in the order of 1000 without prohibitive computational cost to be performed to investigate not only the individual, but also the simultaneous effects of a group of varying geometrical, material, and operational parameters. This provides important information for cell/stack design, and to illustrate this, Monte Carlo simulation of the reduced P-SOFC model is conducted at both the single-cell and stack levels.

Download or read book Electrochemical Cell Calculations with OpenFOAM written by Steven Beale and published by Springer Nature. This book was released on 2022-05-06 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book is at the nexus of modern software programming practices and electrochemical process engineering. It is the authoritative text on developing open source software for many applications, including: • fuel cells; • electrolyzers; and • batteries. Written by experts in the field in the open source computational fluid dynamics (CFD) code suite OpenFOAM, this book is intended for process engineering professionals developing practical electrochemical designs for industry, as well as researchers focused on finding tomorrow’s answers today. The book covers everything from micro-scale to cell-scale to stack-scale models, with numerous illustrations and programming examples. Starting from a clear explanation of electrochemical processes and simple illustrative examples, the book progresses in complexity through a range of diverse applications. After reading this book, the reader is able to take command and control of model development as an expert. The book is aimed at all engineers and scientists with basic knowledge of calculus and programming in C++.

Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.

Download or read book The 6th Mechanical Engineering Science and Technology MEST 2022 International Conference written by Taurista Perdana Syawitri and published by Springer Nature. This book was released on 2023-04-16 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. MEST2022 invites all potential authors from universities and various organisations to submit papers in the area of mechanical, manufacturing, materials sciences and related interdisciplinary engineering fields. This conference is part of a conference program called International Summit on Science Technology and Humanity (ISETH) 2022 Organized by Universitas Muhammadiyah Surakarta. The 6th Mechanical Engineering, Science and Technology (MEST2022) International conference is an annual the Mechanical Department of Universitas Muhammadiyah Surakarta event. All possible writers from universities and other organizations are invited to submit papers. The conference is a forum for academic exchange that provides a prompt presentation of articles on experimental, numerical, and theoretical studies that shed light on the critical topics of mechanical, thermal, fluid, and aerothermodynamics internal flow, heat and mass transfer, multiphase flow, turbulence modelling, combustion, engineering thermodynamics, thermophysical properties of matter, measurement, and visualization techniques. Contributions range from intriguing and significant research immediately applicable to industry development or practice to high-level student textbooks, explanations, distribution of technology, and good practice.

Download or read book Mini Micro Fuel Cells written by S. Kakaç and published by Springer Science & Business Media. This book was released on 2008-04-10 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains an archival record of the NATO Advanced Institute on Mini – Micro Fuel Cells – Fundamental and Applications held in Çesme – Izmir, Turkey, July 22–August 3, 2007. The ASIs are intended to be a high-level teaching activity in scientific and technical areas of current concern. In this volume, the reader may find interesting chapters on Mini- Micro Fuel Cells with fundamentals and applications. In recent years, fu- cell development, modeling and performance analysis has received much attention due to their potential for distributed power which is a critical issue for energy security and the environmental protection. Small fuel cells for portable applications are important for the security. The portable devices (many electronic and wireless) operated by fuel cells for providing all-day power, are very valuable for the security, for defense and in the war against terrorism. Many companies in NATO and non-NATO countries have concentrated to promote the fuel cell industry. Many universities with industrial partners committed to the idea of working together to develop fuel cells. As tech- logy advanced in the 1980s and beyond, many government organizations joined in spending money on fuel-cell research. In recent years, interest in using fuel cells to power portable electronic devices and other small equipment (cell phones, mobile phones, lab-tops, they are used as micro power source in biological applications) has increased partly due to the promise of fuel cells having higher energy density.

Download or read book Proton Exchange Membrane Fuel Cells Modeling written by Fengge Gao and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fuel cell is a potential candidate for energy storage and conversion in our future energy mix. It is able to directly convert the chemical energy stored in fuel (e.g. hydrogen) into electricity, without undergoing different intermediary conversion steps. In the field of mobile and stationary applications, it is considered to be one of the future energy solutions. Among the different fuel cell types, the proton exchange membrane (PEM) fuel cell has shown great potential in mobile applications, due to its low operating temperature, solid-state electrolyte and compactness. This book presents a detailed state of art of PEM fuel cell modeling, with very detailed physical phenomena equations in different physical domains. Examples and a fully coupled multi-physical 1.2 kW PEMFC model are given help the reader better understand how to use the equations.

Download or read book Mechanical Engineering for Sustainable Development State of the Art Research written by C.S.P. Rao and published by CRC Press. This book was released on 2019-01-04 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides valuable insight into diverse topics related to mechanical engineering and presents state-of-the-art work on sustainable development being carried out throughout the world by budding researchers and scientists. Divided into three sections, the volume covers machine design, materials and manufacturing, and thermal engineering. It presents innovative research work on machine design that is of relevance to such varied fields as the automotive industry, agriculture, and human anatomy. The second section addresses materials characterization, an important tool in assessing proper materials for application-oriented jobs, and emerging unconventional machining processes that are important in design engineering for new products and tools. The section on thermal engineering broadly covers the use of viable alternate fuels, such as HHO, biodiesel, etc., with the objective of reducing the burden on petroleum reserves and the environment.