Download or read book Thin Films for Photovoltaic and Related Device Applications Volume 426 written by David Ginley and published by . This book was released on 1996-11-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been considerable progress in the development of thin-film photovoltaic devices with new efficiency records and enhanced durability. These achievements are the result of significant advances in the fundamental understanding of the materials, interfaces and devices. With 18 countries represented, this truly international volume brings together engineers and researchers from academic, industrial and national laboratories worldwide to review different materials systems and address common issues and problems. A wide variety of topics related to the development of thin-film photovoltaic and related devices, including thick-film transistors and materials for flat-panel displays, are addressed. Areas of emphasis include materials synthesis, device fabrication and characterization, and modelling. Topics include: thin-film amorphous silicon devices; thin-film silicon devices; thin-film devices based on copper-indium diselenide; cadmium-telluride devices; transparent conductive oxides and related materials for thin-film devices; and novel concepts for thin-film photovoltaics.
Download or read book Thin Films Stresses and Mechanical Properties VI written by William W. Gerberich and published by . This book was released on 1997 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in the mechanical properties of thin films remains high throughout the world, as evidenced by the large international contingent represented in this book. With regard to stresses, techniques for sorting out residual stress and strain states are becoming more varied and sophisticated. Discussions include Raman scattering, nonlinear acoustic responses and back-scattered electron imaging microscopies, as well as the more standard wafer-bending and X-ray techniques. Spectroscopy, indenting and the burgeoning field of nanoprobe imaging for the characterization of mechanical properties of thin films are also highlighted. Topics include: mechanical properties of films and multilayers; fracture and adhesion; nanoindentation of films and surfaces; mechanical property methods and modelling; tribological properties of thin films; properties of polymer films; stress effects in thin films and interconnects; epitaxy and strain relief mechanisms, measurements.
Download or read book Thin Films Stresses and Mechanical Properties VI written by Shefford P. Baker and published by Materials Research Society. This book was released on 1996-02-11 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in the mechanical properties of thin films remains high throughout the world, as evidenced by the large international contingent represented in this book. With regard to stresses, techniques for sorting out residual stress and strain states are becoming more varied and sophisticated. Discussions include Raman scattering, nonlinear acoustic responses and back-scattered electron imaging microscopies, as well as the more standard wafer-bending and X-ray techniques. Spectroscopy, indenting and the burgeoning field of nanoprobe imaging for the characterization of mechanical properties of thin films are also highlighted. Topics include: mechanical properties of films and multilayers; fracture and adhesion; nanoindentation of films and surfaces; mechanical property methods and modelling; tribological properties of thin films; properties of polymer films; stress effects in thin films and interconnects; epitaxy and strain relief mechanisms, measurements.
Download or read book Thin Films Structure and Morphology Volume 441 written by Steven C. Moss and published by . This book was released on 1997-07-29 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: An interdisciplinary group of materials scientists, physicists, chemists and engineers come together in this book to discuss recent advances in the structure and morphology of thin films. Both scientific and technological issues are addressed. Work on thin films for a host of applications including microelectronics, optics, tribology, biomedical technologies and microelectromechanical systems (MEMS) are featured. Topics include: kinetics of growth; grain growth; instabilities, segregation and ordering; silicides; metallization; stresses in thin films; deposition and growth simulations; energetic growth processes; diamond films and carbide and nitride films.
Download or read book Glasses and Glass Formers Current Issues Volume 455 written by C. A. Angell and published by . This book was released on 1997-07-08 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together researchers from various backgrounds dealing with the manifestations of the glassy or liquid state of matter, and with the ubiquitous characteristics of the structure and dynamic properties. The goal of this book is to compare the relative merits of different theoretical, computational and experimental approaches to the subject, and to promote the exchange of ideas between the individual disciplines. Papers reflect state-of-the-art knowledge on processes involved in glass formation, and on the relationships between structure and properties of glass-forming liquids, synthetic polymers and biopolymers. Emphasis is on novel experimental techniques, developments in computational methods, and on recent theoretical models which are improving the understanding of the observed phenomena. Topics include: short-time dynamics; relaxation dynamics of glasses and glass formers; glass-like systems, simulations and models; contrasting metallic, ionic, bio and polymer systems; structure, energetics and polyamorphism; and structure and dynamics of glasses and glass formers.
Download or read book Materials for Mechanical and Optical Microsystems Volume 444 written by Michael L. Reed and published by . This book was released on 1997-03-30 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of 33 reviewed papers explore the materials aspects of microsystems, especially those involving mechanical, optical, and thermal components. The topics include technology for micro- assembling, selective electroless copper metallization of epoxy substrates, an improved auto-adhesion measurement method for micro-machines polysilicon beams, patterned sol-gel structures by micro-molding in capillaries, the experimental analysis of the process of anodic bonding using an evaporated glass layer, the effect of inorganic thin film material processing and properties on stress in silicon piezoresistive pressure sensors, and photoconductivity in vacuum-deposited films of silicon-based polymers. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Microporous and Macroporous Materials Volume 431 written by Raul F. Lobo and published by . This book was released on 1996-11-05 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Compound Semiconductor Electronics and Photonics Volume 421 written by R. J. Shul and published by . This book was released on 1996-10-14 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-V semiconductors have continued to find new applications in optical data transmission, full-color displays, automotive electronics and personal communication systems. Complex epitaxial growth, processing, device design and circuit architecture are all necessary for realization of these elements. This book brings together the diverse group of scientists and researchers that are required to develop the next-generation devices. The wide bandgap nitrides, GaN, AlN, InN and their alloys are featured. The commercial availability of blue- and green-light-emitting diodes based on the InGaN/AlGaN system, and the recent announcement of pulsed operation of a laser diode, have stimulated interest in the growth, characterization and processing of these materials. Potential applications in high-temperature/high-power electronics appear promising because of the good transport properties of these nitrides. Topics include: growth and characterization; photonics and processing; electronics and processing; wide bandgap semiconductors and novel devices and processing.
Download or read book Spectroscopic Ellipsometry for Photovoltaics written by Hiroyuki Fujiwara and published by Springer. This book was released on 2019-01-10 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a basic understanding of spectroscopic ellipsometry, with a focus on characterization methods of a broad range of solar cell materials/devices, from traditional solar cell materials (Si, CuInGaSe2, and CdTe) to more advanced emerging materials (Cu2ZnSnSe4, organics, and hybrid perovskites), fulfilling a critical need in the photovoltaic community. The book describes optical constants of a variety of semiconductor light absorbers, transparent conductive oxides and metals that are vital for the interpretation of solar cell characteristics and device simulations. It is divided into four parts: fundamental principles of ellipsometry; characterization of solar cell materials/structures; ellipsometry applications including optical simulations of solar cell devices and online monitoring of film processing; and the optical constants of solar cell component layers.
Download or read book Low Dielectric Constant Materials II Volume 443 written by André Lagendijk and published by . This book was released on 1997-08-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-dielectric constant materials are needed to improve the performance and speed of future integrated circuits. In fact, the diversity of contributors to this book is testimony to the global significance of the topic to the future of semiconductor manufacturing. Presentations include those by semiconductor equipment manufacturers and chemical source suppliers, academia from six countries, four government laboratories and five major device manufacturers. Approaches to designing and implementing reduction in dielectric constant for intermetal dielectric materials are featured and range from the evolution of silicon dioxide to fluorinated silicate glass, to the use of inorganic/organic polymers and spin-on-material, to fluorinated diamond-like carbon and nanoporous silica. The book also addresses the practical aspects of the use of low-dielectric constant materials such as chemical mechanical polishing of these materials and optimization of wiring delays in devices utilizing low-k material.
Download or read book Thin Film Device Applications written by Kasturi Chopra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-dimensional materials created ab initio by the process of condensation of atoms, molecules, or ions, called thin films, have unique properties significantly different from the corresponding bulk materials as a result of their physical dimensions, geometry, nonequilibrium microstructure, and metallurgy. Further, these characteristic features of thin films can be drasti cally modified and tailored to obtain the desired and required physical characteristics. These features form the basis of development of a host of extraordinary active and passive thin film device applications in the last two decades. On the one extreme, these applications are in the submicron dimensions in such areas as very large scale integration (VLSI), Josephson junction quantum interference devices, magnetic bubbles, and integrated optics. On the other extreme, large-area thin films are being used as selective coatings for solar thermal conversion, solar cells for photovoltaic conver sion, and protection and passivating layers. Indeed, one would be hard pressed to find many sophisticated modern optical and electronic devices which do not use thin films in one way or the other. With the impetus provided by industrial applications, the science and technology of thin films have undergone revolutionary development and even today continue to be recognized globally as frontier areas of RID work. Major technical developments in any field of science and technology are invariably accompanied by an explosion of published literature in the form of scientific publications, reviews, and books.
Download or read book Applications of Synchrotron Radiation to III Volume 437 written by Louis J. Terminello and published by . This book was released on 1996-12-03 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: As third-generation synchrotron facilities are constructed and go online in both the United States and around the world, increasingly more applications of synchrotron radiation will be realized. Both basic and applied research possibilities are manyfold, and include studies of solid surfaces and interfaces, electronic materials, metal oxides, glasses, thin films, superconductors, polymers, alloys, multilayer metal systems and intermetallic compounds. In addition, the combination of synchrotron-based spectroscopic techniques, with ever increasing high-resolution microscopy, allows researchers to study very small domains of materials in an attempt to understand their chemical and electronic properties. This book from MRS focuses on the various types of information that can be obtained from synchrotron-related techniques in order to expand the use of this unique and powerful experimental approach to materials research. Topics include: structure of reduced dimensional materials; magnetic materials; microscopy, topography and tomography; X-ray probes of solids; and materials characterization with X-ray absorption.
Download or read book Materials Reliability in Microelectronics VI Volume 428 written by William F. Filter and published by . This book was released on 1996-11-18 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: MRS books on materials reliability in microelectronics have become the snapshot of progress in this field. Reduced feature size, increased speed, and larger area are all factors contributing to the continual performance and functionality improvements in integrated circuit technology. These same factors place demands on the reliability of the individual components that make up the IC. Achieving increased reliability requires an improved understanding of both thin-film and patterned-feature materials properties and their degradation mechanisms, how materials and processes used to fabricate ICs interact, and how they may be tailored to enable reliability improvements. This book focuses on the physics and materials science of microelectronics reliability problems rather than the traditional statistical, accelerated electrical testing aspects. Studies are grouped into three large sections covering electromigration, gate oxide reliability and mechanical stress behavior. Topics include: historical summary; reliability issues for Cu metallization; characterization of electromigration phenomena; modelling; microstructural evolution and influences; oxide and device reliability; thin oxynitride dielectrics; noncontact diagnostics; stress effects in thin films and interconnects and microbeam X-ray techniques for stress measurements.
Download or read book Introduction to Green Chemistry written by Albert Matlack and published by CRC Press. This book was released on 2001-04-03 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: With roughly 5500 references, this book may be considered more of a treatise than a mere introduction to green chemistry. Using an unconventional approach, the author provides a broad but thorough review of the subject, covering traditional green chemistry topics such as catalysis, benign solvents, and alternative feedstocks before moving on to less frequently covered topics such as chemistry of longer wear and population and the environmental chemistry. Topics such as these highlight the importance of chemistry to everyday life and demonstrate the real benefits that wider exploitation of green chemistry can have for society.
Download or read book Ferroelectric Thin Films written by and published by . This book was released on 1996 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Infrared Applications of Semiconductors Volume 450 written by M. Omar Manasreh and published by . This book was released on 1997-03-17 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in that it combines for the first time the infrared detectors and infrared lasers and emitters in one volume. It is merely a step, however, in a very fast-changing field, toward achieving an understanding of novel structures that can be used for high-performance infrared detectors, imaging arrays, infrared lasers and sources. Internationally-known experts discuss recent advances in materials structures, processing and device performances, with presentations crossing materials and discipline boundaries. Recent investigations based on III-V, II-VI and IV bulk semiconductors, quantum wells, and superlattices for long-wavelength infrared detectors, emitters, sources and materials are featured. Topics include: antimonide-related materials and devices; quantum wells and devices; quantum infrared detectors; HgCdTe - materials, devices and processing; nonlinear and parametric oscillator material; interdiffusion in heterostructures and related topics.
Download or read book Scientific Basis for Nuclear Waste Management XX Volume 465 written by Walter J. Gray and published by . This book was released on 1997-07 with total page 1398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features scientific research that supports the safe and effective disposal of radioactive waste in a geological repository. One highlight of the volume is the opening talk by Rustum Roy, who was instrumental in establishing the first symposium on this topic in 1978. Professor Roy summarizes his views of the past 19 years of progress in the field. A second highlight is the participation by several Russian and Ukrainian scientists who authored papers on nuclear waste disposal aspects of the Chernobyl Unit 4 reactor that exploded in April 1986. Additional topics include: glass formulations and properties; glass/water interactions; cements in radioactive waste management; ceramic and crystalline waste forms; spent nuclear fuel; waste processing and treatment; radiation effects in ceramics, glasses and nuclear waste materials; waste package materials; radionuclide solubility and speciation; radionuclide sorption; radionuclide transport; repository backfill; performance assessment; natural analogues and excess plutonium dispositioning.
