Download or read book Bismuth Based High Temperature Superconductors written by Hiroshi Maeda and published by CRC Press. This book was released on 1996-07-09 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of the ongoing investigations on bismuth-based high-temperature cuprate superconductors, integrating scattered research activities and literature from 70 leading scientists throughout the world. The text covers crystal structures and microstructures, reversible or equilibrium magnetic and thermal properties, atomic site tunnel spectroscopy, experimental studies concerning equilibrium phases, and more.
Download or read book High Temperature Superconductors Materials Properties and Applications written by Rainer Wesche and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery by J. G. Bednorz and K. A. Mtllier in 1986 that the superconducting state can exist in oxides at temperatures above 30 K stimulated research in the field of superconductivity and opened up a new field of research. Within a few years a large number of cuprate superconductors with transition temperatures well above the boiling point of liquid nitrogen have been found. The possibility of using liquid nitrogen as coolant re-stimulated interest in power applications of supercon ductivity. In this book an overview of the known high-Te superconductors and their physical properties is presented. Aspects related to conductor fabrication and high-current applications are emphasised. The material should be suitable for use in graduate level courses on superconductivity. Researchers in the field may profit from the large number of tables and references describing its status at the end of 1997. An introduction to high-To superconductivity must be based on the fundamental physical principles of normal-state electrical conductivity and the well-known characteristics of conventional superconductors. In Chapter 2 this background is provided. Crystal structures, anisotropic properties and general trends of the critical temperatures of the cuprate superconductors are described in Chapters 3 and 4. The processing of superconductor powders addressed in Chapter 5 affects considerably the current-carrying capacity of high-T. wires. In Chapter 6 several fabrication techniques for superconducting wires are described. In addition, the factors limiting the transport critical currents ofhigh-Te wires are discussed.
Download or read book Applications of High Tc Superconductivity written by Adir Luiz and published by BoD – Books on Demand. This book was released on 2011-06-27 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of the chapters intended to study only practical applications of HTS materials. You will find here a great number of research on actual applications of HTS as well as possible future applications of HTS. Depending on the strength of the applied magnetic field, applications of HTS may be divided in two groups: large scale applications (large magnetic fields) and small scale applications (small magnetic fields). 12 chapters in the book are fascinating studies about large scale applications as well as small scale applications of HTS. Some chapters are presenting interesting research on the synthesis of special materials that may be useful in practical applications of HTS. There are also research about properties of high-Tc superconductors and experimental research about HTS materials with potential applications. The future of practical applications of HTS materials is very exciting. I hope that this book will be useful in the research of new radical solutions for practical applications of HTS materials and that it will encourage further experimental research of HTS materials with potential technological applications.
Download or read book Applications of High Tc Superconductivity written by Adir Moysés Luiz and published by . This book was released on 2011 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of the chapters intended to study only practical applications of HTS materials. You will find here a great number of research on actual applications of HTS as well as possible future applications of HTS. Depending on the strength of the applied magnetic field, applications of HTS may be divided in two groups: large scale applications (large magnetic fields) and small scale applications (small magnetic fields). 12 chapters in the book are fascinating studies about large scale applications as well as small scale applications of HTS. Some chapters are presenting interesting research on the synthesis of special materials that may be useful in practical applications of HTS. There are also research about properties of high-Tc superconductors and experimental research about HTS materials with potential applications. The future of practical applications of HTS materials is very exciting. I hope that this book will be useful in the research of new radical solutions for practical applications of HTS materials and that it will encourage further experimental research of HTS materials with potential technological applications.
Download or read book High Tc Superconductors written by J. Dumas and published by Elsevier. This book was released on 1993-05-05 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide range of progress in materials development [single crystals, ceramics, thin films, wire and tapes] is reported in the 169 papers in this volume. The main focus of the papers is in attaining a better understanding of the relationship between microstructure and electrical properties. Invited papers cover topics such as the effects of substitution and doping; multilayers; nanostructure characterisation; electric field effects in High Tc Superconductors [HTS]; surface stability; critical currents; flux pinning and magnetooptic imaging of flux patterns; effects of irradiation induced defects; properties and preparation of materials; microwave properties and electronic devices. A clearly broadened basis for understanding processes and mechanisms in [HTS] is portrayed. Appreciable progress has been achieved in the reproducible manufacturing of high quality materials supported by very efficient methods in microstructural analysis. This essential improvement is reflected in the increased number of practical devices encouraging the use of HTS in applications for electronics and power engineering, all of which are reviewed in depth in this work.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superconductor written by Adir Luiz and published by BoD – Books on Demand. This book was released on 2010-08-18 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of works intended to study theoretical and experimental aspects of superconductivity. Here you will find interesting reports on low-Tc superconductors (materials with Tc 30 K), as well as a great number of researches on high-Tc superconductors (materials with Tc 30 K). Certainly this book will be useful to encourage further experimental and theoretical researches in superconducting materials.
Download or read book Processing And Properties Of High tc Superconductors Volume 1 Bulk Materials written by Sungho Jin and published by World Scientific. This book was released on 1991-03-01 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to offer the high-Tc community a comprehensive, state-of-the-art review on bulk processing with the hope that the book would serve in part as an updated review for expert scientists and in part as a reference/text book on processing for young scientists/graduate students and those who wish to keep track of advances and technological trends in HTSC.Readers in the superconductor science/technology/education areas will find this book prepared by the world's leading experts informative and useful.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1994 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Properties Of High Temperature Superconductors Ii written by Donald M Ginsberg and published by World Scientific. This book was released on 1990-02-01 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of Physical Properties of High Temperature Superconductors I, research in the field of high temperature superconductivity has continued at a rapid pace. Volume II will contain chapters on some of the major areas of activity which were not covered extensively in Volume I: structure, microstructure, thermodynamics, oxygen stoichiometry effects, nuclear magnetic and quadrupole resonance, Hall effect, electronic structure, and the pairing state. Like Volume I, it will present authoritative and comprehensive reviews written by recognized experts in the field. This book should be useful to all students, scientists, and engineers who desire to know more about high temperature superconductivity.
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Properties of High Temperature Superconductors written by Rainer Wesche and published by John Wiley & Sons. This book was released on 2015-05-13 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: A much-needed update on complex high-temperaturesuperconductors, focusing on materials aspects; this timely bookcoincides with a recent major break-through of the discovery ofiron-based superconductors. It provides an overview of materials aspects of high-temperaturesuperconductors, combining introductory aspects, description of newphysics, material aspects, and a description of the materialproperties This title is suitable for researchers inmaterials science, physics and engineering. Also for techniciansinterested in the applications of superconductors, e.g. asbiomagnets
Download or read book Physical Properties of High Temperature Superconductors II written by Donald M. Ginsberg and published by World Scientific. This book was released on 1990 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of Physical Properties of High Temperature Superconductors I, research in the field of high temperature superconductivity has continued at a rapid pace. Volume II will contain chapters on some of the major areas of activity which were not covered extensively in Volume I: structure, microstructure, thermodynamics, oxygen stoichiometry effects, nuclear magnetic and quadrupole resonance, Hall effect, electronic structure, and the pairing state. Like Volume I, it will present authoritative and comprehensive reviews written by recognized experts in the field. This book should be useful to all students, scientists, and engineers who desire to know more about high temperature superconductivity.
Download or read book Recent Developments in Superconductivity Research written by Barry P. Martins and published by Nova Publishers. This book was released on 2007 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconductivity is the ability of certain materials to conduct electrical current with no resistance and extremely low losses. High temperature superconductors, such as La2-xSrxCuOx (Tc=40K) and YBa2Cu3O7-x (Tc=90K), were discovered in 1987 and have been actively studied since. In spite of an intense, world-wide, research effort during this time, a complete understanding of the copper oxide (cuprate) materials is still lacking. Many fundamental questions are unanswered, particularly the mechanism by which high-Tc superconductivity occurs. More broadly, the cuprates are in a class of solids with strong electron-electron interactions. An understanding of such "strongly correlated" solids is perhaps the major unsolved problem of condensed matter physics with over ten thousand researchers working on this topic. High-Tc superconductors also have significant potential for applications in technologies ranging from electric power generation and transmission to digital electronics. This ability to carry large amounts of current can be applied to electric power devices such as motors and generators, and to electricity transmission in power lines. For example, superconductors can carry as much as 100 times the amount of electricity of ordinary copper or aluminium wires of the same size. Many universities, research institutes and companies are working to develop high-Tc superconductivity applications and considerable progress has been made. This volume brings together new leading-edge research in the field.
Download or read book Bibliography written by Pierre Villars and published by Walter de Gruyter. This book was released on 2012-12-21 with total page 1827 pages. Available in PDF, EPUB and Kindle. Book excerpt: By browsing about 10 000 000 scientific articles of over 200 major journals mainly in a 'cover to cover approach' some 200 000 publications were selected. The extracted data is part of the following fundamental material research fields: crystal structures (S), phase diagrams (also called constitution) (C) and the comprehensive field of intrinsic physical properties (P). This work has been done systematically starting with the literature going back to 1900. The above mentioned research field codes (S, C, P) as well as the chemical systems investigated in each publication were included in the present work. The aim of the Inorganic Substances Bibliography is to provide researchers with a comprehensive compilation of all up to now published scientific publications on inorganic systems in only three handy volumes.
Download or read book Advances in Superconductivity VII written by Kaoru Yamafuji and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1339 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of high-temperature superconductivity has encouraged an inter disciplinary approach to research. It has required significant cooperation and collaboration among researchers, each of whom has brought to it a rich variety of experience from many other fields. Recently, great improvements have been made in the quality of research. The subject has matured and been launched into the next stage through the resonance between science and technology. The current progress of materials processing and engineering in this field is analogous to that previously seen in the development of semiconductors. These include the appearance of materials taking the place of YBa2Cu307 owing to their improved properties (higher critical temperatures and stronger flux pin ning) in which rare earth ions with large radii (La, Nd, Sm) substitute for Y; the development of technology enabling growth control on the nanometer scale; and precise and reproducible measurements that can be used as rigorous tests of theoretical models, which in turn are expected to lead to the develop ment of new devices. For further progress in high-T research, academics and c technologists must pool their knowledge and experience. I hope that this volume will promote that goal by providing the reader with the latest results of high-temperature superconductor research and will stimulate further discussion and collaboration.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
