Download or read book Thermodynamics and Energy Systems Analysis written by Lucien Borel and published by EPFL Press. This book was released on 2010-06-23 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carefully designed to teach thermodynamics to engineers, this book focuses on the phenomena of irreversibility and the notion of entropy. It also presents a general theory of exergy, with methods of analyse that allow engineers to master problems of current interest in the field of energy management. The authors illustrate practical aspects of the theory by descibiing specific applications such as combustion chambers, turbines, compressors, heat pumps, fuel cells, refrigeration, and more.
Download or read book Routledge Dictionnaire Technique Anglais written by Yves Arden and published by Psychology Press. This book was released on 1994 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: The French-English volume of this highly acclaimed set consists of some 100,000 keywords in both French and English, drawn from the whole range of modern applied science and technical terminology. Covers over 70 subject areas, from engineering and chemistry to packaging, transportation, data processing and much more.
Download or read book Routledge French Technical Dictionary Dictionnaire technique anglais written by Yves Arden and published by Routledge. This book was released on 2013-01-11 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: The French-English volume of this highly acclaimed set consists of some 100,000 keywords in both French and English, drawn from the whole range of modern applied science and technical terminology. Covers over 70 subject areas, from engineering and chemistry to packaging, transportation, data processing and much more.
Download or read book Bibliographic Guide to Refrigeration 1965 1968 written by Sam Stuart and published by Elsevier. This book was released on 2013-10-22 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bibliographic Guide to Refrigeration 1965-1968 is a bibliographic guide to all the documents abstracted in the International Institute of Refrigeration Bulletin during the period 1965-1968. The references include nearly 7,000 reports, articles, and communications, classified according to subjects, and followed by a listing of books. This book is divided into 10 parts and begins with a listing of references on thermodynamics, heat transfer, and other basic physical phenomena relating to refrigeration, including desiccation and measurements of temperature, humidity, and pressure. The next sections are devoted to the physics of low temperatures and cryogenics; production and distribution of cold; refrigerating plants (mainly in the food domain); and refrigerated transport and packaging. Other references deal with air conditioning and heat pumps; and industrial, biological, medical, and agricultural applications of refrigeration. The final section focuses on standards and regulations, economics and statistics, and education and trade activities in the refrigeration industry. This guide is intended to assist researchers, engineers, manufacturers, and operators who are in either constant or occasional contact with the refrigeration domain.
Download or read book Practical Thermodynamic Tools for Heat Exchanger Design Engineers written by Henri Soumerai and published by Wiley-Interscience. This book was released on 1987 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: A useful, effective approach to the design of heat exchanger equipment as is used throughout the mechanical and chemical process industries is provided here. The reader is shown how to apply methods of solution that go beyond the present state-of- the-art for problems with combined heat transfer and fluid flow in a manner that is understandable and acceptable to the average engineer. Offering methods of solutions by covering single-phase flows in non-smooth channels, two-phase flow in condensers and evaporators - over and through tubes of any geometry, the book shows how to apply the methods to practical design. A concious effort is made to relate between the needs of the practising engineer and the work of experimental and mathematical researchers who sometimes fail to appreciate the needs of engineers in industry.
Download or read book Thermodynamique optimale en dimensions physiques finies written by FEIDT Michel and published by Lavoisier. This book was released on 2013-06-01 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: La thermodynamique doit aujourd’hui s’adapter à une problématique plus large, le développement durable. Par le biais d’une approche originale utilisant des outils renouvelés, cet ouvrage apporte des réponses à ce challenge sous deux aspects : - un aspect applicatif, par la méthodologie d'optimisation sous contrainte, qui conduit à des solutions optimales faciles à comparer à l'existant, et dessine les voies et potentiels d'amélioration encore disponibles ; - un aspect fondamental, qui correspond à une vision nouvelle de la thermodynamique des machines et des systèmes. Le livre s'écarte de l'approche classique de thermodynamique de l'équilibre, développée par Carnot, pour adopter une méthode qui allie les descriptions des phénomènes dynamiques de transfert et de conversion. À ces aspects pratiques de la vie courante, s'ajoute une vision plus profonde et fondamentale du monde, en particulier la notion d'évolution, intimement liée au second principe de thermodynamique. L’auteur Ingénieur et physicien, Michel Feidt est enseignant-chercheur en thermodynamique et énergétique à l'université de Lorraine. Il anime aussi une équipe de recherche dédiée aux études des systèmes et procédés énergétiques.
Download or read book Coupled Thermo Hydro Mechanical Processes of Fractured Media written by O. Stephanson and published by Elsevier. This book was released on 1997-02-10 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work brings together the results, information and data that emerged from an international cooperative project, DECOVALEX, 1992-1995. This project was concerned with the mathematical and experimental studies of coupled thermo(T) -hydro(H) -mechanical(M) processes in fractured media related to radioactive waste disposal. The book presents, for the first time, the systematic formulation of mathematical models of the coupled T-H-M processes of fractured media, their validation against theoretical bench-mark tests, and experimental studies at both laboratory and field scales. It also presents, for the first time, a comprehensive analysis of continuum, and discrete approaches to the study of the problems of (as well as a complete description of), the computer codes applied to the studies. The first two chapters provide a conceptual introduction to the coupled T-H-M processes in fractured media and the DECOVALEX project. The next seven chapters give a state-of-the-art survey of the constitutive models of rock fractures and formulation of coupled T-H-M phenomena with continuum and discontinuum approaches, and associated numerical methods. A study on the three generic Bench-Mark Test problems and six Test Case problems of laboratory and field experiments are reported in chapters 10 to 18. Chapter 19 contains lessons learned during the project. The research contained in this book will be valuable for designers, practising engineers and national waste management officials who are concerned with planning, design and performance, and safety assessments of radioactive waste repositories. Researchers and postgraduate students working in this field will also find the book of particular relevance.
Download or read book Energy and Motorization in the Automotive and Aeronautics Industries written by Tomasz Krysinski and published by John Wiley & Sons. This book was released on 2020-09-30 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is intended for students in engineering school or university, young engineers or newcomers in the automotive industry or aeronautics. The objective is to describe in a simple and clear way the problem of energy and motorization for the automobile, helicopters or airplanes. The front-end treatment of these industrial sectors makes it possible to analyze in an original way the similarities and differences of these different means of transport. For this, and based on current technologies and tomorrow, it specifically describes the problem of the energy requirement of cars and aircraft. The result is a search for an ideal motorization associated with the behavior of these different means of transport followed by the analysis of the performances of the various types of engines by covering gas turbines, internal combustion engines and electric motors. Transmission elements such as aerospace gearboxes or gearboxes are described as well as a chapter on energy storage means and their performance including batteries, supercapacitors, inertial or pneumatic storage, hydrogen or fuels from fossil fuels. A final chapter shows the interest and prospects of energy hybridization and electrification for the progressive replacement of fossil fuels. Beyond the technological descriptions, the book focuses on proposing basic sizing rules in order to justify certain performances and to give the reader the means to appropriate the basic know-how of these industrial sectors.
Download or read book Electricity Production from Renewable Energies written by Benoit Robyns and published by John Wiley & Sons. This book was released on 2012-12-13 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy and environmental issues have caused a marked increase in electricity production from renewable energy sources since the beginning of the 21st Century. The concept of sustainable development and concern for future generations challenge us every day to produce new technologies for energy production, and new patterns of use for these energies. Their rapid emergence can make the understanding and therefore the perception of these new technologies difficult. This book aims to contribute to a better understanding of the new electricity generation technologies by addressing a diverse audience. It presents the issues, sources and means of conversion into electricity using a general approach and develops scientific concepts to understand their main technical characteristics. Systems of electricity generation from renewable energy resources of small to medium powers are presented. The basic electrical concepts necessary for understanding the operating characteristics of these energy converters are introduced, and the constraints and problems of integration in the electrical networks of those means of production are discussed. Several exercises are provided to the reader for evaluation purposes. Contents 1. Decentralized Electricity Production from Renewable Energy, Benoît Robyns. 2. Solar Photovoltaic Power, Arnaud Davigny. 3. Wind Power, Bruno Francois and Benoît Robyns. 4. Terrestrial and Marine Hydroelectricity: Waves and Tides, Benoît Robyns and Antoine Henneton. 5. Thermal Power Generation, Jonathan Sprooten. 6. Integration of the Decentralized Production into the Electrical Network, Benoît Robyns.
Download or read book Science et technique des carbones de l nergie aux mat riaux written by DELHAES Pierre and published by Lavoisier. This book was released on 2012-11-21 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: L’atome de carbone a un rôle clé. Il peut former plusieurs types de liaisons chimiques mais également s’auto-associer pour donner un squelette carboné, caractéristiques qui sont à la base de la chimie organique, de la biochimie et de la vie. Science et technique des carbones présente la progression des connaissances dans les solides carbonés à partir des découvertes et inventions successives depuis la préhistoire. Le rôle essentiel joué par l’exploitation des mines de charbon au moment de la première révolution industrielle comme source d’énergie primaire est un point crucial. L’importance du carbone s’est accrue par le développement de la carbochimie pour créer des matériaux artificiels. Leurs utilisations comme matériaux traditionnels de transformation en sidérurgie et comme céramiques particulières, puis technologiques (charbons actifs, fibres de carbone…), sont successivement décrites. La découverte récente des carbones moléculaires, fleurons de la nanotechnologie, met en exergue l’avènement de la technoscience. Finalement, leur impact économique et sociétal est analysé en exposant l’existence de grandes transitions énergétiques associées aux cycles macro-économiques.
Download or read book Progress in Refrigeration Science and Technology written by Sam Stuart and published by Elsevier. This book was released on 2014-05-12 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Refrigeration Science and Technology, Volume I is a collection of papers from the Eleventh International Congress of Refrigeration held in Munich in August-September 1963. These papers deal with the various scientific and technical aspects, designs, and technology of refrigeration. One paper explains technological advances in the use of very low temperature fluids, namely liquid hydrogen and liquid helium as rocket fuels, as bubble chambers, in the study of mesons or hyperons, and in experiments involving the reaction of metals in a wide range of temperature. Another paper examines the requirements for improved food refrigeration and the limitations of certain methods when compared to other cold processing forms. Freeze-drying is also used in biology such as in freeze-drying of biological solutions, tissues, or living organisms. One paper explains the purification method for obtaining very pure hydrogen at high pressures to be used in comparative experiments on the thermodynamical properties of ortho- and para-hydrogen, and their mixtures. Another paper investigates the effect of heat exchange between capillary tube and suction line on the performance of small hermetic compressor systems. This collection is suitable for engineers or technologists in the area of refrigeration, as well as for scientists involved in the space industry and materials research.
Download or read book Molten Salt Techniques written by Robert J. Gale and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume carries on the excellent work of its predecessor, ex tending its scope to other melts and to other techniques. It continues to present first-hand understanding and experience of this difficult and demanding field. There is ever present the trade-off or reconciliation between the novel chemistry of systems not dominated by the mediating influence of a supposedly indifferent solvent and the high temperatures required to effect the fluidity of the system. At the limit, the very high temperatures so increase the rates of all reactions as to dissolve the temporal difference between the thermodynamic and the kinetic view of chemistry. What can happen will happen and invariably does happen. Vessels corrode, the apparatus becomes a reactant, and the number of tolerant materials able to withstand the attack shrinks to graphite, boron carbide or, if all else fails, to frozen parts of the molten salt itself. It is probably true that there is no limit to man's ingenuity but I believe that God gave us molten salts just to test that thesis. If there is ever a Molten Salt Club, and Englishmen love clubs, its membership will be exclusive. It would certainly include the authors of this series. Graham Hills University of Strathclyde ix Preface In the first volume of this series, we expressed our contention that a real need existed for practical guidance in the field of molten salt experimentation.
Download or read book Thermodynamic Formalism written by Mark Pollicott and published by Springer Nature. This book was released on 2021-10-01 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume arose from a semester at CIRM-Luminy on “Thermodynamic Formalism: Applications to Probability, Geometry and Fractals” which brought together leading experts in the area to discuss topical problems and recent progress. It includes a number of surveys intended to make the field more accessible to younger mathematicians and scientists wishing to learn more about the area. Thermodynamic formalism has been a powerful tool in ergodic theory and dynamical system and its applications to other topics, particularly Riemannian geometry (especially in negative curvature), statistical properties of dynamical systems and fractal geometry. This work will be of value both to graduate students and more senior researchers interested in either learning about the main ideas and themes in thermodynamic formalism, and research themes which are at forefront of research in this area.
Download or read book Thermodynamic and Thermophysical Properties of Combustion Products Computation methods written by Vi︠a︡cheslav Evgenʹevich Alemasov and published by Keter Publishing House. This book was released on 1974 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: On a suburban street, two masked men seize a young woman. They bind and gag her and take her to an abandoned, soundproofed apartment. She is Alice Creed, daughter of a millionaire. Her kidnappers, the coldly efficient Vic and his younger accomplice Danny, have worked out a meticulous plan. But Alice is not going to play the perfect victim; she's not giving in without a fight.
Download or read book Production d nergie lectrique partir des sources renouvelables Coll Sciences et technologies de l nergie lectrique written by ROBYNS Benoît and published by Lavoisier. This book was released on 2012-05-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Les questions de développement durable et de projection des besoins futurs favorisent l'apparition de nouvelles technologies de production d'énergie et entraînent un changement de comportement des usagers. Ce livre contribue à une meilleure appréhension de ces technologies émergentes de production d'électricité. Il analyse leurs enjeux, leurs sources et leurs moyens de conversion électrique. Suivant une approche didactique et générale, cet ouvrage présente : - les systèmes de production d'électricité à partir de ressources énergétiques renouvelables des petites aux moyennes puissances (jusque 100 à 200 MW), - les notions électrotechniques de base nécessaire à la compréhension des caractéristiques de fonctionnement de ces convertisseurs, - les contraintes et problèmes d'intégration dans les réseaux électriques de ces moyens de production.
Download or read book Thermodynamic Optimization of Complex Energy Systems written by Adrian Bejan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive assessment of the methodologies of thermodynamic optimization, exergy analysis and thermoeconomics, and their application to the design of efficient and environmentally sound energy systems. The chapters are organized in a sequence that begins with pure thermodynamics and progresses towards the blending of thermodynamics with other disciplines, such as heat transfer and cost accounting. Three methods of analysis stand out: entropy generation minimization, exergy (or availability) analysis, and thermoeconomics. The book reviews current directions in a field that is both extremely important and intellectually alive. Additionally, new directions for research on thermodynamics and optimization are revealed.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
