Download or read book Chemical Thermodynamics of Materials written by Svein Stølen and published by John Wiley & Sons. This book was released on 2004-06-25 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction, examining both macroscopic and microscopic aspects of the subject, the book applies the theory of thermodynamics to a broad range of materials; from metals, ceramics and other inorganic materials to geological materials. Focusing on materials rather than the underlying mathematical concepts of the subject, this book will be ideal for the non-specialist requiring an introduction to the energetics and stability of materials. Macroscopic thermodynamic properties are linked to the underlying miscroscopic nature of the materials and trends in important properties are discussed. A unique approach covering both macroscopic and microscopic aspects of the subject Authors have worldwide reputations in this area Fills a gap in the market by featuring a wide range of real up-to-date examples and covering a large amount of materials

Download or read book Phase equilibrium Relations of the Common Rock forming Oxides Except Water written by George Washington Morey and published by . This book was released on 1964 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Silicate Glasses and Melts written by Bjorn Mysen and published by Elsevier. This book was released on 2018-11-27 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicate Glasses and Melts, Second Edition describes the structure-property-composition relationships for silicate glasses and melts from a geological and industrial perspective. Updated sections include (i) characterization of silicate melt and COHN fluid structure (with and without dissolved silicate components) with pressure, temperature, and redox conditions and responses of structural variables to chemical composition, (ii) determination of solubility and solution mechanisms of COHN volatiles in silicate melts and minerals and of solubility and solution mechanisms of silicate components in COHN fluids, and (iii) effects of very high pressure on structure and properties of melts and glasses. This new book is an essential resource for researchers in a number of fields, including geology, geophysics, geoscience, volcanology, material science, glass science, petrology and mineralogy. - Brings together multidisciplinary research scattered across the scientific literature into one reference, with a focus on silicate melts and their application to natural systems - Emphasizes linking melt properties to melt structure - Includes a discussion of the pros and cons of the use of glass as a proxy for melt structure and properties - Written by highly regarded experts in the field who, among other honors, were the 2006 recipients of the prestigious G.W. Morey award of the American Ceramic Society

Download or read book Thermodynamics of Minerals and Melts written by R.C. Newton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today large numbers of geoscientists apply thermodynamic theory to solu tions of a variety of problems in earth and planetary sciences. For most problems in chemistry, the application of thermodynamics is direct and rewarding. Geoscientists, however, deal with complex inorganic and organic substances. The complexities in the nature of mineralogical substances arise due to their involved crystal structure and multicomponental character. As a result, thermochemical solutions of many geological-planetological problems should be attempted only with a clear understanding of the crystal-chemical and thermochemical character of each mineral. The subject of physical geochemistry deals with the elucidation and application of physico-chemical principles to geosciences. Thermodynamics of mineral phases and crystalline solutions form an integral part of it. Developments in mineralogic thermody namics in recent years have been very encouraging, but do not easily reach many geoscientists interested mainly in applications. This series is to provide geoscientists and planetary scientists with current information on the develop ments in thermodynamics of mineral systems, and also provide the active researcher in this rapidly developing field with a forum through which he can popularize the important conclusions of his work. In the first several volumes, we plan to publish original contributions (with an abundant supply of back ground material for the uninitiated reader) and thoughtful reviews from a number of researchers on mineralogic thermodynamics, on the application of thermochemistry to planetary phase equilibria (including meteorites), and on kinetics of geochemical reactions.

Download or read book NASA Glenn Coefficients for Calculating Thermodynamic Properties of Individual Species written by Bonnie J. McBride and published by . This book was released on 2002 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Chemistry of the Actinide and Transactinide Elements 3rd ed Volumes 1 5 written by L.R. Morss and published by Springer Science & Business Media. This book was released on 2007-12-31 with total page 4059 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemistry of the Actinide and Transactinide Elements is a contemporary and definitive compilation of chemical properties of all of the actinide elements, especially of the technologically important elements uranium and plutonium, as well as the transactinide elements. In addition to the comprehensive treatment of the chemical properties of each element, ion, and compound from atomic number 89 (actinium) through to 109 (meitnerium), this multi-volume work has specialized and definitive chapters on electronic theory, optical and laser fluorescence spectroscopy, X-ray absorption spectroscopy, organoactinide chemistry, thermodynamics, magnetic properties, the metals, coordination chemistry, separations, and trace analysis. Several chapters deal with environmental science, safe handling, and biological interactions of the actinide elements. The Editors invited teams of authors, who are active practitioners and recognized experts in their specialty, to write each chapter and have endeavoured to provide a balanced and insightful treatment of these fascinating elements at the frontier of the periodic table. Because the field has expanded with new spectroscopic techniques and environmental focus, the work encompasses five volumes, each of which groups chapters on related topics. All chapters represent the current state of research in the chemistry of these elements and related fields.

Download or read book Preliminary Report on the Thermodynamic Properties of Selected Light element and Some Related Compounds written by and published by . This book was released on 1961 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Characterization of High temperature Vapors written by John L. Margrave and published by . This book was released on 1967 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Techniques for Surface Engineering written by W. Gissler and published by Springer Science & Business Media. This book was released on 1992-10-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hardest requirements on a material are in general imposed at the surface: it has to be wear resistant for tools and bearings; corrosion resistant for turbine blades; antireflecting for solar cells; and it must combine several of these properties in other applications. `Surface engineering' is the general term that incorporates all the techniques by which a surface modification can be accomplished. These techniques include both the more traditional methods, such as nitriding, boriding and carburizing, and the newer ones, such as ion implantation, laser beam melting and, in particular, coating. This book comprises and compares in a unique way all these techniques of surface engineering. It is a compilation of lectures which were held by renowned scientists and engineers in the frame of the well known `EuroCourses' of the Joint Research Centre of the Commission of the European Communities. The book is principally addressed to material and surface scientists, physicists and chemists, engineers and technicians of industries and institutes where surface engineering problems arise.

Download or read book Supercritical Fluids written by E. Kiran and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids are neither gas nor liquid, but can be compressed gradually from low to high density and they are therefore interesting and important as tunable solvents and reaction media in the chemical process industry. By adjusting the density the properties of these fluids can be customised and manipulated for a given process - physical or chemical transformation. Separation and processing using supercritical solvents such as CO2 are currently on-line commercially in the food, essential oils and polymer industries. Many agencies and industries are considering the use of supercritical water for waste remediation. Supercritical fluid chromatography represents another, major analytical application. Significant advances have recently been made in materials processing, ranging from particle formation to the creation of porous materials. The chapters in this book provide tutorial accounts of topical areas centred around: (1) phase equilibria, thermodynamics and equations of state; (2) critical behaviour, crossover effects; (3) transport and interfacial properties; (4) molecular modelling, computer simulation; (5) reactions, spectroscopy; (6) phase separation kinetics; (7) extractions; (8) applications to polymers, pharmaceuticals, natural materials and chromatography; (9) process scale-up.

Download or read book Applications of Process Engineering Principles in Materials Processing Energy and Environmental Technologies written by Shijie Wang and published by Springer. This book was released on 2017-02-07 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection offers new research findings, innovations, and industrial technological developments in extractive metallurgy, energy and environment, and materials processing. Technical topics included in the book are thermodynamics and kinetics of metallurgical reactions, electrochemical processing of materials, plasma processing of materials, composite materials, ionic liquids, thermal energy storage, energy efficient and environmental cleaner technologies and process modeling. These topics are of interest not only to traditional base ferrous and non-ferrous metal industrial processes but also to new and upcoming technologies, and they play important roles in industrial growth and economy worldwide.

Download or read book Handbook of Laboratory Distillation written by E. Krell and published by Elsevier. This book was released on 1982-02-01 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Laboratory Distillation

Download or read book Adsorption Science and Technology written by A.E. Rodrigues and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Vimeiro, Portugal, July 17-29, 1988

Download or read book Geochemistry written by William M. White and published by John Wiley & Sons. This book was released on 2013-01-22 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the field of geochemistry. The book first lays out the ‘geochemical toolbox’: the basic principles and techniques of modern geochemistry, beginning with a review of thermodynamics and kinetics as they apply to the Earth and its environs. These basic concepts are then applied to understanding processes in aqueous systems and the behavior of trace elements in magmatic systems. Subsequent chapters introduce radiogenic and stable isotope geochemistry and illustrate their application to such diverse topics as determining geologic time, ancient climates, and the diets of prehistoric peoples. The focus then broadens to the formation of the solar system, the Earth, and the elements themselves. Then the composition of the Earth itself becomes the topic, examining the composition of the core, the mantle, and the crust and exploring how this structure originated. A final chapter covers organic chemistry, including the origin of fossil fuels and the carbon cycle’s role in controlling Earth’s climate, both in the geologic past and the rapidly changing present. Geochemistry is essential reading for all earth science students, as well as for researchers and applied scientists who require an introduction to the essential theory of geochemistry, and a survey of its applications in the earth and environmental sciences. Additional resources can be found at: www.wiley.com/go/white/geochemistry

Download or read book Martin s Physical Pharmacy and Pharmaceutical Sciences written by Alfred N. Martin and published by . This book was released on 2011 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Martin's Physical Pharmacy and Pharmaceutical Sciences is considered the most comprehensive text available on the application of the physical, chemical and biological principles in the pharmaceutical sciences. It helps students, teachers, researchers, and industrial pharmaceutical scientists use elements of biology, physics, and chemistry in their work and study. Since the first edition was published in 1960, the text has been and continues to be a required text for the core courses of Pharmaceutics, Drug Delivery, and Physical Pharmacy. The Sixth Edition features expanded content on drug delivery, solid oral dosage forms, pharmaceutical polymers and pharmaceutical biotechnology, and updated sections to cover advances in nanotechnology.

Download or read book Silicate Melts written by Sharon Webb and published by Springer. This book was released on 1997-07-17 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the experimental determination of the physical properties of silicate melts and magmas close to glass transition. Abundant new data are presented. The same type of measurement is performed on a range of melts to test the effect of composition on physical properties; and a range of different techniques are used to determine the same physical properties to illustrate the relationships between the relaxation of the melt structure and the relaxation of its physical properties. This book is of interest to experimental researchers in the discussion of data obtained from both a materials science and a geoscientific point of view.

Download or read book Adsorption Analysis Equilibria And Kinetics With Cd Containing Computer Matlab Programs written by Duong D Do and published by World Scientific. This book was released on 1998-09-22 with total page 915 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers topics of equilibria and kinetics of adsorption in porous media. Fundamental equilibria and kinetics are dealt with for homogeneous as well as heterogeneous particles. Five chapters of the book deal with equilibria and eight chapters deal with kinetics. Single component as well as multicomponent systems are discussed. In kinetics analysis, we deal with the various mass transport processes and their interactions inside a porous particle. Conventional approaches as well as the new approach using Maxwell-Stefan equations are presented. Various methods to measure diffusivity, such as the Differential Adsorption Bed (DAB), the time lag, the diffusion cell, chromatography, and the batch adsorber methods are also covered by the book. It can be used by lecturers and engineers who wish to carry out research in adsorption. A number of programming codes written in MatLab language are included so that readers can use them directly to better understand the behavior of single and multicomponent adsorption systems.