Download or read book Phase Equilibria Phase Diagrams and Phase Transformations written by Mats Hillert and published by Cambridge University Press. This book was released on 2007-11-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational tools allow material scientists to model and analyze increasingly complicated systems to appreciate material behavior. Accurate use and interpretation however, requires a strong understanding of the thermodynamic principles that underpin phase equilibrium, transformation and state. This fully revised and updated edition covers the fundamentals of thermodynamics, with a view to modern computer applications. The theoretical basis of chemical equilibria and chemical changes is covered with an emphasis on the properties of phase diagrams. Starting with the basic principles, discussion moves to systems involving multiple phases. New chapters cover irreversible thermodynamics, extremum principles, and the thermodynamics of surfaces and interfaces. Theoretical descriptions of equilibrium conditions, the state of systems at equilibrium and the changes as equilibrium is reached, are all demonstrated graphically. With illustrative examples - many computer calculated - and worked examples, this textbook is an valuable resource for advanced undergraduates and graduate students in materials science and engineering.
Download or read book The Physics of Phase Transitions written by Pierre Papon and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Physics of Phase Transitions occupies an important place at the crossroads of several fields central to materials sciences. This second edition incorporates new developments in the states of matter physics, in particular in the domain of nanomaterials and atomic Bose-Einstein condensates where progress is accelerating. New information and application examples are included. This work deals with all classes of phase transitions in fluids and solids, containing chapters on evaporation, melting, solidification, magnetic transitions, critical phenomena, superconductivity, and more. End-of-chapter problems and complete answers are included.
Download or read book Phase Transitions in Materials written by Brent Fultz and published by Cambridge University Press. This book was released on 2014-08-14 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear, concise and rigorous textbook covering phase transitions in the context of advances in electronic structure and statistical mechanics.
Download or read book Phase Transformations in Materials written by G. Kostorz and published by Wiley-VCH. This book was released on 2001-10-25 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).
Download or read book Kinetics of Phase Transitions written by Sanjay Puri and published by CRC Press. This book was released on 2009-03-24 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive introduction with the necessary background material to make it accessible for a wide scientific audience, Kinetics of Phase Transitions discusses developments in domain-growth kinetics. This book combines pedagogical chapters from leading experts in this area and focuses on incorporating various experimentally releva
Download or read book Basics of Thermodynamics and Phase Transitions in Complex Intermetallics written by Esther Belin-Ferr and published by World Scientific. This book was released on 2008 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metal alloys (CMAs) comprise a huge group of largely unknown alloys and compounds, where many phases are formed with crystal structures based on giant unit cells containing atom clusters, ranging from tens of to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually exclusive in conventional materials, such as metallic electric conductivity combined with low thermal conductivity, good light absorption with high-temperature stability, high metallic hardness with reduced wetting by liquids, etc.This book is the first of a series of books issued yearly as a deliverable to the European Community of the School established within the European Network of Excellence CMA. Written by reputed experts in the fields of metal physics, surface physics, surface chemistry, metallurgy, and process engineering, this book brings together expertise found inside as well as outside the network to provide a comprehensive overview of the current state of knowledge in CMAs.
Download or read book Phase Transformations in Metals and Alloys Third Edition Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 1992-09-10 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. - Discusses the fundamental principles of thermodynamics, diffusion and kinetics - Considers various transformations, including ferrite formation, proeutectoid ferrite and cementite transformations - Considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations
Download or read book Phase Transformation in Metals written by Nestor Perez and published by Springer Nature. This book was released on 2020-09-25 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains the physics of phase transformation and associated constraints from a metallurgical or materials science point of view, based on many topics including crystallography, mass transport by diffusion, thermodynamics, heat transfer and related temperature gradients, thermal deformation, and even fracture mechanics. The work presented emphasizes solidification and related analytical models based on heat transfer. This corresponds with the most fundamental physical event of continuous evolution of latent heat of fusion for directional or non-directional liquid-to-solid phase transformation at a specific interface with a certain geometrical shape, such as planar or curved front. Dr. Perez introduces mathematical and engineering approximation schemes for describing the phase transformation, mainly during solidification of pure metals and alloys. Giving clear definitions and explanations of theoretical concepts and full detail of derivation of formulae, this interdisciplinary volume is ideal for graduate and upper-level undergraduate students in applied science, and professionals in the metal making and surface reconstruction industries.
Download or read book Microcanonical Thermodynamics written by Dieter H. E. Gross and published by World Scientific. This book was released on 2001 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boltzmann's formula S = In(W(E) defines the microcanonical ensemble. The usual textbooks on statistical mechanics start with the microensemble but rather quickly switch to the canonical ensemble introduced by Gibbs. This has the main advantage of easier analytical calculations, but there is a price to pay -- for example, phase transitions can only be defined in the thermodynamic limit of infinite system size. The question how phase transitions show up from systems with, say, 100 particles with an increasing number towards the bulk can only be answered when one finds a way to define and classify phase transitions in small systems. This is all possible within Boltzmann's original definition of the microcanonical ensemble. Starting from Boltzmann's formula, the book formulates the microcanonical thermodynamics entirely within the frame of mechanics. This way the thermodynamic limit is avoided and the formalism applies to small as well to other nonextensive systems like gravitational ones. Phasetransitions of first order, continuous transitions, critical lines and multicritical points can be unambiguously defined by the curvature of the entropy S(E, N). Special attention is given to the fragmentation of nuclei and atomic clusters as a peculiar phase transition of small systems controlled, among others, by angular momentum. The dependence of the liquid-gas transition of small atomic clusters under prescribed pressure is treated. Thus the analogue to the bulk transition can be studied. New insights into the many facets of the many-body physics of the critical point are presented. The book also describes the microcanonical statistics of the collapse of a self-gravitating system under large angular momentum.
Download or read book The Thermodynamics of Phase and Reaction Equilibria written by Ismail Tosun and published by Newnes. This book was released on 2012-10-17 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides you with a sound foundation for understanding abstract concepts (eg physical properties such as fugacity, etc or chemical processes, ie distillation, etc) of phase and reaction equilibria and shows you how to apply these concepts to solve practical problems using numerous and clear examples.
Download or read book Phase Transformations and Heat Treatments of Steels written by Bankim Chandra Ray and published by CRC Press. This book was released on 2020-06-01 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The perpetual flow of understanding between phase transformation that controls grain/microstructures and heat treatment which decides the size of grains/microstructures of steels is not well articulated in the perspective of undergraduate students. In Phase Transformations and Heat Treatments of Steels, theories of phase transformation have been used to obtain a desirable phase or combination of phases by performing appropriate heat treatment operations, leading to unification of both the concepts. Further, it includes special and critical heat treatment practices, case studies, local and in-service heat treatments, curative and preventive measures of heat treatment defects for several common and high-performance applications. Features: Presents fundamentals of phase transformation in steels Analyzes basics of phase transformation due to heat treatment of steel under various environmental conditions Explains application of heat treatment for different structural components Discusses heat treatment defects and detection Emphasizes heat treatment of special steels and in-situ heat treatment practices
Download or read book Introduction to the Thermodynamics of Materials Fifth Edition written by David R. Gaskell and published by CRC Press. This book was released on 2003-02-07 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The CD contains data and descriptive material for making detailed thermodynamic calculations involving materials processing"--Preface.
Download or read book Phase Transformations in Metals and Alloys written by David A. Porter and published by . This book was released on 1981 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermodynamics and Kinetics of Phase Transformations Volume 398 written by James S. Im and published by . This book was released on 1996-09-10 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emphasis of this book is on the quantitative analysis of transformation kinetics, integrated with thermodynamics. Solidification is a success story for quantitative kinetics analysis. The work reported concentrates on phase selection under extreme processing - large undercooling or ultrarapid quenching - of the liquid. Theoretical treatments are concerned mainly with the analysis of morphological instabilities during directional solidification at more conventional rates. The coverage of particle-beam effects is distinguished by the materials studied: alkali halides, minerals, semiconductors and metals. The thermodynamics of interfaces are a particular focus, especially in connection with the solid-state formation of amorphous phases. A highlight of the book is the coverage of the Johnson-Mehl-Avrami-Kolmogorov analysis of overall transformation kinetics. This venerable treatment is revisited and new insights and limitations are explored. Topics include: transformations in undercooled liquids; directional solidification; particle beam-induced transformations; interfaces - thermodynamics and reactions; amorphous materials - structure and transformations; solid-state transformations and ordering and phase separation.
Download or read book Phase Diagrams written by Flake C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-written text is for non-metallurgists and anyone seeking a quick refresher on an essential tool of modern metallurgy. The basic principles, construction, interpretation, and use of alloy phase diagrams are clearly described with ample illustrations for all important liquid and solid reactions. Gas-metal reactions, important in metals processing and in-service corrosion, also are discussed. Get the basics on how phase diagrams help predict and interpret the changes in the structure of alloys.
Download or read book Phase Transformations in Multicomponent Melts written by Dieter M. Herlach and published by John Wiley & Sons. This book was released on 2009-06-10 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the concerted efforts of the multicomponent materials community in one decisive reference work, this handbook covers all the important aspects from fundamentals to applications: thermodynamics, microscopic processes, solidification, simulation and modeling. As such, it provides a vital understanding of melt and solidification processes, treating all simulation techniques for continuous and discrete systems, such as molecular dynamics, Monte Carlo, and finite elements calculations.
