Download or read book Thermodynamics and Kinetics of Ceramic metal Interfacial Interactions written by Raymundo Arróyave and published by . This book was released on 2004 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Cont.) By using simple one-dimensional interdiffusion simulations, it was demonstrated that the base metal in ceramic/metal joints plays an essential role in determine the thermochemical interactions at the ceramic/metal interface during ceramic/metal joining operations. In general it was found that, using all these techniques, it was possible to explain diffusion paths and reaction sequences observed in a great number of zirconia/active-metal systems, both in the solid and in the liquid states. In many cases, the morphology of the reaction layers formed at ceramic/metal interfaces determine their final properties. To address this problem, empirical thermodynamic models of the likely reaction products at zirconia/metal interfaces were coupled to kinetic models using the diffuse-interface formalism to successfully describe the formation and evolution of complex ceramic/metal interfacial structures.
Download or read book Surfaces and Interfaces in Ceramic and Ceramic Metal Systems written by Joseph Pask and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 17th University Conference on Ceramics, which also was the 7th LBL/MMRD International Materials Symposium, was held on the campus of the University of California at Berkeley from July 28 to August 1, 1980. It was devoted to the subject of surfaces and interfaces in ceramic and ceramic-metal systems. The program was timely and of great interest, as indicated by the large number of contributed papers, which included contributions from ten foreign countries. These proceedings are divided into the following categories dealing with the chemistry and physics of interfaces: calculations of interface/surface states, characterization of surfaces and inter faces, thermodynamics of interfaces, influence of surface and inter faces on selected ceramic processes, grain boundary structures, effects of grain boundaries on deformation and fracture, interfacial phenomena, formation of interfaces, development of adhesion, and reactions at interfaces. A number of papers deal specifically with the Si-Si02 interface, which probably has received more attention than any other because of its importance in the electronics industry. This coverage fulfills the principal objective of the symposium which was to explore and assess the current fundamental understand ing of interfaces and surfaces. A parallel objective of the symposium was fulfilled by a group of papers dealing with the correlation of interfacial characteris tics with mechanical behavior. This group includes papers dealing with the adherence of dissimilar materials at interfaces.
Download or read book Interfacial Science in Ceramic Joining written by Alida Bellosi and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique combination of the basic science and fundamental aspects of joints and interfaces with the engineering aspects of the subject. Contributors include researchers drawn from several Eastern European countries. Topics addressed include processing, interfacial reactions, graded joints, residual stress measurement and analysis, and failure and deformation. Audience: Academic and industrial researchers and ceramic manufacturers interested in understanding the current state of the art in joining.
Download or read book Surfaces and Interfaces in Ceramic and Ceramic Metal Systems written by Joseph Pask and published by Springer. This book was released on 2012-07-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 17th University Conference on Ceramics, which also was the 7th LBL/MMRD International Materials Symposium, was held on the campus of the University of California at Berkeley from July 28 to August 1, 1980. It was devoted to the subject of surfaces and interfaces in ceramic and ceramic-metal systems. The program was timely and of great interest, as indicated by the large number of contributed papers, which included contributions from ten foreign countries. These proceedings are divided into the following categories dealing with the chemistry and physics of interfaces: calculations of interface/surface states, characterization of surfaces and inter faces, thermodynamics of interfaces, influence of surface and inter faces on selected ceramic processes, grain boundary structures, effects of grain boundaries on deformation and fracture, interfacial phenomena, formation of interfaces, development of adhesion, and reactions at interfaces. A number of papers deal specifically with the Si-Si02 interface, which probably has received more attention than any other because of its importance in the electronics industry. This coverage fulfills the principal objective of the symposium which was to explore and assess the current fundamental understand ing of interfaces and surfaces. A parallel objective of the symposium was fulfilled by a group of papers dealing with the correlation of interfacial characteris tics with mechanical behavior. This group includes papers dealing with the adherence of dissimilar materials at interfaces.
Download or read book Interfacial Compatibility in Microelectronics written by Tomi Laurila and published by Springer Science & Business Media. This book was released on 2012-01-10 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces between dissimilar materials are met everywhere in microelectronics and microsystems. In order to ensure faultless operation of these highly sophisticated structures, it is mandatory to have fundamental understanding of materials and their interactions in the system. In this difficult task, the “traditional” method of trial and error is not feasible anymore; it takes too much time and repeated efforts. In Interfacial Compatibility in Microelectronics, an alternative approach is introduced. In this revised method four fundamental disciplines are combined: i) thermodynamics of materials ii) reaction kinetics iii) theory of microstructures and iv) stress and strain analysis. The advantages of the method are illustrated in Interfacial Compatibility in Microelectronics which includes: solutions to several common reliability issues in microsystem technology, methods to understand and predict failure mechanisms at interfaces between dissimilar materials and an approach to DFR based on deep understanding in materials science, rather than on the use of mechanistic tools, such as FMEA. Interfacial Compatibility in Microelectronics provides a clear and methodical resource for graduates and postgraduates alike.
Download or read book Metal Ceramic Interfaces written by M. Rühle and published by Elsevier. This book was released on 2013-10-22 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: As engineering materials and structures often contain a metal or metallic alloy bonded to a ceramic, the resultant interface must be able to sustain mechanical forces without failure. They also play an important role in oxidation or reduction of materials. The workshop on 'Bonding, Structure and Mechanical Properties of Metal/Ceramic Interfaces' was held in January 1989 within the Acta/Scripta Metallurgica conference series. It drew together an international collection of 70 scientists who discussed a wide range of issues related to metal-ceramic interfaces. The sessions were divided into 7 categories: structure and bonding, chemistry at interfaces, formation of interfaces, structure of interfaces, thermodynamics/atomistics of interface fracture, mechanics of interface cracks, and fracture resistance of bimaterial interfaces. Within these headings attention was paid to grain boundaries, the influence of chemical processes on the behaviour of interfaces, diffusion bonding, characterization of fracture, and crack propagation by fatigue and by stress corrosion. The book presents a useful reference source for materials scientists, physicists, chemists, and mechanical engineers who are concerned with the roles and properties of interfaces.
Download or read book Study of Metal ceramic Interactions at Elevated Temperatures written by F. H. Norton and published by . This book was released on 1952 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surfaces and Interfaces of Ceramic Materials written by L.C. Dufour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the NATO Advanced Study Institute on Surfaces and Interfaces of Ceramic Materials, held on the Oleron island, France, in September 1988. This Institute was organized in nine months after receiving the agreement of the NATO Scientific Affairs Division. Despite this very short time, most of the lecturers contacted have accepted our invitation to prepare a specific talk. The meeting was held at "La Vieille Perrotine" on the Oleron island. This holiday village of the French CNRS is located near the Ocean in a natural area which contributed to create a very pleasant atmosphere favourable to develop interaction between the 91 participants in this Institute. First of all, the Institute was aimed at diffusing the foremost results on the characterization of and the role played by surfaces, grain boundaries and interfaces in preparation and overall properties of ceramic materials, mainly of oxide ceramics. Through its interdisciplinary character, the Institute was also aimed at developing interaction between scientists and engineers interested in basic and practical aspects of processing and use of ceramics.
Download or read book Study of Metal ceramic Interactions at Elevated Temperatures written by and published by . This book was released on 1955-07 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designing Interfaces for Technological Applications written by S. D. Peteves and published by Elsevier Science & Technology. This book was released on 1989 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kinetics in Materials Science and Engineering written by Dennis W. Readey and published by CRC Press. This book was released on 2017-01-27 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A pedagogical gem.... Professor Readey replaces ‘black-box’ explanations with detailed, insightful derivations. A wealth of practical application examples and exercise problems complement the exhaustive coverage of kinetics for all material classes." –Prof. Rainer Hebert, University of Connecticut "Prof. Readey gives a grand tour of the kinetics of materials suitable for experimentalists and modellers.... In an easy-to-read and entertaining style, this book leads the reader to fundamental, model-based understanding of kinetic processes critical to development, fabrication and application of commercially-important soft (polymers, biomaterials), hard (ceramics, metals) and composite materials. It is a must-have for anyone who really wants to understand how to make materials and how they will behave in service." --Prof. Bill Lee, Imperial College London, Fellow of the Royal Academy of Engineering "A much needed text filing the gap between an introductory course in materials science and advanced materials-specific kinetics courses. Ideal for the undergraduate interested in an in-depth study of kinetics in materials." –Prof. Mark E. Eberhart, Colorado School of Mines This book provides an in-depth introduction to the most important kinetic concepts in materials science, engineering, and processing. All types of materials are addressed, including metals, ceramics, polymers, electronic materials, biomaterials, and composites. The expert author with decades of teaching and practical experience gives a lively and accessible overview, explaining the principles that determine how long it takes to change material properties and make new and better materials. The chapters cover a broad range of topics extending from the heat treatment of steels, the processing of silicon integrated microchips, and the production of cement, to the movement of drugs through the human body. The author explicitly avoids "black box" equations, providing derivations with clear explanations.
Download or read book Study of Metal ceramic Interactions at Elevated Temperatures written by Frederick Harwood Norton and published by . This book was released on 1953 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Microstructures written by Antoni P. Tomsia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, titled Proceedings of the International Materials Symposium on Ce ramic Microstructures: Control at the Atomic Level summarizes the progress that has been achieved during the past decade in understanding and controlling microstructures in ceram ics. A particular emphasis of the symposium, and therefore of this volume, is advances in the characterization, understanding, and control of micro structures at the atomic or near-atomic level. This symposium is the fourth in a series of meetings, held every ten years, devoted to ceramic microstructures. The inaugural meeting took place in 1966, and focussed on the analysis, significance, and production of microstructure; the symposium emphasized the need for, and importance of characterization in achieving a more complete understanding of the physical and chemical characteristics of ceramics. A consensus emerged at that meeting on the critical importance of characterization in achieving a more complete understanding of ceramic properties. That point of view became widely accepted in the ensuing decade. The second meeting took place in 1976 at a time of world-wide energy shortages and thus emphasized energy-related applications of ceramics, and more specifically, microstructure-property relationships of those materials. The third meeting, held in 1986, was devoted to the role that interfaces played both during processing, and in influencing the ultimate properties of single and polyphase ceramics, and ceramic-metal systems.
Download or read book Study of Metal ceramic Interactions at Elevated Temperatures written by F. H. Norton and published by . This book was released on 1951 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 1628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal and Ceramic Matrix Composites written by Brian Cantor and published by CRC Press. This book was released on 2003-11-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading experts in their respective fields, Metal and Ceramic Matrix Composites provides a comprehensive overview of topics on specific materials and trends. It is a subject regularly included as a final year option in materials science courses and is also of much industrial and academic interest. The book begins wit
