Download or read book Thermodynamics and Heat Powered Cycles written by Chih Wu and published by Nova Publishers. This book was released on 2007 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the rapid advances in computer technology, intelligent computer software and multimedia have become essential parts of engineering education. Software integration with various media such as graphics, sound, video and animation is providing efficient tools for teaching and learning. A modern textbook should contain both the basic theory and principles, along with an updated pedagogy. Often traditional engineering thermodynamics courses are devoted only to analysis, with the expectation that students will be introduced later to relevant design considerations and concepts. Cycle analysis is logically and traditionally the focus of applied thermodynamics. Type and quantity are constrained, however, by the computational efforts required. The ability for students to approach realistic complexity is limited. Even analyses based upon grossly simplified cycle models can be computationally taxing, with limited educational benefits. Computerised look-up tables reduce computational labour somewhat, but modelling cycles with many interactive loops can lie well outside the limits of student and faculty time budgets. The need for more design content in thermodynamics books is well documented by industry and educational oversight bodies such as ABET (Accreditation Board for Engineering and Technology). Today, thermodynamic systems and cycles are fertile ground for engineering design. For example, niches exist for innovative power generation systems due to deregulation, co-generation, unstable fuel costs and concern for global warming. Professor Kenneth Forbus of the computer science and education department at Northwestern University has developed ideal intelligent computer software for thermodynamic students called CyclePad. CyclePad is a cognitive engineering software. It creates a virtual laboratory where students can efficiently learn the concepts of thermodynamics, and allows systems to be analyzed and designed in a simulated, interactive computer aided design environment. The software guides students through a design process and is able to provide explanations for results and to coach students in improving designs. Like a professor or senior engineer, CyclePad knows the laws of thermodynamics and how to apply them. If the user makes an error in design, the program is able to remind the user of essential principles or design steps that may have been overlooked. If more help is needed, the program can provide a documented, case study that recounts how engineers have resolved similar problems in real life situations. CyclePad eliminates the tedium of learning to apply thermodynamics, and relates what the user sees on the computer screen to the design of actual systems. This integrated, engineering textbook is the result of fourteen semesters of CyclePad usage and evaluation of a course designed to exploit the power of the software, and to chart a path that truly integrates the computer with education. The primary aim is to give students a thorough grounding in both the theory and practice of thermodynamics. The coverage is compact without sacrificing necessary theoretical rigor. Emphasis throughout is on the applications of the theory to actual processes and power cycles. This book will help educators in their effort to enhance education through the effective use of intelligent computer software and computer assisted course work.
Download or read book Thermodynamic Cycles written by Chih Wu and published by CRC Press. This book was released on 2003-10-21 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference illustrates the efficacy of CyclePad software for enhanced simulation of thermodynamic devices and cycles. It improves thermodynamic studies by reducing calculation time, ensuring design accuracy, and allowing for case-specific analyses. Offering a wide-range of pedagogical aids, chapter summaries, review problems, and worked example
Download or read book An Introduction to Thermodynamic Cycle Simulations for Internal Combustion Engines written by Jerald A. Caton and published by John Wiley & Sons. This book was released on 2015-12-14 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to basic thermodynamic engine cycle simulations, and provides a substantial set of results. Key features includes comprehensive and detailed documentation of the mathematical foundations and solutions required for thermodynamic engine cycle simulations. The book includes a thorough presentation of results based on the second law of thermodynamics as well as results for advanced, high efficiency engines. Case studies that illustrate the use of engine cycle simulations are also provided.
Download or read book Thermodynamic Cycles written by D James Benton and published by . This book was released on 2019-05-30 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient design, operation, and maintenance of power and process systems require accurate and effective thermodynamic cycle modeling tools. Many such tools exist; however, the logic and programming of these tools vary considerably, making them more or less practical for differing applications. This book is a compilation of what to do and what to avoid, including the details of how to best accomplish the desired end. All of the data and source code are available free online.
Download or read book Closed Power Cycles written by Costante Mario Invernizzi and published by Springer Science & Business Media. This book was released on 2013-06-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the growing attention to the exploitation of renewable energies and heat recovery from industrial processes, the traditional steam and gas cycles are showing themselves often inadequate. The inadequacy is due to the great assortment of the required sizes power and of the large kind of heat sources. Closed Power Cycles: Thermodynamic Fundamentals and Applications offers an organized discussion about the strong interaction between working fluids, the thermodynamic behavior of the cycle using them and the technological design aspects of the machines. A precise treatment of thermal engines operating in accordance with closed cycles is provided to develop ideas and discussions strictly founded on the basic thermodynamic facts that control the closed cycles operation and design. Closed Power Cycles: Thermodynamic Fundamentals and Applications also contains numerous examples which have been carried out with the help of the Aspen Plus®R program. Including chapters on binary cycles, the organic Rankine cycle and real closed gas cycles, Closed Power Cycles: Thermodynamic Fundamentals and Applications acts a solid introduction and reference for post-graduate students and researchers working in applied thermodynamics and energy conversion with thermodynamic engines.
Download or read book Advanced Thermodynamics for Engineers written by D. Winterbone and published by Butterworth-Heinemann. This book was released on 1996-11-01 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the basic theories of thermodynamics are adequately covered by a number of existing texts, there is little literature that addresses more advanced topics. In this comprehensive work the author redresses this balance, drawing on his twenty-five years of experience of teaching thermodynamics at undergraduate and postgraduate level, to produce a definitive text to cover thoroughly, advanced syllabuses. The book introduces the basic concepts which apply over the whole range of new technologies, considering: a new approach to cycles, enabling their irreversibility to be taken into account; a detailed study of combustion to show how the chemical energy in a fuel is converted into thermal energy and emissions; an analysis of fuel cells to give an understanding of the direct conversion of chemical energy to electrical power; a detailed study of property relationships to enable more sophisticated analyses to be made of both high and low temperature plant and irreversible thermodynamics, whose principles might hold a key to new ways of efficiently covering energy to power (e.g. solar energy, fuel cells). Worked examples are included in most of the chapters, followed by exercises with solutions. By developing thermodynamics from an explicitly equilibrium perspective, showing how all systems attempt to reach a state of equilibrium, and the effects of these systems when they cannot, the result is an unparalleled insight into the more advanced considerations when converting any form of energy into power, that will prove invaluable to students and professional engineers of all disciplines.
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book 28th International Symposium on Shock Waves written by Konstantinos Kontis and published by Springer Science & Business Media. This book was released on 2012-03-22 with total page 1122 pages. Available in PDF, EPUB and Kindle. Book excerpt: The University of Manchester hosted the 28th International Symposium on Shock Waves between 17 and 22 July 2011. The International Symposium on Shock Waves first took place in 1957 in Boston and has since become an internationally acclaimed series of meetings for the wider Shock Wave Community. The ISSW28 focused on the following areas: Blast Waves, Chemically Reacting Flows, Dense Gases and Rarefied Flows, Detonation and Combustion, Diagnostics, Facilities, Flow Visualisation, Hypersonic Flow, Ignition, Impact and Compaction, Multiphase Flow, Nozzle Flow, Numerical Methods, Propulsion, Richtmyer-Meshkov, Shockwave Boundary Layer Interaction, Shock Propagation and Reflection, Shock Vortex Interaction, Shockwave Phenomena and Applications, as well as Medical and Biological Applications. The two Volumes contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 28 and individuals interested in these fields.
Download or read book Physics of Cryogenics written by Bahman Zohuri and published by Elsevier. This book was released on 2017-11-17 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of Cryogenics: An Ultralow Temperature Phenomenon discusses the significant number of advances that have been made during the last few years in a variety of cryocoolers, such as Brayton, Joule-Thomson, Stirling, pulse tube, Gifford-McMahon and magnetic refrigerators. The book reviews various approaches taken to improve reliability, a major driving force for new research areas. The advantages and disadvantages of different cycles are compared, and the latest improvements in each of these cryocoolers is discussed. The book starts with the thermodynamic fundamentals, followed by the definition of cryogenic and the associated science behind low temperature phenomena and properties. This book is an ideal resource for scientists, engineers and graduate and senior undergraduate students who need a better understanding of the science of cryogenics and related thermodynamics. - Defines the fundamentals of thermodynamics that are associated with cryogenic processes - Provides an overview of the history of the development of cryogenic technology - Includes new, low temperature tables written by the author - Deals with the application of cryogenics to preserve objects at very low temperature - Explains how cryogenic phenomena work for human cell and human body preservations and new medical approaches
Download or read book Technical Thermodynamics for Engineers written by Achim Schmidt and published by Springer Nature. This book was released on 2022-05-05 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the classical areas of technical thermodynamics: The first part deals with the basic equations for energy conversion and idealized fluids. The second part deals with real fluids, which can be subject to a phase change, for example. Furthermore, thermodynamic mixtures of fluids are considered, e.g., humid air and gas mixtures. In the last part of the book, combustion processes and chemical reactions are presented and thermodynamically balanced. In each chapter, there are examples and exercises to deepen the theoretical knowledge. Compared to the first edition, the topic of thermodynamic state diagrams has been greatly revised. State diagrams of relevant refrigerants have been added as well as a formulary. The section on chemically reacting systems has been expanded and thoroughly revised. In the basic chapters, tasks and examples have been added to consolidate the understanding of the subject. The book is aimed at students of mechanical engineering and professional engineers.
Download or read book Finite Time Thermodynamics of Power and Refrigeration Cycles written by Shubhash C. Kaushik and published by Springer. This book was released on 2017-11-23 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the concept and applications of Finite Time Thermodynamics to various thermal energy conversion systems including heat engines, heat pumps, and refrigeration and air-conditioning systems. The book is the first of its kind, presenting detailed analytical formulations for the design and optimisation of various power producing and cooling cycles including but not limited to: • Vapour power cycles • Gas power cycles • Vapour compression cycles • Vapour absorption cycles • Rankine cycle coupled refrigeration systems Further, the book addresses the thermoeconomic analysis for the optimisation of thermal cycles, an important field of study in the present age and which is characterised by multi-objective optimization regarding energy, ecology, the environment and economics. Lastly, the book provides the readers with key techniques associated with Finite Time Thermodynamics, allowing them to understand the relevance of irreversibilities associated with real processes and the scientific reasons for deviations from ideal performance. The book is aimed at a broad readership, and offers a valuable reference book for graduate students, scholars and professionals working in the areas of thermal science and engineering.
Download or read book Fundamentals of Engineering Thermodynamics written by Michael J. Moran and published by John Wiley & Sons. This book was released on 2010-12-07 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: This leading text in the field maintains its engaging, readable style while presenting a broader range of applications that motivate engineers to learn the core thermodynamics concepts. Two new coauthors help update the material and integrate engaging, new problems. Throughout the chapters, they focus on the relevance of thermodynamics to modern engineering problems. Many relevant engineering based situations are also presented to help engineers model and solve these problems.
Download or read book Engineering Thermodynamics written by M. Kassim and published by Mercury Learning and Information. This book was released on 2022-03-15 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to cover the fundamental concepts of thermodynamics used in engineering, the book introduces topics such as the laws of thermodynamics, exergy analysis, thermodynamic cycles, measurement theory, and applications. Using step by step examples and numerous illustrations, the book is designed with a self-teaching methodology, including a variety of exercises with corresponding answers to enhance mastery of the content. The book provides an engineer with a basic understanding or review of thermodynamic principles. Features: Designed to cover the fundamental concepts of thermodynamics used in engineering Introduces topics such as the laws of thermodynamics, exergy analysis, thermodynamic cycles, measurement theory, and applications Includes a variety of exercises such as conceptual questions for review, and numerical exercises (with answers) to enhance mastery of the content
Download or read book Thermal to Mechanical Energy Conversion Engines and Requirements Volume II written by Oleg N Favorsky and published by EOLSS Publications. This book was released on 2009-11-20 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal to Mechanical Energy Conversion: Engines and Requirements is a component of Encyclopedia of Energy Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Thermal to Mechanical Energy Conversion: Engines and Requirements with contributions from distinguished experts in the field discusses energy. These three volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Applied Thermodynamics written by Onkar Singh and published by New Age International. This book was released on 2003 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Textbook of Thermal Engineering written by RS Khurmi | JK Gupta and published by S. Chand Publishing. This book was released on 2008 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two new chapters on eneral Themodynamic Relations and Variable Specific Heat have been Added.The mistake which had crept in have been elinimated.we wish to express our sincere thanks to numerous professors and students,both at home and abroad,for sending their valuable suggestions and also for recommending the book to their students and friends.
Download or read book Intelligent Computer Based Engineering Thermodynamics and Cycle Analysis written by Chih Wu and published by Nova Publishers. This book was released on 2002 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book and the accompanying computer software are intended to enhance and streamline the study of the field of thermodynamics. The package is design and problem-solving oriented. Released from the drain of repetitive and iterative hand calculation, students can be led to a far wider and deeper study than has been possible previously.
