Download or read book Thermal Stability Relationships Between Pmr 15 Resin and Its Composites written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-20 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study was conducted to investigate the relationship between the thermo-oxidative stability of PMR-15 matrix resin and the stability of graphite-fiber-reinforced composites that contain this resin as the matrix material. Three areas were investigated. The first was the effect of fiber/matrix interfacial bond strength on the isothermal aging weight loss of composites. By using type-A graphite fibers produced by Hercules, it was possible to study composites reinforced with fibers that were processed to receive different surface treatments. One of the fibers was untreated, a second fiber was treated by oxidation to enhance fiber/matrix bonding, and the third type of fiber was coated with an epoxy sizing. These treatments produced three significantly different interfacial bond strengths. The epoxy sizing on the third fiber was quickly oxidized from the bare fiber surfaces at 288, 316, and 343 C. The weight loss due to the removal of the sizing was constant at 1.5 percent. This initial weight loss was not observed in thermo-oxidative stability studies of composites. The PMR-15 matrix satisfactorily protected the reinforcemnt at all three temperatures. Bowles, Kenneth J. and Jayne, Douglas and Leonhardt, Todd A. and Bors, Dennis Glenn Research Center RTOP 510-01-50...

Download or read book Thermal Stability Relationships Between PMR 15 Resin and Its Composites written by and published by . This book was released on 1993 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature and Environmental Effects on Polymeric Composites written by Thomas S. Gates and published by ASTM International. This book was released on 1997 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Long Term Durability of Polymeric Matrix Composites written by Kishore V. Pochiraju and published by Springer Science & Business Media. This book was released on 2011-09-25 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long-Term Durability of Polymeric Matrix Composites presents a comprehensive knowledge-set of matrix, fiber and interphase behavior under long-term aging conditions, theoretical modeling and experimental methods. This book covers long-term constituent behavior, predictive methodologies, experimental validation and design practice. Readers will also find a discussion of various applications, including aging air craft structures, aging civil infrastructure, in addition to engines and high temperature applications.

Download or read book American Society for Composites written by Michael Hyer and published by DEStech Publications, Inc. This book was released on 2011-06-28 with total page 2760 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ageing of Composites written by Rod Martin and published by Elsevier. This book was released on 2008-08-29 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ageing of composites is a highly topical subject given the increasing use of composites in structural applications in many industries. Ageing of composites addresses many of the uncertainties about the long-term performance of composites and how they age under conditions encountered in service.The first part of the book reviews processes and modelling of composite ageing including physical and chemical ageing of polymeric composites, ageing of glass-ceramic matrix composites, chemical ageing mechanisms, stress corrosion cracking, thermo-oxidative ageing, spectroscopy of ageing composites, modelling physical and accelerated ageing and ageing of silicon carbide composites. Part two examines ageing of composites in transport applications including aircraft, vehicles and ships. Part three reviews ageing of composites in non-transport applications such as implants in medical devices, oil and gas refining, construction, chemical processing and underwater applications.With its distinguished editor and international team of contributors, Ageing of composites is a valuable reference guide for composite manufacturers and developers. It also serves as a source of information for material scientists, designers and engineers in industries that use composites, including transport, chemical processing and medical engineering. Addresses many of the uncertainties about the long-term performance of composites and how they age under conditions encountered in service Reviews processes and modelling of composite ageing including chemical ageing mechanisms and stress corrosion cracking Discusses ageing of composites in both transport and non-transport applications ranging from aircraft to implants in medical devices

Download or read book Multiscale Modeling and Simulation of Composite Materials and Structures written by Young Kwon and published by Springer Science & Business Media. This book was released on 2007-12-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.

Download or read book Failure of Polymer Products Due to Thermo oxidation written by D. C. Wright and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined effects of oxidising media and heat result in degradation by thermo-oxidation. The principles and cases described in this review emphasise long term degradation in service. Two additional phenomena that influence thermo-oxidation are also described: catalysis by certain metal ions, and the influence of stress. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.

Download or read book Nontraditional Methods of Sensing Stress Strain and Damage in Materials and Structures written by David A. Stubbs and published by ASTM International. This book was released on 1997 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: These facsimiles of 16 contributions from the symposium held in May 1996 in Orlando provide information on the behavior of materials and structures. The authors describe novel ways to measure point to point deformation (or strain, when normalized), procedures for measuring crack length and the stres

Download or read book Thermo oxidative Stability of Graphite PMR 15 Composites written by Madhu S. Madhukar and published by . This book was released on 1994 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1994-10 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Time Dependent Constitutive Behavior and Fracture Failure Processes Volume 3 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This the third volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 56 chapters on Time-Dependent Constitutive Fracture and Failure. It presents early findings from experimental and computational investigations on Time Dependent Materials including contributions on Thermal and Mechanical Characterization, Coupled Experimental and Computational Analysis of Fracture Path Selection, Procedures for Mixed Mode Fracture Testing of Bonded Beams, and Experimental Study of Voids in High Strength Aluminum Alloys.

Download or read book Proceedings of the ASME Aerospace Division written by American Society of Mechanical Engineers. Aerospace Division and published by . This book was released on 1996 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of PMR 15 Polyimide Resin Composition in the Thermo Oxidatively Exposed Graphite Fiber Composites written by and published by . This book was released on 1980 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions of individual resin components to total resin weight loss in 600 deg F air aged Celion 6000/PMR-15 polyimide composites were determined from the overall resin weight loss in the composite by chemically separating the PMR-15 matrix resin into its monomeric components. The individual resin components were also analyzed by spectroscopic techniques in order to elucidate curing and degradation mechanisms of the PMR-15 matrix resin. The isothermal weight loss of the individual resin components during prolonged 600 deg F thermo-oxidative aging of the composite was correlated to the changes observed in the Fourier Transform infrared spectra and Fourier Transform nuclear magnetic resonance spectra of the individual resin components. The correlation was used to identify the molecular site of the thermo-oxidative changes in PMR-15 polyimide matrix resin during 600 deg F curing and prolonged 600 deg F thermo-oxidative aging. jg p.2.

Download or read book Carbon Fibers and Their Composites written by Peter Morgan and published by CRC Press. This book was released on 2005-05-20 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most literature pertaining to carbon fibers is of a theoretical nature. Carbon Fibers and their Composites offers a comprehensive look at the specific manufacturing of carbon fibers and graphite fibers into the growing surge of diverse applications that include flameproof materials, protective coatings, biomedical and prosthetics application