Download or read book Thermal Recovery of Oil and Bitumen written by Roger M. Butler and published by Englewood Cliffs, N.J. : Prentice Hall. This book was released on 1991 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the recovery of heavy oils and bitumen by in situ thermal methods and discusses the technical factors and problems involved. The book summarizes, in a quantitative manner, techniques used in current petroleum industry practice.
Download or read book Thermal Recovery of Oil and Bitumen written by Roger M. Butler and published by Calgary : GravDrain Incorporated. This book was released on 1997-01-01 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Enhanced Recovery Methods for Heavy Oil and Tar Sands written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2016-02-24 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Enhanced Recovery Methods for Heavy Oil and Tar Sands, Second Edition, explores the importance of enhanced oil recovery (EOR) and how it has grown in recent years thanks to the increased need to locate unconventional resources such as heavy oil and shale. Unfortunately, petroleum engineers and managers aren't always well-versed in the enhancement methods that are available when needed or the most economically viable solution to maximize their reservoir's productivity. This revised new edition presents all the current methods of recovery available, including the pros and cons of each. Expanded and updated as a great preliminary text for the newcomer to the industry or subject matter, this must-have EOR guide teaches all the basics needed, including all thermal and non-thermal methods, along with discussions of viscosity, sampling, and the technologies surrounding offshore applications. - Enables users to quickly learn how to choose the most efficient recovery method for their reservoir while evaluating economic conditions - Presents the differences between each method of recovery with newly added real-world case studies from around the world - Helps readers stay competitive with the growing need of extracting unconventional resources with new content on how these complex reservoirs interact with injected reservoir fluids
Download or read book Thermal Methods of Oil Recovery written by Jacques Burger and published by Butterworth-Heinemann. This book was released on 1985 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hybrid Enhanced Oil Recovery Processes for Heavy Oil Reservoirs written by Xiaohu Dong and published by Elsevier. This book was released on 2021-10-27 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Enhanced Oil Recovery Processes for Heavy Oil Reservoirs, Volume 73 systematically introduces these technologies. As the development of heavy oil reservoirs is emphasized, the petroleum industry is faced with the challenges of selecting cost-effective and environmentally friendly recovery processes. This book tackles these challenges with the introduction and investigation of a variety of hybrid EOR processes. In addition, it addresses the application of these hybrid EOR processes in onshore and offshore heavy oil reservoirs, including theoretical, experimental and simulation approaches. This book will be very useful for petroleum engineers, technicians, academics and students who need to study the hybrid EOR processes, In addition, it will provide an excellent reference for field operations by the petroleum industry. - Introduces emerging hybrid EOR processes and their technical details - Includes case studies to help readers understand the application potential of hybrid EOR processes from different points-of-view - Features theoretical, experimental and simulation studies to help readers understand the advantages and challenges of each process
Download or read book Thermal Recovery written by Michael Prats and published by . This book was released on 1982 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Processing of Hydrocarbons written by Dwijen K. Banerjee and published by Pennwell Books. This book was released on 2019 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a must-read for the latest generation of scientists, engineers, and researchers in the petroleum industry. The product of over four decades of research, experience, and study by Dr. Dwijen Banerjee, who carefully preserves the history of the thermal processing of hydrocarbons, giving credit to the pioneering scientists and discoverers of the process. In this first-of-its-kind book, the author summarizes and systematically leads readers through all aspects of the thermal cracking processes from the research laboratory to the commercial applications of the petrochemical industry. Fossil fuels consist of a continuous series of hydrocarbons mainly divided into natural gas (C1-C4), conventional crude oil (C5-C40), heavy oil/bitumen (>C40). This book discusses thermal processing of hydrocarbons -- with a special emphasis on lighter hydrocarbons -- whose main source is shale gas and tight oil that's recently been made abundant through fracking technology. This book details many technical parameters involved in choosing a process when considering the type of feedstocks; operating conditions; selectivity of the desired product; the market to be targeted; and the environmental regulations to be met while also considering the economic parameters such as the investment and profit margin that govern the final choice. Features and Benefits An introduction to the basic chemistry behind thermal processing, classifications, molecular structures, kinetics and thermodynamics, free radical reaction mechanisms, and product distributions. A focus on shale gas and tight oil production, properties, and processing as important sources of petrochemicals. Emphasis on the 'petroleum to petrochemicals' which has recently transformed the petroleum industry across the globe. An illustration of conversion technologies -- how the paraffinic hydrocarbons are converted into various petrochemicals and eventually lead to the finished products. Insight into the future of hydrocarbons based on environmental issues. Audience Scientists Engineers Researchers Students
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Enhanced Oil Recovery written by Patrizio Raffa and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-07-22 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at presenting, describing, and summarizing the latest advances in polymer flooding regarding the chemical synthesis of the EOR agents and the numerical simulation of compositional models in porous media, including a description of the possible applications of nanotechnology acting as a booster of traditional chemical EOR processes. A large part of the world economy depends nowadays on non-renewable energy sources, most of them of fossil origin. Though the search for and the development of newer, greener, and more sustainable sources have been going on for the last decades, humanity is still fossil-fuel dependent. Primary and secondary oil recovery techniques merely produce up to a half of the Original Oil In Place. Enhanced Oil Recovery (EOR) processes are aimed at further increasing this value. Among these, chemical EOR techniques (including polymer flooding) present a great potential in low- and medium-viscosity oilfields. • Describes recent advances in chemical enhanced oil recovery. • Contains detailed description of polymer flooding and nanotechnology as promising boosting tools for EOR. • Includes both experimental and theoretical studies. About the Authors Patrizio Raffa is Assistant Professor at the University of Groningen. He focuses on design and synthesis of new polymeric materials optimized for industrial applications such as EOR, coatings and smart materials. He (co)authored about 40 articles in peer reviewed journals. Pablo Druetta works as lecturer at the University of Groningen (RUG) and as engineering consultant. He received his Ph.D. from RUG in 2018 and has been teaching at a graduate level for 15 years. His research focus lies on computational fluid dynamics (CFD).
Download or read book Thermal Recovery Methods written by Philip Davidson White and published by . This book was released on 1983 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Efficient Simulation of Thermal Enhanced Oil Recovery Processes written by Zhouyuan Zhu and published by Stanford University. This book was released on 2011 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulating thermal processes is usually computationally expensive because of the complexity of the problem and strong nonlinearities encountered. In this work, we explore novel and efficient simulation techniques to solve thermal enhanced oil recovery problems. We focus on two major topics: the extension of streamline simulation for thermal enhanced oil recovery and the efficient simulation of chemical reaction kinetics as applied to the in-situ combustion process. For thermal streamline simulation, we first study the extension to hot water flood processes, in which we have temperature induced viscosity changes and thermal volume changes. We first compute the pressure field on an Eulerian grid. We then solve for the advective parts of the mass balance and energy equations along the individual streamlines, accounting for the compressibility effects. At the end of each global time step, we account for the nonadvective terms on the Eulerian grid along with gravity using operator splitting. We test our streamline simulator and compare the results with a commercial thermal simulator. Sensitivity studies for compressibility, gravity and thermal conduction effects are presented. We further extended our thermal streamline simulation to steam flooding. Steam flooding exhibits large volume changes and compressibility associated with the phase behavior of steam, strong gravity segregation and override, and highly coupled energy and mass transport. To overcome these challenges we implement a novel pressure update along the streamlines, a Glowinski scheme operator splitting and a preliminary streamline/finite volume hybrid approach. We tested our streamline simulator on a series of test cases. We compared our thermal streamline results with those computed by a commercial thermal simulator for both accuracy and efficiency. For the cases investigated, we are able to retain solution accuracy, while reducing computational cost and gaining connectivity information from the streamlines. These aspects are useful for reservoir engineering purposes. In traditional thermal reactive reservoir simulation, mass and energy balance equations are solved numerically on discretized reservoir grid blocks. The reaction terms are calculated through Arrhenius kinetics using cell-averaged properties, such as averaged temperature and reactant concentrations. For the in-situ combustion process, the chemical reaction front is physically very narrow, typically a few inches thick. To capture accurately this front, centimeter-sized grids are required that are orders of magnitude smaller than the affordable grid block sizes for full field reservoir models. To solve this grid size effect problem, we propose a new method based on a non-Arrhenius reaction upscaling approach. We do not resolve the combustion front on the grid, but instead use a subgrid-scale model that captures the overall effects of the combustion reactions on flow and transport, i.e. the amount of heat released, the amount of oil burned and the reaction products generated. The subgrid-scale model is calibrated using fine-scale highly accurate numerical simulation and laboratory experiments. This approach significantly improves the computational speed of in-situ combustion simulation as compared to traditional methods. We propose the detailed procedures to implement this methodology in a field-scale simulator. Test cases illustrate the solution consistency when scaling up the grid sizes in multidimensional heterogeneous problems. The methodology is also applicable to other subsurface reactive flow modeling problems with fast chemical reactions and sharp fronts. Displacement front stability is a major concern in the design of all the enhanced oil recovery processes. Historically, premature combustion front break through has been an issue for field operations of in-situ combustion. In this work, we perform detailed analysis based on both analytical methods and numerical simulation. We identify the different flow regimes and several driving fronts in a typical 1D ISC process. For the ISC process in a conventional mobile heavy oil reservoir, we identify the most critical front as the front of steam plateau driving the cold oil bank. We discuss the five main contributors for this front stability/instability: viscous force, condensation, heat conduction, coke plugging and gravity. Detailed numerical tests are performed to test and rank the relative importance of all these different effects.
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Asphaltenes and Asphalts 1 written by G.V. Chilingarian and published by Elsevier. This book was released on 1994-09-08 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume of a two-volume set of critical reviews of many aspects of both asphaltenes and asphalts and their interrelationship. Asphaltene is invariably present in asphalt or bitumen and other fossil fuel-derived liquids such as coal tar, coal liquefaction products, pyrolyzed shale oil from oil shales, source rock extracts and numerous naturally occurring bituminous substances. The latter include asphaltites, asphaltoids, waxes, and carbonaceous deposits containing a composition of petroleum and coal.The contents cover not only the basic science of asphaltene but also deal with the applications and technology such as upstreams (production, recovery) and down streams (refining, upgrading) of petroleum, and the paving technology and formulation preparation. The main features of the book are: it provides an up-to-date, in-depth review of every aspect of asphaltenes and asphalts; it spans five decades of research and technology of heavy fractions of petroleum; it presents a global view of asphaltene related to exploration production, refining and upgrading.The book will be welcomed as a valuable reference source for petroleum companies, research institutes, refineries, universities and also by individuals dealing with the production, origin, formation, engineering, conversion and catalysis of heavy oil, tar sands and other bitumens materials.
Download or read book Heavy Oil Production Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2013-03-05 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: As conventional-oil resources are depleted worldwide, vast heavy oil reserves available in various parts of the world become increasingly important as a secure future energy source. Brief but readable, Heavy Oil Production Processes discusses the latest improvements in production processes including; thermal methods (steam floods, cyclic steam stimulation, SAGD) as well as non-thermal methods (cold flow with sand production, cyclic solvent process, VAPEX). The book begins with an overview of the chemistry, engineering, and technology of heavy oil as they evolve into the twenty-first century. The preceding chapters are written to provide a basic understanding of each technology, evolving processes and new processes as well as the various environmental regulations. Clear and rigorous, Heavy Oil Production Processes will prove useful for those scientists and engineers already engaged in fossil fuel science and technology as well as scientists, non-scientists, engineers, and non-engineers who wish to gain a general overview or update of the science and technology of fossil fuels. The not only does the book discuss the production processes but also provides methods which should reduce environmental footprint and improve profitability. - Overview of the chemistry, engineering, and technology of oil sands - Updates on the evolving processes and new processes - Evolving and new environmental regulations regarding oil sands production
Download or read book Carbon Dioxide Chemistry Capture and Oil Recovery written by Iyad Karamé and published by BoD – Books on Demand. This book was released on 2018-08-16 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil fuels still need to meet the growing demand of global economic development, yet they are often considered as one of the main sources of the CO2 release in the atmosphere. CO2, which is the primary greenhouse gas (GHG), is periodically exchanged among the land surface, ocean, and atmosphere where various creatures absorb and produce it daily. However, the balanced processes of producing and consuming the CO2 by nature are unfortunately faced by the anthropogenic release of CO2. Decreasing the emissions of these greenhouse gases is becoming more urgent. Therefore, carbon sequestration and storage (CSS) of CO2, its utilization in oil recovery, as well as its conversion into fuels and chemicals emerge as active options and potential strategies to mitigate CO2 emissions and climate change, energy crises, and challenges in the storage of energy.
Download or read book Enhanced Oil Recovery Field Case Studies written by James J.Sheng and published by Gulf Professional Publishing. This book was released on 2013-04-10 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced Oil Recovery Field Case Studies bridges the gap between theory and practice in a range of real-world EOR settings. Areas covered include steam and polymer flooding, use of foam, in situ combustion, microorganisms, "smart water"-based EOR in carbonates and sandstones, and many more. Oil industry professionals know that the key to a successful enhanced oil recovery project lies in anticipating the differences between plans and the realities found in the field. This book aids that effort, providing valuable case studies from more than 250 EOR pilot and field applications in a variety of oil fields. The case studies cover practical problems, underlying theoretical and modeling methods, operational parameters, solutions and sensitivity studies, and performance optimization strategies, benefitting academicians and oil company practitioners alike. - Strikes an ideal balance between theory and practice - Focuses on practical problems, underlying theoretical and modeling methods, and operational parameters - Designed for technical professionals, covering the fundamental as well as the advanced aspects of EOR
Download or read book Thermal Methods written by Abdolhossein Hemmati-Sarapardeh and published by Gulf Professional Publishing. This book was released on 2023-04-18 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Methods, Volume Two, the latest release in the Enhanced Oil Recovery series, helps engineers focus on the latest developments in this fast-growing area. In the book, different techniques are described in addition to the latest technologies in data mining and hybrid processes. Supported field case studies are included to illustrate a bridge between research and practical applications, making it useful for both academics and practicing engineers. Structured to start with thermal concepts and steam flooding, the book's editors then advance to more complex content, guiding engineers into areas such as hybrid thermal methods and edgier technologies that bridge solar and nuclear energy. Supported by a full spectrum of contributors, this book gives petroleum engineers and researchers the latest research developments and field applications to drive innovation for the future of energy. - Presents the latest understanding surrounding the updated research and practical applications specific to thermal enhanced oil recovery methods - Provides an analysis of editors' research on available technology, including hybrid thermal-solvent processes and dual pipe configurations - Teaches about additional methods, such as data mining applications, and economic and environmental considerations
