Download or read book The Single Crystal Synthesis and Some Properties of Aluminum Nitride written by Cortland O. Dugger and published by . This book was released on 1975 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This final report, which covers the period from March 1972 to 30 June 1975, discusses some conditions for the synthesis of aluminum nitride (AIN) single crystals from solution. The solvent systems used are unique and novel. The average sized, water-white, bipyramidal AIN single crystals reproducibly grown from solution only were 1.1 mm long X 0.3 mm wide. The average sized, AIN single crystals grown from a combined solution-vapor reaction technique were 4mm long X 3 mm wide X 2mm thick. The in-house quantitative evaluation of the crystals was restricted to Laue patterns and emission spectrometry only. In Appendices A, B, C, and D, general discussions of solution growth, other AIN growth methods, some properties of AIN, and a very brief discussion of the newly emerging surface acoustic wave (SAW) device technology and why the use of AIN is considered a good electro-acoutic material in SAW devices are presented. (Author).
Download or read book High Thermal Conductivity Materials written by Subhash L. Shinde and published by Springer Science & Business Media. This book was released on 2006-01-31 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to cover the basic understanding of thermal conduction mechanisms in various high thermal conductivity materials including diamond, cubic boron nitride, and also the latest material like carbon nanotubes. The book is intended as a good reference book for scientists and engineers involved in addressing thermal management issues in a broad spectrum of industries. Leading researchers from industry and academic institutions who are well known in their areas of expertise have contributed a chapter in the field of their interest.
Download or read book Properties of Advanced Semiconductor Materials written by Michael E. Levinshtein and published by John Wiley & Sons. This book was released on 2001-02-21 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the most reliable parameter values for each of these semiconductor materials, along with applicable references, these data are organized in a structured, logical way for each semiconductor material. * Reviews traditional semiconductor materials as well as new, advanced semiconductors. * Essential authoritative handbook on the properties of semiconductor materials.
Download or read book Carbide Nitride and Boride Materials Synthesis and Processing written by A.W. Weimer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbide, Nitride and Boride Materials Synthesis and Processing is a major reference text addressing methods for the synthesis of non-oxides. Each chapter has been written by an expert practising in the subject area, affiliated with industry, academia or government research, thus providing a broad perspective of information for the reader. The subject matter ranges from materials properties and applications to methods of synthesis including pre- and post-synthesis processing. Although most of the text is concerned with the synthesis of powders, chapters are included for other materials such as whiskers, platelets, fibres and coatings. Carbide, Nitride and Boride Materials Synthesis and Processing is a comprehensive overview of the subject and is suitable for practitioners in the industry as well as those looking for an introduction to the field. It will be of interest to chemical, mechanical and ceramic engineers, materials scientists and chemists in both university and industrial environments working on or with refractory carbides, nitrides and borides.
Download or read book Advanced Computing written by Michael Bader and published by Springer Science & Business Media. This book was released on 2013-09-26 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume collects review articles that summarize research conducted at the Munich Centre of Advanced Computing (MAC) from 2008 to 2012. The articles address the increasing gap between what should be possible in Computational Science and Engineering due to recent advances in algorithms, hardware, and networks, and what can actually be achieved in practice; they also examine novel computing architectures, where computation itself is a multifaceted process, with hardware awareness or ubiquitous parallelism due to many-core systems being just two of the challenges faced. Topics cover both the methodological aspects of advanced computing (algorithms, parallel computing, data exploration, software engineering) and cutting-edge applications from the fields of chemistry, the geosciences, civil and mechanical engineering, etc., reflecting the highly interdisciplinary nature of the Munich Centre of Advanced Computing.
Download or read book Electronic Materials Handbook written by and published by ASM International. This book was released on 1989-11-01 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1: Packaging is an authoritative reference source of practical information for the design or process engineer who must make informed day-to-day decisions about the materials and processes of microelectronic packaging. Its 117 articles offer the collective knowledge, wisdom, and judgement of 407 microelectronics packaging experts-authors, co-authors, and reviewers-representing 192 companies, universities, laboratories, and other organizations. This is the inaugural volume of ASMAs all-new ElectronicMaterials Handbook series, designed to be the Metals Handbook of electronics technology. In over 65 years of publishing the Metals Handbook, ASM has developed a unique editorial method of compiling large technical reference books. ASMAs access to leading materials technology experts enables to organize these books on an industry consensus basis. Behind every article. Is an author who is a top expert in its specific subject area. This multi-author approach ensures the best, most timely information throughout. Individually selected panels of 5 and 6 peers review each article for technical accuracy, generic point of view, and completeness.Volumes in the Electronic Materials Handbook series are multidisciplinary, to reflect industry practice applied in integrating multiple technology disciplines necessary to any program in advanced electronics. Volume 1: Packaging focusing on the middle level of the electronics technology size spectrum, offers the greatest practical value to the largest and broadest group of users. Future volumes in the series will address topics on larger (integrated electronic assemblies) and smaller (semiconductor materials and devices) size levels.
Download or read book Thermal Conductivity written by C.J. Cremers and published by Springer Science & Business Media. This book was released on 1990 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fifty-one papers (and three keynote addresses) on contemporary theoretical issues and experimental techniques pertaining to the underlying factors that control heat-conduction behavior of materials. The latest findings on insulation, fluids, and low-dimensional solids and composites are reviewed as
Download or read book Comprehensive Inorganic Chemistry II written by and published by Newnes. This book was released on 2013-07-23 with total page 7694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Inorganic Chemistry II, Nine Volume Set reviews and examines topics of relevance to today’s inorganic chemists. Covering more interdisciplinary and high impact areas, Comprehensive Inorganic Chemistry II includes biological inorganic chemistry, solid state chemistry, materials chemistry, and nanoscience. The work is designed to follow on, with a different viewpoint and format, from our 1973 work, Comprehensive Inorganic Chemistry, edited by Bailar, Emeléus, Nyholm, and Trotman-Dickenson, which has received over 2,000 citations. The new work will also complement other recent Elsevier works in this area, Comprehensive Coordination Chemistry and Comprehensive Organometallic Chemistry, to form a trio of works covering the whole of modern inorganic chemistry. Chapters are designed to provide a valuable, long-standing scientific resource for both advanced students new to an area and researchers who need further background or answers to a particular problem on the elements, their compounds, or applications. Chapters are written by teams of leading experts, under the guidance of the Volume Editors and the Editors-in-Chief. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource for information in the field. The chapters will not provide basic data on the elements, which is available from many sources (and the original work), but instead concentrate on applications of the elements and their compounds. Provides a comprehensive review which serves to put many advances in perspective and allows the reader to make connections to related fields, such as: biological inorganic chemistry, materials chemistry, solid state chemistry and nanoscience Inorganic chemistry is rapidly developing, which brings about the need for a reference resource such as this that summarise recent developments and simultaneously provide background information Forms the new definitive source for researchers interested in elements and their applications; completely replacing the highly cited first edition, which published in 1973
Download or read book Mechanical and Thermal Properties of Advanced Ceramics for Gun Barrel Applications written by Jeffrey J. Swab and published by . This book was released on 2005-02 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eight commercially available ceramic materials were procured and evaluated for potential application as gun barrel liners. These materials included an alumina, zirconia, and SiAlON, as well as three silicon carbides and two silicon nitrides. Preliminary evaluation determined the strengths, fracture toughness, Vickers hardness, thermal conductivity, specific heat, and linear coefficient of thermal expansion. An uncensored Weibull analysis was performed on all of the strength data. These databases were developed for use in the probabilistic modeling and design efforts of the program to predict performance, identify optimum gun barrel designs, and to rank and down select ceramics for further evaluation.
Download or read book Tailoring of Mechanical Properties of Si3N4 Ceramics written by Michael J. Hoffmann and published by Springer Science & Business Media. This book was released on 2012-02-02 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop on `Tailoring of High Temperature Properties of Si3N4 Ceramics', Schloß Ringberg/Munich, Germany, October 6--9, 1993
Download or read book Fabrication of Heat Resistant and Plastic Formable Silicon Nitride written by Toshiyuki Nishimura and published by Springer. This book was released on 2015-07-23 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, improvements in the heat resistance of silicon nitride (Si3N4) ceramics using grain boundary control and in plasticity at high temperatures using grain size control in order to reduce the cost of shaping Si3N4 are described. The heat resistance of Si3N4 is improved by mixing a slight amount of sintering additive as an impurity into the original material powder. The author presents his findings on the high heat resistance of Si3N4. The author also develops a new fabrication method for Si3N4 nano-ceramics that produces high plastic formability. The method developed offers two improved points in grinding and sintering processes. The author found that the plastic formability of Si3N4 nanoceramics is dependent on load stress; the results of his research are detailed in this book.
Download or read book Polyimides written by Doug Wilson and published by Springer. This book was released on 2014-08-23 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last twenty years or so have seen a flurry of activity in the synthesis of new polymer systems. This interest has developed largely as a result of the increased need for advanced materials. Despite the emergence of a number of outstanding polymers, it is the polyimides that have captured the imagination of scientists and engineers alike as materials that offer outstanding promise for the high technology applic ations of the future. The reputation of the polyimide has been established on the bases of outstanding thermal stability, excellent mechanical properties and the ability to be fabricated into useful articles. Polyimides offer a versatility unparalleled in most other classes of macromolecules. Polymers can be prepared from a variety of starting materials, by a variety of synthetic routes. They can be tailor-made to suit specific applications. By judicious choice of starting materials, polymers can be made that offer variations in such properties as glass transition tempera ture, oxidative stability, toughness, adhesion, and permeability. It is this versatility that has led to the use of polyimides in a wide variety of applications. The electronics industry makes extensive use of poly imide films in, ior example, semiconductor applications. The leading polymer matrices for high temperature advanced composites are polyimides. High temperature adhesive systems for the bonding of metals or composites are often based on polyimides. In addition, polyimides are now finding use as fibres, foams, sealents and even membranes for the low energy separation of industrial gases.
Download or read book Advances in Cryogenic Engineering Materials written by A. F. Clark and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third International Cryogenic Materials Conference (ICMC) was held in Madison, Wisconsin, in conjunction with the Cryogenic Engineering Conference (CEC) in August 1979. The University of Wisconsin hosted the two conferences in an excellent manner and deserves special recognition and praise. The synergism produced by conducting the two conferences simultaneously continues to be strong. Materials remain a demanding challenge and, in some cases, an obstacle to effective application of cryogenic technology. The association of materials specialists and cryogenic engineers every other year centers their attention on the most needed areas of research. The present ICMC Board met during the conference and elected two new members, E. W. Collings (U. S.) and D. Evans (England). The board voted to conduct two smaller, special-topic conferences in 1980. These are Filamentary A15 Superconductors, which was held at Brookhaven National Laboratories, Upton, New York in May 1980, and Fundamentals of Nonmetallics and Composites at Low Temperatures, held in Geneva, Switzerland in August 1980. The 1981 CEC/ICMC will be held August 10 through 14 in San Diego, California.
Download or read book Comprehensive Nuclear Materials written by Todd R Allen and published by Elsevier. This book was released on 2011-05-12 with total page 3552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nuclear Materials, Five Volume Set discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials. The work addresses the full panorama of contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds' leading scientists and engineers. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environment Fully integrated with F-elements.net, a proprietary database containing useful cross-referenced property data on the lanthanides and actinides Details contemporary developments in numerical simulation, modelling, experimentation, and computational analysis, for effective implementation in labs and plants
Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
Download or read book Molecular Dynamics Simulations of Disordered Materials written by Carlo Massobrio and published by Springer. This book was released on 2015-04-22 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a unique reference work in the area of atomic-scale simulation of glasses. For the first time, a highly selected panel of about 20 researchers provides, in a single book, their views, methodologies and applications on the use of molecular dynamics as a tool to describe glassy materials. The book covers a wide range of systems covering "traditional" network glasses, such as chalcogenides and oxides, as well as glasses for applications in the area of phase change materials. The novelty of this work is the interplay between molecular dynamics methods (both at the classical and first-principles level) and the structure of materials for which, quite often, direct experimental structural information is rather scarce or absent. The book features specific examples of how quite subtle features of the structure of glasses can be unraveled by relying on the predictive power of molecular dynamics, used in connection with a realistic description of forces.
Download or read book Thermal Conductivity written by Terry M. Tritt and published by Springer Science & Business Media. This book was released on 2006-10-03 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been almost thirty years since the publication of a book that is entirely dedicated to the theory, description, characterization and measurement of the thermal conductivity of solids. The recent discovery of new materials which possess more complex crystal structures and thus more complicated phonon scattering mechanisms have brought innovative challenges to the theory and experimental understanding of these new materials. With the development of new and novel solid materials and new measurement techniques, this book will serve as a current and extensive resource to the next generation researchers in the field of thermal conductivity. This book is a valuable resource for research groups and special topics courses (8-10 students), for 1st or 2nd year graduate level courses in Thermal Properties of Solids, special topics courses in Thermal Conductivity, Superconductors and Magnetic Materials, and to researchers in Thermoelectrics, Thermal Barrier Materials and Solid State Physics.
