Download or read book Thermal Management of Electronic Systems written by C.J. Hoogendoorn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Eurotherm Committee has chosen Thermal Management of Electronic Systems as the subject of its 29th Seminar, at Delft University of Technology, the Netherlands, 14-16 June 1993. This volume constitutes the proceedings of the Seminar. Thermal Management is but one of the several critical topics in the design of electronic systems. However, as a result of the combined effects of increasing heat fluxes, miniaturisation and the striving for zero defects, preferably in less time and at a lower cost than before, thermal management has become an increasingly tough challenge. Therefore, it is being increasingly recognised that cooling requirements could eventually hamper the technical progress in miniaturisation. It might be argued that we are on the verge of a revolution in thermal management techniques. Previously, a packaging engineer had no way of predicting the tempera tures of critical electronic parts with the required accuracy. He or she· had to rely on full-scale experiments, doubtful design rules, or worst-case estimates. This situation is going to be changed in the foreseeable future. User-friendly software tools, the acquisition and integrity of input and output data, the badly needed training mea sures, the introduction into a concurrent engineering environment: all these items will exert a heavy toll on the flexibility of the electronics industries. Fortunately, this situation is being realised at the appropriate management levels, and the interest in this seminar and the pre-conference tutorials testifies to this assertion.
Download or read book Thermal Management of Electronic Systems II written by E. Beyne and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the second time, the Eurotherm Committee has chosen Thermal Managment of Electronic Systems as the subject for its 45th Seminar, held at IMEC in Leuven, Belgium, from 20 to 22 September 1995. After the successfui first edition of this seminar in Delft, June 14-16, 1993, it was decided to repeat this event on a two year basis. This volume constitutes the edited proceedings of the Seminar. Thermal management of electronic systems is gaining importance. Whereas a few years ago papers on this subject where mainly devoted to applications in high end markets, such as mainframes and telecommunication switching equipment, we see a growing importance in the "lower" end applications. This may be understood from the growing impact of electronics on every day life, from car electronics, GSM phones, personal computers to electronic games. These applications add new requirements to the thermal design. The thermal problem and the applicable cooling strategies are quite different from those in high end products. In this seminar the latest developments in many of the different aspects of the thermal design of electronic systems were discussed. Particular attention was given to thermal modelling, experimental characterisation and the impact of thermal design on the reliability of electronic systems.
Download or read book Heat Pipes written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-10-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Pipes, Sixth Edition, takes a highly practical approach to the design and selection of heat pipes, making it an essential guide for practicing engineers and an ideal text for postgraduate students.This new edition has been revised to include new information on the underlying theory of heat pipes and heat transfer, and features fully updated applications, new data sections, and updated chapters on design and electronics cooling. The book is a useful reference for those with experience and an accessible introduction for those approaching the topic for the first time. - Contains all information required to design and manufacture a heat pipe - Suitable for use as a professional reference and graduate text - Revised with greater coverage of key electronic cooling applications
Download or read book Heat Transfer written by Younes Shabany and published by CRC Press. This book was released on 2009-12-17 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuing trend toward miniaturization and high power density electronics results in a growing interdependency between different fields of engineering. In particular, thermal management has become essential to the design and manufacturing of most electronic systems.Heat Transfer: Thermal Management of Electronics details how engineers can use
Download or read book Advanced Materials for Thermal Management of Electronic Packaging written by Xingcun Colin Tong and published by Springer Science & Business Media. This book was released on 2011-01-05 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for advanced thermal management materials in electronic packaging has been widely recognized as thermal challenges become barriers to the electronic industry’s ability to provide continued improvements in device and system performance. With increased performance requirements for smaller, more capable, and more efficient electronic power devices, systems ranging from active electronically scanned radar arrays to web servers all require components that can dissipate heat efficiently. This requires that the materials have high capability of dissipating heat and maintaining compatibility with the die and electronic packaging. In response to critical needs, there have been revolutionary advances in thermal management materials and technologies for active and passive cooling that promise integrable and cost-effective thermal management solutions. This book meets the need for a comprehensive approach to advanced thermal management in electronic packaging, with coverage of the fundamentals of heat transfer, component design guidelines, materials selection and assessment, air, liquid, and thermoelectric cooling, characterization techniques and methodology, processing and manufacturing technology, balance between cost and performance, and application niches. The final chapter presents a roadmap and future perspective on developments in advanced thermal management materials for electronic packaging.
Download or read book Qpedia Thermal Management Electronics Cooling Book Volume 3 written by Advanced Thermal Solutions and published by Advanced Thermal Solutions. This book was released on 2009 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete editorial contents of Qpedia Thermal eMagazine, Volume 3, Issues 1 - 12 features in-depth, technical articles covering the most critical areas of electronics cooling.
Download or read book Thermal Management for Opto electronics Packaging and Applications written by Xiaobing Luo and published by John Wiley & Sons. This book was released on 2024-05-29 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic guide to the theory, applications, and design of thermal management for LED packaging In Thermal Management for Opto-electronics Packaging and Applications, a team of distinguished engineers and researchers deliver an authoritative discussion of the fundamental theory and practical design required for LED product development. Readers will get a solid grounding in thermal management strategies and find up-to-date coverage of heat transfer fundamentals, thermal modeling, and thermal simulation and design. The authors explain cooling technologies and testing techniques that will help the reader evaluate device performance and accelerate the design and manufacturing cycle. In this all-inclusive guide to LED package thermal management, the book provides the latest advances in thermal engineering design and opto-electronic devices and systems. The book also includes: A thorough introduction to thermal conduction and solutions, including discussions of thermal resistance and high thermal conductivity materials Comprehensive explorations of thermal radiation and solutions, including angular- and spectra-regulation radiative cooling Practical discussions of thermally enhanced thermal interfacial materials (TIMs) Complete treatments of hybrid thermal management in downhole devices Perfect for engineers, researchers, and industry professionals in the fields of LED packaging and heat transfer, Thermal Management for Opto-electronics Packaging and Applications will also benefit advanced students focusing on the design of LED product design.
Download or read book Heat Management in Integrated Circuits written by Seda Ogrenci-Memik and published by IET. This book was released on 2015-12 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Management in Integrated Circuits focuses on devices and materials that are intimately integrated on-chip (as opposed to in package or on-board) for the purposes of thermal monitoring and thermal management, i.e., cooling. The devices and circuits cover various designs used for the purpose of converting temperature to a digital measurement, heat to electricity, and actively biased circuits that reverse thermal gradients on chips for the purpose of cooling. The book includes fundamental operating principles that touch upon physics of materials that are used to construct sensing, harvesting, and cooling devices, which will be followed by circuit and system design aspects that enable successful functioning of these devices as an on-chip system. Finally, the author discusses the use of these devices and systems for thermal management and the role they play in enabling energy-efficient and sustainable high performance computing systems.
Download or read book Qpedia Thermal Management Electronics Cooling Book Volume 1 written by and published by Advanced Thermal Solutions. This book was released on with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Management of Gallium Nitride Electronics written by Marko Tadjer and published by Woodhead Publishing. This book was released on 2022-07-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Management of Gallium Nitride Electronics outlines the technical approaches undertaken by leaders in the community, the challenges they have faced, and the resulting advances in the field. This book serves as a one-stop reference for compound semiconductor device researchers tasked with solving this engineering challenge for future material systems based on ultra-wide bandgap semiconductors. A number of perspectives are included, such as the growth methods of nanocrystalline diamond, the materials integration of polycrystalline diamond through wafer bonding, and the new physics of thermal transport across heterogeneous interfaces. Over the past 10 years, the book's authors have performed pioneering experiments in the integration of nanocrystalline diamond capping layers into the fabrication process of compound semiconductor devices. Significant research efforts of integrating diamond and GaN have been reported by a number of groups since then, thus resulting in active thermal management options that do not necessarily lead to performance derating to avoid self-heating during radio frequency or power switching operation of these devices. Self-heating refers to the increased channel temperature caused by increased energy transfer from electrons to the lattice at high power. This book chronicles those breakthroughs. - Includes the fundamentals of thermal management of wide-bandgap semiconductors, with historical context, a review of common heating issues, thermal transport physics, and characterization methods - Reviews the latest strategies to overcome heating issues through materials modeling, growth and device design strategies - Touches on emerging, real-world applications for thermal management strategies in power electronics
Download or read book Qpedia Thermal Management eMagazine Volume 4 written by Kaveh Azar and published by Advanced Thermal Solutions. This book was released on 2011 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete editorial contents of Qpedia Thermal 4, Issues 1 - 12 features 48 in-depth articles that discuss critical case studies, calculations and analysis for thermal engineering professionals and academia.
Download or read book 4th International Symposium of Space Optical Instruments and Applications written by H. Paul Urbach and published by Springer. This book was released on 2018-10-05 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected and expanded contributions presented at the 4th Symposium on Space Optical Instruments and Applications, which was held in Delft, the Netherlands, on October 16–18, 2017. This conference series is organized by the Sino-Holland Space Optical Instruments Laboratory, a cooperative platform between China and the Netherlands. The symposium focused on key technological problems regarding optical instruments and their applications in a space context. It covered the latest developments, experiments and results on the theory, instrumentation and applications of space optics. The book is split into five main sections: The first covers optical remote sensing system design, the second focuses on advanced optical system design, and the third addresses remote sensor calibration and measurement. Remote sensing data processing and information extraction are then presented, followed by a final section on remote sensing data applications.
Download or read book Emerging Applications of Carbon Nanotubes and Graphene written by Bhanu Pratap Singh and published by CRC Press. This book was released on 2023-02-27 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews recent and emerging applications of carbon nanotubes and graphene materials in a wide range of sectors. Detailed applications include structural materials, ballistic materials, energy storage and conversion, batteries, supercapacitors, smart sensors, environmental protection, nanoelectronics, optoelectronic and photovoltaics, thermoelectric, and conducting wires. It further covers human and structural health monitoring, and thermal management applications. Key selling features: Exclusively takes an application-oriented approach to cover emerging areas in carbon nanotubes and graphene Covers fundamental and applied knowledge related to carbon nanomaterials Includes advanced applications like human and structural health monitoring, smart sensors, ballistic protection and so forth Discusses novel applications such as thermoelectrics along with environmental protection related application Explores aspects of energy storage, generation and conversion including batteries, supercapacitors, and photovoltaics This book is aimed at graduate students and researchers in electrical, nanomaterials, chemistry, and other related areas.
Download or read book Thermal Control Thin Films written by Jia-wen Qiu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-11-08 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents up-to-date thermal control film materials, technologies and applications in spacecraft. Commonly used thermal control film materials and devices for spacecraft are discussed in detail, including single-structure passive thermal control film materials, composite structure passive thermal control film materials, intelligent thermal control film materials, and microstructure thermal control thin film devices.
Download or read book Design and Analysis of Heat Sinks written by Allan D. Kraus and published by Wiley-Interscience. This book was released on 1995-10-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: A powerful methodology for producing superior thermal performance at low cost with minimum added mass . . . Here is the only available comprehensive treatment of the design and analysis of heat sinks. It provides all the theoretical and practical information necessary to successfully design and/or select cost-effective heat sinks for electronic equipment. The presentation includes detailed explanations of the governing heat transfer phenomena, complete coverage of thermal modeling tools for geometrically complex fin structures, and extensive discussion on recognizing thermal optimization opportunities. Other topics covered include: Fundamentals of heat transfer Thermal modeling of electronic packages Mathematical tools for heat-sink analysis and design Prevailing thermal transport processes Models for a variety of fin geometries Simple "transfer function" relations for single fin, cascaded fin, and fin array heat sinks Thermal characterization and optimization of plate-fin heat sinks Completely self-contained and filled with valuable information not available from any other single source, Design and Analysis of Heat Sinks is both a superior reference for accomplished thermal specialists and an excellent textbook for graduate courses in advanced thermal applications for mechanical engineering students. This book can also serve as a text in thermal science for students of electrical engineering.
Download or read book Advanced Thermal Design of Electronic Equipment written by Ralph Remsburg and published by Springer Science & Business Media. This book was released on 1998-02-28 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: With today's high density, high performance electronic systems, packaging and more specifically thermal engineering has become the critical factor that limits on-time product introduction and reliability in the field. This book serves as a reference for engineers who must predict the thermal performance of a company's latest product as well as the technicians who must quickly solve the problem of an overheating chip in a product that is already on the shelves.
Download or read book Active Array Antennas for High Resolution Microwave Imaging Radar written by Jiaguo Lu and published by Springer Nature. This book was released on 2023-05-04 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the application of active array antennas in high-resolution microwave imaging radar systems. It introduces the basic principles, analytical methods, and performance parameters of active array antennas to achieve low profile, high efficiency, and lightweight. The book systematically elaborates the architecture, analysis, and engineering practice to achieve wideband, multi-band, multi-polarization, and common aperture in active array antennas. It explores hotspot technologies of digital array antennas, microwave photonic array antennas, and active packaging antennas. By presenting over 300 illustrations and diagrams, including schematic diagrams, block diagrams, relation diagrams, and breakdown drawings, the book enables a thorough understanding of the antenna array microsystem as the advanced phase of active array antennas and the direction of future R&D. The book is a good reference source for researchers and engineers interested in the engineering and implementation of microwave imaging radar systems and antenna technology.
